Latest locking nut Tenders | Government locking nut Tenders

Corporations/Associations/Others

CTN :40810771

14 Jul, 2025 4.77 Lacs

Multi City - Karnataka

Tender For corrigendum : repairs of 500 mm dia ci inlet pipeline of 15 lakh liter oht and providing ms pipeline at kuvempunagar mbr and providing ms pipeline and installation of spindle check nut to sluice valve at datagalli 3rd stage oht, mysuru

Central Government/Public Sector

CTN :40990522

15 Jul, 2025 NA

Multi City - Multi State

Tender For supply of nylon insert self locking nut size m16 mm, matric thread, zink plated matterial

State Government

CTN :40371745

09 Jul, 2025 3.33 Lacs

Sarni - Madhya Pradesh

Tender For corrigendum : procurement of spares of 25hp and 10hp pumps for drinking system of stps, sarni - supply of spares for 25 hp pump unifilter plant at stps, ph-3 sarni.make b. e. pumps, model-m1024kk, shaft (s.s) with key,nut and half round key, gland check nut p/e (gun-metal), gland check nut f/e (gun-metal), impeller guide bush (gun-metal), bearing bracket p/e (c.l.), bearing bracket f/e (c.l.), impeller (c.l.), tie bolt & nut (ms) m16 x 360 mm, tie bolt & nut (ms) m16 x 44.5 mm, supply of spares for 25 hp pump unifilter plant at stps, ph-3 sarni.make b. e. pumps, model-m1024kk, shaft with matching nut, impeller c.i., bearing bracket (c.i.), suction cover (c.i.), bearing cover (aluminum alloy), gland cap (c.i.)

Central Government / Public Sector

CTN :40990863

17 Jul, 2025 NA

Multi City - Multi State

Tender For supply of set of g.i. bolts various sizes consists of(i) g i u bolts 14 mm for (large) 14 mm for (large)-80 nos.(ii) gi bolts 16x50x37mm with nut, check nut & spring washer-70 nos.(iii) gi bolts 16x65x37mm with nut and split pin-60 nos.(iv) gi bolt 18x75x45mm with nut & split pin-25 nos.(v) gi bolt 16x40x35mm with nut & 4mm split pin- 16 nos.(vi) gi bolt 16x30/25mm- 60nos.(vii) gi bolt 16x40/32 with hole-100 nos.(viii) gi bolt 16x50/38- 500 nos.(ix) gi bolt 16x50/40-60 nos.(x) gi bolt 16x60/38 with/without hole- 60 nos.(xi) gi bolt 16x65/38 mm- 50 nos.(xii) gi bolt 16x75/38- 40 nos.(xiii) gi bolts 16x260/100mm-40 nos.(xiv) gi bolts 16x360x100mm-40 nos.(xv) gi bolt 20x70x50mm-40 nos(xvi) gi bolt 20x260x100mm-40 nos.(xvii) gi bolts 20x470/100mm-40 nos.(xviii) gi bolts 20x550/100mm-40 nos.(xix) gi bolts 20x650/100mm-50 nos.(xx) gi bolts 20x700/100mm- 50 nos.(xxi) gi snap head pin 20x55 mm-50 nos.(xxii) gi snap head pin 20x60 mm-50 nos.(xxiii) gi snap head pin 20x50 mm-50 nos. spec:ti_spec_ohe_fasteners_0120_rev_1, drw:eti c 0074, eti c 0073, str:core-str-15.

Central Government And Public Sector

CTN :40977994

28 Jul, 2025 NA

Multi City - Multi State

Tender For supply of ms plate size 16mm , ms plate size 18mm , ms plate size 20mm , ms plate size 28mm , 90 degree ms angle size 25mm , 45 degree ms angle size 25mm , ms hex bolt with nut 12x1.75x40 mm , hex screw m24x3x100 lg, material ss410 , hex screw m24x3x50, material ss410 , hex screw m24x3x125 lg, material ss410 , ss hex bolt with nut 3by8mmx16gx1 inch , ms hex bolt with nut 32x3.5x350 , ss hex bolt with nut 20x2.5x100 , ms hex bolt with nut 12x1.75x35 , ms hex bolt with nut 18x2.5x120 , ss ball valve 1 inch class 150 female thread , ss 90 degree elbow 1 inch , ss 45 degree elbow 1 inch , ss ball valve 1.25 inch class 150 female thread , ss 90 degree elbow 1.25 inch , ss 45 degree elbow 1.25 inch , 1by2 inch ball valve steel , 1by2 inch 90 degree elbow steel , 1by2 inch 45 degree elbow steel , d spanner 18x19 , ring spanner 18x19 , slide wrench 8 , slide wrench 12 , pipe wrench 8 , pipe wrench 12 , 1by2 to 1by4 inch female adapter npt , 1by4 to 1.25 inch ss adapter with 60 degree cone both side , 1by4 to 1by2 inch male adapter npt , 3by4 to 1by2 inch male adapter npt , 3by8 inch female to 1by2 inch male adapter npt , nrv 6 inch check valve , nrv 4 inch check valve , ms union 1by2 inch , ms rod hexagonal 25mm , ms rod hexagonall 40mm, 1.5 inch , 20 inch flange class 300 , brass rod 2 inch , brass rod 1.5 inch , brass rod 2.5 inch , foot valve 3 inch , pvc suction hose pipe 3 inch dia , pvc suction hose pipe 6 inch dia , clamp 4 inch , clamp 6 inch , 1by2 inch x 14 tpi bsp hss round die , o-ring 3mm , o-ring 4mm , o-ring 5.3mm , o-ring 5.7mm , o-ring 6mm , o-ring 8mm , o- ring 8.5mm , o-ring 9mm , rubber gasket sheet size 2mm , rubber gasket sheet size 3 mm , rubber gasket 2.5mm exact , steel putty 3473 , thread locker 263 , si 5900 flange sealant , sealant 495 , super metal composite 1111 , maintain 100 , m seal 75gm , hydraulic sealant 545, 50ml pack , pipe repair kit , sf 790 gasket remover 510 gm , weldon shank 3by4 inch drill bit set 6,8,10,12,16,20 mm , compressor belt size c90 1 34 , filteration plant belt a800, a30 poly f plus , new hp compressor belt 30440903 - 1000015342 , 50 hp blower belt - b3500 b136 , shaper machine belt b56 , auto darkening welding helmet , test hose stauff minimess hose g-1by4 dn4 , elc 50c cover , cutting wheel 4 inch , flap disc 4 inch , buffer wheel ag-4 , abrassive belt with cloth backing, grain- al oxide , cut resistant hand gloves, cut level 4 , die penetration test kit consisting of cleaner, penetrant and developer , filler gauge .02 to 1.00mm, 600mm length , foam-spung for oil soaking 2 inch thick, size- 4 ft x 6ft , plastic can 2 ltr , box spanner 65mm, phosphate finish , bucket 20l , digital vernier caliper , carbide drill bit set 1 to 13mm , tungsten carbide tipped tool for machining , scotch self bonding tape 3.8x9.15x0.075 cubic cm , t30 compressor oil of 5 ltr pack , gland 10mm , taflon tape , ht insulation tape 25mm wide 25m long roll , measuring tape 3 mtr , ss scale of 6inch length , hose wp 700 bar e6 series with coupling set of c604 , marker parmanent type , welding electrode 7018 - 3.15mm , welding electrode 7018 - 4 mm , welding electrode 7018 - 2.50mm , welding electrode 6013 - 3.15mm , welding electrode 6013 - 2.50mm , welding electrode e-308 - 3.15 mm , welding electrode cast iron - 119e size 2.50mm , star coupling rubber buna-n , gasket 2mm non asbestos , caf gasket 3mm thick- non asbestos //bid details 2 / 76

Co-operative

CTN :40953951

10 Jul, 2025 1.50 Lacs

Bahraich - Uttar Pradesh

Tender For skscm/ supply of thyssen krupp make 1750 kg charge centrifugal machine spares /2025-26 - thyssen krupp make 1750 kg/charge centrifugal machine spares, polyurethene rubber star for coupling, oil seal 110 x 140 x 15, oil seal 170 x 200 x 15, o ring 110 x 3, o ring 140 x 4, o ring 240 x 5, v seal 160 dia, angular contact ball bearing 7228 bcbm, cylindrical roller bearing nu 228 ecml / c3, circlip dia . 140 x 4 mm, tension set 110 x 160 x 45 ( for coupling . ), rubber buffer, brass inner screen, rubber section bordering, spray nozzle flat jet 90 deg, set of tension ring for plough 60 x 68 x 12 ( 1 set = 3 ring pairs ) with pressure ring ., set of brass wearing plate for plough ( 1 set = 3 nos . ), seal kit for 5 " dia cylinder make duncan, rubber ring dia 909 nitrile rubber, rotary distributor, rubber seal kit for pneumatic cylinder 6 " x 8 1/2 ", rubber seal kit for rotary distributor, rubber seal kit for 2 " dia . cylinder make kushako, rubber seal kit for 3 " pneumatic cylinder make kushako, teflon seat for spindle locating arrangement, repair kit for butterfly valve 300 nb make deltorq, repair kit for butterfly valve 200 nb make deltorq, seal kit for pneumatic ball valve 25 nb make deltorq, rubber diaphragm for brake, brake pads ( 1 set of 4 nos . ), tension spring for brake lever, torsion spring for brake, spring for brake pads, solenoid valve 3013 sr no 21038213-33/200 make rotex, solenoid valve 3012 sr no 21038213-33/200 make rotex, seal kit for solenoid valve 3013 make rotex, seal kit for solenoid valve 3012 make rotex, coil for solenoid valve 3013/3012 make rotex, proximity switch m 30 x 65 model sw4051pcd1v30(pnp) no- make jaishree, proximity switch m 50 x 65 model sw4061pcd1v60(pnp) nc wobbling sensor make jaishree, proximity switch m 18 x 60 make jaishree, pilot operated non return valve with adapter - 3/8 ", flow control valve 1/2 make servo, flow control valve 1/4" make servo, air filter 1/2 " make kushako, air pressure regulator - 1/4 " make kushako, flexible hose pipe 1 " x 1100 mm, flexible hose pipe 1/2 " x 1200 mm, flexible hose pipe 1/2 " x 800 mm, flexible hose pipe 1/2 " x 900 mm with banjo connection ., flexible hose pipe 3/8 " x 1000 mm with banjo connection, flexible hose pipe 3/8 " x 800 mm, flexible hose pipe 1/4 " x 1000 mm, flexible hose pipe 1/4 " x 700 mm, spares for banjo connection, wire rope 3 mm dia ., repair kit for oil mist lubricator 10 - sn9 make kushako, repair kit for lubricator head for 10 - sn9 make kushako, ventury plug assembly for lub 10- sn9, massquite thickness controller sr no 660 modal mtc-p3a make hevamb udyog., lubricator model no luv 2016 size 1/2 bsp fitting make kushako, pressure switch model no psm -520-100 sr no 10982 indfos, seal kit for actuator size 12 sr no 13001601-14 make delval, seal kit for actuator size 8 sr no 13001603 20 make delval, complete actuator with valve rotory no of spring -09 type sr make deltorn, rubber sheet for butterfly valve size 12 sr no 1003376-14 make delval, rubber sheet for butterfly valve size 8 sr no 5008b-20001119-02 make delval, actuator size 12 act size dt115 da sr no 13001601-14 make delval., actuator size 8 act size dt100 da sr no 13001603-20 make delval., butterfly valve size 12 sr no 1003376 14 make delval., butterfly valve size 8 sr no 50080b-20001119-02 make delval., bottom valve cylender 1-mounting shaft part a, 2-allen bolt m-6 x20, 3-g.m gide bush, 4- top end cover, 5- piston seals, 6- o ring for piston sealing, 7- o ring for shaft sealing, 8- o ring for open close ports, 9- o ring for air pass sealing, 10- polymer ring for dusting, 11- wiper seal, 12- o ring for gide bush air sealing, 13- shaft seals, 14- h.t allen bolt m-8x40, 15- h.t allen bolt m-8x25, 16- h.t allen gruv m-12x15, 17- piston check nut, 18- dumping ring, feeding chute kb1750, pneumatic cyl drg nipl-c110196, transition piece (feeding chute), proxy switch b18x65, ss water spray assembly kb1750, ss water spray pipe fabrication; kb1750, packing ca-5546-4/0 nitrile fo

CTN :40974154

28 Jul, 2025 NA

Mumbai - Maharashtra

Tender For tender for supply of threaded rod , pin , hose clip , hose clip , key , parallel key , parallel key , lock nut , bearing , anti vibrant pad , bushing , pipe coupling , coupling , seal , elbow coupling , o ring , seal washer , seal washer , seal washer , seal washer , seal washer , o ring , o ring , o ring , o ring , o ring , o ring , sealing ring , grommet , connector , terminal , eccentric ring , spring , contact block , contactor , oil sight , membrane , muffler , rubber buffer , elbow , valve , hose assembly , oil pump kit , drain valve kit , air valve kit , air filter element , h.p.element exchange kit , hose nipple , fuel oil filter ( p.no.t5516f) , bolt , hex bolt , hose clip , pipe coupling , seal washer , o ring , o ring , o ring , o ring , safety valve , contact block , emergency stop button , circuit breaker , check valve , sealing ring , element lp t1 , demister , sealing ring , strainer , rubber element , disk spring , ring , filter kit , drain valve kit

CTN :40974894

26 Jul, 2025 NA

Visakhapatnam - Andhra Pradesh

Tender For supply of open type recip compressor bitzer model6g2y-k , ac plant 47 tr , valve plate assembly part no. 08498 , set shaft seal part no08012 , set piston-conn.rod w.3 rings part no. 08491 , set piston dia 80 (optimized) part no. 80106 , set connecting rod part no. 08435 , set shut-off valve nw38 part no. 08398 , set shut-off valve nw50 part no. 08087 , set sight glass part no. 08130 , set cylinder cover standard part no. 08830 , set front bearing part no. 08179 , set rear bearing part no. 08465 , set oil pump part no. 08795 , set oil filter not shown part no. 08457 , filter suction side part no. 05983 , pressure regulator oil , cpl. part no. 04965 , shut-off valve 7/16 unfx1by4 part no. 07559 , set of gaskets for condenser 47tr ac plant for ekm submarine , bolt for cathodic protector , set of gaskets for evaporator47tr ac plant for ekm submarine , flexible coupling model qdc-276/80 ns , thermo expansion valve sporlan mve-26 vc charge7/8 , filter drier sporlan c14411g 1-3by8 ods , liquid line strainer 1-3by8 ods , valve globe type 2-1by8 ods , check valve in discharge line , globe valve in liquid line , locking screw 1by8 nptf part no. 05514 , hexagon head screw m10x75 part no. 06828 , hex. head screw m8x70 part no. 05439 , sealing cap 5by8 unf part no. 05547 , union nut 5by8 unf part no. 05531 , hex. head screw m16x110 part no. 05755 , hex head screw m12 x 80 part no. 05467 , ring screw m12 part no 06236 , union nut 7by16 unf part no. 05528 , seal ring 27x22xx2 part no. 05342 , threaded pin din 8906 part no. 05540 , hex. head screw m10x30 part no. 05846 , set oils.heat.140w 110-130 part no. 08430 , hex head bolt m16x2x60l nab , hex nut m16x2 nab , washer spring , jack-screw , compressor discharge pressure gauge , compressor suction pressure gauge lube oil , pressure gauge 65 dial 0 to 60 kg cm2 for water , sw pressure gauges , seawater differential pressure gauge , temperature gauge 100 dial 0 to 100 deg c , temperature gauge 100 dial -30 to 50 deg c , sw temp gauges , pilot operated solenoid valve sporlan 180s with24v dc coil , safety valve condenser , drain purge valve for condenser , charging valve , 3 way isolation valve for pressure gauges , bearing front nu216 , brush bracket assembly for 45 kw motor , fan , bearing rear nup 216 , feed thru capacitor for 45 kw motor , mccb merlin gerin 160 a , 4 pole ns160n 4p30640 coil 24v dc , integrated gate bipolar transistor mitsubishi 300a , 600v , capacitor ctr eqv 330 m f 400 v screw type , dc shunt meco 300a 75mv cl 05 i-type , dc voltmeter conzerv 0 to 500 v dm 3290 cl-1 96x96 sq mm , ac ammeter conzerv 0 to 300 a dm 3291 cl-1 96x96 sq mm , starter card elmot for 45 kw dc panel , field regulator circuit elmot for 45 kw dc panel , lamps self test card elmot , wiring diagrame plate elmot , set capacity regulator 24 v dc , compressor suction pressure switch , compressor discharge pressure switch , temperature switch danfoss rt7 -25 to 15 deg c , filter drier core , tachogenerator (hubner make) , piri terminal block (6way) , set start unloader 24 v dc , current transducer lem 200 a hal 200-s , dc contractor telemecanique 20a 4p lc1dt20bd coil 24v dc , control replay telemecanique 10a ca3kn22bd coil 24v dc , indicating lamp telemecanique 24v dc xb7ev04bpn red , indicating lamp telemecanique 24v dc xb7ev04bpn green , indicating lamp telemecanique 24v dc xb7ev04bpn amber , push button with no element telemecanique xb5aa42n green , push button with nc element telemecanique xb5aa31n red , emergency pb with nc element telemecanique xb5as542n red , starter fault reset pb with 2 no elements sb l and t 6a 250v red , lamp self test pb with 1 no element sb l and t 6a 250 green , hooter reset pb with 1 no element sb l&t 6a 250 red , on-delay timer siemens 5-100 sec coil 24v dc 3rp15 13-1ap30 , on-delay timer siemens 5-10 sec coil 24v dc 3rp15 11-1ap30 , slf fuse gilard 5 a , frc fuse gilard 2 a , terminal connectors with din rail 35 wago 2.5 sq mm 280-101 , terminal connectors with din rai

CTN :40974712

15 Jul, 2025 NA

Parganas - West Bengal

Tender For tender for supply of spring washer (p-22) , locking washer (plate no-7) , fibre washer , fibre washer , nut for adjusting rod (p-14) , sealinf ring for 14 & 19 , slotted nut (p-26) , rivet flat hd (p-07) , rivets , rivet flat head (p-14) , grease nipple (plate no-7) , lock nut (plate no-7) , cotter pin , pin for leve , link lever (ctlg fig-03) , clamp , copper washer , set screw (fig-i) , gasket exhaust manifold , key for coupling (plate no-4) , grease nipple (p-09) , locking wire (fig-i) , stud , union (p-04) , union , nut (p-15) , rock stud (plate no-7) , stud (fig-i) , stud (fig-i) , pin for die (plate no-7) , clutch spring , oil lubricator (plate no-4) , clutch opening die (plate no-7) , step bolt (p-16) , joint , water inlet manifold to cylinder head , joint end , drain plug (plate no-14) , joint , venturi to induction mainfold(ms-202) , drain plug , bonnet clips (plate no-2) , thrust washer (plate no-3) , stud cyl block , thrust washer (p-14) , cap , inlet and exhaust valve(ms-192) , joint exhaust manifold outlet flange(ms-196) , gland , fuel tap , die , heater switch (p-20) , hose connection , fixing pin (plate no-4) , spring for adjusting rod(p-14) , pad oil filter element(ms-175) , oil seal housing (plate no-4) , dust excluder (plate no-3) , fork operating spindle (plate no-7) , stud , gland for cock , fuel filter (p-21) , adjusting rod (p-14) , joint for hanger , pin for die & split pin , dog , spring inlet and exhaust valve outer(ms-190) , clamping stud with nut(fig-i) , locking nut (fig-i) , filter cap (plate no-14) , oil pressure gauge(p-20) , joint , outer clamping plate (plate no-10) , pin for pivot bracket(p-17) , driving belt , plate driving(facing in 3 segment) , belt water pump , pin for coupling (plate no-4) , oil pressure meter (plate no-14) , rubber coupling (plate no-4) , fulcrum pin (p-15) , bush for clutch plate (fig-i) , distance end piece (fig-i) , coupling block (plate no-4) , shim set (fig-i) , bearing (fig-i) , top bush (plate no-3) , ball brg , worm case cover (plate no-4) , sealed ball bearing , selector lever(p-15) , split universal coupling (plate no-4) , universal coupling (plate no-4) , flexible hose , bearing (plate no-4) , bush for clutch operator (fig-i) , collar assy (ctlg fig-03) , backrest(plate no-18) , bottom cushion (plate no-18) , side clutch operating (plate no-10) , clutch operating fork (plate no-7) , clutch lining set (fig-i) , reverse clutch plate (plate no-10) , forward clutch plate (plate no-10) , 2nd inter shaft (fig-h) , forward clutch plate assy , brake ferodo (p-14) , housing cover r.h for 3rd inner shaft , spindle for steering (plate no-4) , ferode lining , clutch lining , bevel wheel , bearing (fig-i) , bearing cover rh for 3rd inner shaft , coupling shaft , bearing (fig-i) , main bearing housing (fig-i) , driving disct , pinion 1st and 3rd speed (fig-h) , pinion 3rd & 4th speed(30 teeth(fig-h) , pivot (plate no-3) , brake strap assy , rear foot plate

CTN :40704355

07 Jul, 2025 NA

Srinagar - Jammu And Kashmir

Tender For bid to ras tender for supply of spring , lock nut m10 , bolt fluid passage , banjo 26 dia , tool box , assy fuel filter bracket , insul bush , assy return line dia 6/07 thk , gasket feed pump , cover fuel pump , cylinder pneumatic brake wheel , rectifier metallic , s/a fuel hose c.o.v return to rh tank re , feed pump repair kit(9441 037000) , manifold exhaust , s/a of brkt for guide pipe clamping , connecting rod bearing s2 (0.75) , kit air gauge hoses , outlet pipe , valve restrictor check , buckle 12.7mm , pump tyre foot lorry type , nipple grease button head 1/4bsp , box tin lamp filament size 102mm x 83mm , bearing ball journal single row 50mmx90m

Locking Nut Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Corporations/Associations/Others

Central Government/Public Sector

State Government

Central Government / Public Sector

Central Government And Public Sector

Co-operative