Latest locking nuts Tenders | Government locking nuts Tenders

Central Government / Public Sector

CTN :45737406

08 Jul, 2026 NA

Kazipet - Telangana

Tender For supply of set of spares for woodward governor of hhp diesel locomotives. set consists of 02 items as follows: 1) locking nuts to wood ward part no.12422, ww nut-3/4 32 jam, qty: 40 nos. 2) three terminal connector to woodward part no.1604-109, ww block-3 section terminal, qty: 10 nos. [ warranty period: 18 months after the date of delivery ] ]

Central Government And Public Sector

CTN :45616825

23 Jul, 2026 NA

Bhilai - Chhattisgarh

Tender For corrigendum : supply of repair kit for automatic pressure modification (apm-el-60) consisting of 15 items. one set consists of kbi pt no. as follows: (1) tube port plug with o ring 760837-1 no. (2) o ring 738362-1 no. (3) umbrella valve 772345-1 no. (4) o ring 756728- 1no. (5) o ring 783649- 1no. (6) o ring 781694-2 nos. (7) o ring (spl) 771637- 1 no. (8) o ring 749475- 1 no. (9) diaphagram-755749-1 no. (10) dustboot 772308- 1 no. (11) nut elastic stop 733883-2 nos. (12)ring gasket 772401- 1 no. (13)ring gasket781215-2 nos. (14) guide pin 771197 -1 no. (15) dust cap 776207-1 no. drg no. wd-08096-s- 1 alt.2,specification wd-23 - bmbs-2008 (rev.1) with amendt.1 of sept of 2016. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

CTN :45700286

15 Jul, 2026 NA

Ernakulam - Kerala

Tender For procurment of diving items - o-ring 10-pack, screw 10-pack, o-ring, 6.07x1.78, pu, nm&oc, 10x336900182, o-ring tool kit, nm, spring, anti rust tube, cylinder ring assy., pressure gauge assembly for regulator unit, protective cap, suit hose, low volume visor for diving mask/face mask for aga divator, face mask for diving mask for ag divator, guide disc, diaphragm holder, guide pin, locking spring, lever, sealing sleeve, connection nipple, centre spindle, lever spring, cover, mask body, relief valve spring, stop ring, washer, spring, hand wheel cover, nipple, webbing buckle, buckle,fixed part, piston, orifice, spring, safety disc, safety plug 300 bar, handle section, spacing washer, level support, guide buishing, valve cone, quick coupling connection, plug, cover, hose gasket, gasket, washer, valve housing diving, diviator mkii lebel, holder, nut, locking ring, retaining ring, spacer, locking ring, cylinder ring, o ring, o-ring 12,42x1,78, 10-pack, o-ring 10-pack, o-ring 10-pack, o-ring 10-pack, o-ring 3, 1 x 1, 6, 10-pack, o-ring 5-pack, screw 10-pack, screw 10-pack, screw 10-pack, nut 10-pack, screw 10-pack, screw 10-pack, washer, nut 10-pack, sealing plate 25-pack, protective cap 3-pack, pin 10-pack, pin 10-pack, gland seal 10-pack, non-return valve disc 10-pack, high pressure hose, positive pressure attachment, sealing piston assy., washer 10-pack, o ring, shoulder strap assy,right, shoulder strap assy,left, valve stem assembly, spacer 10-pack, o ring, low volume visor, strap lovk, screw, diaphram, head harness, connection nipple, lifting spindle, piston, piston 5-pack, antifreezing cap 5-pack, high pressure hose short, discharge plug (din) controlled, locking strap, 1 pcs, pad, mk4 regulator assy, breathing bag, mouthpiece assembly, relief valve, high pressure hose assembly, bracket, strap, screw, buckle, male 40mm, locking clip, fomlube, neck strap, dosage regulator, warning indicator, bellow arm, safety pressure unit, valve holder, locking ring, o-ring 18, 77 x 1, 78, bellows assembly, dosage manometer assembly, o-ring 52, 0 x 3, 0, bellows weight, assembly, pressure gauge assy, canister lid gasket, screw assembly, lower, buckle holder with buckles, long, elastic string, 1700mm, sealing tape, screw, 1 pcs, screw, 1 pcs

CTN :45644721

07 Jul, 2026 NA

Sundergarh - Odisha

Tender For supply of elastic stop nut(break foundation) as per drawing no. kgp/dl/nt-74 [ warranty period: 30 months after the date of delivery ] ]

CTN :45575833

06 Jul, 2026 NA

Varanasi - Uttar Pradesh

Tender For supply of high performance rail clamp (hprc) as per rdso lr. ct/ff/misc dt. 17/12/2024 of codiun/ robel suitable for the following fish plate drawings: 1) rdso/t-3714 60kg- 2) rdso/t-5916-60kg.) make/brand - codiun / robel (warranty period : upto 18 months from the date of delivery.) (rdso approved firms only as per rdso ltr. ct/ff/misc dt. 17/12/2024) with self locking nuts and suitable wrench) [ warranty period: 18 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45561297

27 Jul, 2026 NA

Valsad - Gujarat

Tender For manufacturing and supply of single piece reusable self locking spring inserted nut suitable form-25 lock bolt, pitch 3 mm, dimensions hn: 22 mm, bn: 38.0 mm, cn: 43.5 mm, ln: 37 mm, sn: 38 mm, complete with corrosion resistant coating by electro galvanizing/hot dip galvanizing/nickel alloy coating or equivalent, conforming to rdso generic specification for self-locking nuts, suitable for railway track fittings.[ warranty period: 72 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45550736

25 Jun, 2026 NA

Ernakulam - Kerala

Tender For supply of a set of fasteners consisting of: - 1) ht hexagonal bolt to size m20x2.5mm pitch x 200mm long with threaded length of 70 +/- 5mm to property class 10.9 and is:1364: - 01 no. 2) hexagonal head elastic stop nut suitable for the above bolt (m20x2.5mm pitch) to property class 8 confirming to is:1367: - 01 no. 3) suitable spring washer confirming to is:3063: - 01 no. 4) suitable 3mm thick plain washer confirming to is:2016(table 1): - 01 no. [ warranty period: 30 months after the date of delivery ] ]

CTN :45252333

16 Jun, 2026 NA

Visakhapatnam - Andhra Pradesh

Tender For corrigendum : tender for supply of t/c speed sensor , flange with coupling , cross piece , male plug , oil pump casing , oil pump special nut , plug , flange , tightening ring , cover , alu shim , return line to cr case , pipe clamp , elastic mountings tsc t140/70 d , gasket , o-ring , o ring-an33 nse6.5 21a7 , fuel feed pump- cw engine , limit switch box , rubber compensating sleeve dn40 pn16 lf130 , rubber compensating sleeve dn80 pn16 lf130 , pipe , temperature sensor , turbocharger speed tranmitter , sleeve flexmaster gm10006-20 nbr , tab washer dn 12 , gasket , piston ring , o- ring , gasket , equipped cylinder head , o ring 15x204 viton (20209) , o ring 5x589 viton (20312) , peak pressure indicator , spherical bearing ge505w , inlet thermostatic valve , fw level switch , immersion heater , over speed solenoid valve , pressure gauge , spring washer packing , sealing ring , hex headed screw , hex headed screw , locking plate , cap nut , main bearing assly , bearing , eccentric shaft , gov driving gear pinion , ball bearing box , pair of bevel gears , bevel pinion , shim , safety valve in oil cct assly , water outlet part , duct , bs ring , joint , o ring no 87 21a7 , flexmast coupl(pipe-88.9mm-o.d) , joint , joint dn 150 , bolt m16x110l 8.8 with 2mm loc , injector pump pin , locking bolt m14-60 29 u 10.9 , water pump pinion , oil seal , internal circlip , shim , mech.seal for balmo f.f.pump , seal-balmo fuel feed pump , flexmast conn gm10006-038 (38 od) , flow switch for l.o. priming safe , joint press seal(p.18) 26x18 , safety valve , gasket , set of gasket for filter+hyd , set of full flow filtering elements , servo booster for pga 12 governor , temp sensor exhaust , fuel feed pump-ccw engine , set of oil seal 19x30x7 for aroto g15sp(ffp) , fuel feed pump-aroto-g15sp-fr ccw eng , drive rotor , driven rotor , packing at both end , mechanical seal , 25 pin socket insert plug jaeger , injector assembly , sleeve dn80 pn16 , lub oil thermostatic valve range 63/71 deg c , thermostat element , shim injection pump , o ring , expansion bellow , air staring vale , hose pipe mod 16 sae 100r5 l 220mm , flexible hose , rubber compensating sleeve dn65 pn16 lf 130 , ruber compensating sleeve dn150 pn16 lf130 , air distributor , loctite 648 , fuel clogging indicatior , sensor ref 19127sc , sensor ref 1950sc , switch for manual stop-xck-j265 , proximite detector mod 9984-2102 , breaker switch type zckj2 , starting air valve , 2 way pneumatic valve , o ring , disc spring dia 25xdia 12.5x1.5 , inner star for tacoma opvs , duplex fuel filter , filter element for 2-stage marin engine , injector calibration pump , temperature regulating pn40dn100 , pneumatic stop valve , pressure regulating valve , pressure switch , thermometer 0-100 , temp.sensor mbt4-s-90-m18x1.5-ef3 , thermostat element for naval opv , seal kit , circulation heater element for ktmi opv , thermostat for circulation heater for ktmi opv , fuel filter element for filter type-20251261751032 , over speed air lowpresure switch raing bar , l o p gear , non return valve , screw plug , packing perform , hydropneumatic pump with hoses , stud , circlip external-65mm , circlip external 90 mm , core plug hex.head 1/2 , rocker arm equipped , contact (aux) , o , ring , cup plug , exhaust gasket , anode , thermometric duct , inner star

Central Government And Public Sector

CTN :45453154

30 Jun, 2026 NA

Bilaspur - Chhattisgarh

Tender For provision of self locking nuts in h-beam sleepers under the jurisdiction of senior divisional engineer north of bilaspur division.

Central Government/Public Sector

CTN :45424819

25 Jun, 2026 NA

Ernakulam - Kerala

Tender For supply of hex.hd.bolt 1- 8 tpi(unc) x 4 1/2"long to dlw drg no.2p11629 alt.r3 with elastic stopnut (nyloc) for b.g.buffers.material specn:-bs:1768 gr.v,thread fit to bs:1580 (for bolt) aisi-1010 or aisi-1015 or aisi-10b21(for elastic stop nut). [ warranty period: 30 months after the date of delivery ] ]

Locking Nuts Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government / Public Sector

Central Government And Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government And Public Sector

Central Government/Public Sector