Latest lock nut washer Tenders | Government lock nut washer Tenders

Central Government/Public Sector

CTN :43041804

02 Jan, 2026 NA

Ghaziabad - Uttar Pradesh

Tender For corrigendum : supply of set of bolts with chain

State Government

CTN :43303801

31 Dec, 2025 2.75 Lacs

Rangat - Andaman And Nicobar Islands

Tender For a/r & m/o water supply under sd-iv, kadamtala of cd-i, apwd, rangat during 2025-26. sub work:- procurement of water supply fittings. - pig lead, rubber sheet 6mm thick, ms base plate 250x250x12mm, di pipe 100mm dia k9, ci flange tee 150x150mm dia, ci tee 150x150mm dia, tyton gasket 100mm dia, ci bend 150mm x 90 digree, ci sluice valve 100mm dia, ci sluice valve 150mm dia, ci tyton flange collar 100mm dia, ci flange tail piece 100mm dia, ci non return valve 100mm dia, ci flange bend 100mm x 90 digree, ci gasket collar 150mm dia, ms nut & bolts 2", ms nut & bolts 2 ", ms nut & bolts 3", ms nut & bolts 4", precoated galvanized iron profile roofing sheet (10 feet)

State Government

CTN :43284983

29 Dec, 2025 1.85 Crore

Bengaluru - Karnataka

Tender For suppliers/manufacturers/dealers/contractors for the rated supply and installation of equipment on civil, mechanical, electrical, for the preparation of estimates in ramanagara channapatna hi-tech cocoon market phase-1 in channapatna taluk. - supply and fixing of main lt street light control panel out door type with all accessories.all this electronic circuits componets are assembled in m.s.16 gauge suitable panel cabinet with glass fraonted and locking arrangements including cost of all mateials etc. complete including cost of materials labour usage charges of machinery complete as per specificationscomplete with all lead and lift, loading and unloading charges as per specification and as directed by the e.i.c. of the work., supply and fixing of main lt high mast controle panel out door type with all accessories all this electronic circuits componets are assembled in m.s.16 gauge suitable panel cabinet with glass fraonted and locking arrangements including cost of all mateials etc. complete including cost of materials labour usage charges of machinery complete as per specificationscomplete with all lead and lift, loading and unloading charges as per specification and as directed by the e.i.c. of the work., supply and fixing of powder coated aluminum expansion joint profile sheet for wall 20mm gap size 1.5mm thick x 120mm width complete with all lead and lift, loading and unloading charges as per specifications and as directed by e.i.c of the work, supply and delivery of centrifugal pumpset at site brand new best make and with discharge and duty conforming to isi standards and its latest amendments. capacity 10cumhr at 55 mtr head , supply and delivery of centrifugal pumpset at site brand new best make and with discharge and duty conforming to isi standards and its latest amendments. capacity 10cumhr at 35 mtr head , electrical control panel with all accessories to run the system including incoming mccb individual motor controls with mpcb,indicators, level controls in suction and delivery tanks and suitable provision for automatic water level controller etc. including wiring and earthing etc., complete to make the operation automatic. complete with all lead and lift, loading and unloading charges as per specification and as directed by the e.i.c. of the work. , supplying, fixing testing and commissioning inter unit .sh 80 piping with necessary flanges, bolts, nuts, neoprene gaskets, welding wherever necessary, with necessary control valves, non return valves etc. and with one coat of primer and two coats of approved enamel paint with is recommended color etc., complete to make the operation automatic. complete with all lead and lift, loading and unloading charges as per specification and as directed by the e.i.c. of the work. , supplying fixing testing and commissioning approved make electronic dosing system for dosing chlorine into the treated water with pre set dosage based on the quantity of water. , supplying fixing testing and commissioning approved make water softener with necessary accessories complete with frontal piping valves suitable supports for mounting pressure gauges orifice plates. , supplying fixing testing and commissioning approved make activated carbon filter in ms vessel construction with internals electrical control system complete with frontal piping valves suitable supports for mounting pressure gauge orifice plate etc., supplying fixing testing and commissioning approved make pressure sand filter with necessary accessories complete for auto back wash along with multiport valve suitable supports for mounting pressure gauges orifice plates. the filter shall be made of frp with necessary protective coating. the cost of filter shall also include initial charge of under bed and multi grade filter media to suit the requirement etc., supplying and fixing of treated water pumps duty condition discharge capacity 10 cum. hr. total delivery head 30m no of pumps 1 no. standby pumps 1 nomake kirloskar grundfospump ,

corporations/Associations/Others

CTN :43287647

05 Jan, 2026 NA

Tuticorin - Tamil Nadu

Tender For ttps operation circle mpm i unit i complete dismantling of mill 1f and reassembling the dismantled spares in mill 1b - draining of mill gearbox oil completely, cleaning the gearbox internals like worm shafts and worms wheel. after inspection filling the gearbox with new/old oil including devolution of old oil to stores etc, (department vehicle will be provided for drawl of oil at free of cost)., charges for dismantling the gear coupling bolts, gear coupling (worm shaft only), distance piece, unscrewing the worm shaft extension cover bolts and bearing housing cover bolts, removing the worm shaft extension cover, lowering to ground floor, releasing the worm shaft assembly from its position and assemblies providing back the overhauled worm shaft assembly in the gear box and fitting back the worm shaft extension cover, bolting and tightening the bolts to the required torque level and assembling back the gear coupling bolts, distance piece etc., charges for dismantling the worn out rubber element in the mill motor coupling, cleaning inspection and replacement of new rubber element and checking the tightness of coupling including cost of consumables etc.,, charges for dismantling the spool pieces, multiple port outlet bodies and transition pipes 4 nos. each after assembling the coal pipe inspection with center feed pipe structures., charges for removal of orifice 1 no. after dismantling the victaulic coupling., charges for removal of mill journal doors including lead, lift and transporting of materials fromstores and devolution of scraps from site to stores and cost of consumables such as welding electrodes, gas, cotton waste etc.,, charges for removal of journal with trunnion assembly in the mills including lead, lift and transporting of materials from mill repair bay to mill floor and back, devolution of scrap to stores and cost of consumables such as welding rod, cutting gas, cotton waste etc., charges for changing of bowl extension ring (6 nos) per mill including lead, lift and transporting of materials from stores to mill floor and back, charges for dismantling of lube oil cooler, from lube oil system, cleaning, flushing the cooler, oil pipe lines, water pipe lines, oil separator tank, checking of water lines, valves and nipples., charges for providing wedges between lower skirt and mill insulation cover plate firmly, removal of gearbox bottom cover flange bolts, lowering the thrust bearing and pump housing after supporting lower radial bearing housing. lowering the thrust bearings and reassembling of all the above parts, charges for lifting the vertical shaft along with worm gear and worm wheel from top of the gear box and place it in stand. dismantling the worm wheel hub lock nut and removal of worm wheel from the worm hub by steam/induction heating. inspection of upper redial bearing and renewal if necessary., charges for dismantling and removing worn out thrust bearing of mill vertical shaft by gas heating the racer, cleaning the bearing seating area in the vertical shaft., charges for removing the thrust bearing adopter (worn out) and assembling the new adopter by heating, charges for removal of seperator body along with classifier assembly. inner cone mill outlet plate and venturi dismantling the air inlet housing after segregating from hot air duct placing in appropriate place. dismantling the bowl with bowl hub and separating the bowl hub from bowl and in filling the same., charges for dismantling of upper skirt assembly, lower skirt assembly, mechanical face seal assembly, dust guard and blue matching of seal runner, renewal of seal( bronze), air seal, dismantling of mill bottom cover, upper bearing housing cover, oil seals etc.,, charges for dismantling the triangular liners, cutting the bulged mill bottom plate, applying refractory cement at the mill bottom plate 1 set by providing bolts and welding., charges for dismantling the radial bearing after removing the oil pump hub and oil pump bushing., charges for changin

corporations/Associations/Others

CTN :43287648

05 Jan, 2026 NA

Tuticorin - Tamil Nadu

Tender For ttps operation circle mpm i unit i complete dismantling of mill 2f and reassembling the dismantled spares in mill 1c - draining of mill gearbox oil completely, cleaning the gearbox internals like worm shafts and worms wheel. after inspection filling the gearbox with new/old oil including devolution of old oil to stores etc, (department vehicle will be provided for drawl of oil at free of cost)., charges for dismantling the gear coupling bolts, gear coupling (worm shaft only), distance piece, unscrewing the worm shaft extension cover bolts and bearing housing cover bolts, removing the worm shaft extension cover, lowering to ground floor, releasing the worm shaft assembly from its position and assemblies providing back the overhauled worm shaft assembly in the gear box and fitting back the worm shaft extension cover, bolting and tightening the bolts to the required torque level and assembling back the gear coupling bolts, distance piece etc., charges for dismantling the worn out rubber element in the mill motor coupling, cleaning inspection and replacement of new rubber element and checking the tightness of coupling including cost of consumables etc.,, charges for dismantling the spool pieces, multiple port outlet bodies and transition pipes 4 nos. each after assembling the coal pipe inspection with center feed pipe structures., charges for removal of orifice 1 no. after dismantling the victaulic coupling., charges for removal of mill journal doors including lead, lift and transporting of materials fromstores and devolution of scraps from site to stores and cost of consumables such as welding electrodes, gas, cotton waste etc.,, charges for removal of journal with trunnion assembly in the mills including lead, lift and transporting of materials from mill repair bay to mill floor and back, devolution of scrap to stores and cost of consumables such as welding rod, cutting gas, cotton waste etc., charges for changing of bowl extension ring (6 nos) per mill including lead, lift and transporting of materials from stores to mill floor and back, charges for dismantling of lube oil cooler, from lube oil system, cleaning, flushing the cooler, oil pipe lines, water pipe lines, oil separator tank, checking of water lines, valves and nipples., charges for providing wedges between lower skirt and mill insulation cover plate firmly, removal of gearbox bottom cover flange bolts, lowering the thrust bearing and pump housing after supporting lower radial bearing housing. lowering the thrust bearings and reassembling of all the above parts, charges for lifting the vertical shaft along with worm gear and worm wheel from top of the gear box and place it in stand. dismantling the worm wheel hub lock nut and removal of worm wheel from the worm hub by steam/induction heating. inspection of upper redial bearing and renewal if necessary., charges for dismantling and removing worn out thrust bearing of mill vertical shaft by gas heating the racer, cleaning the bearing seating area in the vertical shaft., charges for removing the thrust bearing adopter (worn out) and assembling the new adopter by heating, charges for removal of seperator body along with classifier assembly. inner cone mill outlet plate and venturi dismantling the air inlet housing after segregating from hot air duct placing in appropriate place. dismantling the bowl with bowl hub and separating the bowl hub from bowl and in filling the same., charges for dismantling of upper skirt assembly, lower skirt assembly, mechanical face seal assembly, dust guard and blue matching of seal runner, renewal of seal( bronze), air seal, dismantling of mill bottom cover, upper bearing housing cover, oil seals etc.,, charges for dismantling the triangular liners, cutting the bulged mill bottom plate, applying refractory cement at the mill bottom plate 1 set by providing bolts and welding., charges for dismantling the radial bearing after removing the oil pump hub and oil pump bushing., charges for changin

Central Government/Public Sector

CTN :43297957

09 Jan, 2026 98.32 Lacs

Anuppur - Madhya Pradesh

Tender For supporting of roof by mechanised drilling of long hole with resin capsule, fitting of bearing plates, w-strap and tightening of nuts and testing of installed roof bolts in mk seam development panel and uk bottom seam dep. p1 panel in bhadra 7/8.

Central Government / Public Sector

CTN :43195674

31 Dec, 2025 NA

Nanded - Maharashtra

Tender For corrigendum : supply ,installation &commissioning valve regulated lead acid stationary battery of 48v/200ah duly charged confirming to irs specification no.irs:s:93/96a with latest amendment.. the battery bank shall be supplied with stackable single cell of 2 volt-200ah and shall housed in metal tray to facilitate the required battery bank of 48volt i.e. each cell consist of 24 nos of stackable single of 2v-200ah along with necessary cell consisting links , nuts ,bolts,float insulation etc.make amraraja, hbl, exide, microtex or similar.

Central Government / Public Sector

CTN :43332605

31 Dec, 2025 NA

Nanded - Maharashtra

Tender For supply ,installation &commissioning at locations mentioned in attachment of valve regulated lead acid stationary battery of 48v/200ah duly charged confirming to irs specification no.irs:s:93/96a with latest amendment.the battery bank shall be supplied with stackable single cell of 2 volt-200ah and shall housed in metal tray to facilitate the required battery bank of 48volt i.e. each cell consist of 24 nos of stackable single of 2v-200ah along with necessary cell consisting links , nuts ,bolts,float insulation etc.make amraraja, hbl, exide, microtex or similar.

corporations/Associations/Others

CTN :43065191

30 Dec, 2025 NA

Sonbhadra - Uttar Pradesh

Tender For corrigendum : supply of ms plain washer 12 mm, ms plain washer 10 mm, ms plain washer -20mm, ms plain washer -24mm, ms plain washer 36mm, ms plain washer m 30, ht spring washer m-16mm, spring washer m-30mm, spring washer 33mm, spring washer 36mm, lock washer od-55mm,id-24mm & thick-5mm with inside teflon sealed (as per sample), lock washer od-68mm,id-30mm & thick-5mm with inside teflon sealed (as per sample), lock washer od-75mm,id-33mm & thick-5mm with inside teflon sealed (as per sample), spring washer 24mm, ht stud with doble nut & washer 16x220, ht allen head csk bolt & nut 6 x 30 mm, ht hex head bolt with nut of size - 16x100mm² (half thread), ht hex.bolt m-10x50, ht spring washer m-16mm, ht nut & bolt with washer 12 x 65 mm, ht bolt wt nut (f/t) gr 8.8 m12x50mm, ht nut, bolt with simple washer 24x80mm, ht stud with double nut m20x110, ms bolt with nut size 20 x 220 mm (hexa head) ft, ms washer 20 mm, ms washer 24 mm, ms bolt with nut size 18 x 250 mm (hexa head) ft, ms bolt with nut size 24 x 200 mm (hexa head) ht, ms bolt with nut 12x65 mm, ms bolt with nut, size:m24x75, ms bolt with nut 20x80 mm, ms hex head bolt with nut,size- m12x40 (f/t), ms hex head bolt with nut,size-m12x50 (f/t), ms hex head nut & bolt m 16x80, ms plain washer m-1, ms plain washer od-40, id-16, washer od-55mm, id-14mm thickness-6mm, moc-ms, ss square head bolt with nut 20x80mm, ms bolt with nut m 16x65 mm f/, hexagonal ms bolt with nut & washer m 16x100 mm, ht hex head bolts with nut and plain washer m10x40 grade a 12.9, ht nut, bolt with simple washer 16x80mm, ht bolt with nut 16x65 mm, ss hex head bolt with nut,sizem20x130 (1/2t), ss stud 16x80mm, ht bolt with nut & washer, size:m16x100 grade 9.8, ht bolt with nut 12x65 mm grade 9.8, ht hex nut bolt half threaded with 01 no., spring & 01 no. plain washer of size 24 x 120, ht nut & bolt 2no. plainwasher 8x25 mm grade 9.8, ht bolt & nut m20x80 mm grade 9.8, ht nut and bolt with two number plain washer, 16x50 mm grade 9.8, ht hex nut bolt half threaded with 01 no., spring & 01 no. plain washer of size 20 x 150, ht hex bolt with nut & washer, m 24x100 mm, grade 9.8, ms hex head bolt with nut, size-m 10x25 (f/t), ht stud with double nut m-22x140 grade 9.8, ht hex bolt and nut m 20x100 h/t grade 9.8, ht stud with double nut m16x80mm full, threaded in inch grade 9.8, ss bolt with nut & washer 16x65 mm grade 9.8, thread in inch, ss bolt with nut & 2 no flat washer and 1 no spring, washer having micro thread and micro pitch with, following size.12x80 mm grade 9.8, ss bolt with nut & washer, size-10x60mm grade, 9.8, ht stud with double nut 24x100 mm grade 9.8, ms bolt with nut 20x80 mm grade 9.8, ms bolt with nut 20x100 mm, allen head counter shunk scew 12x50 mm grade, 9.8, ms bolt & nut dia-22x120 mm grade 9.8, hexagonal ms bolt with nut & washer m, 16x100 mm grade 9., ms bolt with nut 16x50 mm full threaded, ht hex.bolt m-10x50 grade 9.8, ss hex bolt & nut m-12x50 grade 9.8, ht hex bolt with nut full thread m16x40, thread in inch grade 9.8, hthh bolt f/t nut washer m20x65 grade 9.8, ht nut and bolt with washer size 10x60, grade 9.8, ht hex bolt with nut full thread m16x40, grade 9.8, ht hex bolt with nut full thread m16x50, grade 9.8, ht bolt with nut 16x65 mm grade 9.8, ht stud full threaded with nut & washer m 24x60,, m grade 9.8, ht nut & bolt with washer 12 x 65 mm grade 9.8, ht allen head csk bolt & nut 6 x 30 mm grade 9.8, ht spring washer m-16mm, ms plain washer is:2016, m20, ms washer 20 mm, ms washer 24 mm, csk bolt & nut with plane washer 16x40, h.t. hex head bolt with nut of size -m 16x100 mm, (f/t), ht hex head nut, bolt with simple washer size, 16x80mm (f/t), ht stud with double nut m16x80mm full, threaded, h.t. hex bolt m - 16x65(f/t), h.t. hex head bolt with nut of size - 16x120mm², ht hex nut & bolt m 12x40 ft, ms nut & bolt, size:m20x120, m.s. bolt & nut of size - 5/8"x11" mm, ms

State Government

CTN :43313000

09 Jan, 2026 2.44 Lacs

Multi City - Karnataka

Tender For supply of various sizes / types and grades ms bolts and nuts, screws, washers etc., required for sharavathy valley project power houses, kpcl, jogfalls - 577 435

Lock Nut Washer Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors