Latest logic controller scrap Tenders | Government logic controller scrap Tenders

State Government

CTN :41333626

29 Aug, 2025 2.18 Crore

Udaipur - Rajasthan

Tender For corrigendum : purchase of various testing major apparatus (lab equipment) in quality control labs under zone ajmer, bikaner,udaipur-i and udaipur-ii - fully automatic servo controlled compression testing machine (ctm)-3000 kn capacity with additional load frame of 500 kn capacity & flexure frame of 100 kn capacity:- supplying, fixing and commissioning of fully automatic servo controlled compression testing machine (ctm) of 3000 kn capacity which should be capable of conducting compression test on concrete & mortar specimens and allied products as per is : 516 & is :4031 (part-6). the machine should be power operated with servo controlled motor capable to apply the load continuous by without shock and there shall be large enough space provided for test specimen to accommodate in a readable position. machine shall have good load control and capable of applying the load at the specified rate, uniformly with automatic control with percentage of error for load shall not exceed + 1.0% of the indicated load. the system shall have an arrangement for automatic placing system, which achieved by the combination of advance hydraulic and electronic system. the systems can be loaded in load, displacement or strain control basis. complete machine unit shall conform to is: 14858-2000 and is: 9399-1979 and as per direction of engineer in charge. the salient features and technical specification of the machine shall be as under :- i) ctm-3000 kn machine loading frame - four column high stiffness welded from with enough stabiility . - heavy duty mechanical platens with spherical seated block (vicker hardness > 550), bottom bearing, blocks, auxiliary plates (vh > 550) shall have flatness tolerance within 0.03 mm and squareness and parallelism tolerance within 0.06 mm wide.- base shall have fine finished servo controlled hydraulic cylinder with hardened and finest abraded piston. - frame with safety guard door and transparent fragment guard (both front & rear) (ii) hydraulic pumping system, it should be compact in design and suitable for the supply of required flow and pressure for the movement of the actuactor. it shall have oil tank of adequate capcity vane type pump powered by three phase motor. anti vibration mounting shall provided as standard along with the hps.iii) micro-processed (plc & hmi) based touch panel display & control system user friendly interface control system with application software shall provide the digital servo control, precise operation, ramp generation for the machine, data acquisition, storage, processing, analyzing and reporting etc for the continuous operation of the system.iv) technical specification of ctm (3000 kn) capacity -3000 kn, platen size 320 mm dia, ram dia 260 mm, ram travel 50 mm, vertical daylight clearance 350 mm, horizontal daylight clearance 370 mm, least count - 0.1 kn, pace rate controlling -1%, rate of loading 1.3 mm/min (when running idle), 0.14 to 032 mpa/sec (with specimen), motor capacity 3 hp (min), power supply (240v, 50-60hg, three phase.), capacity of oil tank 20 litre, max. operating pressure 210- 600 bars, flow of pump 2 & 4 lpm (duel speed) , auto stop & release of pressure when specimen failure, multi operation compression test up to 3000kn, up to 500 kn range and flexure test, accessories spacers- 4nos, controller unit auto pid operation with closed loop update rate of 10 khz to control pace rate automatically as programmed. start, stop & hold test system, load control 01kn/sec to 50 kn/sec., displacement control 0.01 mm/sec to 1mm/sec. load indication & control coloured touch screen display of suitable size, test report facility to print test report, export data to ms excel. auto internal calibration without proving ring, short circling protection overload safety cut off, piston over travel safety cut off- shall be made in addition to 3 kva 3 ph servo control stabilizer, technical specification of ctm (500 kn) load frame- capacity 500 kn, platen

State Government

CTN :40985783

25 Aug, 2025 1.50 Crore

Mohali - Punjab

Tender For corrigendum : purchase of sports exercise physiology lap equipments - cardiopulmonary exercise testing system system should be compact can be used in laboratory operation and low maintenance costs and easy servicing. system should be state of the art computerized telemetry breath test analyzer for on-line breath by breath measurement of exercise test of respiratory system to measure following parameter: time, ve, bf(rr), hr, feo2, feco2, peo2, peco2, vo2, vco2, ve/vco2(eqco2), ve/vo2(eqo2), rq(rer), vd/vt, vo2/kg, vo2/kg/hr, met, watt(work), hr, ttot, ti, te, ti/te, ti/ttot, pef, pif, br, vet, sum, tv/te, o2 kinetics, oxygen deficit, oxygen debt parameters and indirect calorimetric. wireless hr recording system, indirect cardiac output by wassermann algorithm system should comply ats and ers guide line and it should be ce certified., iso certified system should have automatic ambient conditions measuring system. system should work under temperature range 0 to 50 celsius. system should have facility for automatic calibration of analyzers. volume transducer calibration with precision calibration syringe. system should meet following technical specification flow rate measurement: measuring headpiece should be either through turbine /dvt/ pneumotach and dead space less then 40 ml, it should not be affected by humidity , flow range +/- 18 l/s and accuracy 2% oxygen analyser : should be either electrochemicalcell/paramagnetic and measurement range 0- 100 %,response time t90 100 ms and accuracy +/-0,04 % and- resolution 0,02 %carbon dioxide analyser : should be ndir (infraredabsorption) and measurement range 0 - 10 %,-response time t90 90 ms , accuracy +/- 0,04 %, andresolution 0,02 % software should support latest windows or latest andin corporate customized predicted normal equations.software should be capable of changing graphics displays during real time testing. system should have facility for automatic treadmill or bicycle ergo meter control. should be supplied with software, standard accessories for operation manual carrying case for field use. system should be supplied with latest data acquisition system, deskjet printer and ups. system should comply en iso 13485:2003, en iso 9001:2000, ec certificate93/42/eec, programmable treadmill running machine with user terminal (display &keyboard) stand- alone and remote control via rs232 running surface: l:170 cm (minimum), w: 65 cm (minimum) maximum possible load: 200 kg (440 lbs) speed range: 0-40 km/h elevation: 25% (14 maximum elevation) motorized adjustment, reverse belt rotation. motor system 3.3 kw, single phase ac motor, maintenance free and brushless power transmission: frequency inverter, poly v- belt, very quiet operation safety system: emergency-off safety stop switch (safety lanyard with actuator, pull cord and clip); potential equalization bolt; transformer for potential-isolation from the mains ambient condition: temperature: +10to +40 degrees c, humidity 30 to 70% display (resolution): lcd display heartrate monitoring: wireless transmitter; the treadmill should be able to interface with well-known compatible metabolic gas analyzer as per standard and custom exercise protocols different programs safety harness-1. indispensable accessory for stress testing, accident prevention and for the general safety of athletes.2. safety arch with different heights and widths to fit all running machines.3. an emergency stop at the crossbar of the safety arch allows automatic stop of the running belt in the moment a fall occurs.4. the harness and chest belt (available in 5 sizes: xxs, s, m, l, xl) secure the subject and prevents falling over to the front.5. chest belt straps do not pinch or restrict the athlete", programmable ergometer functional design and excellent stability, load up to 160kg. easy to use saddle, handle bar and pedals speed independent and dependent power control handle bars are easy to change to suit different tests, rotatable by 360 degrees. mechanical/motor-a

CTN :41362929

28 Aug, 2025 18.33 Lacs

Nagpur - Maharashtra

Tender For providing of custom bid for services - installation of cutting edge industry 4 (point) 0 solution for real time data acquisition and analytics for critical machines of shell machine shop as per scop of work annexure a

Central Government/Public Sector

CTN :41330287

26 Aug, 2025 NA

Ratlam - Madhya Pradesh

Tender For tender for supply of supply installation and commissioning ofcomputerized (automated) distributor valve(dv) endurance test bench ( for all make) withdigital pressure gauge and timers and pcbased data acquisition system as perannexure-a and drawing no.- g/sd 8-260attached , supply of otdr suitable for 1310/1550 nm fiberwith are solution of 60 cm / better, dynamic range of35/32db or better with all accessories, ac adopter/charger, rechargeable battery manual, hard and softcarrying case,complient with tec specificationno.etc. gr/tx/otd-01/04 apr-2010 with latestamendments with all accessories (vfl facility,internal memory, usb/ ethernet facility, compatiblewith fc, sc, lc, etc. (make yokogawa aq121,fujikura, sumitomo) , supply of remote alarm units forgeneration of alarm at station as per thebattery health monitoring unit , "supply of ofc splicing machine. makefujikuraisumitomo/ mophorn/stanlay/fittel asper specification." , expandable polyurthane foam spray of capacity750ml(minimum). make-loctite, abro, pidilitezorrik, gree r9, essrbond or similar , air compressor elgi model no: trc2507 suitable asper elgi part no s07050 for 1400 hp demu/dpcmake/brand: elgi , cec. , "supply of 2 kva ups 160-260v, single phase, 50hz,spwm true on line double conversion ups withigbt module based inveners having transient surgeprotection,monitoring by lcd display of l/p & o/pvoltage/current & battery voltage charging anddischarging, battery with ms stand of" ,

CTN :41344106

27 Aug, 2025 18.33 Lacs

Nagpur - Maharashtra

Tender For providing of custom bid for services - installation of cutting edge industry 4 (point) 0 solution for real time data acquisition and analytics for critical machines of shell machine shop as per scop of work annexure a