Latest lock Tenders | Government lock Tenders

Central Government And Public Sector

CTN :42123508

21 Oct, 2025 46.28 Lacs

Muzaffarnagar - Uttar Pradesh

Tender For supply of material and complete items of works for under the work of special repair to conservation and restoration of collapsed boundary walls of tomb of diwan saiyed mohammad khan majhera muzaffarnagar - items to be executed, u/s lime, surkhi, coarse sand, brick aggregate 20 mm-25 mm, belgiri, gum, gur, mud, modern bricks 2nd class, kail wood sleeper (3.05x 2.05x0.10 m), r.r. stone, c.r. stone, careful dismantling of roof in random rubble masonry over bhurji in lime concrete, executed manually to preserve adjacent architectural features and reusable stone material. the work shall be carried out under direction of engineer in- charge, ensuring minimal vibration and no damage to adjoining historic fabric., earth work in excavation by mechanical means (hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed,, providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia m.s. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with m.s. tubes, m.s. tube challies, m.s. clamps and m.s. staircase system in the scaffolding for working for the required duration as approved and removing it there after. the scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of engineerin- charge. the elevational area of the scaffolding shall be measured for payment purpose. the payment will be made once irrespective of duration of scaffolding., surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m, provision for removal of malba for cleaning the sites including collecting, staking and disposal of the rubbish /malba upto 100 meter lead including all the labour and transportation etc complete. out of the monuments premises and further, filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 and for all lift, layer by ramming and watering, lead up to 50 and for all

Central Government And Public Sector

CTN :42123496

21 Oct, 2025 67.01 Lacs

Najibabad - Uttar Pradesh

Tender For supply of materials and job work under the work of mc ew c of am special repair to conservation and restoration of entrance gateway of portion of old palace najibabad bijnor 2025 26 - items to be executed, u.s. lime, surkhi, coarse sand, lakhori brick, brick aggregate, sal wood, belgiri, gum, gur, demolishing lime concrete manually/ by mechanical means and disposal of material within 50 metres lead as per direction of engineer- in-charge., demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of engineer - in - charge. 15.2.1 nominal concrete 1:3:6 or richer mix (including equivalent design mix), demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer-in charge. 15.7.4 in cement mortar, taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead :15.13.1 of area 3 sq. metres and below, dismantling wood work in frames, trusses, purlins and rafters up to 10 metres span and 5 metres height including stacking the material within 50 metres lead : 15.14.1 of sectional area 40 square centimetres and above, providing and fixing double scaffolding system (cup lock type) on the exterior side of building/structure, upto 25 metre height, above ground level, including additional rows of scaffolding in stepped manner as per requirement of site, made with 40 mm dia m.s. tube, placed 1.5 metre centre to centre, horizontal & vertical tubes joint with cup & lock system with m.s. tubes, m.s. tube challis, m.s. clamps and staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for execution of work of cleaning and/ or pointing and/ or applying chemical and removing it thereafter. the scaffolding system shall be stiffened with bracings, runners, connecting with the building etc, wherever required, if feasible, for inspection of work at required locations with essential safety features for the workmen etc., complete as per directions and approval of engineer-in charge. note:- (1) the elevational area of the scaffolding shall be measured for payment purpose. (2) the payment will be made once only for execution of all items for such works. ( including errection & dismental after work), disposal of rubbish/malba heap,soil etc. from monument to outside of municipal limit by tractor trolly including excavation loading and unloading etc.requirement proper completion of work at monument /site, provision for providing & making lime slacking & mortar pit by means of pit excavation, brick masonry & plastering over it. the size of the over all pit is 8.00m x 3.00m & depth is 0.90m. the pit is divided in to three parts & cement plaster, painting (two or more coats on new work) with oil type wood preservative of approved brand and manufacture, painting(one or more coats) with black japan paint of approved brand and manufacture to give an even shade

Central Government/Public Sector

CTN :42127571

17 Oct, 2025 NA

Amritsar - Punjab

Tender For supply of hydraulic hose pipe set for lock bolting machine to connect avlock/avdel/stanley/crimpwell make power pack to installation tool, 15 meter long

Central Government/Public Sector

CTN :42127468

10 Oct, 2025 NA

Lucknow - Uttar Pradesh

Tender For supply of lock washer mb-12 for 18kw

Central Government/Public Sector

CTN :42126722

18 Oct, 2025 NA

Ghaziabad - Uttar Pradesh

Tender For supply of lock assembly for machine room door for three phase

Central Government / Public Sector

CTN :42119871

16 Oct, 2025 NA

Rampur-Up - Uttar Pradesh

Tender For supply of mechanical spares at pattikalan lpg bp c c - steel , sprocket 16 teeth, 65mm, cs, cast steel , shaft, dia 40, en 11, 40x355 key 25x6 , shaft, dia 40, en 11, 40x406 key 25x6 , shaft, dia 65, en 11, as per plant specification , lot adaptor brass , self closing sc adaptor brass , pin broken adapter with nrv , uhmw teflon strip for conveyer t 10mm w 40mm , tyre 3.50.08 , tube 3.50.08 , counter weights landr set , 18mm end bore , wt 24 2x400 diffuse sensor sick , wl24 2x430 reflective sensor sick , sensor cable 5 metre , crocodile clip for tld bay , gear box fan 35 mm bore snu 5 sr. no. 285693 , gear box fan 38 mm bore snu 6 sr. no. 285992 , gear box fan 40 mm bore snu 7 sr. no. 631886 , gear box fan cover sr. no. 285693 , gear box fan cover sr. no. 285992 , gear box fan cover sr. no. 631886 , gear box oil seal snu 5 sr. no. 285693 , gear box oil seal snu 6 sr. no. 285992 , gear box oil seal snu 7 sr. no. 631886 , fastner 10x100 , fastner 16x150 , allen bolt 6x20 ht, alloy steel , allen bolt 8x25mm ht, alloy steel , allen bolt 10x25mm ht, alloy steel , allen counter bolt 8 mmx12 mm , alloy steel , ms bolt 8x75 , ms bolt 10 mmx45 mm , ms bolt 12 mmx45 mm , ss lock nut 6mm , ss lock nut 8mm , ss lock nut 10mm , ss lock nut 12mm , lock nut 16x40mm with washer , pressure gauge 0 7 x 4 inch , pressure gauge 0 16 x 4 inch , pressure gauge 0 21 x 4 inch , pressure gauge 0 42 x 4 inch , pressure gauge 0 70 x 4 inch , pressure gauge 0 140 x 4 inch , pressure gauge 0 16 x 6 inch , pressure gauge 0 28 x 6 inch , pressure gauge 0 35 x 6 inch , temperature gauge 0 100 x 4 inch , ms c channel 100x50x6mm 6mtrs , ms c channel 75x40x6mm , gi sheet 4ft width ,22 gauge , ms iron sheet 8inch by 4 inch , ms strip 40 x 6mm 6 mtrs , ms strip 25x5mm , ms strip 20x5mm , gi earthing strip 50x6 , ms angle for conveyor 40mm x 40mmx6mm , ms angle for conveyor 50mm x 50mmx6mm , ball valve 0.5 inch class 800 sw , ball valve 0.75 inch class 800 sw , ball valve 1 inch class 800 sw , nrv 1 inch, class 800, sw , nrv 0.5 inch, class 800, sw , gate valve 3 inch, class 150, flanged , nrv 3 inch, class 150, flanged , metallic gasket 0.5 inch class 300 , metallic gasket 0.75 inch class 300 , metallic gasket 1 inch class 300 , metallic gasket 2 inch class 300 , metallic gasket 2.5 inch class 300 , metallic gasket 3 inch class 300 , metallic gasket 4 inch class 300 , metallic gasket 6 inch class 300 , metallic gasket 8 inch class 300 , thermal safety valve tsv 0.75 inch , welding rod bundle of 5 packets of grade e6013 8mm , cutting wheel 5 inch , cutting wheel 4 inch , cutting wheel 14 inch , grinding wheel 4 inch , hydraulic motor 105 1141 006 , anti static rubber mat 2000x1000x25 , straight stopper without piston , double stopper without piston , lead seal for 47.5 kg , lead wire for 47.5 kg , lot valve washer , lot valve o ring , safety cap for 47.5 kg lot , nylon thread for safety cap 310 mm , ss clips for safety cap , belt 255l, conti hi tech , antistatic v belt spb 2360 , antistatic v belt spc 4350 , antistatic v belt spc 4550 , bearing 30210 , bearing 6406

Central Government / Public Sector

CTN :42122188

16 Oct, 2025 NA

Jagatsinghapur - Odisha

Tender For tender for supply of stud w 2 nut b16 7 3 1 4xx735lg un8 , plate 100x80x0.5thk. ss 321 p n 536 , plate 80x80x0.5thk. ss 321 p n 535 , plate 181x100x0.5thk ss321 p n 528 , plate 125x80x0.5 thk. ss 321 p n 527 , plate 140x80x0.5 thk. ss 321 p n 526 , plate 159x80x0.5thk ss 321 p n 525 , plate 185x80x0.5thk ss 321 p n 524 , closing plate 228x80x0.5thk ss321 , split key 3thk ss 321 p n 519 , split key 3thk. ss 321 p n 721 , plate 65x60x0.5thk ss 321 p n 736 , plate 77x60x0.5thk ss 321 p n 735 , plate 125x60x0.5thk ss 321 p n 734 , closing plate 180x110x0.5thk ss 321 , closing plate 65x60x0.5thk ss 321 , closing plate 77x60x0.5thk ss 321 , closing plate 125x60x0.5thk ss 321 , u bolt p n 1524 godrej , stud w 2hex.nut sa193gr.b7m 5 8 uncx140l , split key 3thk ss 321 p n 821 , split key 3thk. ss 321 p n 921 , split key 3thk. ss 321 p n 1121 , split key 3thk. ss 321 p n 1528 , rec. washer 100x50x6thk. sa 240 type 321 , washer 100x60x6thk.sa 240 type 321 , closing plate 133x80x.5thk ss 321 , closing plate 154x80x.5thk ss 321 , closing plate 183x80x.5thk ss 321 , closing plate 234x80x.5thk ss 321 , split key 3thk ss 321 p n 1627 , closing plate 130x80x.5thk ss 321 , closing plate 194x110x.5thk ss 321 , hex.nut m16x2p sa 194 gr.8 p n 1625 , split key 3thk. ss 321 p n 1866 , hex.nut m16x2p sa 194 gr.8 p n 1828 , nut m12 a193 b8t p n 1915 , bolt hex ss 321 m12 x 45 mm , wedge stay bar 12 diax55lg ss 321 , wedge stay 75x27x6thk. sa 240 type 321 , wedge stay 49x27x6thk sa240 type 321 , wedge stay 43x27x6thk. sa 240 type 321 , wedge stay bar 12 diax30lg ss 321 , wedge stay 120diax30lg ss 321 p n 1316 , wedge stay 47x27x6thk. sa 240 type 321 , wedge stay 181x27x6thk sa 240 type 321 , split key 3thk. ss 321 p n 1731 , wedge stay 41x27x6thk. sa 240 type 321 , stud w 2nut a193 b7 a194 4 m56xp5.5x550 , lock nut m10 .p.no 406 , washer od32xid11x3thk.p.no 451 , nut hexhd ss 304 m10 , nut lock hex ss316 m10 , stud 2nut sq hd b7m 2hm unc 1 1 4 16 2 5

State Government

CTN :41814501

10 Oct, 2025 NA

Dhanipur - Uttar Pradesh

Tender For corrigendum : supply of surgical instrument items d d - drill sleeve 1.5 short with thread for mandible , drill sleeve 1.8 short with thread for mandible , screwdriver shaft mandible short not self holding , holding sleeve short , screwdriver shaft mandible long self holding for he , drill bit 1.5 mm with stop length 50 by 8 mm 2 flute for j , drill bit 1.5 mm length 90 mm for j latch coupling for , drill bit 1.5 mm with stop length 44.5 by 4 mm 2 flute for mini quick coupling , drill bit 1.5 mm with stop length 44.5 by 6 mm 2 flute for mini quick coupling , drill bit 1.5 mm with stop length 44.5 by 12 mm 2 flute for mini quick coupling , mandible screw 2.0 mm self tapping length 6 mm ti , mandible screw 2.0 mm self tapping length 8 mm ti , mandible screw 2.0 mm self tapping length 10 mm t , mandible screw 2.0 mm self tapping length 12 mm t , mandible screw 2.0 mm self tapping length 14 mm t , mandible screw 2.4 mm self tapping length 8 mm ti , mandible screw 2.4 mm self tapping length 10 mm t , mandible screw 2.4 mm self tapping length 12 mm t , mandible lock screw 2.0 mm self tapping length 6 m , mandible lock screw 2.0 mm self tapping length 8 m , mandible lock screw 2.0 mm self tapping length 10 , mandible lock screw 2.0 mm self tapping length 12 , mandible lock screw 2.0 mm self tapping length 14 , mandible mini tension band plate narrow centre 2 plus 2 h , mandible mini tension band plate narrow centre 3 plus 3 h , mandible mini tension band plate narrow centre 3 plus 3 , mandible adaption plate 12 holes thickness 1.0 mm p , mandible adaption plate 20 holes thickness 1.0 mm p , mandible plate square 4 holes thickness 1.0 mm mal , mandible strut plate 8 holes thickness 1.0 mm malle , mandible strut plate curved 8 holes thickness 1.0 m , mandible plate crescent 2 plus 2 holes thickness 1.25 mm , mandible dcp plate angled 3 plus 3 holes thickness 1.25 , mandible plate straight 12 holes thickness 1.5 mm , mandible plate straight 20 holes thickness 1.5 mm , mandible plate angled 3 plus 3 holes thickness 1.5 mm p , mandible dcp plate 2 plus 2 holes thickness 1.5 mm pure , mandible plate crescent broad centre 3 plus 3 holes thi , mandible mini tension band plate broad centre 2 plus 2 ho , mandible mini tension band plate broad centre 2 plus 3 ho , mandible mini tension band plate broad centre 3 plus 3 ho , mandible adaption plate 12 holes thickness 1.25 mm , mandible subcondylar lambda plate right 7 holes thickness 1.0 mm , mandible subcondylar lambda plate left 7 holes thickness 1.0 mm , mand subcondy strut pl r 5ho t1 ma , mandible subcondylar strut plate left 5 holes thickness 1.0 mm , mandible subcondylar trapezoidal plate small 4 holes thickness 1.0 mm //bid details 2 / 36

State Government

CTN :42119901

22 Oct, 2025 NA

Varanasi - Uttar Pradesh

Tender For supply of supply of trauma implant - locking plate , t-buttress locking plate , distal femoral locking plate , proximal humerus locking plate , small t locking plate , distal tibial metaphyseal locking plate , lateral tibial locking plate , lateral tibial lcp 4.9 mm , medioto locking plate , richard d.h.s. barrel locking plate , 95 degree d.c.s. locking plate , 95 degree dcs plate d.c. hole , 1or3 tubular locking plate , distal tibia medial lcp 3.5 mm , clavicle medial locking plate , philos locking plate long or short , calcaneal locking plate , superior anterior clavicle locking plate , distal medial humerus metaphyseal locking plate , distal humerus medial locking plate , distal humerus dorsolateral with support lcp , distal humerus dorsolateral without support lcp , distal radius volar locking plate , va dorr volar v2 lcp head 06 h , va dorr volar v2 lcp head 07 h , posterior medial proximal tibial locking plate , anterolateral distal tibia locking plate , olecranon w.o.s. lcp , u distal radius dorsal locking plate , distal radius dorsal locking plate l shape head 2 h and head 3h t shape oblique shape straight plate , clavicle hook locking plate , extra articular distal humerus lcp plate , proximal tibia medial locking plate , radial head neck or rim locking plate , distal radius styloid lcp left or right , va d or r volar rim lcp head 06 h , va d or r volar rim lcp head 07 h , locking cancellous screw 4.9 mm , locking screw 2.7 mm , locking screw 2.7 mm s.h. , locking cancellous screw 3.5 mm fully th , wire mount , distal radius extra articular lcp head 5 hole , va d or r extra articular lcp head 5 hole , distal radius oblique articular lcp head 5 hole , va d or r oblique articular lcp head 5 hole , distal radius buttress lcp head 5 hole , va d or r buttress lcp head 5 hole , distal fibula va lcp with out support , anatomical proximal tibia locking plate left or right low bend , antero medial distal femur locking plate , periprosthetic cable locking plate , periprosthetic lock screw torx 5.0mm , needle free cable with lock , patella star locking plate , lateral support lcp for p.f.nail and profaan , cal-lock anterior lcp w.g. and w.o.g , cal-lock posterior lcp , cal-lock combined lcp w.g. and w.o.g , posterior distal tibia lcp , scapula medial or lateral lcp , cannulated bone screw 7.0 mm , medial or lateral distal femur osteotomy lcp , lm pelvic cu. plate 3.5 mm r-108 , r-88 , lm pelvic straight plate 3.5 mm , lm pelvic symphyseal plate 3.5 mm , lm pelvic spring plate 3.5 mm , lm pelvic j plate 3.5 mm r-88 left or right , lm pelvic infrapectineal plate left or right , lm pelvic quadrilateral surface plate , lm pelvic suprapectineal plate w.s. left or right , tibio talar calcaneal fusion nail , ttc compression screw , small lcp 2.0 mm straight , t shape head 2hhead 3, y shape , condylar plate , rotation correction lcp 2.0 mm , 3d lcp plate 2.0 mm , locking screw 2.0 mm s.h. , cortical screw 2.0 mm s.h. , straight lcp 2.4 mm , t lcp 2.4 mm head 2 h head 3 h, condylar plate, y shape , locking screw 2.4 mm s.h. , cortical screw 2.4 mm s.h. , locking screw 2.7 mm for foot s.h. , metatarsus lcp 2.4or2.7 mm l shape, l bolique, t plate head 2h head 3h , cuboid lcp 2.4or2.7 mm , navicular lcp 2.4or2.7 mm , talus lcp 2.4or2.7 mm //bid details 2 / 141 , 2 hole gap lcp 2.4 or 2.7 mm , va x lcp 2.4or2.7 mm , va straight fusion lcp 2.4 or 2.7 mm , va l fusion lcp 2.4 or 2.7 mm left and right , va t fusion lcp 2.4 or 2.7 mm , va cloverleaf fusion lcp 2.4 or 2.7 mm , va open wedge osteotomy lcp 2.4 or 2.7 mm , va first mtp fusion lcp 2.4 or 2.7 mm left and right , va first tmt fusion lcp 2.4 or 2.7 mm , va tmt fusion lcp 2.4 or 2.7 mm , va medial column extended fusion lcp , va dual ray 1st- 2nd tmt lcp , calcaneal step lcp , anterior ankle fusion lcp - l or r , anterior tibiotalar fusion lcp - l or r , beveled screw 3.5 mm or 4.0 mm , hcs ft screw 3.5 mm or 4.0 mm , hcs ft screw 5.0 mm , hcs ft screw 6.5 mm , round clamp , connection r

State Government

CTN :42134773

07 Oct, 2025 20.18 Lacs

Leh Ladakh - Jammu And Kashmir

Tender For construction of fending of fisheries department land at kaya hunder by way of providing and laying inter lock tiles etc. (under capex)

Lock Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors