Latest lock nut scrap Tenders | Government lock nut scrap Tenders

CTN :45492443

19 Jun, 2026 NA

Kamrup - Assam

Tender For supply of hi mast light , led light 100watt ip 65 , hi mast power panel , nut bolt with base plate , civil work foundation making and installation chagres

CTN :45224280

12 Jun, 2026 NA

Kinnaur - Himachal Pradesh

Tender For corrigendum : supply of excavation , pcc 1 is to 4 is to 8 , pcc 1 is to 3 is to 6 , rcc m40 side walls of entire building including retaining walldrawing , rcc m30 foundation or floor or roof slab and colume padestal , mild steel tmt bar , ms tubes , shuttering plywood , anchor bolt 25mm dia and 850mm , boulder soling , rolling shutter , fire proof painting work on rcc structure , fire proof painting work on ms structure , misc for dowels tube and tape and wire loop , electrical work as specification , flame proof light , smoke detectors , fire proof central air conditioning system , lightening conductor , fire alarm system , fire fighting system , ms plate 10 mm for roofing layer , ms plate 15 mm for roofing layer , shredded rubber 150 mm crumb rubber tiles size 500 x 500 x 50 mm , pbs roll is 1322 to 62 weight min 3 kgs per sqm , 75mm dia pvc pipe

CTN :45280817

12 Jun, 2026 NA

Kinnaur - Himachal Pradesh

Tender For corrigendum : supply of excavation , pcc 1 is to 4 is to 8 , pcc 1 is to 3 is to 6 , rcc m40 side walls of entire building including retaining wall and parapet wall and side wall beside of the rolling shuttter , rcc m30 foundation and floor and roof slab and colume padestal , mild steel tmt bar for rcc work , ms tubes , shuttering plywood , anchor bolt 25mm dia , boulder soling , rolling shutter , main door , window , fire proof painting work on rcc structure , fire proof painting work on ms structure , misc for dowels tube and tape and wire loop , electrical work as specification , flame proof light , smoke detectors , fire proof central air conditioning system , lightening conductor , fire alarm system , fire fighting system

State Government

CTN :45445001

24 Jun, 2026 60.00 Lacs

Jummu - Jammu And Kashmir

Tender For installation of electro-mechanical equipment at cps muthi for water supply to durga nagar. - h.c pumping units-2no-providing, installation, testing and commissioning of 50000 gph x 150 mtrs. head (02 no.s) horizontal centrifugal split casing pump with slow peed motor at cps muthi by way of excavation of earth work for laying of rcc foundation block. the job includes construction of foundation block for installation of 50000 gph x 150 mtrs. hend horizontal centrifugal pump set at cps muthi. by way of dismantling of old foundation blocks with the help of required tool and tackle and manual labour as per site requirement. disposing off the excavated material from the site to distance of at least 0.50 km with the help of manual labour and mechanical transport. job includes digging of pit of size 6x3.5x4and disposal of excavated material from the site of the work to the place of dumping. providing/lying of rcc foundation block of size 5x3.5x5(labove the ground level) in 1:2:3 cement concrete mix having requisite reinforcement with 12 mm dia. tor steel from center to center with proper spacing. fabrication and fitting of foundation bolts duly welded with cross members and threading at top with nut. foundation bolt shall be welded with tor steel and firmly grouted in the cement concrete mix, plastering and finishing from outside: fitting of base frame plate on the top of the block and leveling it both horizontally as well as vertically. strengthening of the base frame by providing and welding of m. s. channel cross members of required size and as per the size of frame for giving extra strength against vibration of the unit and on full load running conditions. complete job includes cost of material and labour charges for laying of the foundation block, plastering and finishing. placing horizontal centrifugal pumping unit on the base frame by using hydra crane, chain block, manual labour and other tools and tackles. leveling of the pump and motor properly on the base frame and coupling them by fitting of the m.s. coupling bolts with nuts rubber bushes and m.s. fasteners required for horizontal centrifugal pumping unit base connections with base frame job includes cost of material, carriage of machinery and allied materials to the site of work, loading/unloading and allied charges.suction line: fabrication of suction line by providing / fabrication of ms pipe of dia 150 mm. of length as per site requirement (09 mtr approx.) proper beveling of ms pipe for v-butt welding joints. the job includes providing and. fabrication of ms bends of 150 mm dia out of ms pipe 150 mm dia. providing/fabrication / fitting of ms flanges-4no wherever required and with the one flange compatible to be fitted the suction flange of both the pumps. job includes providing and fabrication of ms bends of 150 mm dia -04 no. the job also includes providing and fitting of sluice valves of 150 mm dia. (cs material)- 02no.(01 no.for each suction line of 02 pump sets) on suction lines. providing, fabrication and fitting of ms flanges at both end of sluice valve as per site requirement.delivery line: fabrication of delivery line by providing and fabrication of ms pipe 125 mm. upto manifold. proper beveling of ms pipes for v-butt welding joint. job includes fabrication/fitting of ms pipe 125 mm dia. upto manifold. job also involves making interconnection with manifold with the delivery flange of newly installed pumps. the job involves fabrication/fitting of ms bends as per site requirement no-02 out of 125 mm dia. ms pipe. fabrication of 04 no. ms flange of 125 mm dia. to match delivery flange of the pump and welding of flange with one end of the bend. makes interconnection of manifold with delivery pipe. job also includes providing/fitting of sluice valve (cs)-2no and reflux valve of 125mm-2no (cs material) on delivery side of each pumpset by the way of welding for on delivery line. all the welding work shall have to executed butt pre heated high pressure welding electrod

Central Government/Public Sector

CTN :45458955

15 Jun, 2026 NA

Multi City - Uttar Pradesh

Tender For auction sale of depot ferrous scrap - scrap ferrous rolling items consisting of shuckle,pin, screw bolt, buffer spindle, rod, round, with or w/o foundation, tie bar, flat(plane/leaf spring)angle, plte(plane/chequered), grider, chanal,bar, equilizing & compensating beams, brake-equilizer, livers, pull rod, rod runs, draw bar-hook, crow bar, fish plate, shaft,spring leaf, fork of fork lift, rail tongue, rail tensor, beam-scale, link, spaner, coupling rod, m.s. sleeper & other various types of rolling items released from loco,carriage, sig, trd, tmc, electric of sorts & sizes with or w/o attechment if any. note- 1- loading by purchaser 2- cutting not allowed 3-delivery not allowed against part payment. location-lying in bin no. a-08 near line no.-10

corporations/Associations/Others

CTN :45445697

19 Jun, 2026 15.14 Lacs

Kaushambi - Uttar Pradesh

Tender For supply of materials and erection for shifting of control room pannel at 33/ 11 kv sub station bharsawa distt. kaushambi under deposit scheme on "semi turnkey basis" under edc, kaushambi - name of work: supply, carriage & erection of materials for control room pannel shifting of shiffting of 33/11 kv s/s bharsawa distt. kaushambi, supply of de-centralised materials, 11 kv 3x120 mm2 xlpe cable jointing kit o/d & i/d, control cable 4x2.5 mm2, control cable 2x2.5 mm2, g.i. pipe 6 " dia, rubber matting, clamp with nut & bosts, earth wire clamp for pcc pole, stay clamp for pcc pole, top channel clamp pcc pole, dropper channel clamp pcc pole, g.i. strip 35x6 mm, carriage of following material, pcc pole 8.5 mtr. long., structure of la, 33kv isolator, 33 kv cts, single t/f control pannel, 33kv vcb,11 kv outgoing. incoming pannel, battery & battery charger and other associated accessiories etc. (availibility at concern store center of store division), erection work, installation of 33 kv single transformer control pannel 2 no., incoming 2 no. and 7 no. outgoing in the switchgear room and grouting the pannel by rag bolt using cement, sand mortar in ratio 1:3. work includs fitting of all accessories in all respect with complete connection of control cable with pannel. all material will be provided by the contractor except vcb and crp., construction of cable trenchs with top cover and laying of control cable for vcb, c.t. & t/f control pannel etc. as per direction of engineer. trenchs to be 12 wide and 9 deep. work includes digging, of trench, concreting of the foundation in the ratio 1:3:6 r.b. wall 9 wide with cement mortar 1:4 and plastering inside the trench in the ratio 1:3 and sand filling in the trench. all material will be provided by the contractor., earthing of 11 kv indoor equipments, switchgears as per resspo drawing. with g.i. strip of size 35x6 mm. g.i. strip fully welded at both ends and to be connected with earthmat,, erection of dp with pcc pole 8.5 mtr long with all accessaries and grouting of the pcc pole with cement, sand and brick ballast ratio 1:4:8 size 0.45x 0.45x 1.5 mtr deep under the ground as per drawing no. res-6.(cement, sand, brick, ballast shall be provided by the contractor.), installation of 24 volt battery and battery charger with cabinet in the switch gear room, by grouting base channel 100 x 50 x 6 x 1000mm. fixing of rag bolt., laying of 11 kv 3x300/3x185/ 3x120 sqmm. xlpe cable by digging 0.75 mtr. deep trench, putting layer of sand in the bottom, ramming it, laying of cable over it rmt and covering the cable from sides and top by laying bricks, finally covering the same by earth and levelling of the same, all the materials, except cable, will be pvovided by the contractor., fixing and termination of outdoor/ indoor heat shrinkable cable boxes of size 3 x300/3x185/3x120 sqmm. xlpe cable. boxes will be supplied by the contractor, sundries ( as per site requirement/emergency work), safe dismantling of 11 kv o/g pannel & received back to store, laying of weasel conductor with the help of aluminium roller by hanging three nos. on each support in a manner taking sufficient care to ensure safety of weasel conductor against rubbing on ground, precaution for safety of crops is also to be taken. the work includes jointing of conductor by providing jointing sleaves, stringing of conductor upto correct sag and binding of conductor with insulators on each support. all material shall be provided by contractor such as jointing sleeve binding wire, armour rod etc.

CTN :45451265

19 Jun, 2026 NA

Budgam - Jammu And Kashmir

Tender For tender for supply of truss - the principle rafter and the bottom chord shall be fabricated out of rectangular steel hollow sections of size 96mm x 48 mmx 4.00 mm (8.22 kg/rm) , partition truss - the principle rafter and the bottom chord shall be fabricated out of rectangular steel hollow sections of size 96mm x 48 mmx 4.00 mm (8.22 kg/rm) , main column of rhs 122 x 61 x 3.6 mm 9.67 kgs per rm , side column for steel door of rhs 122 x 61 x 3.6 mm (9.67 kgs per rm) , 2.825m length each , runner front and back side length 3660mm , runner partition or gable end length 6100mm , runner front and back door sides length 2450mm , purlin of rectangular steel hollow sections of size 96mm x 48 mm x 4.0 mm (8.22 kg per rm) with 6mm thick , ms extension purlin shall be of 450mm long fabricated out of rectangular steel hollow sections , 1400 x 450mm for door. , ms sunshade with sheet 0.63mm thick 1400 x 450mm for door. , ms sunshade with sheet 0.63mm thick 1500 x 450mm for window , top runner shs 45x45x2.9 mm steel sections , ms sheet top and bottom u channel 3000mm length , false ceiling supporting angle ms 65x65x5 mm , for wall pre-painted gi both sides , tongue and groove , for ceiling- pre-painted gi both sides , tongue and groove , ppgi outer corner flashing 200x200x3050mm , door flashing of size 100x100x2700mm , door flashing of size 100x100x1500mm , window flashing of size 50x50x1100mm , ppgi ridge cover 450x450x3050mm , ppgi inner corner flashing 100x100x2700mm , (colour white) , ppgi inner corner ceiling flashing 50x50x3000mm (l shaped) , ppgi camouflage roof sheet 4000x1060mm x 0.63mm , ppgi camouflage wall cladding sheet 3050x1060mm x 0.63mm , ppgi camouflage for inner partition wall cladding sheet , polycarbonate roof sheet 4000mmx1060mm x 3 mm , ppgi camouflage for gable wall cladding sheet 3000x1060mm x 0.63mm , ms foundation bolt 16x450mm , ms nut and bolt 12 x 40 mm , ms nut and bolt 12 x 100 mm , ms nut and bolt 16 x 50 mm (connect of truss and purlins) , ms nut and bolt 10x75 and washer for fixing of sunshed , gi self tapping screw 75mm (for fixing panel with coln) , gi self tapping screw 25mm (for fixing of inner flasing) , gi self tapping screw 50mm (for fixing of roof sheet) , double shutter steel doors will be provided in each store shelter as shown in the drawing. , windows in each shelter will be provided. window size will be 1.20m x 1.20 m with two vertical panels , one insulated puf door shutter with aluminium frame of suitable size shall be provided complete with pressed steel or u-channel frame , one fixed glass window of size 2.00m wide x 1.20m high shall be provided complete with ms frame , necessary cleats , rubber beading and transparent glass of minimum 5mm thickness , padlock with 7 levers 50mm , with 3 nos spare key. , silicon sealant 280 ml , manufacturing sand (m- sand) confirming to is 383-2016 , crushed stone sand category. , stone aggregate to be crushed rock or gravel 20mm graded conforming to is 383-2016 , stone aggregate to be crushed rock or gravel 40mm graded conforming to is 383-2016 , common burnt clay building bricks sub class b modular size designation 75kgf per cm2 , best locally available with sharp corners , non skid ceramic tiles of size 400 x 400 x 7-8mm conforming to is 15622 2017 , glass dividing strips 40x4mm , prefabricated foundation reinforcement type f-2 made of 12 mm & 10 mm for steel as main bars and 8 mm dia deformed bars as in stirrups us as per drawings , steel form work -type -2 -steel form work material for columns of size 0.3 x 0.3 x 0.9m and columns footing of size 0.9 x 0.9 x 0.3 m ( type f-2) made out of 3mm thick ms sheet , lightning conductor confirming to is - 3043 - 2018 with all accessories , pvc ceiling rose 2 or 3 terminal. , led tube light fitting complete 4 feet long 18 watt tube rod and electronic ballast , xlpe insulated pvc seathed (heavy duty) armoured multi core cable 16 sqmm 2 core aluminum conductor for working voltage up to and including 1100 volt ,

CTN :45420683

13 Jun, 2026 NA

Tawang - Arunachal Pradesh

Tender For supply of galvatume aluminium zinc coating gi based corrugated steel sheet 0.80 mm thick an colour having a tensile strength 550 mpa of size 10 feet x3 feet make uniix jindal mectec or eqv brand , ppgi ridge sheet of 0.80mm thick of 90cm wide of make sail tata jindal incl treating galvanised surface , self taping steel screw half thread with rawl plug of 1 1 oblique 2 inch size isi marked 100 nos per pkt , hdpe sand bags og colour of size 0.75x0.375x0.15 , door size 3.0x2.10m double leaf ms sheet for door 2mm thick frame as specified , door size 1.80x2.10m double leaf ms sheet for door 2mm thick frame chowkat made of steel equal angle iron 55x55x6mm isi grade , ventilator with grill of size 600x400 mm ventilator loop hole frame for steel angle of size 35x35x5mm isigrade , gate size 3.0 mx 2.0m double leaf frame made of anlgeiron 75x 75x6mm isi grade with shutters made of reinforemnt tmt bar 12 mm dia flat iron for stiles , anti corrosive red oxide zinc chromate primer conforming to is 5-2004 make berger nerolac asian or equivalent , white lime , waterproofing compound make pidilite dr fixit fevicol or equivalent , cement based paint snowcem of make berger nerolac asian or equivalent , cement 43 grade opc packed in hdpe bag each 50 kg wt conform to is 8112-1989 make birla gold ambuja ultratech acc jk dalmia or equivalent , brick sub class b , three phase 1.2 hp monoblock pump 430 volt complete with and incl 3 mtr length required size flexible suction pipe , air termination single pointed aluminium rod 12 mm dia and 300 mm long , testing point terminal block make of gun metal phosphorus bronze size 75 x 75 x 25 mm drilled and screwed including 3 nos 8 mm dia 25 mm long hexagonal head screw , aluminium strips 25 x 3.0 mm , galvanized iron strip 32 x 6 mm , earthing plate 600 x 600 x 6 mm galvanised steel suitable for gi strip fittings, drilled with 2 nos holes for 6 mm dia near one side , charcoal , salt normal , ci earth pit cover of size 300 x 300 x 6 mm with angle iron of size 20x20mm 3 mm thick with ms frame. , nut bolt 6mm dia 30 mtr dia with check nut and washer , gi pipe 40mm dia mtr 2.5 mtr make jindal tata kalinga , insulating pvc block 75x75x30 mm with insulating clamp nut and bolt make presto polycab finolex , wall vertical non woven geotextile 500gsm as separation layer between wall pvc membrane with provision of pvc disk anchor faster , 2 mm thick pvc p water proofing membrane properties of 2 mm thick pvc p water proofing membrane thickness 2 , non woven geotextile 500gsm as protective layer of pvc waterproofing mebbrance with provision of high quality adhesive , floor horizontal non woven geotextile 500gsm as separation layer between foundation and pvc membrane , 2 mm thick pvc p water proofing membrane properties of 2 mm thick pvc-p water proofing membrane , non woven geotextile 500gsm as protective layer of pvc for pvc membrane , deck slab horizontal non woven geotextile 500gsm as seperation layer between deck slab and pvc membrance , 2 mm thick pvc p water proofing membrane properties of 2 mm thick pvc p water proofing membrane thickness 2 , non woven geotextile 500gsm as protective layer of pvc waterproofing mebbrance with provision of high quality adhesive for non woven geotextile 50gsm , high quality adhesive for termination of pvc water proofing membrane at doors ventilators , cement opc 43 grade packed in hdpe bag each 50 kg wt for retaining wall 40.00 mtr x 3.00 mtr height 8 mtr x 3 mtr x 5 nos 40 mtr , coarse sand free from vegetation confirming to is 650 1991 , coarse aggregate 40mm graded confirming to is 383 2016 //bid details 2 / 47 , stone boulder 9 inch to 12 inch , pvc pipe 75mm dia 3 mtr long

CTN :45433535

15 Jun, 2026 NA

Mughalsarai - Uttar Pradesh

Tender For supply of sitc 30 mtr high mast tower , supply of foundation bolt , sitc flp type feeder pillar , sitc of 500 w led floodlight luminaire , supply double dome aviation lamp , construction of earthing pit , 50 x 6 mm gi earth strip connections , illumination design and submit report