Latest lovibond tintometer Tenders | Government lovibond tintometer Tenders

CTN :45475070

15 Jun, 2026 NA

Chennai - Tamil Nadu

Tender For purchase of non-consumables for physics lab in basic engineering (first year) department - purchase, joule calorimeter - copper vessel, battery eliminator 3a, (2,4,6,8,10,12 v), tubular rheostat 20-3.3a, one way plug key, analog type dc ammeter (0 2a), voltmeter (0-5v), thermometer (alcohol), stop clock, ic regulated battery eliminator- ic regulated, input: 230v ac; output: 0-12v dc in steps of 2v; capacity: 1a or 2a., galvanometer- moving coil type, 30-0-30 scale, unbranded with bhel specification-sensitivity 0.143mm/v, voltmeter- dc voltmeter; range 0 10 v, analog, ammeter- dc (0 - 2 amp), parallelogram apparatus- parallelogram law of forces apparatus fitted with stand, decade resistance box- resistance box 12 month warranty (dial type) -manganin coil- 2 dials, sonometer apparatus- sonometer with meter scale attached along with knife edge, tuning forks set 256, 384, 512 ranges, hammer, slotted weight - 500 gm each to a total of 3 kg. brass wire (5 m), travelling microscope- branded travelling microscope 0 200 mm horizontal and 0-150 mm vertical measurement, potentiometer - it features a 1-meter to 10-meter constantan/manganin wire stretched on a wooden or sunmica baseboard with a millimeter scale. it includes 4mm brass terminals, a pencil jockey for contact, wire options (10 wires), and a typical resistance range of 10-20 ohms, ideal for high-precision voltage measurements., viscosity apparatus stokes apparatus with metre scale attached and long cylindrical glass jar, glass beads small size (1 box), screw gauge (0-15 mm), rheostat - high-grade ceramic tube, oxidized resistance wire, 0.5a 5a, range 10 100 ., deflection magnetometer apparatus - deflection magnetometer apparatus with compass box and two short bar magnets, solar cell kit- the apparatus consist of variable dc power supply, led, solar cell and two multimeters (or an ammeter and a voltmeter). a variable dc power supply of 0 5v. light source is provided by led. the illumination intensity of the led can be controlled, wheatstone bridge kit- series arm: four decade dials in steps of thousands, hundreds, tens, & units of ohms. ratio arm: the ratio arm of the bridge is capable of selecting multiplying factor of 0.001, 0.01, 0.1, 1, 10, 100, 1000 for resistance measurements. two press keys are provided, one marked b is for battery & one marked g is for galvanometer one toggle switch is provided for internal battery a sensitive galvanometer is provided in the bridge., ohms law verification kit- battery eliminator-3a, (2,4,6,8,10,12 v), tubular rheostat 20-3.3a, one way plug key, analog type dc ammeter (0-2a), voltmeter (0-5v), standard resistance coil of 1, 2 ohm (2-set) wound on a wooden bobbin, boyle s law apparatus - the apparatus includes the quill tube, a retort stand, a clamp, and a mounted meter scale. quill tube specifications: length: approximately 50 cm. bore diameter: uniform bore, roughly 1 mm to 2 mm. construction: glass tube with one end sealed. trapped substance: a mercury pellet (or thread) of length 10 to 15 cm is introduced to enclose a column of air. mounting: attached to a half-meter or meter scale., torsional pendulum - torsional pendulum metallic disc, symmetrical masses and pendulum stand, steel wire, compound bar pendulum- one meter long iron strip well painted with holes at a distance of every 5 cm and also with pair of brackets and a heavy base table top stand with stop clock, helical spring apparatus-- structure: a rigid support mounted on a heavy metal base, typically cast iron, to ensure stability during tests. springs: high-tensile steel spiral springs, typically (approx 25 mm) diameter, (100 mm) long. measurement scale: a vertical steel meter scale, usually with (1mm) graduations, for precise deflection measurement. loading mechanism: a, typically (50g), hook-attached weight hanger at the bottom.pointer: a fine pointer attached to the bottom of the spring moves along the scale. accessories: includes a set of slotted weights (e.g., (6

CTN :45477002

22 Jun, 2026 NA

Uthangarai - Tamil Nadu

Tender For supply of physics lab equipments - list of equipments, wheatstone bridge kit series arm: four decade dials in steps of thousands, hundreds, tens, & units of ohms. ratio arm: the ratio arm of the bridge is capable of selecting multiplying factor of 0.001, 0.01, 0.1, 1, 10, 100, 1000 for resistance measurements. two press keys are provided, one marked b is for battery & one marked g is for galvanometer one toggle switch is provided for internal battery a sensitive galvanometer is provided in the bridge. for specifications refer nit, torsional pendulum torsional pendulum metallic disc, symmetrical masses and pendulum stand, steel wire. for specifications refer nit, compound bar pendulum one meter long iron strip well painted with holes at a distance of every 5 cm and also with pair of brackets and a heavy base table top stand with stop clock. for specifications refer nit

Central Government / Public Sector

CTN :45471813

18 Jun, 2026 NA

Waltair - Andhra Pradesh

Tender For supply of laser distance meter (q3)

State Government

CTN :45231232

11 Jun, 2026 NA

Ghaziabad - Uttar Pradesh

Tender For corrigendum : supply and execution items for reliability improvement of signalling inst. section of sr. dste/1/lko of lucknow div. nr. - excavating and refilling of trench to the level of ground with rammed earth asper drg. no.(nr/s&t/con/1.1/97a) so as not to form a drain 0.3 mtrs wide & 1mtr deep on both side of the station along side the track. it shall confirm to the safe distance as per signalling and cable plan in all type of soil, it also includes clearence of roots of trees and bushes., excavating and refilling of trench 0.3 mtrs wide & 0.8 mtr deep on pitced/stone/bricks paved surface, road/crossing/platform etc. and restoration of surafce to original condition., laying of signalling/telecom/power cables of different sizes as per attached guidelines (drg. no.(nr/s&t/con/1.1/97a) or latest on signalling cable laying and as per cable route plan approved by railways through trenches, rcc pipe, dwc pipe, gi pipe etc and meggering of cable before and after its laying of all type of outdoor cables. contractor have to transport cable from any store of lko division to site carefully. meggering to be done for each drum separately. meggering sheets to be supplied and filled up by contractor and submitted to railways, as per instructions by consignee., supply and laying of 2nd class bricks in the trench and laying as per drg. no. (nr/s&t/con./1.1/97a) or latest and as per instruction of the site engineer., boring and trenchless cabling along with supply and insertion of hdpe/dwc self lubricated pipes as per rdso spec no. rdso/spn/204/2011 ver 1.1 or latest of 120mm nominal dia in the bore at the depth of 1.4 meter to 2.1 meter from formation level (level of earth below ballast) as per drawing and as directed by engineer incharge by trenchless technology for laying of signalling /telecom/power cable under track /culvert etc. cable laying covered separately. inspection-consignee for supply of dwc/hdpe pipe. the following required coupling arrangement should also be supplied: 1. suitable snap fit couplers withrubber o ring, 2. spacers, 3. tees. 4. bend. 5. end cap(1 no. =6mtr ,straigh tpipe). (a) the cost shall include horizontal boring through any intermediate obstruction, either natural or man made or any boundary etc. (b) the rate is inclusive of all the materials equipment and labour required for during trenchless horizontal boring under the railway track. nothing extra shall be admissible on any account than the rate quoted above. (c) the pipeis to be laid underrailway track/road /culvert. all necessary arrangement are to be provideand all precautions are to be end is not deviated from the horizontal level line by more than 250mm in horizontal and vertical direction. (d) the rate shall be inclusive of direction and protection of underground utilities encountered during boring. (e) the payment for boring shall be made only when dwc/hdpe pipe are laid in the bore., concreting unschduled items in concrete of 1:3:6 ratio in cement, coarse sand and aggregate 25mm at different places in the yard and plastering top in fine plaster of 1:4 cement sand ratio. it also includes the excavation of earth as required at site and as per instruction of site incharge. the volume in cubic metres shall include the volume occupied by any ci foundation, trestle, ms angle or flat or gi pipe required to be embedded in the casting. cement coarse sand and aggregate 25mm are to be supplied by the contractor., earth work for excavation and refilling around location boxes and signals etc. where necessary including 50m lead and 1.5m lift. the lead is to be measured from centre of gravity of location to the centre of filling and lift from main ground level. the earth work should be well rammed including breaking of clods, levelling and dressing etc. as per instruction of engineer at site., brick work with well burnt bricks in foundations and plinths with cement and sand (ordinary) mixture of 1:4 ratio. all material is to be supplied by th

CTN :45448251

15 Jun, 2026 NA

Mumbai - Maharashtra

Tender For supply of bosch infrared thermal camera and scanner gtc 600 , digital distometer make skadioo or bosch , speedo or odo meter for measuring of road distance , road depth gauge 6 inch 150mm dia , long probe heavy multipurpose temperature thermometer for road work make labart , electric bench griding wheel green silicon 150mm 80 grit , mortise chisel half inch make anant , smooth plane 04 inch make anant , smooth plane 10 inch make anant , cross pein hammer 300gm make taparia , firmer chisel 25mm make anant , chisel for carpenter 25mm make anant , glass cutter , screw driver both side make taparia , wiremesh cutter make taparia , center wall punch make taparia , mini hack saw frame with blade , cross pein hammer 100gm , carborunum stone 8 inch make universal , measuring tape 3mtr make hi speed , pincer 8 inch , hammer 300gm , hammer 400gm , box wrench heavy duty 14 inch make taparia , teflon tape , screw driver 12 inch plus make taparia , screw driver 12 inch minus make taparia , monkey wrench make taparia , adjustable wrench make taparia , nose plier make stanley or taparia , plier make stanley , pipe extractor

CTN :45435036

10 Jun, 2026 NA

Tiruchirappalli - Tamil Nadu

Tender For supply of equipment items > - parallelogram law apparatusparallelogram law of forces apparatus fitted with stand, travelling microscopebranded travelling microscope 0-200 mm horizontal and 0-150 mm vertical measurement (two separate experiment), helical spring apparatusstructure: a rigid support mounted on a heavy metal base, typically cast iron, to ensure stability during tests. springs: high-tensile steel spiral springs, typically (approx 25 mm) diameter, (100 mm) long. measurement scale: a vertical steel meter scale, usually with (1mm) graduations, for precise deflection measurement. loading mechanism: a, typically (50g), hook-attached weight hanger at the bottom. pointer: a fine pointer attached to the bottom of the spring moves along the scale. accessories: includes a set of slotted weights (e.g., (6times 50g) or similar sets) for incremental loading., boyle s law apparatusthe apparatus includes the quill tube, a retort stand, a clamp, and a mounted meter scale. quill tube specifications: length: approximately 50 cm. bore diameter: uniform bore, roughly 1 mm to 2 mm. construction: glass tube with one end sealed. trapped substance: a mercury pellet (or thread) of length 10 to 15 cm is introduced to enclose a column of air. mounting: attached to a half-meter or meter scale., torsion pendulumtorsional pendulum metallic disc, symmetrical masses and pendulum stand, steel wire, compound bar pendulumone meter long iron strip well painted with holes at a distance of every 5 cm and also with pair of brackets and a heavy base table top stand with stop clock, viscosity apparatusstokes apparatus with metre scale attached and long cylindrical glass jar, glass beads small size (1 box), screw gauge (0-15 mm), sonometer apparatussonometer with meter scale attached along with knife edge, tuning forks set 256, 384, 512 ranges, hammer, slotted weight -500 gm each to a total of 3 kg. brass wire (5 m), metre bridgetype: 1 m length, with uniform wire (resistance wire) material: constantan or manganin (low temperature coefficient) scale: 0 100 cm, engraved or printedbase: wooden or metal, rigid, non-conductive supportjoints / terminals: brass or copper, fixed for connections2. galvanometertype: analog, moving coil or digital (for null detection) range: sensitive to detect micro-ampere currentsinternal resistance: high, typically ~100 or as specified5. cells / power supplytype: leclanch cells (1.5 v each) or dc power supplynumber: 2 4 cells in series (or supply ~3 6 v), ohms law verification kitbattery eliminator-3a, (2,4,6,8,10,12 v), tubular rheostat20-3.3a, one way plug key, analog type dc ammeter (0-2a), voltmeter (0-5v), standard resistance coil of 1, 2 ohm (2-set) wound on a wooden bobbin, joule calorimeter apparatuscopper vessel, battery eliminator-3a, (2,4,6,8,10,12 v), tubular rheostat 20-3.3a, one way plug key, analog type dc ammeter (0-2a), voltmeter (0-5v), thermometer (alcohol), stop clock, potentiometer apparatusit features a 1-meter to 10-meter constantan/ manganin wire stretched on a wooden or sunmica baseboard with a millimeter scale. it includes 4mm brass terminals, a pencil jockey for contact, wire options (10 wires), and a typical resistance range of 10-20 ohms, ideal for high-precision voltage measurements., solar cell kitthe apparatus consist of variable dc power supply, led, solar cell and two multimeters (or an ammeter and a voltmeter). a variable dc power supply of 0-5v. light source is provided by led. the illumination intensity of the led can be controlled, deflection magnetometer apparatusdeflection magnetometer apparatus with compass box and two short bar magnets, ic regulated battery eliminatoric regulated, input: 230v ac; output: 0-12v dc in steps of 2v; capacity: 1a or 2a., galvanometermoving coil type, 30-0-30 scale, unbranded with bhel specification-sensitivity 0.143mm/v, ammeterdc (0 -2 amp), voltmeterdc voltmeter; range 0 10 v, analog, decade resistance boxresistance box 12 month warranty (dial type) - mangani

Central Government / Public Sector

CTN :45452335

15 Jun, 2026 NA

Waltair - Andhra Pradesh

Tender For supply of laser distance meter (q3)

Central Government And Public Sector

CTN :45452728

16 Jun, 2026 NA

Kaiga - Karnataka

Tender For supply of laser distance meter (q3)

Central Government And Public Sector

CTN :45454742

11 Jun, 2026 NA

Lumding - Assam

Tender For supply, installation, testing and commissioning of dcus/gateways/ allocation of sim network service provider and the arrangement of sim cards to enable reliable medium for two-way communication between smart meter & amp:, hes (head end system) over rf mesh network/cellular network. 1. the dcu/gateway shall be compatible with the smart meters mentioned above. rf mesh network should use 865-867 mhz frequency band. 2. the data acquisition (push/pull) frequency shall be configurable 15 min, 30 min or 60 minutes. it shall push events such as tamper, power off etc. to hes immediately on occurrence/receipt from meters. 3. it shall have provision for the cellular, wifi and ethernet communication for the backhaul tohes. 4. sufficient number of gateways shall be installed in such a way that all the meters are covered in the network efficiently. 5. it shall be capable to handle data of minimum 500 nos. of any type of smart meter (1ph/3ph). it shall be able to communicate with the nearest meters at a distance of at least 300 m, depending on topographical features. 6. communication of the nearest meters with other meters shall be established through appropriate mesh formation. rf mesh shall support self-forming and self-healing features. 7. rfmesh shall support at least 15 no. of hops. 8. the equipment shall be weather-proof and dust-proof (minimum rating: ip54 for indoor and ip65 for outdoor installation). it shall have rechargeable battery with backup for 1(one) hour for normal meter reading, to push tamper event, carry out on demand reading, etc. 9. it shall have passed the following emc tests from reputed lab: conducted emission, electrostatic discharge (esd), radiated immunity, electrical fast transient (eft) - burst, surge, rf conducted disturbances. 10. rf mesh network shall be established to meet the slas as mentioned in tender document. 11. replacement warranty period shall be 66 (sixty-six) months from the date of supply or 60 (sixty) months from the date of commissioning, whichever is earlier. [ warranty period: 30 months after the date of delivery ] ]

Central Government / Public Sector

CTN :45453792

29 Jun, 2026 NA

Parbhani - Maharashtra

Tender For supply of bosch laser distance meter 250meter range bosch (bosch glm 250 vf profession) or similar. [ warranty period: 30 months after the date of delivery ] ]

Lovibond Tintometer Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government / Public Sector

State Government

Central Government / Public Sector

Central Government And Public Sector

Central Government And Public Sector

Central Government / Public Sector