Latest lp sheet Tenders | Government lp sheet Tenders

corporations/Associations/Others

CTN :45490050

16 Jun, 2026 4.67 Lacs

Chandigarh - Chandigarh

Tender For providing and fixing of open air gym equipments in various parks of sector 20,chandigaarh under ward development fund. - providing and fixing of chest press double size / dimensions length -1200 milimeterwidth- 700 milimeterheight 1800 milimetermaximum weight -120 kilogrammaterial:- all the pipes shall be galvanized iron (gi) and isi marked to ensure strength, durability, and corrosion resistance. the main central pipe shall be an 80 mm nb gi pipe, while the handle frame and sheet frame shall each consist of 40 mm nb gi pipes. the connecting links shall be made of 32 mm nb gi pipes, and the footrest pipe shall also be 32 mm nb gi. the mild steel (ms) foundation plate shall have a minimum thickness of 12 mm. the foundation pipe shall consist of a gi pipe anchored 750 mm deep and supported with an ms angle of 25 25 4 mm for stability. the seat and backrest shall be made of high-density polyethylene (hdpe) sheets with a thickness of 3 mm, designed with a uniform bending radius to avoid sharp edges and ensure user safety. all nuts and bolts used for assembly shall be made of galvanized iron (gi) to enhance durability and resistance to corrosion. the movement mechanism shall be fitted with ball bearings that are self-lubricating and sealed to protect against rain, dust, and other environmental elements. the closing caps of open ends of all pipes, as well as bearings, bushes, and bases, shall be covered with fibre-reinforced plastic (frp) closing caps having a minimum thickness of 3 mm. all plastic components shall be uv-stabilised and weather-resistant to ensure long-lasting performance in outdoor conditions.colour:- green paint finish- power coated, uv resistantpaint coating thickness (min) 100 micrometerwarranty 3 years.complete in all respects, including installation of equipment in a cement concrete block of size 5 x 5 x 1 , to the entire satisfaction of the engineer-in-charge., providing and fixing of leg press leg shaper complete in all respects having following specifications.a) all pipes should used in the equipments should be galvanised with 3mm thickness.b) multi colour powder coating with polyster paints should be used on all the equipments.c) the foot pedal on all the equipments should be of aluminium only.d) the seats should be made of high quality plastic with colour scheme in yellow or orange.e) the high end bearings such as skf/nbc must be used in all the equipments.1 dimensions- 1730*450*1450mm2 colour- customizable multi colour and complete powder coat3 size of main tube-114*3.75mm steel pipe4 size of supporting tube-76*3mm steel pipe5 there is restrainer inside, the distance between swing arm and main tube is greater than 230mm avoiding the danger of getting stuck.6 al alloy protecting covers are used at the top other main tubes to protect from the rainwater7 anti-skid components are used at the pedal parts.8 the distance between two spinners is no less than 230mm, avoiding the damage of being stuck9 anti theft cover is made by stainless steel/high quality plastic.10 thickness of bearing bracket is no less than8mm11 hazardous materials like coating agent, rubber are under national newest standard.functions: develops the strength of lower limbs, and improves the stability and agility of three main joints of lower limbs; good for the healing of inconvenience of bending and stretching of lower limbs, and muscular atrophy of lower limbs, rheumatoid arthritis, sciatica, sprain of the anklebone, etc. approaches: sit on the chair and step on the footboard. stretching legs with force and recover slowly. repeat. users: suitable for people of different ages.complete in all respects, including installation of equipment in a cement concrete block of size 5 x 5 x 1 , to the entire satisfaction of the engineer-in-charge., providing and fixing of parallel bars size/dimensionslength- 900 millimeterheight 800 millimetermaterial:- all the pipes shall be galvanized iron (gi) and isi marked to ensure strength and durability. the ver

CTN :45499216

20 Jun, 2026 NA

Gwalior - Madhya Pradesh

Tender For supply of plywood general purpose wwr ab 9 ply 180 , plywood for general purpose mr-ab 5 ply , sheet cellular 37mm thick 2m x1m , spray cleaner , anabond al 673 350 gms , ect rodes welding steel mild general purpose , quick fix , metal cleaner and rust remover

CTN :45354709

12 Jun, 2026 NA

Kota - Rajasthan

Tender For bid to ras supply of s cotton theread 210 dtex x2 white 500m , cloth dosuti cotton yellow 91cm wide , oil linseed raw , adhesive padding glue mowicol l , paper wrapping waxed 841 mm x 100 mtr , polythene film 25mm thick x 1m width , electrode welding high alloy steel 3.15mm , wire steel mild annealed 0.56mm , sewing thread speen polyster og , paper wrapping 1189mmx100mtrs , s cotton thread 210 dtex x2 white 500m , s cotton thread 100 dtex x6 khaki 1000m , s cotton thread 100 dtex x6 white 50m , sewing cotton thread 590dtex x3 white 1000 , nails steel wire round 40mm x 2mm , nails steel wire round 25mm x 2mm , nails steel wire round 100mm x 5.00mm , nails steel wire round 15mm x 1.6mm , electrodes welding steel armour 4mm , wire steel mild annealed 5mm , electrodes welding steel armour 3.15mm , wire steel mild bright 1.25mm , electrodes welding steel mild general pu , adhessive well seal , bleaching powder stabilished , cloth bunting india green 145 cm , cloth bunting scarlet , cloth bunting yellow , plywood for general purposes mraa9 ply , polythene film .18mm thick x 1m width , polythene film .04mmm thick x 1m width , washer plain steel zinc plated 6.6mm , washer plain steel zinc plated 11mm , plywood for general purposes mr-ab 3 pl , paper wrapping kraft 1189mm x 100mm , nails steel wire round 30mmx2mm , nails steel wire round 70mm x 2.8mm , wire steel mild annealed 2.00mm , chloroxylenol solution , s cotton thread 100 dtex x6 black 500mm , nails steel wire round 20mm x 1.6mm , electrodes welding steel high tensils 3 , abrasive paper glass is grit 150 size o , washer spring single coil type a stee , water for storage bty , tubing copper round seamlesss od 8mm x wt , pins cotter split steel 2.5mmx 50mm , pins cotter split steel 3.2mm x 25mm , washer plain steel zinc plated 9mm , washers spring sing coil type b steel , flux welding alluminium 110g container , flux welding bronze 450g container , graphite dry flake , inhictor c vapour barrier water soluble , jointing as f comp gr .8m 100x100cm , cork sheet thick 3.2mm , can round with lever lid 0.5kg , paper wrapping water proof plain 841mm //bid details 2 / 50

CTN :44855837

12 Jun, 2026 NA

Jalpaiguri - West Bengal

Tender For bid to ras supply of excavating in trenches n exc 1.5m wide as per scoope of work , m and l pcc type d2 using 40 mm graded stone as per scoope of work , returning filling in including spreading levelling as per scoope of work , m and l sand filling under floors or in foundations as per scoope of work , surface dressing n. exc 15 cm deep in soft loose soil as per scoope of work , m and l for stone hardcore of gauge as per scoope of work , m and l for 100 mm thick pccm as per scoope of work , m an l for prepolished chemically treated as per scope of work , m and l for brick works with fly ash bricks straight as per scope of work , m and l for brick works with fly ash bricks straight as per scoope of work , m and l for rcc nominal mix type b1 as per scoope of work , m and l for mild steel tmt bars 10mm dia and overas per scoope of work , formwork to sides and soffits of flooras per scoope of work , material and labour for vitrified ceramic joint free as per scoope of work , m and l for vitrified ceramic joint free tiles as per scoope of work , m and l for 15 to 18 mm thick granite as per scoope of work , m and l repair of 18mm thick marine ply laminatedas per scoope of work , m and l as in repair sheet glass 3 mm thick as per scoope of work , m and l for 12 mm thick ply gradei as per scoope of work , m and l 100 mm long stainless steel hinges as per scoope of work , m and l stainless steel c profile handle including as per scoope of work ) /bid number : gem/2026/b/7403889 * /dated: 11-04-2026 & & / bid document 1 / 22

CTN :45484463

19 Jun, 2026 NA

Tawang - Arunachal Pradesh

Tender For supply of amps make havells l and t standard isi equivalent , pvc tape 19mm wide 5 m long make steelgrip anchor kinjal isi equivalent , cable pvc insulated electric cables heavy duty 1100 volts grade multi standard copper conductor of size 1.5 sqmm single core frls confirming to is 1554 , cable pvc insulated electric cables heavy duty 1100 volts grade multi stranded copper conductor of size 4 sqmm single core frls confirming to is 1554 part 1 1988 , pvc casing capping of size 3 oblique 4 medium grade snow white make anchor ssk cona , switch piano 5 amp 230 volts flush type one way snow white make anchor ssk cona isi equivalent , led tube light fittings 15w 230v box type 4 feets with crca body pre coated white and prewired for led tuble complete make havells bajaj philips cromption isi equivalent , screw full thread 6 x 19 mm isi marked 200 nos pkt , pvc switch board snow white size 7 inch x 4 inch for sockets and switches db make supreme polycab finolex isi equivalent , pvc switch board snow white size 8 inch x 10 inch for main switches db make supreme polycab finolex isi equivalent , pvc l bend and t junction joint for pvc casing and capping confirming to is 3419 part 3 make supreme polycab finolex isi equivalent , switch socket combination snow white multipurpose 2 in 1 15 amp 230 volts make anchor ssk cona isi equivalent , service bracket 40mm dia gi tubing medium grade 1.5 mtr long make jindal tata kalinga isi equivalent , cement 43 grade opc packed in hdpe bag each 50 kg wt conforming to is 8112 1989 birla gold ambuja ultratech isi equivalent , coarse sand free from vegatative materials , coarse aggregate 20mm graded , coarse aggregate 40mm graded , hardcore 63 to 90mm , mild steel framed work such as truss rafter purlins and ms plate make tata sail jsw isi equivalent , mild steel bars of size 6 to 8mm dia conforming to is 432 part i 1982 make tata sail jsw isi equivalent , mild steel bars of size 10mm and above dia conforming to is 432 part i 1982 make tata sail jsw isi equivalent , the pre painted galvalume aluminium zinc coating gi based corrugated steel sheet 0.50 mm thick an colour having a tensile strength 550mpa of size 10 feet x 3 feet , the pre painted galvalume aluminium zinc coating gi based plain steel 0.50 mm thick an colour having a tensile strength 550mpa. , mild steel self drilling screw with washer size 3 inch isi marked 100 nos per pkt , anti corrosive red oxide zinc chromate primer confirming to is 5 2004 make berger asian nerolac isi equivalent , synthetic paint enamelled black confirming to is 5 2004 make berger asian nerolac isi equivalent , painting brush 3 inch isi marked , ms nut and bolt of length 100 mm fully thread , ms nut and bolt of length 0.45 m 12 mm dia nuts and washers for fdn bolt , iron welding rod confirming to is 814 2002 isi marked 3.15mm thick 100 nos per pkt , ms binding wire panel radiator: supply of wall mounted steel panel radiators of heat output of 3200 kcal/hr,colour), baked in high gloss finish with and including all necessary fittings as per ne 442 standards , m.s made radiator has both core and tank made of mild steel. the radiator supplied should transfer heat from the fluid inside to the aire outside. the radiator will have thermostat control sensor to control the room temparature, make: eurotherm/maktek/bharat works/isi equivalent., boiler: supply of vertical fire tube boilers (heat output of 50000 kcal/hr) (58.02 kw/hr) with stainless steel dampers. the boiler will run on hsd/kerosene and will be rated as per the heat load calculation. the presure rating should be upto 160 pai. now //bid details 2 / 35

CTN :45499314

20 Jun, 2026 NA

Sonitpur - Assam

Tender For supply of core , ceiling rose three terminal snow white , led bulk head fitting hwith led lamp 10 watts rechargeable , pvc flexible wire copper conductor multi stranded 0 point 0016 oblique 76 , pvc flexible conduit pipe 15 mm dia , pvc round or square block , fire extinguisher of 1 kg capacity comma dry power type along with its accessories , earthing plate 600 x 600 x 6 mm galvanised steel suitable for gi strip fittings , ci earth pit cover of size 300 x 300 x 6 mm with angle iron of size 20x20mm , funnel fitted with 20 mm diameter gi pipe 1 point 5 m long pipe , gi wire 4 mm diameter for earthing , charcoal , salt normal , air termination single pointed aluminium rod 12 mm dia and 300 mm long , testing point terminal block make of gun metal and phosphorus bronze size 75 x 75 x 25 mm drilled , aluminium strips 25 x 3 point 0 mm , galvanised iron strip 32 x 6 mm , insulating pvc block 75x75x30 mm with insulating clamp nut and bolt , study chair of size length 56 cm comma height 82 cm and width 56 cm , study table of size 4 feet x 2 feet wooden top on round tube structure with three drawers on one side , steel almirah of size 1855mm with 4 shelves ms sheet doors and and locker 1 point 00mm thick , mild steel rack adjustable comma sheet 1 point 00mm thick comma overall height 1 point 755m , hand held trolley of size 1200 x 900 x 1200 mm of 2 mm thick ms plateform and size of wheel 127 mm , kassi with handle , black steel sr shovel spade belcha , plaster trowel with wooden handle , showel square nose 14 gauge blade size 310 x 245 mm , plumb bob iron , crow bar 1 point 5 inch dia 4 feet long , hammer 1 kg with wooden handle durmut , hammer 0 point 5 kg with wooden handle durmut , brick line 30 mtr nylon dhaga , traveler brick mason 4 inch 305mm , sprit level , measuring tape 30 mtr steel , water bucket steel 13 inch dia , picks axes with chisel and point ends kudali 14 cp nominal weight 3 point 0 kg , lime brush best quality , painting brush 100mm , hacksaw frame large with blade 05 nos , galvanised iron pan mortar tasla comma 18 gauge 20 inch dia , wooden waterproof plywood thickness 12mm , nails various sizes , rammer earth with handle minimum weight 5 kg without handle , tester for electrician with plastic handle 150mm , electric drill machine heavy duty 500 watt electrical backup with battery and charger , drill bits hss 5mm comma 8mm and 10mm dia for electric drill machine , electric tile cutting machine with interchangable blades 05 nos , electrical sheet cutter machine with blade , puf rivet machine , centre punch 8mm dia best quality , plumbing tool kit , water level pipe 30 mtr long

CTN :45332868

19 Jun, 2026 NA

Sonitpur - Assam

Tender For corrigendum : supply of small store shelter sys room conduit pipe 15 mm dia , pvc round oblique square block , fire extinguisher of one kilogram capacity comma dry power type along with its accessories , earthing plate 600 x 600 x 6 mm galvanised steel suitable for gi strip fittings , ci earth pit cover of size 300 x 300 x 6 mm with angle iron of size 20x20mm comma 3 mm thick with ms frame , funnel fitted with 20 mm diameter gi pipe 1 point 5 m long pipe , gi wire 4 mm diameter for earthing , charcoal , salt normal , air termination single pointed aluminium rod 12 mm dia and 300 mm long , testing point terminal block make of gun metal and phosphorus bronze size 75 x 75 x 25 mm drilled and screwed , aluminium strips 25 x 3 point 00 mm , galvanised iron strip 32 x 6 mm , ci earth pit cover of size 300 x 300 x 6 mm with angle iron of size 20x20mm coma 3 mm thick with ms frame , insulating pvc block 75x75x30 mm with insulating clamp nut and bolt , study chair of size length 56 cm comma height 82 cm and width 56 cm , study table of size 4 feet x 2 feet comma wooden top on round tube structure with three drawers on one side , steel almirah of size 1855mm with 4 shelves ms sheet doors and and locker 1 point 00mm thick , mild steel rack adjustable comma sheet 1 point 00mm thick comma nuts and bolts are in hexagon blck steel , hand held trolley of size 1200 x 900 x 1200 mm of 2 mm thick ms platform , kassi with handle , black steel sr shovel spade belcha , plaster trowel with wooden handle , showel square nose 14 gauge blade size 310 x 245 mm , plumb bob iron , crow bar 1 point 5 inch dia 4 feet long , hammer 1 kg with wooden handle durmut , hammer 0 point 5 kg with wooden handle durmut , brick line 30 mtr nylon dhaga , traveler brick mason 4 inch 305mm , sprit level , measuring tape 30 mtr steel , water bucket steel 13 inch dia , picks axes with chisel and point ends kudali 14 cp nominal weight 3 point 0 kg , lime brush best quality , painting brush 100mm , hacksaw frame large with blade 05 nos , galvanised iron pan mortar tasla comma 18 gauge 20 inch dia , wooden waterproof plywood thickness 12mm , nails various sizes , rammer earth with handle minimum weight 5 kg without handle , tester for electrician with plastic handle 150mm , electric drill machine heavy duty 500 watt electrical backup with battery and charger , drill bits hss 5mm comma 8mm and 10mm dia for electric drill machine , electric tile cutting machine with interchangable blades 05 nos , electrical sheet cutter machine with blade , puf rivet machine , centre punch 8mm dia best quality , plumbing tool kit , water level pipe 30 mtr long

CTN :45505882

20 Jun, 2026 NA

Jabalpur - Madhya Pradesh

Tender For supply of mild steel plate size 5000 (+ /-10) x1200(+ /-10) x10 mm thick. as per is-2062 or latest. , mild steel plate size(2000x1000x20mm thick) or (2500x1250x20 mm thick) . as per is 2062 or latest, (+ , mild steel plate size 2000(+ /-10) x1000(+ /-10) x10 mm thick. as per is- 2062 or latest. , mild steel plate size 2500(+ /-10) x 1250(+ /-10) x 5 mm thick. as per is-2062 or latest. , mild steel sheet size 2500 (+ /-10) x 1250 (+ /-10) x 2.5 mm thick. as per is-1079 or latest. , mild steel angle size: 40(+ /-2) x40(+ /-2) x3(+ /-0.5) mm as per is- 808- 1989 or latest.

CTN :45361483

12 Jun, 2026 NA

Goa - Goa

Tender For corrigendum : supply of stationaory items d d - fevicol 100 gms , paper cutter , paper pin t pin , floor cleaner , paper cutter knife , note pad stick , phenyl , mouse pad , hand wash 500 ml , duster white board , dustbin 5 ltr , colin glass cleaner , plotter bond paper 36 inch , dusting cloth , plotter bond paper 18 inch , door mat , sketch pen , dvd rw , hp cd r-w , battery cell aaa pkt of 10 , pencil cell aa pkt of 10 , cotton towel big , envelop cloth 12x18 , yellow dusting cloth , office call bell , garbage bag pkt of 50 , electric kettle , sponge damper pad , coaster , mosquito machine with refile , blue colour tape , red colour tape , file folder , do letter cover white , drawing pen set make artline , a4 size pad folder , pencil blue , jute yarn sutli , laser pointer , table plain glass 12mm thick , hand towel , pilot pen luxor red , 23a battery , plotter bond paper 24 inch , 24 inch film tracing paper roll , 36 inch film tracing paper roll , vellum paper 36 inch , spiral binding 8mm , spiral binding 10mm , spiral binding 12mm , spiral binding 15mm , spiral binding 18mm , spiral sheet cover a4 , cd writer optical drive make hp , eureka forbes vaccum wet and dry , scrub pad , optical mouse make logitech , optical keyboard make logitech , t scale 36 inch long , set square , tape holder dispenser , table top glass of size 164 x 80 cm , a4 size paper cutter guillotine machine make kent , clip board transparent , foot rest leather , transparent acrylic sheet 90 x 20cm 3mm thick , greeting card awwa , tissue holder , big thermo steel container 2 ltr make milton borosil , invitation card cover white , hdpe pipe 25mm heavy duty , air wick machine , full plate , acrylic name plate , name plate , fertilizer , flag pole15 ft med grade mild steel , handgloves gardener , hand gloves pastic , sum subscription for one year of etabs ultimate v 23 ind , sum subscription for one year of safe //bid details 2 / 66

CTN :45484377

19 Jun, 2026 NA

Ajmer - Rajasthan

Tender For supply of part no 8010 00051 paint rfu enamel ext syn br navey blue , part no 9520 000078 steel angle 25x25x6mm , part no 9530 000043 leaded brass rod round 50mm , part no 9535 000167 copper sheet 1250x60x1 point 60mm , part no 9535 000169 copper sheet 1250x630x2 point 80mm , part no 8305 000230 felt w rot and m proofed 13mm tk 132cm v5 , part no 5330 001897 cork sheet 1 point 6 mm thick , part no 9320 000066 rope asbestors white 25 point 5 mm , part no 5330 005411 jointing sheet 0 point 8 mm thicj 1 point 6mm , part no 5330 005609 gasket cover , part no 5340 009275 anti vibration mount resilent rubber , part no nd ixc mi 2443 203 001 hb suction delivery valve , part no nd ixc mi 34 020 03 0 sealing ring o ring , part no 3439 000167 flux welding aluminium 110 g container , part no 9505 000018 wire steel mild annealed 0point 56 mm * /bid number : gem/2026/b/7638910 + /dated: 09-06-2026 ' ' / bid document 1 / 15

Lp Sheet Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others