Latest louver Tenders | Government louver Tenders

CTN :43467561

27 Jan, 2026 NA

Liluah - West Bengal

Tender For supply of procurement of aluminium sliding louver shutter lh as per drg. no. c&w.lgd.sk no. 1070 col 2 (lh) for bus type window (lhb coach) etc.

CTN :43357389

08 Jan, 2026 NA

Darjeeling - West Bengal

Tender For corrigendum : supply of led batten (q2) , tower bolts (ferrous metals) as per is 204 (q3) , non - modular piano type domestic electrical switches as per is 3854 (q3) , piano type non modular domestic electrical sockets - is 1293 (q3) , piano type non modular electrical switch socket combination as per is 3854 and is 1293 (q3) , mcb - miniature circuit - breakers for a. c. operation as per is / iec 60898 (part 1) (q2) , steel pipes for water and sewage as per is 3589 (q3) , towel rail / ring / rack / hooks for bathroom (q3) , pillar taps (v2) as per is 1795 (q3) , toilet seat covers (v2) (q4) , bathroom mirror 600x450 , plywood mr 8x4x6mm , pbs roll , wire mess ms mosquito proof 4ft x 50ft , plywood bwr 8x4x10mm , thermostate for geyser , ss kitchen rack , shali patch , soap dish holder , led celling light 12w recessed type , led celling light 36w recessed type , bathroom cabinet mirror 600 x 450 , sink mixture cp 15mm , bib cock pvc long body 15mm , plywood mr 8x4x12mm , bathroom mirror 450x350mm , door handle 100mm aluminium , heating element 2000w triangular type , pvc pipe 75mm x 6m , door stopper aluminium , angle holder pvc , hasp and stapples aluminium 100mm , pvc switch board 4inch x 7inch , helical door spring , gl socket 15mm , door handle 200mm aluminium , door handle 150mm aluminum , gi barral nipple 20x100mm , butt hinges ss 100mm , hasp and stapples ms 100mm , paint brush 100mm , ss grating 100mm round , butt hinges ms 75 mm , door handle 100mm brass , door handle 200mm brass , paint brush 75mm , door handle 200mm cp , pvc storage tank lid , teflon tape , ht 11 kv endjoint 95 sqmm 3c each , butt hinges ss 50mm , drawer knob brass ) /bid number: gem/2025/b/7000178 * /dated: 27-12-2025 & & / bid document1 / 49

CTN :43205945

13 Jan, 2026 NA

Chittorgarh - Rajasthan

Tender For corrigendum : tender for supply of make- ird mechanalysis limited , ird544m - vibration sensor , inductive velocity , top exit , mil 2-pin connector , 42.52mv/mm/s , 10 hz - 1 khz sku - m97120 , make- ird mechanalysis limited , stud for vibration sensor item no 1 , mounting/grub screws , 1/4 inch-28unf male , m6 x 1 male sku - stud-m6 provides connection between vibration sensor and mounting pad , m/s ird mechanalysis limited , vibration sensor mounting pad mild steel blackodized for ird544m (60x60x16 mm) with m6 thread for item no 1 tapped sku - ms-pad-ird544m , make- m/s ird mechanalysis limited , vibration sensor cable assembly for item no 1 , signal cable teflon 3.5mm dia , ss conduit 5mm id , 15 meter length straight , 2 pin ms , shielded , spade lugs at free end sku - m601015spade lugs at free end carry following colour code- red core- signal live , black core- signal ground , green core- signal shield , make- ird mechanalysis limited , eddy current pickup set comprising of probe , driver and connecting cable for 9 meter system. constituents. , make- m/s ird mechanalysis limited ird8800 rack , 8 position , 5u sku - m88008 this is the bin and will accomodate ird8800 cards , make- ird mechanalysis limited ird8800 (8800) , m88250 (88250) casing vibration module , 2ch velometer input (mv /mm/sec) and 1ch key phasor input , api standard 670 compliant sku - m88250-dc ird8800 series module m88250 can work with all types of velocity output vibration sensors that provide mv/mm/sec output - like ird531 (4 mv/mm/sec) and ird544m (42.52 mv/mm /sec) , make- m/s ird mechanalysis limited , ird8800 (8800) , m88900 (88900) - speed module , 2ch eddy current pickup input , api standard 670 compliant , input- 24 v dc , sku - m88900-dc , input- accelerometer and/or velometer , outputs-4-20 ma dc output proportional to full scale vibration rs-485 modbus rtu/tcp-ip output buffered output alarm relay contacts trip relay contacts full scale , alarm , trip , units , sensitivity and other parameters are programmable and password protected , make- ird mechanalysis limited , ird8800 (8800) , m88600 (88600) - eccentricity module , 2ch eddy current pickup input , api standard 670 compliant , input- 24 v dc , sku - m88600-dc input- accelerometer and/or velometer , outputs-4-20 ma dc output proportional to full scale vibration rs-485 modbus rtu/tcpip output buffered output alarm relay contacts trip relay contacts full scale , alarm , trip , units , sensitivity and other parameters are programmable and password protected , make- ird mechanalysis limited , 35 mm din rail mount industrial grade power supply , 480 w , product- rps480 , 24 v dc output , dimension- 60 x 154 x 158.55 mm (w x h x d) , weight- 1050 gms , sku - rps480-24-ce supports 90 - 264 vac / 127 - 370 vdc power factor more than 0.95 full load over entire input range protection against short circuit , overload , overvoltage & over temperature cooling by free air convection ul 508 approved (e522848) efficiencies up to 93 % dc ok relay contact , make- ird mechanalysis limited , cabinet 1500 x 600 x 600 in mm , ip32 sku - cabinet-1500-600-600-ip32 , installation commissioning and calibration check of all supply sensor with unit at site

Central Government/Public Sector

CTN :43446444

08 Jan, 2026 NA

Jhansi - Uttar Pradesh

Tender For supply of louver frame arrangement for nmghs

CTN :43434199

27 Jan, 2026 NA

Khammam-T - Telangana

Tender For supply of douglas fir timber as per annexure i -supply of douglas fir 2 x 4 x 3and9. 1by8 louver diagonal 5 4635 138 for cooling tower , supply of douglas fir 2 x 4 x 2x-11. 13by16 louver diagonal 8 451 113 for cooling tower , supply of douglas fir column splice 2 inches x 4 inches x1feet 6 inches for cooling tower , supply of douglas fir half round column splice 7by8x1. 3by4n x 3 11. 1by2 67 2484 3 for cooling tower , supply of douglas fir half round column splice 7by8 x1. 3by4n x3 9 67 2484 5 for cooling tower

CTN :43410173

09 Jan, 2026 6.36 Lacs

Multi City - Karnataka

Tender For supply of material and machinaries for construction of a kitchen at kokatanur thota school, a kannada junior primary school in ramatirtha village - pvc pipe of 4kgcum75 mm morb35, ceramictiles 30x 30 cms morb25, atn36 providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on10mm thick cement plaster, atn26 providing and removing centering, shuttering, strutting, propping etc., and removal ofform work for chejja, atn30 providing and fixing in position fully panelled matti / nandi wood shutters for doors, stylesand rails of 30mm. thick with bottom and lock rails 180mm wide top rail and styles 100mm wide as perdrawing and panels of 20mm thick including cost of materials, labour, hom of machineries complete asper specifications. ( excluding cost of fixtures ), atn46 providing and placing on terrace, polyethylene water storage tanks with manhole lidand suitable locking arrangements, making holes of suitable diameter for inlet, outlet and over flowpipes, including cost of all materials, labour, transport charges, hom of equipments and testingcomplete as per specifications.(for 1000 litre capacity) as per is 12701 1996. specification no.kbs13.22, atn39 providing and finishing external walls in two coats with waterproof cement paint ofapproved brand and shade to give an even shade after throughly brooming the surface to remove all dirtand loose powdered material, free from mortar drops and other foreign matter cost of materials, labour,complete as per specifications., atn22 burnt bricks class 35 (non modular), atn13 rubble stones, atn29 providing matti / nandi wood frames of doors, windows, clerestory windows, ventilatorsand other frames, wrought, framed or assembled including making plaster groves ( excluding cost ofcement concrete and side clamps ), but including cost of materials, labour, hom of machineriescomplete as per specifications., atn28 providing and removing centering, shuttering, strutting, propping etc., and removal ofform work for roof slab, atn25 providing and removing centering, shuttering, strutting, propping etc., for beams, at22.binding wire, at21.tmt bars fe 500, atn-12.bond stone 20 x 20 x 45 cm, atn-9.portland cement, atn-8.broken stone aggregate 12 mm to 10 mm size, atn-16.hom of vibrator 0.71 days, atn-15.plasticizer / super plasticizer, atn-14.mixer (concrete small used in culvert), atn-10.mixer (concrete) - 1 cum capacity, atn-7.broken stone aggregate 20 mm size, atn-6.broken stone aggregate 40 mm size, atn-2.coarse sand (zone iii), providing and installing of pre painted galvalume iron trapezoidal profiled sheet, providing and fixing in position brass bib cock of approved quality 20mm nominal bore, providing and fixing to wall, ceiling and floor, medium density polyethylene pipes 6.00 kgf/sq.cm, fabricating, supplying and erecting m.s. tubulartruss, providing and fixing in position black cuddapah slab / shahabad slab / thandur blue slab 4 cms thick, providing and fixing glazed vitrified tiles of approved make, quality and colour of size 600x600x10mm thick, providing and fixing in position in cement concrete steel glazed windows and ventilators side hung/top hung fully openable as per approved drawings, providing and applying two coats dry distemper of approved brand, and shade on wall surface including priming coat and whitening after throughly brooming the surface to remove all dirt, dust, mortar drops and other foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour, complete as per specifications, providing and removing centering, shuttering, strutting, propping etc., for columns, pillars, post and struts, square / rectangular / polygon in plan including cost of all materials, labour complete as per specificaiton

State Government

CTN :43413599

19 Jan, 2026 59.47 Lacs

Raichur - Karnataka

Tender For procurement of railway track materials - m.s rails as per irs section, fish bolts, tongue rail left 52kg,11.9m, tongue rail right 52kg,11.9m, check rails bolts & nuts, erc clips, rubber pad, steel liners t 3741, steel liners 3742, j clips rt-4158, plates screw t-3912, bearing plate bolts, strethcher bar, strecther bar bolts, bolts and nuts size 25x 270mm as per rdso t 11522, bolts and nuts size 25x 280mm as per rdso t 11523, bolts and nuts size 25x 300mm as per rdso t 11525, bolts and nuts size 25x 310mm as per rdso t 11526, bolts and nuts 25x360mm as per rdso t 11531, bolts and nuts 25x180mm as per rdso t 11513, bolts and nuts 25x320mm as per rdso t 11527, bolts and nuts 25x340mm as per rdso t 11529, bolts and nuts 25x360mm as per rdso t 11531, bolts and nuts 25x380mm as per rdso t 11533, stop bolt 18x65 mm as per rdso t 11627, ms tapper washers as per rdso t 5847

corporations/Associations/Others

CTN :43424229

21 Jan, 2026 NA

Hisar - Haryana

Tender For auction sale of ms iron scrap off sorts,ms iron scrap off sorts 25.240, ms rail scrap,ms rail scrap,ms iron scrap off sorts -1.801ms rail scrap,ms iron scrap off sorts -10.968ms rail scrap,ms iron scrap off sorts-6.119, ms rail scrap dismantled,ms iron scrap off sorts -3.081ms rail scrap dismantled,ms iron scrap off sorts-16.896ms rail scrap,ms iron scrap off sorts -4.333, ms rail scrap,cast iron scrap,plastic scrap of mcb,plastic reel scrap off size,empty plastic reel scrap of ht wire,scrap of empty drums u/s 40/45 gal

CTN :43420757

12 Jan, 2026 NA

Darjeeling - West Bengal

Tender For supply of pvc water storage tank 500 ltr , pvc tank 1000 ltr capacity , cp pillar tap 15mm , kitchen plate rack steel 600 x 900mm , cp brass fancy bib tap 15mm without nozzle , bib cock cp 15mm fancy type long body , wash hand basin 550x400mm , european wc with s trap , glass pane, 4mm , iwc orrisa patern 580 x 440 mm , cp hot and cold wall mixture , pvc bib tap long body 15mm bore , stainless steel curtain rods clamps or knobs best quality , cp towel ring , pvc waste pipe 32 mm dia for urinal , bitumen tape flash strip 100mm wide 10 mtr long , angle cock 15mm cp , shower rose cp 100mm fancy type. , 4- tier metal shoe rack, 20 pairs metal shoe tower shelf storage cabinet 35. 6 x 11. 9 x 33. 3 inches , cp hand shower , m seal. , gi pipe tubing medium grade 15mm dia with isi marked , soap tray stainless steel , al sliding tower bolt 250 mm . , road stud rectangular poly carbonate 125mm x 125mm x 25mm with a shank of 65mm red or yellow. , dark eye polyurethane portable speed bumps,size l-500xw-100xh015mm , self adhesive bituminous felt fibre glass based. 3mm thk for water proofing in 20 mtrs roll. , glazed oil putty in 10kg bag. , ss wire mesh mosquito proof 24 guage 16 aparture in standard roll size 4 feet wide x 15 or 20mtr long. , pvc waste pipe 32 mm dia 900mm corrugated , pvc water tank cover 500 ltrs. , ss wire mesh mosquito proof 24 guage 16 aparture in standard roll size 3 feet wide x 15 or 20mtrs long. , aluminium bow handle 150mm long. , plastic seat cover for wc white. , gi union 20mm. , pvc shower rose 125mm dia with swivel arm 225mm. , helical door spring 150 mm , pvc connection pipe for gyser inlrt 15mm x 450mm long. , pvc waste pipes 32mm dia for whb. , gi tee 20 mm , pvc conncetion 600mm. , steel butt hinges 75 mm length , cp angle cock 15mm , towel rail cp 750mm long. , gi nipple 20mm dia x 100mm length. , aluminium sliding ) /bid number: gem/2025/b/6906204 * /dated: 02-01-2026 & & / bid document1 / 79 & & ' ' /item category door bolt 200mm long. , gi socket 20mm. , tank nipple 20mm with check nut , gi socket 15 mm , ai bow handle 100mm , tank nipple 15 mm with check nut , gi elbow 20 mm , steel butt hinges 100 mm length , gi hexa nipple 15mm , bitumen leak stop best quality , cp grating 100 mm with hole , gi union 15mm. , stainless steel utensil hooks in kitchen. , gi nipple 15 x 75mm long. , screw wood steel 35 mm 100 nos , gi tee red 15 x 20mm. , gi nipple 15mm x150mm. , shower rose ptmt 15mm x 100mm , gi elbow 15mm. , gi tee 15mm. , gi barrel nipple 15 mm dia. , pvc stop cock 15mm , white cement in pack . , wooden beading 10mm width for doors and windows. , gi hexa nipple 20mm , aluminium hasp and staple 100 mm. , tower bolt ms 100mm , gi reducer socket 20x15mm. , gi nipple15mm x 100mm. , tower bolt ms 150mm , aluminium handle 125mm long. , aluminium tower bolts 100mm long. , pvc grating 100mm dia for floor. , gi red elbow 15mm x 20mm. , aluminium tower bolts 150mm long. , stainless steel sliding door bolt 300mm , nails wire 75mm. , pvc waste pipes 32mm x 750mm long. , gi plug 15 mm dia. , wire nail 25mm long x 2mm dia. , nail 30 or 25mm. , hasps and staples aluminium 150mm. , nails 50mm. , nails 40mm , hacksaw blade 12 inch. , gi nipple 20mm dia x 50mm length , shalipatch ready made bituminous pot hole patching mix , kit for pvc low level cistern 10 ltr cap white colour , cushion foam 32 mm density covered with super cloth 22 feet x21 feet. , teak wood beading 2 inch used on edges of doors, window etc , plywood commercial 4mm thick 8 feet x 4 feet conforming isi ost face , teak wood beading 2 inch used on edges of doors, windows etc , ply wood commercial 12mm thick 6 feet x 3 feet conforming isi , spirit de-natured , lakh dana for polishing , ply wood commercial 12mm thick 7 feet x 3 feet conforming isi , thinner //bid details2 / 79

Central Government/Public Sector

CTN :43245909

07 Jan, 2026 17.30 Lacs

Angul - Odisha

Tender For corrigendum : supply of supply of spares for cat d11t ripper dozer and cat834k wheel dozer at lingaraj ocp d d -nut clip,part no-1728591 , liner as cab front,part no-3044031 , liner as cab rear,part no-3044032 , louver as-vent,part no-4604734 , bezel as,part no5861226 , bezel as,part no-5861227 , switch gp-wiper 24-volt,part no-4876510 , harness as-window wiper,part no-5258896 , floor mat cab,part no3619747 , panel-access rh,part no-5861814 , seal,part no-3801337 , seal,part no-3801338 , seal,part no-3801339 , seal,part no-5p7513 , gasket,part no-3411408 , gasket,part no-3412316 , bolt m 24 x 3 x 140 mm,part no-8t4649 , installation ar caes machine control,part no-4745719 , mount,part no-9x9896 , cable ascommunication,part no-3594778 , nut-special 5 by 818 thd,part no-3611045 , cap as-connector,part no3858201 , plate as,part no-4485038 , nut-weld,part no-6v9632 , seat and mounting gp-cloth air,part no3418561 , bolt 1-1 by 4-7x4-in,part no-7x0428 , plate as,part no-3411826 , duct as rh,part no-5861806 , bolt 1-1 by 2-6x6-in,part no-2888101 ) /bid number: gem/2025/b/6980164 * /dated: 18-12-2025 & & / bid document1 / 39

Louver Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

corporations/Associations/Others

Central Government/Public Sector