Latest lorrie Tenders | Government lorrie Tenders

Co-operative

CTN :45715039

09 Jul, 2026 NA

Kawardha - Chhattisgarh

Tender For tender engineering section(only oem & authorized dealer - fabrication & modification work during the season and off season. machinery repairing work of cane carrier, fibrizar, rotory filter, all mills, bagasse carrier, return bagasse carrier, boiler accessories, all boiling house machinery, molasses storage tank and etp to be done. machinery shut down work to be attended on top priority, maintenance work of cseb power plant is also required to be attendes. terms and conditions:- 1. service provider should have sugar industry exprienced personal team of highly skilled(1no.), skilled (2nos.), semi skilled (2nos.), khalashi (2nos.), un-skilled (2nos.) with one technical supervisor. 2. boarding will be provided by factory at factory site. 3. lodging will by arranged by the contractor. 4. contractor will be full responsible for safety of their emplotees and shall take in all steps required under the factor act or other wise as per direction given technical staff of factory. 5. contractor will be registered under gst. 6. minimum 5 year experience in same job. 7. submit your offer with details of technical team on per month basis for a minimum period of 1 year & no extension will be consider.

CTN :45716965

13 Jul, 2026 3.27 Lacs

Saharanpur - Uttar Pradesh

Tender For tender for remove the worn out runners from the main bagasse carrier bagasse elevator and return bagasse carrier errect 8x65 10x50 mm flat iron bars in their place clean the welded areas using a grinder , cut and remove the worn out bottom plates of the main bagasse carrier bagasse elevator and return bagasse carrier errect new 6 8 10 mm , cut and remove the worn out side plates of the main bagasse carrier bagasse elevator and return bagasse carrier errect 6 8 10 mm plates satisfactory trial run , cut out and remove the damaged and weak sections of the main bagasse carrier fabricate and errect a new assembly including the gear shaft system using the supplied plate , cut out and remove the weak and corroded sections of the bagasse feeding chutes errected boilers fabricate and replacements using the provided plates and repair the associated shafts and gears , the casings of the boiler id and fd fans have become severely weakened and damaged the task involves cutting away and removing the weakened sections fabricating , cut and remove the deteriorated side bottom and top plates surrounding the air heater of boiler no. 3 fabricate and errect new plates using the specified 6 8 mm plate in their original positions , fully strengthen the air heater plates and conduct a satisfactory trial. , dismantling the old air heater tubes of boiler no. 01 size 63.5 mm od x 2.64 mm thickness fabricating and errecting new tubes in accordance with the drawing , dismantling the old air heater tubes of boiler no. 02 size 63.5 mm od x 2.64 mm thickness fabricating and errecting new tubes in accordance with the drawing , dismantling the old air heater tubes of boiler no. 03 size 63.5 mm od x 2.64 mm thickness fabricating and errecting new tubes in accordance with the drawing , a. dismantling old columns beam channels etc. b. manufacturing and installing new columns beam channels , installing 16 inch 18 inch manholes with blinds , constructing a bed for the pump fitting the pump and motor and conducting a trial run of up to twenty hp , dismantling fabricating and erecting weak corroded pipe lines up to 12 and providing satisfactory leak proof trials. , dismantling fabricating and erecting weak corroded tees up to 12 and providing satisfactory leak proof trials. , dismantling fabricating and erecting weak corroded nipples up to 12 and providing satisfactory leak proof trials. , dismantling fabricating and erecting a weak throated cross member up to 12 and providing satisfactory leak proof trials. , dismantling fabricating and erecting a weak throated band up to 12 and providing satisfactory leak proof trials. , dismantling fabricating and erecting a weak throated flange up to 12 and providing satisfactory leak proof trials. , dismantling fabricating and erecting a weak sloping reducer up to 12 and providing a satisfactory leak proof trial. , removing the old corroded platform and replacing it with a new one

CTN :45717445

09 Jul, 2026 NA

Kheri - Uttar Pradesh

Tender For providing of manpower outsourcing services - fixed remuneration - others; mali; middle school,manpower outsourcing services - fixed remuneration - others; store boy; high school,manpower outsourcing services - fixed remuneration - others; lab boy; high school,manpower outsourcing services - fixed remuneration - others; ph recorder juice heater att juice sulphiter mete syrup salphitation mete centrifugale opp; high school,manpower outsourcing services - fixed remuneration - others; coock; middle school,manpower outsourcing services - fixed remuneration - others; fireman waterman feed pump att civil masion boiler; 2 class boiler certificate,manpower outsourcing services - fixed remuneration - others; truck tripler auxalery carrier tubewell operator welder; iti,manpower outsourcing services - fixed remuneration - others; cane carrier operator; middle school,manpower outsourcing services - fixed remuneration - others; bagasse carrier operator; middle school,manpower outsourcing services - fixed remuneration - others; hammerm

CTN :45704070

14 Jul, 2026 NA

Saharanpur - Uttar Pradesh

Tender For providing of custom bid for services - removal of sugarcane fallen from the cane carrier and placing it back onto the carrier chain similarly collection of bagasse fallen from the rake carrier and feeding it back into the chain along with cleaning of the surround..

Corporations And Associations And Others

CTN :45488872

06 Jul, 2026 NA

Jalandhar - Punjab

Tender For corrigendum : supply of chain and chain spares - csm bhogpur, bagasse elevator chain & its spares, chain with case hardened, m.s roller, bush and pins for baggase elevator chain having attachment link at every 4th link., pitch 150 mm, side link as per drg. no.ce/mh/504 with test certificate from approved lab, bush as per drg no. ce/mh/504, roller as per drg no. ce/mh/504, pin as per drg.no ce/mh/504, outer link pin cut type as per drg.no. ce/mh/504, outer link pin size hole as per drg.no. ce/mh/504, inner link bush type (both sides) as per drg.no. ce/mh/504, side attachment link as per drg.no. ce/mh/504, cane carrier chain & its spares, cane carrier chain pitch -150mm complete with pin ,bush and rollers case hardening and assembled with test certificate from approved lab as per drg.no.mh pcc r1, pin as per drawing no. . mh pcc r1, bush as per drawing no. . mh pcc r1, roller as per drawing no. . mh pcc r1, outer link r.h as per drawing no. mh pcc r1, outer link l.h as per drawing no. mh pcc r1, inner link r.h & l.h as per drawing no. mh pcc r1, cane carrier slates as per drg no. mh-517, inter-rack carrier chain& its spares, inter rack carrier chain pitch -229mm complete with pin ,bush and rollers case hardening and assembled with test certificate from approved lab as per drg.no. ce/mh/503, bush as per drg. no. ce/mh/503, pin as per drg no. ce/mh/503, inner link l.h & r.h as per drg.no. ce/mh/503, outer link l.h without attachment as per drg.no. ce/mh/503, side attachment link (outer link l.h) as per drg.no. ce/mh/503, secondary carrier chain & its spares, secondary carrier chain pitch -229mm complete with pin ,bush and rollers case hardening and assembled with test certificate from approved lab as per drg.no. ce/mh/503, bush as per drg. no. ce/mh/503, pin as per drg no. ce/mh/503, inner link l.h & r.h as per drg.no. ce/mh/503, outer link l.h without attachment as per drg.no. ce/mh/503, side attachment link (outer link l.h) as per drg.no. ce/mh/503, csm nawanshahr, supply of secondary carrier chain spares as per drg. no. 183 r3material of side link en 45pin & bush 16ni3cr2/isi57 part 4/1988roller is- 226- 1975hardness = pin 50 5 hrc bush 40 5 hrc roller 30 5 hrcbreaking load = 60 ton, supply of cane carrier chain and spares as per drg. no. 216 r3material of side link 55c8/is 1875:1978pin & bush 16ni3cr2/isi57 part 4/1988roller is- 226- 1975hardness = pin 50 5hrc bush 40 5 hrc roller 30 5 hrcbreaking load = 40 ton, side link (fig no. 1), side link (fig no. 2), side link (fig. no. 3), roller (fig no. 4), pin (fig no. 5), bush (fig no. 6), slats (fig no. m- 316r), supply of rbc chains as per drg. no. m- 263rmaterial of side link 55c8/is 1875:1978pin & bush 16ni3cr2/isi57 part 4/1988roller - is 226-1975hardness = pin 50 + 5 hrc bush 40 + 5 hrc roller 30 + 5 hrcbreaking load = 60 tonsupply of spares for r.b.c. chain as per drg. no. m-263 r1, side link for bush (fig no. 1), side link (round hole) ( fig no. 2), side link (one side cut hole) (fig no. 3), side link for attachment ( fig no. 3 a), attachment no. m 111r2, roller (fig no. 4), bush (fig no. 5), pin (fig no. 6), rake (grill type) as per drg. m-111r3, pin for rake as per drg m-111r4, supply of forged link chain 229 mm pitch as per drg. no. m-305specification:material of forged block - en 30 bmaterial of pin & bush - 16ni3cr2pin hardness - 50 5hrcbush hardness - 40 5hrcbreaking load - 70 ton, csm batala, pin for rbc as per drawing no. bcsm/mh/01, bush for rbc as per drawing no. bcsm/mh/01, roller for rbc as per drawing no. bcsm/mh/01, pin for mbc as per drawing no. bcsm/mh/01, bush for mbc as per drawing no. bcsm/mh/01, roller for mbc as per drawing no. bcsm/mh/01, pin for elevator as per drawing no. bcsm/mh/01, bush for elevator as per drawing no. bcsm/mh/01, roller for elevator as per drawing no. bcsm/mh/01, pin for cane carrier as per drawing no. bcsm/mh/01, bush for cane carrier as per drawing no. bcsm/mh/01, roller for cane carrie

CTN :45694850

14 Jul, 2026 NA

Saharanpur - Uttar Pradesh

Tender For providing of custom bid for services - spreading and drying the last years loose bagasse near the rbc of the boiler for use in the boiler and bringing it to the rbc from own resources and feeding it in the rbc for slow firing feeding loose bagasse for slow firing..,custom bid for services - spreading and drying the last years loose bagasse near the rbc of the boiler for use in the boiler and bringing it to the rbc from own resources and feeding it in the rbc for slow firing feeding loose bagasse for slow firing..,custom bid for services - for the crushing season 2026 27 the bagasse coming out of the bagasse carrier and the excess bagasse collected below the bagasse carrier should be collected in the bagasse yard and back feeding should be done as per require..,custom bid for services - for the crushing season 2026 27 the bagasse coming out of the bagasse carrier and the excess bagasse collected below the bagasse carrier should be collected in the bagasse yard and back feeding should be done as per require..

CTN :45666916

03 Jul, 2026 NA

Ambala - Haryana

Tender For supply of bagasse and cane carrier chains, spares and slates 150mm pitch bagasse carrier chain, 229 mm pitch forged block type chain, 150 mm pitch cane carrier chain

CTN :45672362

10 Jul, 2026 16.57 Lacs

Muzaffarnagar - Uttar Pradesh

Tender For erection and fabrication work a c c - mill mein lage scraper hetu discharge chute ke jo bhag kamzor evam kat gaye hain. unhe kaatkar hatana tatha nai 12 mm ki plate se taiyar kar punah sthapit karna. sath hi scraper ko baandhne hetu profile ke anusar hole wali plate lagakar/welding karke fix karna evam karya poorn hone ke pashchat trial dena. , cane carrier ke gale/ghise runner base ko kaat kar hatana. 100 mm ke channel se box banakar runner base ko lagana evam fit karna va purane channel ko nikal kar seedha karke palat kar lagana. , cane unloader ke purane ghise/kate 40/50 mm size ke sq. bar ko kaat kar hatana tatha yathasthan poorv ki bhanti naye sq. bar ko lagana evam santoshjanak trial dena. , cane carrier/rake carrier/bagasse elevator/r.b.c. ke ghise/kate runner ko kaatkar hatana. uske sthan par purane ko palat kar athva naye runner ko poorvanusar lagana. , cane carrier/rake carrier/r.b.c. ityadi chains ke side ki kati/ghisi/kamzor plate ko kaatkar hatana. uske sthan par purani athva nai plate ko lagana. , fibrizer hood ki side ki ghisi/kamzor plates ko kaatkar nikalna tatha yathasthan nai plate ko lagakar andar va bahar se welding kar santoshjanak trial dena. , bagasse baling machine ki sampoorn overhauling. testing evam trial dena. , s.r.c./i.r.c. ki purani racks ki vanchhit marammat karna. , bagasse elevator/r.b.c. ki chains ki nai racks sample anusar taiyar karna. , t.r.p.f. ke gale/kamzor bottom/top cover ko badalne ke liye naye cover poorvanusar banakar lagana evam santoshjanak trial dena. , s.r.c./i.r.c. ke gale/kamzor tail end boots ko kaatkar hatana tatha sample anusar 8.0/10.0 mm moti purani/nai plate se taiyar kar lagana evam leak.proof welding kar santoshjanak trial dena. , cane unloaders ke panjon ke vibhinn parts ko dismantle karna. dismantle kiye gaye grabs ke sabhi parts ki vanchhit marammat karna. fingers par nirdeshanusar hardfacing kar panjon ka punah assembly karna. , mills ke compound imbibition hetu lagi juice tray mein se gali/kamzor juice tray ko kaatkar hatana. nai plate se sample anusar taiyar kar yathasthan lagana evam samast connection karna. , cane carrier/s.r.c./i.r.c. tatha bagasse elevator chains ko upar uthne se rokne ke liye lagi hui guides mein se ghisi/kamzor guides ko kaatkar hatana. nirdeshanusar nai guide taiyar kar yathasthan lagakar santoshjanak trial dena. , cane unloaders ke bridge/trolley drive ke ghise/kate wheels ko nirdeshanusar welding karna. , t.r.p.f. ke gale/kamzor donali chutes ko kaatkar hatana tatha purane anusar naye donali chute fabricate kar yathasthan erection karna. , cane carrier ke liye lagi idler wheel par nirdeshanusar m.s. ke ring fabricate kar lagana. , mill head stock evam t.r.p.f. head stock ke beech nirdeshanusar 25.0 mm plate se support banakar lagana. , fibrizer ke purane hammer shanks ko nirdeshanusar welding evam hardfacing kar marammat karna evam balance karna. , cane chopper/leveller ke gale hue/kamzor hoods ko kaatkar hatana tatha nai plate se naya folding type banakar lagana. , fibrizer ke pocketed type anvil plate ki pockets ki tooti plates ko nai plates se badalna. mudi hui plates ko seedha karna tatha welding kar taiyar karke nirdeshanusar hardfacing karna. , cane leveller/chopper ke rotor assembly ki ghisi hubbo ke working side evam top sides ko welding kar samatal karna evam nirdeshanusar hardfacing karna. , cane unloaders par lage reduction gear evam motors ke kamzor beds ko kaatkar naye modify karke naye bed banakar lagana tatha gear evam motor ka alignment kar trial dena. , cane carrier ki structure ke gale/kamzor columns ko nirdeshanusar plate lagakar welding kar majbooti pradan karna. , mill rollers mein sample anusar juice ring fabricate kar fit karna. , t.r.p.f. evam mill ke beech mein lage pressure chutes ki vanchhit marammat karna. , mills ke gale/kamzor juice receiving tank ko kaatkar hatana. 8.0/10.0 mm moti plate se sample anusar tank fabricate kar yathasthan fit karna evam samast connection kar leak.proof trial dena. , mill ke ju

CTN :45470341

25 Jun, 2026 NA

Sitapur - Uttar Pradesh

Tender For corrigendum : providing of custom bid for services - restoring enlarged holes in the links of the primary cane carrier, secondary cane carrier, bagasse elevator, inter-carrier, main bagasse carrier, and return bagasse carrier to the required bush size by hot forging, in accordance with the instructions of the foreman, assistant engineer, and chief engineer. budget head – manpower (off-season).

CTN :45605640

25 Jun, 2026 NA

Surat - Gujarat

Tender For rate contract for (1) contract for loading sugarcane on cane carrier, (2) contract for transporting boiler ash and fly ash by contractor's equipment, (3) contract for removing bagasse and loading firewood by contractor's equipment, (4) bagasse baling, (5) contract for working of sugar house and emptying lime and sulphur, (6) contract for working of sugar godown, (7) contract for transporting loose biocompost and soil protector plus fertilizer (packed in bags), (8) contract for making biocompost from pressed mud and filling it in guni, (9) contract for 24 hours for transporting pressed mud (per ton) by contractor's equipment, (10) contract for yard cleaning, (11) contract for cleaning of evaporator and juice heater tubes, (12) shift contract for making lime and bringing sulphur from sulphur godown and feeding it to the furnace, (13) contract for spraying biocompost fertilizer in the fields of members through contractor's equipment

Lorrie Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Co-operative

Corporations And Associations And Others