Latest lock rod Tenders | Government lock rod Tenders

Central Government/Public Sector

CTN :45486643

26 Jun, 2026 NA

Mumbai - Maharashtra

Tender For lock rod near end for cgl/irs 52 kgs. one piece rodding with solid jaw drg.no.s&t/by/f-341/a , material should be as per drg. with m.s square head pin as per drg no- s&t/by/f-353. material should confirm irs s5 & s10. party to submit oem / authorization with warranty. sample to be got approved before bulk supply ( for dimension purpose only).(shop no.03) [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :43959838

10 Jun, 2026 NA

Nashik - Maharashtra

Tender For bid to ras corrigendum : tender for supply of osaero job work for manufacturing of 86 parts ref semfg852 c c -bush , rod , packing , plug , rod , dowel , bush , pipe , cup , bush , bush , bush , bush , bush , ring , pipe , bracket , bracket , bracket , terminal , terminal , terminal , terminal , nut , bell crank , bell crank , bell crank , eye end , nipple , rod , plug , flange , nut , flange , flange , brush , body , washer , washer , rod , flange , flange , flange , bush , flange , flange , flange , flange , flange , flange , flange , flange , nipple , flange , lever , flange , flange , angle , nut , bush , bush , guide (throttle assly) , locator , guide , rod , slide , carrier , flange , flange , flange , flange , nipple , push rod , body , end tip , nut , sleeve , coupling , stopper , nipple , nipple , ring , nipple , body , washer , shaft

Central Government/Public Sector

CTN :43911685

09 Jun, 2026 NA

Nashik - Maharashtra

Tender For bid to ras corrigendum : tender for supply of osaero job work for manufacturing of 27 parts ref semfg887 : : -fitting , stopper , stopper , stopper , dowel , bell cranck , fork , bracket , bracket , terminal , key , casing , rod , rod , terminal , adjustable end piece , end piece , panel , lug , eye end , body , tee-piece , tee piece , body , bracket , body , fork

CTN :45349631

09 Jun, 2026 NA

Parganas - West Bengal

Tender For corrigendum : supply of seal tripple lip , mounting rubber , disc , nut , seal oil , lock , rod end , rear bearing cap oil , bolt , cutting gauge nut bolt , clutch disc assembly , starter motor assembly , dozer seal kit , 10 amp fuse , cap fuel tank , hose top left hand to right hand hydraulic , hose with clamp adopter 27mm , radiator hose pipe , steering oil filter

Central Government/Public Sector

CTN :45431584

09 Jun, 2026 NA

Multi City - Gujarat

Tender For auction sale of depot ferrous scrap - 98050114 scrap release all types of railway ferrous material consisting of s&t, p way, works and ohe items c & w items- such as ms, gi, ci containing signalling units, rods, junction boxes, panels, ms gi structures, ladders, mast, rtu, cb, etc. and all other types of signaling items, gear case, the ground connection, ohe fitting, ms chains, heavy structure almirah/racks, rods angle, top housing, road bar, glude joint, ground connection channel, pipes, lc material, ladders, jali, spring plank, pantograph with or without pneumatic motor, gate, door, brake cylinder, tie bar, fencing, trolley, ms machines etc., tmt bars rods, pulley, rib cage, point machines without motors, wagon body cut piece bogies side frame, machines, sleeper, ms sheet, various types sleeper part, tie bar, fencing bars, i-beam, damaged empty drums, light fittings, rail & rail pieces, ms wires, junk light weight/corroded material consist of toughened sheets, m.s./gi sheets, grease seal, drum, wire, parts of rolling shutter, light weight cuttings, various damaged and rusty drums filled with coalter, dry paint, mud and dray fo if any of sort and sizes, g.i. buckets, steel buckets baskets, signal lamps, duct, vent pcs., fencing and pipes, wire mesh, stretcher, bicycle, pan, frames, electrical fittings, t.l. fittings, grill- jali, cabinet frames, rack ballast, rusted body and parts of weighing machine, electronic/electrical material, small rods angle, battery boxes, tool boxes, shovel, rail door handles, main door, foot plate, step plates, bench pipes, typewriter g.i. pipes, trolleys, water tank bond, location box with or without their component and wiring fittings, trolly, different type of ohe bonds of rail and other various ms fabricated structures, break load rings, pins, screw, bolts, spikes, keys, loco parts, stay rods, sleeve for centre pivot, pantograph parts, palm pull rods, lever, axle box housings, air motor, springs of pantograph, connecting rods, and other rods, rear cover of axle box housing, longer hanger, spare parts of spt machine, pipe fittings, end shield covers, break beam hangers, brake shoe, vertical lever, suspension levers, compressor spares, tension rods bushes, dash pots, ms& wi turning borings cut, collars, vehicle spares, ci items consisting of rusty and dusty drainage pipe, valve, meter, brake block, pulley, motors body, pipes, plates, d.v, vacuum cylinder chamber, pig irons pieces, signaling box ohe fittings, steel furniture consisting of chairs, tables, g.i. separation sheet, chair , stretcher, beds, ms rack, almira, other types of steel furniture of sorts and sizes, broken, damaged with or without wood, cushions, plastic, mica, foam seat attachment, parts brake liner, thrust bearing, spring, yoke, insulation block hangers, slides, locking rods, parts of point machine, a b cover, break head, cylinder head, pcs. of break beam, protective tubes, and other p-way fittings, coupler, knuckles, cp top/bottom, pu pad, narrow/wide jaw adapter, released bulk head components, wagon doors, cutting plate, and assorted cut pieces thereof, fabricated from irsm 44, etc. brake cylinder, cs & ci if any. valve, broken pcs. of bearings, inner and outer race of bearings, spares of break valve, trolley wheels, clamps, bmbc parts, pump shafts, impellers, tension device parts, fan armatures, chain sling, rev. center, hooks, spares of trucks, accessories of transformer, fish plates, hooks, silent blocks, cut pieces of plates, doors, angles, etc., all plastic items, rubber and wooden , fasteners such as bolts, nuts, and other related misc, etc., with or without, rail, of sorts and sizes with or without parts fittings and minor non-ferrous attachments, unserviceable. excluding items - railway track. remarks:the quantity estimation is based on visual observation and is indicative only. the lot has been prepared to clear the land before handing over the scrap yard for memu work. 2. loading will be allowed

State Government

CTN :45397974

11 Jun, 2026 80.77 Lacs

Kota - Rajasthan

Tender For work of name :- remaining work pkg. no. rj-23-10/srf (rr) / np / 2022-23 distt kota - providing, laying and spreading and compacting specified graded crushed stone in sub-base course including premixing the material at omc in mechanical mixer (pug mill), carriage of mixed material, laying in uniform layers with motor grader, f.e. loader, on a prepared surface and compacting with vibratory compactor to achieve the desired density including all material, labour, machinery, lighting barricading and maintenance of driversion complete. (morth specification clause 401). with all lead & lift, fdkuiqjk rfd;k ls punzsly, total, kilometre stone reinforced cement concrete m15grade kilometre stone of standard design as per irc:8-1980, fixing in position including painting and printing etc ordinary kilometer stone (precast), fdkuiqjk rfd;k ls punzsly, e.mkuk ls guksfr;k, total, kilometre stone reinforced cement concrete m15grade kilometre stone of standard design as per irc:8-1980, fixing in position including painting and printing etc hectometer stone (precast), fdkuiqjk rfd;k ls punzsly, e.mkuk ls guksfr;k, total, providing and erecting typical citizens information board as per approved drawing & specification of mord, made of two ms sheet of 1.6 mm thick each of size 900 mm 750 mm stiffened by angle iron 25 mm 25 mm 3 mm all around the plate and plates fixed on frame of 75 mm dia pipe of 12 swg sheet (vertical post 3050 m with angle holdfasts and horizontal member 900 mm) to be joined by 5 mm thick ms plate at 12 places (65 50 mm) duly embedded in cement concrete m-15 grade of block of 600 mm 600 mm 750 mm size below ground level as per enclosed drawings & as directed by engineering - in-charge. all ms will be stove enameled on both side, lettering, figuring and border will be with ready mixed synthetic enamel paint of superior quality in required shade and colour etc. complete in all respect. all sections of framed post and steel tube will be painted with primer and two coat of epoxy paint as per drawing and as per mord specification., fdkuiqjk rfd;k ls punzsly, e.mkuk ls guksfr;k, total, providing and laying reinforced cement concrete pipes np-3 for culverts including jointing ends and fixing collar with cement mortar 1:2. (morth specification : clause 1000/2900). 300 mm dia, fdkuiqjk rfd;k ls punzsly, e.mkuk ls guksfr;k, total, dry lean cement concrete sub - base. construction of dry lean cement concrete 1:3:6 sub-base over a prepared sub-grade with coarse and fine aggregate conforming to is: 383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blening to be as per table 600-1, cement content not to be less than 200 kg/cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 mpa at 7 days, mixed in a batching plant, transported to site, laid with a paver with electronic sensor, compacting with 8-10 tonne vibratory roller, finishing and curing., fdkuiqjk rfd;k ls punzsly, total, providing and laying un-reinforced, dowel jointed, plain cement concrete pavement over a prepared sub-base with 43 grade cement, coarse and fine aggregate conforming to is:383, maximum size of coarse aggregate not exceeding 25mm, mixed in a batching and mixing plant as per approved mix design, transported to site, laid with a fixed form or fix form paver, spread, compacted and finished in a continuous operation including provision of contraction, expansion, construction and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, dowel bar, tie rod, admixtures and vacuum processing pump as approved, curing compound, finishing to lines and grades as per drawing as per morth specification : clause no. 602, 112. using cement concrete m-30 pavement grade, fdkuiqjk rfd;k ls punzsly, total, earthwork in excavation for foundation of structure complete with all lift, dewaterin

corporations/Associations/Others

CTN :45386583

05 Jun, 2026 3.60 Lacs

Villupuram - Tamil Nadu

Tender For supply and delivery of kitchen equipments for amma unavagam in villupuram municipality - supply and delivery of steam boiler with stand & burner water capacity 250 liters, operated by both lpg and fire wood, outer shells 8mm ms plate, inner shells 14 g (2.5mm thickness) 304 grade ss with 10 g (3mm thickness) 304 grade ss sheet, automatic float valve assembly, safety valve, pressure gauge meter, water level indicator, drainage valve, flame sensor, rubber gasket for inner vessel lid, ms stand 45x45x6mm angle, high pressure burner, ncv with fittings for lpg and chimney 10 feet.(to generate steam), steam generator (m.s outer :28 dia x 45 h, s.s inner 17 dia x 35 h), m.s.fire bar stand, 6 " dia ms smoke pipe (3feet), supply and delivery of rice vessel 25 kgs capacity, operated on steam made out of 14 g (2.5mm thickness) 304 ss sheet, lid and tilting handle, side support u clamp, unloadable by tilting the handle, mounted on a type tubular ss stand 6mm thickness, ss flat with lick rod.(rice cooking & mu ltipurpose vessel), supply and delivery of dhal vessel 25 kgs capacity, double jacketed, made out of 14 g (2.5mm thickness) 304 grade ss sheet with lid, tilting handle, side support u clamp safety valve, steam trap, unloadable by tilting handle, mounted in a type tubular ss stand 6mm thickness ss pipe, ss flat with lock rod.( size 16" dia x 16 h , 50 ltrs to make dhal without mixing steam in dhal), supply and delivery of single burner cooking range size : 24 l x 24 b x 18 h, top : 304 grade 16 g ss sheet, frame : 32x32x6mm ms angle, covering : 20 gauge ss 304 grade sheet four sides, pan support : 1 no cast iron grid, burner : 1 no, t 35 high pressure burner lpg with fittings, ncv : 1 no, legs : 1 16 g ss 304 grade pipe legs with adjustable nylon bullet legs.(for cooking purpose), supply and delivery of double burner cooking range size : 48 x27 x16 , top : 304 grade 16 g ss sheet, frame : 32x32x6mm ms angle, covering : 20 gauge ss 304 grade sheet four side, pan support : 2 nos cast iron grid, burner : 2 nos, t 35 high pressure burner lpg with fittings, ncv : 2 nos, legs : 1 16 g ss 304 grade pipe legs with adjustable nylon bullet legs., supply and delivery of idly cooking unit, ss vessels, plastic materials, mixie, tilting grinder, pulvariser grinder and other equipments, ss rice karandi, big size, ss sambar karandi, big size, ss water drum 50 litres capacity, ss water jug, ss plates, round plain, ss tumblers, with curved edges, 300 ml capacity, mobbu, plastic tray, plastic pot, plastic mug, plastic drum, 50 litres, plastic container (10 litres, plastic muram, plastic stool medium, cloth mat, hot box, mixer heavy duty 1 hp, 3 jar, tilting grinder 15 litres capacity, wall clock, supply and delivery and fixing of r.o plant isi make, with control panel, sand filter vessel, carbon filter vessel, 10 micron filter, 4 membrane, 4 membrane housing, 10 filter housing, 2 pressure gauge, booster pump (cri), 2 vessel valve, pebbles as required, gst. 18% (cgst-9%, sgst-9%)

CTN :45331009

05 Jun, 2026 NA

Kanchipuram - Tamil Nadu

Tender For supply of gun metal gate valves with locking rod and position indicator flanged end 20 mm , gun metal gate valves with locking rod and position indicator flanged end 25 mm , gun metal gate valves with locking rod and position indicator flanged end 50 mm , gun metal gate valves with locking rod and position indicator flanged end 80 mm , gun metal gate valves with locking rod and position indicator flanged end 100 mm

CTN :45329078

09 Jun, 2026 6.09 Lacs

Jaipur - Rajasthan

Tender For work no 9 - construction of embankment with approved material obtained from borrow pit with all lifts and leads, transporting to site, spreading, grading to required slope and compacting by vibratory roller 8-10 tonne to meet requirement of table 300-2 including cost of compensation for earth taken from private land complete as per mort&h specification clause 305. (lead taken upto 5 km), providing and laying lean cement concrete 1:4:8 in sub- base over a prepared sub-grade with coarse and fine aggregate conforming to is: 383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be as per table 600-1, cement content not to be less than 150 kg/ cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 mpa at 7 days, mixed in concrete mixer, laid manually, compacted with surface vibrator, finishing and curing complete as per clause 601, 112 of mort&h specification including all material, labour, machinery, lighting, guarding and maintenance of diversion., providing and laying un-reinforced, dowel jointed, plain cement concrete mix with concrete mixer & vibrator pavement over a prepared sub base with 43 grade cement , coarse and fine aggregate conforming to is: 383, maximum size of coarse aggregate not exceeding 25 mm, mixed as per approved mix design, laid, spread, compacted and finished in a continuous operation including provision of contraction, expansion, construction and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, admixtures (if required) as approved, curing compound, finishing to lines and grades complete as per drawing and as per clause 602, 112 of mort&h specification including all material, labour, machinery, lighting, guarding and maintenance of diversion. pcc m-20

Central Government/Public Sector

CTN :45282516

08 Jun, 2026 NA

Mumbai - Maharashtra

Tender For lock rod short for tws one piece rodding with solid jaw as per drg. no.tws-04. alt-1 material class ii is 2004 : 1991. material should be as per drg. with m.s. square head pin as per drg. no. s&t/by/f-353a. material test certificate required from nabl accredited lab. along with manufacturer's test certificate. party to submit oem/ autherization with warranty. sample to be get approved before bulk supply.(shop no.03) [ warranty period: 30 months after the date of delivery ] ]

Lock Rod Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

State Government

corporations/Associations/Others

Central Government/Public Sector