Get complete information related to latest Loctite Bearing Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Loctite Bearing Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Loctite Bearing Tenders.
Tender For supply, installation, testing and commissioning of electrical and mechanical equipments for shallow bore tube wells phatak bans,sawar khan, chatta mom gran, lal darwaza in matia mahal constituency ac-21. - s/o submersible pump set fitted with dynamically balanced ep impeller mounted on stainless steel shaft protection sleeve ep stage bowl of closed grained shorted type impeller. the pump will be directly coupled to required wet type induction motor of speed 2900 rpm suitable for operation on three phase ac, 415 volts ,50hz, 5 hp, model no j46, head-70 mtrs, discharge-200 lpm. make:bs/ksb/crompton/djb approved, supply of automatic lt panel board suitable for 415 volts, 3 phase, 50 hz, 4 wire system for operation of up to 15 hp submersible set, made out of not less than 2 mm thick crca for load bearing members and 1.6 mm for doors of panel, totally enclosed, dust and vermin proof, floor mounted type. the panel size 760 mmx 1360 mm x300 mm and having (1) 63 amp change over- 1 no (2) 63 a tpn mccb -1 no (3) amp meter 0-50 a- 1 no (4) voltmeter 1 no (5) amp & volt meter selector switches-1 set (6) auto-manual + light + control mcb tp 32 amp- 1nos each (7) ct -3nos (8) push button + on/off light 2 nos each (9) 5 kvar shunt capacitor- 1 no (10) aluminium bus bar size 25 mm x 6 mm - 1set (11) 15 hp star delta starter (a) 32 amp power contactor-3 nos (b) overload relay 14-23 a -1 no (c) star delta timer- 1 no ( d) qt timer -24 hours -1 no (e) motor protection relay 200 short circuit, earth fault, phase loss, unbalance, phase reversal, locked rotor protection make:-subtec/protech/ l&t/all djb approved make, s/o pvc insulated flat submersible cable with copper conductor having three core size 2.5 sq mm 1100 volts(100mtr per roll). make- gloster/universal/havells/grandlay/djb approved, s/o g.i pipe 40mm dia medium class with threaded externally on both end socketed 6mtr long. make- jindal/tata., s/o g.i tail piece 40mm dia 600mm long medium class with threaded externally on both end. make- tata/jindal, s/o gi socket 40 mm dia with threaded internally. make: jindal/tata/djb approved, s/o gi elbow with both end having thread, size- 40mm. make: jindal/tata/djb approved, s/o gi reducer having thread on boyh end, size: 50mm to 40mm. make: jindal/tata/djb approved, s/o gi union having thread on both end, size: 40mm. make: jindal/tata/djb approved, s/o ms clamp of 600mm long 12mm thick complete with nut & bolts and washers for holding 40 mm dia pipe i/c bending & shaping etc., supply of ms bore cover 6 mm thick suitable for 100 mm dia casing in 2 pieces complete with bolting arrangement angle iron frame and provision of 40 mm dia hole in the center., supply of pvc suction hose pipe 50 mm dia 30 mtr long.make-jyoti/isi, installation of submersible pump set with pipe and other accessories, connection of cable, installation of electric panel, grouting of electric panel digging and fixing the same with the help of cc and laying of gi pipe from bore to panel executing minor civil making electrical connection with cable as required size i/c watch and ward cartage, taking all safety measures all tools and tackles. testing and commissioning of all e&m equipment on no load and full load conditions as per standard and full satisfaction of engineer-in- charge. this is a turnkey job and it further includes any left out items which may be required during execution of work will be firm responsibility & no extra payment will be paid. - s/o submersible pump set fitted with dynamically balanced ep impeller mounted on stainless steel shaft protection sleeve ep stage bowl of closed grained shorted type impeller. the pump will be directly coupled to required wet type induction motor of speed 2900 rpm suitable for operation on three phase ac, 415 volts ,50hz, 5 hp, model no j46, head-70 mtrs, discharge-200 lpm. make:bs/ksb/crompton/djb approved, supply of automatic lt panel board suitable for 415 volts, 3 phase, 50 hz, 4 wire system for opera
Tender For corrigendum : procurement of spares of pembril make fluid coupling model 23scr25b of ash slurry pump for ph- ii and model 41scr 24x for ph i and ii at sgtps, birsinghpur - spares for pembril make fluid coupling (model-23scr25b) of ash slurry pump for ph-ii, input shaft, scoop housing bracket, shaft, bearing cover, bearing nut, bearing liner, set bolt, locking washer, shaft ring, if fitted, self locking nut, casing plug for cover plate, oil retaining ring, locking washer part no.56, locking washer part no. 60, scoop housing shroud, counter sunk screw, self locking nut, key woodruff, circlip, end cover, circlip external, circlip internal, scoop housing assembly, impeller, joint collector ring impeller, bonded seal part no. 196, bonded seal part no. 182f, vent tube, connecting tube, leak of nozzel, joint scoop housing bracket, feed tube, pillow block, runner baffle, set bolt, self alinging bearing, spring if (fitted), scoop pin, dowel, runner, end cover, bearing liner, spares of pembril make fluid coupling (model: 41scr-24x) for ph-i&ii, operating rod, operating lever, joint centre spigot, control lever, woodruff key, bearing liner(23124), bearing liner (nu 228), scoop housing assembly, scoop tube assembly, feed tube, leak of nozzle set, centre spigot, shaft, bearing nut, bolt for multi disc unit, self locking nut, vent tube, locking washer/star washer, allen screw for liner, .
Tender For supply of bearing housing for crd booster pump part no-350 , bearing bush for crd booster pump part no-545.4 , adapter for crd booster pump part no-145 , impeller ring-suction impeller for crd booster pump part no-503.1 , spacer sleeve for crd booster pump part no-521 , split ring for crd booster pump part no-501 , bearing sleeve for crd booster pump part no-529.4 , bearing sleeve for crd booster pump part no-529.2 , bearing sleeve for crd booster pump part no-529.1 , pump shaft with keys ofr crd booster pump part no-211 , bearing bush for crd booster pump part no-545.1 , wearing ring-casing-diffuser-stage for crd booster pump part no-502.2 , bearing bush for crd booster pump part no-545.2 , wearing ring-casing-diffuser- suction for crd booster pump part no. 502.1 , bearing cover for crd booster pump part no-360 , withdrawal nut for crd booster pump part no-923 , centering sleeve for crd booster pump part no-526 , oil level tube for crd booster pump part no-641 , constant level oiler for crd booster pump part no-638 , set of gasket and o-rings for crd booster pump , set of fasteners for crd booster pump , impeller ring-stage impeller for crd booster pump part no- 503.2
Tender For supply of major service kit for main bearing , major.kit conv nbr,nx400 or 900 , tube plug with ribs diameter 10 x3.5 x14.5,gl10 , plug , screw plug for 2.5knm gearbo x 1900 , ring, nx900 , v-belt pulley, 4grooves, diameter dm equal 400 , washer for m20t or bolt is1367-6 zn plated , hexagon nut,nv30 m20, a4-80