Latest lock stopper Tenders | Government lock stopper Tenders

CTN :43096271

19 Dec, 2025 NA

Delhi - Delhi

Tender For corrigendum : supply of tower bolts (non-ferrous metals) v2 as per is 204 (q2) , sinks (q3) , wire mesh fabric or cloth (v2) as per is 1568 (q3) , metal alloy casting water tap with aerator (v2) (q3) , flushing cistern (q3) , hydraulically regulated door closers (q3) , towel rail / ring / rack / hooks for bathroom (q3) , cast copper alloy screw down bib taps and stop valves for water services as per is 781 (q3) , toilet seat covers (v2) (q4) , towel rail / ring for bathroom (q3) , ptmt tap fitting (q3) , connection pipe with nuts (v2) (q3) , waste fittings for washbasin and sinks as per is 2963 (q3) , waste pipe (q3) , lock stoppers as per is 1223 (q3) , stainless steel butt hinges as per is 12817 (q3) , plastics bib taps pillar taps angle valves and stop valves as per is 9763:2000 (latest) (q3) , floor drain traps (q3) , steel butt hinges as per is 1341 (q3) , curtain pipe, sider and mounting bracket (q4) , varnishes or shellac varnish as per is 347 (q3)

CTN :43022586

18 Dec, 2025 NA

Darjeeling - West Bengal

Tender For corrigendum : supply of sinks (q3) , thinner for epoxy paints (bhel) (q3) , unplasticized pvc pipes for potable water supplies as per is 4985 (q3) , varnishes or shellac varnish as per is 347 (q3) , wire mesh fabric or cloth (v2) as per is 1568 (q3) , lock stoppers as per is 1223 (q3) , hasps and staples as per is 363 (q3) , floor drain traps (q3) , hydraulically regulated door closers (q3)

CTN :43171624

20 Dec, 2025 NA

Bangalore - Karnataka

Tender For supply of cast copper alloy screw down bib taps and stop valves for water services as per is 781 (q3) , sinks (q3) , flushing cistern (q3) , metal alloy casting water tap with aerator (v2) (q3) , hydraulically regulated door closers (q3) , towel rail / ring / rack / hooks for bathroom (q3) , connection pipe with nuts (v2) (q3) , plastics bib taps pillar taps angle valves and stop valves as per is 9763:2000 (latest) (q3) , sinks / wash basins - vitreous china as per is 2556 (part 4) (q3) , toilet seat covers (v2) (q4) , floor drain traps (q3) , waste fittings for washbasin and sinks as per is 2963 (q3) , waste pipe (q3) , lock stoppers as per is 1223 (q3) , urinal bowls as per is 2556 (part 6) (q3) , steel butt hinges as per is 1341 (q3) , tower bolts (ferrous metals) as per is 204 (q3) , continuous (piano) hinges as per is 3818 (q4) , curtain pipe, sider and mounting bracket (q4) , m - seal as per is 9197 (q3) , stainless steel butt hinges as per is 12817 (q3) , chlorinated polyvinyl chloride (cpvc) pipes for potable hot and cold water distribution supplies (v2) as per is 15778 (q3) , globe valve as per is 778 (q3) , towel rail / ring for bathroom (q3) , steel back flap hinges-is:3843 (q3) , tapping screws (q3) , hasps and staples as per is 363 (q3)

corporations/Associations/Others

CTN :43198517

29 Dec, 2025 NA

Ahmedabad - Gujarat

Tender For supply of lock stoppers as per is 1223

Central Government/Public Sector

CTN :43141427

22 Dec, 2025 NA

Visakhapatnam - Andhra Pradesh

Tender For supply of non opening type side scuttles (dia 300mm) with stainless steel frame along with dead light s as pe

CTN :43127457

20 Dec, 2025 1.50 Lacs

Leh - Jammu And Kashmir

Tender For supply of bldc motor complete set with esc , omni directional antenna assy housing , arm lock stoppers , 32 pin nav cam cable , gimbal pitch motor , arm lock hinge lever , vio dome , led lens , vio navigation camera

State Government

CTN :43050595

24 Dec, 2025 3.00 Lacs

Multi City - Chhattisgarh

Tender For single wall extension ladder telescopic model two interlocked ladder it can lock at any height and adjustable, description:- side c section 65mm x 38mm steps 25.4mm dia non slip corrugated tubing permanent punching in machine fitted & operate with (nylon) polypropylene rope pulley arrangement with bracket, lockable stoppers. solid rubber shoes and caps. size;- 10 to 20 feet extended height.make- alco & equivelent

CTN :42936248

17 Dec, 2025 NA

Mumbai - Maharashtra

Tender For tender for supply of 01.size clear opening diameter 800 mm 02.color green on both sides.the handles to be marked with photo luminescent tapes. 03.opening mechanism-escape scuttles are to be spring assisted and provided with a wheel assembly on the inside and a slot with a detachable operating handle from outside for opening and closing of the scuttles.the operating handle should be supplied with associated bulkhead-mountable press-fit clamps to enable securing the operating handle onto the bulkhead. 04.material- as per class requirement 05.all ees are to be flush type spring assisted with auto retention clip and operable from above and below by one person.they are to be provided with an opening arrangement from above with detachable operating handle and press-fit clamps for securing the handle on to the nearest bulkhead. 06.ees are required to operable from both sides and tested up to 1.2 bar pressure or as per class requirement 07.marking- each scuttle should have punch mark with oem name date of fabrication month and year .marking symbols should be prominent legible and i.a.w. with nes118 and nes119. 08.rubber beading-rubber beading of silicone as per ncd 5910 are to be used for the ees , on board spares for ess consisting of the following -1.ss nuts and bolt sets- 10 nos -2.ss screws-10 nos -3.brass washers-10 nos -4.split pins-04 nos -5.silicon rubber beading-04 mtrs -6.adjustable spanner-01 nos , documentation -1.class approved drawings- 01 nos. -2.technical -operating-installation-testing and maintenance manual-01 nos. -3.inspection release note-inspection reports of inspection agency-certified test reports-materialtest reports-certificate for dimensional accuracy weight certificates with position of c.g etc-01 nos. -4.soft copy of all above documents in cd or pen drive-01 nos. , 01.size clear opening diameter 800 mm 02.color green on both sides.the handles to be marked with photo luminescent tapes. 03.opening mechanism-escape scuttles are to be spring assisted and provided with a wheel assembly on the inside and a slot with a detachable operating handle from outside for opening and closing of the scuttles.the operating handle should be supplied with associated bulkhead-mountable press-fit clamps to enable securing the operating handle onto the bulkhead. 04.material- as per class requirement 05.all ees are to be flush type spring assisted with auto retention clip and operable from above and below by one person.they are to be provided with an opening arrangement from above with detachable operating handle and press-fit clamps for securing the handle on to the nearest bulkhead. 06.ees are required to operable from both sides and tested up to 1.2 bar pressure or as per class requirement 07.marking- each scuttle should have punch mark with oem name date of fabrication month and year .marking symbols should be prominent legible and i.a.w. with nes118 and nes119. 08.rubber beading-rubber beading of silicone as per ncd 5910 are to be used for the ees , on board spares for ess consisting of the following -1.ss nuts and bolt sets- 10 nos -2.ss screws-10 nos -3.brass washers-10 nos -4.split pins-04 nos -5.silicon rubber beading-04 mtrs -6.adjustable spanner-01 nos , documentation -1.class approved drawings- 01 nos. -2.technical -operating-installation-testing and maintenance manual-01 nos. -3.inspection release note-inspection reports of inspection agency-certified test reports-materialtest reports-certificate for dimensional accuracy weight certificates with position of c.g etc-01 nos. -4.soft copy of all above documents in cd or pen drive-01 nos. , 01.size clear opening diameter 800 mm 02.color green on both sides.the handles to be marked with photo luminescent tapes. 03.opening mechanism-escape scuttles are to be spring assisted and provided with a wheel assembly on the inside and a slot with a detachable operating handle from outside for opening and closing of the scuttles.the operating handle should be supplied with associate

Lock Stopper Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

Central Government/Public Sector

State Government