Latest lpg burner Tenders | Government lpg burner Tenders

CTN :45609248

06 Jul, 2026 NA

Medchal-T - Telangana

Tender For corrigendum : 1-1/2" inch lpg control valve without actuator , 3/4" inch pilot lpg regulator inlet pressure 7 psi max outlet pressure range 18 to 40 mbar , 1/2" inch pressure balance ratio regulator for lpg service , uv sensor for lpg burner flame detection , dn40 main gas regulator for lpg service 5 bar max inlet pressure outlet pressure range 85-180 mbar , ignition electrode for heater , pilot burner without ignition rod , 1-1/2 inch solenoid valve normally closed auto reset fofc with cpi switch for lpg service 240 volts , dn25 pressure relief valve for lpg service

Central Government/Public Sector

CTN :45710479

17 Jul, 2026 NA

Multi City - West Bengal

Tender For auction sale of depot miscellaneous scrap - scrap/condemned heat treatment furnace no.-6 (multi purpose heating furnace bogie hearth, gas & oil (fired) maximum furnace tempreture 1200*c, normal furnace tempreture 900*c, maximum furnace bath capacity 12 mt, size: 6500 mm (l) x 3000 mm (w) x 1300 mm (h), make/supplier: m/s ferro craft, m&p no. 36 ht 0107. cutting and dismentling allowed. lot is formed as is where as basis.purchasers are advised to inspect the lot before bidding.

Corporations / Associations / Others

CTN :45720484

02 Jul, 2026 16.50 Lacs

Chennai - Tamil Nadu

Tender For supplying new lpg burner and servicing of scrubber, lpg cylinder bank and pump (unit-i) at kannammapet burial ground in division- 141, unit-30, zone-10.

Trust

CTN :45605690

22 Jun, 2026 NA

Shirdi - Maharashtra

Tender For quotation for purchasing spare parts for lp gas boiler...lpg burner m-78, make - united ,lpg burner t-35, make - united ,needle control valve 3/8" make - united - ,burner copper pigtail 3/8" x3/8" x5' ,burner flexible pigtail 3/8" x3/8" x5' ,wire branded flexible pigtail 3/8"x3/8"x5" ,cylinder pressure regulator 3/8" ,cylinder pressure regulator 1/2" ,needle control valve "o" ring ,m-78 burner jet

CTN :45595983

16 Jul, 2026 NA

Visakhapatnam - Andhra Pradesh

Tender For supply, installation, testing and commissioning of oil fired furnaces single chamber, oil fired furnace double chamber, chimney stack, ffo tank, induction heating furnace and portable handheld high frequency induction heat machine

CTN :45525406

22 Jun, 2026 NA

Pondicherry - Pondicherry

Tender For main work : construction of canteen building for the puducherry technological university inside the ptu campus under rusa fund. sub work : providing and fixing of kitchen chimney, gas pipeline connection and kitchen equipment for the canteen building inside the ptu campus under rusa fund (iii call) - ss dosa plate:supply and fabrication of 4 ft 2.5 ft commercial dosa plate, constructed with ss 304 grade outer body (1.2 mm thick) and heavy-duty ms/cast iron plate (12 mm thick), equipped with 3 4 high-pressure lpg burners with individual control valves,complete with oil drain system, splash guard, sturdy ss frame with adjustable legs, and matt finish, suitable for continuous commercial kitchen use. , ss chapati plate:supply and fabrication of 4 ft 2.5 ft commercial chapati plate, constructed with ss 304 grade outer body (1.2 mm thick) and heavy-duty ms/cast iron plate (12 mm thick), equipped with 3 4 high-pressure lpg burners with individual control valves, complete with oil drain system, splash guard, sturdy ss frame with adjustable legs, and matt finish, suitable for continuous commercial kitchen use., chimney with ducting & blower:supply, fabrication, and installation of 10 feet long commercial kitchen chimney (exhaust hood) made of ss 304 grade (1.0 1.2 mm thickness), rectangular type with ss baffle filters and oil collection tray, connected with 150 sq.ft gi ducting (0.6 0.8 mm thickness), complete with 2 hp heavy-duty centrifugal exhaust blower (3-phase, 1440 rpm), mounted on ms angle support structure, including all necessary fittings, clamps, bends, hangers, and electrical connections, suitable for continuous commercial kitchen operation, bain marie (7 compartment):supply and installation of 7-compartment commercial bain marie unit, fabricated in ss 304 grade (1.0 1.2 mm thickness), complete with 7 nos. gn pans with lids, fitted with 3 kw electric heating element (230v, single phase), thermostatcontrolled water bath heating system, and sturdy ss/ms support structure with adjustable legs, including water tank and drain arrangement, suitable for continuous commercial kitchen and buffet operations., working table with 1 under shelf:supply and fabrication of 4 ft 2 ft working table (vegetable cutter table) made of ss 304 grade (1.0 1.2 mm thickness), complete with one under shelf (u/s), heavy-duty ss square pipe frame, reinforced top with machine mounting provision, and adjustable legs, suitable for vegetable cutting and food preparation in commercial kitchens, gas rice steamer (20 kg):supply and installation of 20 kg capacity gas rice steamer, fabricated in ss 304 grade (1.0 1.2 mm thickness), double-wall insulated type, complete with heavy-duty perforated rice vessel, high-efficiency lpg gas burner, pressure control system, steam outlet, and sturdy ms/ss stand, suitable for continuous commercial kitchen operation., ss rack (4 tier): supply and fabrication of 4-tier stainless steel rack of size 35" 14" 48", made of ss 304 grade (1.0 1.2 mm thickness), complete with four shelves, heavy-duty ss square pipe frame, adjustable legs, and smooth polished finish, suitable for storage of utensils, provisions, and kitchen materials in commercial kitchens., copper gas pipeline:supply, installation, testing, and commissioning of copper gas pipeline system suitable for commercial kitchen, using 3/4 inch main line and 1/2 inch branch lines, complete with all necessary fittings, isolation valves for each equipment, pressure regulator, nrv, and flexible hose connections, properly supported and leak-tested, suitable for lpg gas supply to dosa plate, chapatti plate, rice steamer and gas stove units.

Central Government And Public Sector

CTN :45406279

15 Jun, 2026 NA

Bangalore - Karnataka

Tender For " j type thermocouple duplex mineral insulated for working temperature of 600 deg continuous.hot juction ungrounded.the length of the thermocouple 1000mm with adjustable flange. the inner and outer sheath of the thermocouple shall be ss 304. the dimension of the outer sheath id12 +/-1mm,od 21 +/- 1mm. the thermocouple element size shall be not less than 1mm. the thermocouple shall be suitable to use in oil fired furnace (hsd).the accuracy of the thermocuople shall be +/- 3 deg c upto 400 deg c,+/-0.75% above 400 deg c. the thermocouple shall be supplied along with calibrationcertificate from the laboratory accredited to the national standards and the calibration point shall be at 300 deg c, 400 deg c, 500 deg c,600 deg c and 650 deg c.warranty:6months from the date of installation or 12 months from the date of supply against any manufacturing defects." [ warranty period: 12 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45220341

25 May, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of depot miscellaneous scrap - cond & u/s oil fired furnace/ oil furnace of -2, of-3, of-4 in as is where is condition.custodian: sse/mw/ews/ajj. advice note nos: 016305-25-00134 dt 07.11.25, 016305-25-00139 dt 22.11.25. location: bs shop/ews/ajj.note: 1.dismantlingh and crane /jcb/forklift loading is permitted. 2.while cutting necessary precautions should be made. approx lot weight: 3350 kgs.pl no 98322000

CTN :45244477

25 May, 2026 NA

Pondicherry - Pondicherry

Tender For providing and fixing of kitchen chimney gas poipeline connection and kitchen equipments for the canteen building inside the ptu campus under rusa fund - ss dosa plate:supply and fabrication of 4 ft 2.5 ft commercial dosa plate, constructed with ss 304 grade outer body (1.2 mm thick) and heavy-duty ms/cast iron plate (12 mm thick), equipped with 3 4 high-pressure lpg burners with individual control valves,complete with oil drain system, splash guard, sturdy ss frame with adjustable legs, and matt finish, suitable for continuous commercial kitchen use. , ss chapati plate:supply and fabrication of 4 ft 2.5 ft commercial chapati plate, constructed with ss 304 grade outer body (1.2 mm thick) and heavy-duty ms/cast iron plate (12 mm thick), equipped with 3 4 high-pressure lpg burners with individual control valves, complete with oil drain system, splash guard, sturdy ss frame with adjustable legs, and matt finish, suitable for continuous commercial kitchen use., chimney with ducting & blower:supply, fabrication, and installation of 10 feet long commercial kitchen chimney (exhaust hood) made of ss 304 grade (1.0 1.2 mm thickness), rectangular type with ss baffle filters and oil collection tray, connected with 150 sq.ft gi ducting (0.6 0.8 mm thickness), complete with 2 hp heavy-duty centrifugal exhaust blower (3-phase, 1440 rpm), mounted on ms angle support structure, including all necessary fittings, clamps, bends, hangers, and electrical connections, suitable for continuous commercial kitchen operation, bain marie (7 compartment):supply and installation of 7-compartment commercial bain marie unit, fabricated in ss 304 grade (1.0 1.2 mm thickness), complete with 7 nos. gn pans with lids, fitted with 3 kw electric heating element (230v, single phase), thermostatcontrolled water bath heating system, and sturdy ss/ms support structure with adjustable legs, including water tank and drain arrangement, suitable for continuous commercial kitchen and buffet operations., working table with 1 under shelf:supply and fabrication of 4 ft 2 ft working table (vegetable cutter table) made of ss 304 grade (1.0 1.2 mm thickness), complete with one under shelf (u/s), heavy-duty ss square pipe frame, reinforced top with machine mounting provision, and adjustable legs, suitable for vegetable cutting and food preparation in commercial kitchens, gas rice steamer (20 kg):supply and installation of 20 kg capacity gas rice steamer, fabricated in ss 304 grade (1.0 1.2 mm thickness), double-wall insulated type, complete with heavy-duty perforated rice vessel, high-efficiency lpg gas burner, pressure control system, steam outlet, and sturdy ms/ss stand, suitable for continuous commercial kitchen operation., ss rack (4 tier): supply and fabrication of 4-tier stainless steel rack of size 35" 14" 48", made of ss 304 grade (1.0 1.2 mm thickness), complete with four shelves, heavy-duty ss square pipe frame, adjustable legs, and smooth polished finish, suitable for storage of utensils, provisions, and kitchen materials in commercial kitchens., copper gas pipeline:supply, installation, testing, and commissioning of copper gas pipeline system suitable for commercial kitchen, using 3/4 inch main line and 1/2 inch branch lines, complete with all necessary fittings, isolation valves for each equipment, pressure regulator, nrv, and flexible hose connections, properly supported and leak-tested, suitable for lpg gas supply to dosa plate, chapatti plate, rice steamer and gas stove units.

Central Government And Public Sector

CTN :44932409

26 May, 2026 NA

Bangalore - Karnataka

Tender For corrigendum : " j type thermocouple duplex mineral insulated for working temperature of 600 deg continuous.hot juction ungrounded.the length of the thermocouple 1000mm with adjustable flange. the inner and outer sheath of the thermocouple shall be ss 304. the dimension of the outer sheath id12 +/-1mm,od 21 +/- 1mm. the thermocouple element size shall be not less than 1mm. the thermocouple shall be suitable to use in oil fired furnace (hsd).the accuracy of the thermocuople shall be +/- 3 deg c upto 400 deg c,+/-0.75% above 400 deg c. the thermocouple shall be supplied along with calibrationcertificate from the laboratory accredited to the national standards and the calibration point shall be at 300 deg c, 400 deg c, 500 deg c,600 deg c and 650 deg c.warranty:6months from the date of installation or 12 months from the date of supply against any manufacturing defects." [ warranty period: 12 months after the date of delivery ]

Lpg Burner Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Corporations / Associations / Others

Trust

Central Government And Public Sector

Central Government/Public Sector

Central Government And Public Sector