Latest lpg dispensing station Tenders | Government lpg dispensing station Tenders

Central Government/Public Sector

CTN :45475139

01 Jul, 2026 10.00 Lacs

Faizabad - Uttar Pradesh

Tender For repair/maintenace of water supply assets such as submersible/, centrifugal /monoblock pump set, submersible cable and connected accessories in pumping installation at ayodhya cantt under age(i) ayodhya

State Government

CTN :45401196

12 Jun, 2026 1.04 Crore

Kangra - Himachal Pradesh

Tender For restoration of rain damages lwss sakri jalakh in tehsil haripur distt. kangra (hp)(sh:- c/o pump house rcc collection tank 35000 ltr. providing laying jointing and testing of r/main 80 mm dia and 100 mm dia , s/e of submersible and centrifugal pumping machinery with its allied accessories and c/o thrust block )(under pdna)

State Government

CTN :45445001

24 Jun, 2026 60.00 Lacs

Jummu - Jammu And Kashmir

Tender For installation of electro-mechanical equipment at cps muthi for water supply to durga nagar. - h.c pumping units-2no-providing, installation, testing and commissioning of 50000 gph x 150 mtrs. head (02 no.s) horizontal centrifugal split casing pump with slow peed motor at cps muthi by way of excavation of earth work for laying of rcc foundation block. the job includes construction of foundation block for installation of 50000 gph x 150 mtrs. hend horizontal centrifugal pump set at cps muthi. by way of dismantling of old foundation blocks with the help of required tool and tackle and manual labour as per site requirement. disposing off the excavated material from the site to distance of at least 0.50 km with the help of manual labour and mechanical transport. job includes digging of pit of size 6x3.5x4and disposal of excavated material from the site of the work to the place of dumping. providing/lying of rcc foundation block of size 5x3.5x5(labove the ground level) in 1:2:3 cement concrete mix having requisite reinforcement with 12 mm dia. tor steel from center to center with proper spacing. fabrication and fitting of foundation bolts duly welded with cross members and threading at top with nut. foundation bolt shall be welded with tor steel and firmly grouted in the cement concrete mix, plastering and finishing from outside: fitting of base frame plate on the top of the block and leveling it both horizontally as well as vertically. strengthening of the base frame by providing and welding of m. s. channel cross members of required size and as per the size of frame for giving extra strength against vibration of the unit and on full load running conditions. complete job includes cost of material and labour charges for laying of the foundation block, plastering and finishing. placing horizontal centrifugal pumping unit on the base frame by using hydra crane, chain block, manual labour and other tools and tackles. leveling of the pump and motor properly on the base frame and coupling them by fitting of the m.s. coupling bolts with nuts rubber bushes and m.s. fasteners required for horizontal centrifugal pumping unit base connections with base frame job includes cost of material, carriage of machinery and allied materials to the site of work, loading/unloading and allied charges.suction line: fabrication of suction line by providing / fabrication of ms pipe of dia 150 mm. of length as per site requirement (09 mtr approx.) proper beveling of ms pipe for v-butt welding joints. the job includes providing and. fabrication of ms bends of 150 mm dia out of ms pipe 150 mm dia. providing/fabrication / fitting of ms flanges-4no wherever required and with the one flange compatible to be fitted the suction flange of both the pumps. job includes providing and fabrication of ms bends of 150 mm dia -04 no. the job also includes providing and fitting of sluice valves of 150 mm dia. (cs material)- 02no.(01 no.for each suction line of 02 pump sets) on suction lines. providing, fabrication and fitting of ms flanges at both end of sluice valve as per site requirement.delivery line: fabrication of delivery line by providing and fabrication of ms pipe 125 mm. upto manifold. proper beveling of ms pipes for v-butt welding joint. job includes fabrication/fitting of ms pipe 125 mm dia. upto manifold. job also involves making interconnection with manifold with the delivery flange of newly installed pumps. the job involves fabrication/fitting of ms bends as per site requirement no-02 out of 125 mm dia. ms pipe. fabrication of 04 no. ms flange of 125 mm dia. to match delivery flange of the pump and welding of flange with one end of the bend. makes interconnection of manifold with delivery pipe. job also includes providing/fitting of sluice valve (cs)-2no and reflux valve of 125mm-2no (cs material) on delivery side of each pumpset by the way of welding for on delivery line. all the welding work shall have to executed butt pre heated high pressure welding electrod

CTN :45465748

15 Jun, 2026 10.85 Lacs

Multi City - Haryana

Tender For providing and fixing of 100bhp centrifugal pumping set at sector 37 disposal in ward 9(new) under mc gurugram (withdrawal from agency)re-call

CTN :45441181

11 Jun, 2026 12.65 Lacs

Multi City - Haryana

Tender For providing and fixing of 100 bhp centrifugal pumping set at sushant lok 3 in ward 14, division-1b under mcg. (re-call)

State Government

CTN :45401958

09 Jun, 2026 17.79 Lacs

Hisar - Haryana

Tender For annual maintenance estimate for main water works tosham road hisar (2026-2027) - annual maintenance of main water works tosham road hisar (2026-2027). “supplying, erection, testing and commissioning of horizontal centrifugal split casing pumping set of 2 nos. 6800 lpm 40 hp pump set and 3400 lpm pump set with motors including copper cable and control panels at main water works tosham road hisar and all other works contingent thereto” (including three years maintenance and defect liability period free of cost) a/c rs 17.80 lacs

State Government

CTN :45415330

15 Jun, 2026 2.52 Crore

Una-Hp - Himachal Pradesh

Tender For - source level augmentation of leftout water supply schemes to mata shree chintpurni ji temple area in chintpurni constituency tehsil amb distt una (h.p) "(mata ka baag) sub head:- construction of pump house cum chowkidar room, over head storage tank,construction of boundary walls around the pump house,excavation ,providing,laying,jointing and testing of rising main pipe ,providing and installation of centrifugal pumping machinery alongwith its all allied accessories complete etc.

State Government

CTN :45415279

09 Jun, 2026 NA

Ramgarh - Jharkhand

Tender For rate for supply installation and commissioning of pump set and its accessories at different ramgarh rural water supply pumping plant schemes . - cost towards supply, installation and commissioning of horizontal split case centrifugal pump set of make mather and platt/ kirlosker/ wpil/ jyoti with bronze/ ss impeller , coupled with suitable tefc squirrel cage induction motor make kirloskar / jyoti /crompton/abb make and mounted on a common ms base plate, operated on 415 volt 10%, 3 phase 50 hz. a.c supply having suitable 1480 rpm, along with suitable nr valve - 1 no , sluice valve-2 no., foot valve- 1 no., pressure gauge etc. all complete. 1.1. capable of discharging 70.56 m3/hr at a head of 68 mtrs, cost towards supply, installation and commissioning of horizontal split case centrifugal pump set of make mather and platt/ kirlosker/ wpil/ jyoti with bronze/ ss impeller , coupled with suitable tefc squirrel cage induction motor make kirloskar / jyoti /crompton/abb make and mounted on a common ms base plate, operated on 415 volt 10%, 3 phase 50 hz. a.c supply having suitable 1480 rpm, along with suitable nr valve - 1 no , sluice valve-2 no., foot valve- 1 no., pressure gauge etc. all complete. 1.2.capable of discharging 180 m3/hr at a head of 45 mtrs, cost towards supply, installation and commissioning of horizontal split case centrifugal pump set of make mather and platt/ kirlosker/ wpil/ jyoti with bronze/ ss impeller , coupled with suitable tefc squirrel cage induction motor make kirloskar / jyoti /crompton/abb make and mounted on a common ms base plate, operated on 415 volt 10%, 3 phase 50 hz. a.c supply having suitable 1480 rpm, along with suitable nr valve - 1 no , sluice valve-2 no., foot valve- 1 no., pressure gauge etc. all complete. 1.3. capable of discharging 38 m3/hr at a head of 32 mtrs, cost towards supply, installation and commissioning of horizontal split case centrifugal pump set of make mather and platt/ kirlosker/ wpil/ jyoti with bronze/ ss impeller , coupled with suitable tefc squirrel cage induction motor make kirloskar / jyoti /crompton/abb make and mounted on a common ms base plate, operated on 415 volt 10%, 3 phase 50 hz. a.c supply having suitable 1480 rpm, along with suitable nr valve - 1 no , sluice valve-2 no., foot valve- 1 no., pressure gauge etc. all complete. 1.4. capable of discharging 49 m3/hr at a head of 55 mtrs, cost towards supply, installation and commissioning of horizontal split case centrifugal pump set of make mather and platt/ kirlosker/ wpil/ jyoti with bronze/ ss impeller , coupled with suitable tefc squirrel cage induction motor make kirloskar / jyoti /crompton/abb make and mounted on a common ms base plate, operated on 415 volt 10%, 3 phase 50 hz. a.c supply having suitable 1480 rpm, along with suitable nr valve - 1 no , sluice valve-2 no., foot valve- 1 no., pressure gauge etc. all complete. 1.5 capable of discharging 23 m3/hr at a head of 90 mtrs, cost towards supply, installation and commissioning of horizontal split case centrifugal pump set of make mather and platt/ kirlosker/ wpil/ jyoti with bronze/ ss impeller , coupled with suitable tefc squirrel cage induction motor make kirloskar / jyoti /crompton/abb make and mounted on a common ms base plate, operated on 415 volt 10%, 3 phase 50 hz. a.c supply having suitable 1480 rpm, along with suitable nr valve - 1 no , sluice valve-2 no., foot valve- 1 no., pressure gauge etc. all complete. 1.6 capable of discharging 21 m3/hr at a head of 60 mtrs, cost towards supply, installation and commissioning of horizontal split case centrifugal pump set of make mather and platt/ kirlosker/ wpil/ jyoti with bronze/ ss impeller , coupled with suitable tefc squirrel cage induction motor make kirloskar / jyoti /crompton/abb make and mounted on a common ms base plate, operated on 415 volt 10%, 3 phase 50 hz. a.c supply having suitable 1480 rpm, along with suitable nr valve - 1 no , sluice valve-2 no., foot valve- 1 no., pressure gauge etc. all com

CTN :44615954

16 Jun, 2026 NA

Mumbai - Maharashtra

Tender For corrigendum : supply, installation, testing and commissioning of trimmer pump along with accessories at 900 mld ps bc - the work of design, supply, installation, testing and commissioning of 3437.5 m³/h capacity centrifugal pump set along with other accessories at 900 mld pumping station, bhandup complex.

State Government

CTN :45374671

08 Jun, 2026 92.24 Lacs

Ranchi - Jharkhand

Tender For supplying, installation, commissioning and testing of horizontal split casing centrifugal pump set having discharge 2030 m3 per hr at total head of 122 meters with all its components for rukka pumping plant under d.w.and s. mechanical urban division,

Lpg Dispensing Station Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

State Government

State Government

State Government

State Government

State Government