Get complete information related to latest Lpg Pump Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Lpg Pump Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Lpg Pump Tenders.
Tender For supply of electric pumping sets, bare pump only model no lhc 150 440-2 to replace defective pump and to couple with lubi make induction motor at garia dam pump only 313m3/hour@100 mtr, suction discharge-200 150, suitable motor hp/kw 180.0/134.0 make- lubi only [ warranty period: 30 months after the date of delivery ] ]
Tender For supply of pump & pump spares injection pump no.4 make : varun model: dbv 250/32 a , impeller s.s 304 , spares for kirloskar make juice sulphiter pump make:- kpd150/43 discharge :- 90m /hr total head :- 50 mtr , s.s 304 casing cover plate , vapour line juice heater kpd 40/32 make :- kirloskar , c.i casing cover plate , semi kastner condensate water pump make :- sintech model cp 100/400 capacity 150 mtr , s.s 304 impeller , syrup pump bnc 65/32 , c.i housing with both side oil seal cover complete , pump spare for rota type pump make:- gita, model :- 10rmg size:- 250 x 250mm , cast iron rotor is:210 fg 260 o.d of rotor - 360 mm bore of rotor - 76 mm width of rotor 375 mm , pump spare for rota type pump make:- gita, model :- 8rmg size:- 200 x 200mm , cast iron rotor is:210 fg 260 o.d of rotor - 305 mm bore of rotor - 75 mm width of rotor 325 mm , sulphuric acid transfer bare pump: model: pvdf160r suction/discharge:50x40mm rpm:2900,with mechanical seal face gft bellow ceramic shaft en-8 suitable for 98% concentration sulphuric acid technical data sheet will be provided with technical bid , sdg out let shaft pump model: kpd 65/32 capacity: 30m3/hr head: 20m moc: ci (casing & impeller), shaft- ss410 gland packed suitable for sdg outlet technical data sheet will be provided with technical bid
Tender For supply of 27.62.86.727.5 - bare pump of 144p 120 a b swelore , 27.62.84.752.5 - bare pump of 146 p 105 a b swelore , 27.62.54.903.5 - bare pump of 144p 124 a b swelore , 27.62.42.764.5 - bare pump of 144p 118 a b swelore , 27.62.47.001.5 - plunger swelore wh 1125 22 la826sab22m10 , 27.00.01.068.5 - corrossion inhibitor pump 62np105ab , 27.62.52.944.5 - base frame swelore wdd 5000 60 60 60
Tender For providing gi pipes class b marked with is: 1239 in 3.05 m length, their threading and welding with flanges (heavy duty) on both sides, jointing with nuts and bolts ( w make), rubber gaskets , lowering into tube wells and testing including carriage, loading, unloading etc. complete in all respects to the satisfaction of engineer-in- charge. 3. 80 mm i/d , installation of shallow/medium/deep tubewells as per is 2800:1991 development of tube well according to clause 9.3 of is: 2800-1991 (part-i) as amended up to date and specifications attached and as directed by the engineer-in-charge of the work including the cost of all consumable stores, fuel, oil, compressors, pumps and machinery etc. as required for the work. 1. compressor 450cfm x 250 psi ,supply and jointing three core submersible flat cables of approved make with bare bunched copper conductor insulated and sheathed with pvc for submersible pump motors /fountain lights etc with voltage grade 1100 volts marked with is:694, 1990 including cost of jointing, materials as well as carriage, loading, unloading etc. complete in all respect up to the entire satisfaction of engineer- in-charge. submersible copper cable 3 core 10 sqmm
Tender For fixing of c.i. valves hydrants extra for fixing sluice valves/flap valves socketed or flanged including cartage from stores or nearest railway station to site of works 1. 80 mm i/d, fixing of c.i. valves hydrants extra for fixing sluice valves/flap valves socketed or flanged including cartage from stores or nearest railway station to site of works 2. 100 mm i/d ,fixing of c.i. valves hydrants providing and fixing cast iron double flanged swing check type reflux (non return) valves pn-1.6 marked with is:5312 including nuts and bolts marked with is:1363, rubber sheet marked with is:638 etc., carriage loading, unloading, stacking, handling, re-handling etc. complete in all respect to the satisfaction of engineer-incharge 2. 100 mm i/d ,ilter media providing gi pipes class b marked with is: 1239 in 3.05 m length, their threading and welding with flanges (heavy duty) on both sides, jointing with nuts and bolts ( w make), rubber gaskets , lowering into tube wells and testing including carriage, loading, unloading etc. complete in all respects to the satisfaction of engineer-in- charge. 3. 80 mm i/d ,supply and jointing three core submersible flat cables of approved make with bare bunched copper conductor insulated and sheathed with pvc for submersible pump motors /fountain lights etc with voltage grade 1100 volts marked with is:694, 1990 including cost of jointing, materials as well as carriage, loading, unloading etc. complete in all respect up to the entire satisfaction of engineer- in-charge. submersible copper cable 3 core 10 sqmm
Tender For providing gi pipes class b marked with is: 1239 in 3.05 m length, their threading and welding with flanges (heavy duty) on both sides, jointing with nuts and bolts ( w make), rubber gaskets , lowering into tube wells and testing including carriage, loading, unloading etc. complete in all respects to the satisfaction of engineer-in- charge. 3. 80 mm i/d , installation of shallow/medium/deep tubewells as per is 2800:1991 supplying erection, testing of fully automatic electric control panel board for t/wells in pump chamber consisting of ms sheet of thickness 14 gauge duly painted box type floor mounted made of angle frame containing 1 no. fully automatic air brake starter suitable for motor of the following capacity, min switch of suitable range with hrc fuse, 1 no. volt meter (0 to 500 volts), 1 no. amp. meter of 0 to 100 amp. 3 sets of indicating lamp capacitor of suitable capacity and 1 no. single phase preventers with the timer switch including wiring in panel board and suitable electric energy meter wiring in electric control panel board complete in all respect as per specification given in schedule no. ii, including mcb, suitable, capacitor, wooden box etc as per site requirement complete in all respect. 5. 30 hp motor ,. supply and jointing three core submersible flat cables of approved make with bare bunched copper conductor insulated and sheathed with pvc for submersible pump motors /fountain lights etc with voltage grade 1100 volts marked with is:694, 1990 including cost of jointing, materials as well as carriage, loading, unloading etc. complete in all respect up to the entire satisfaction of engineer- in-charge. submersible copper cable 3 core 10 sqmm
Tender For providing gi pipes class b marked with is: 1239 in 3.05 m length, their threading and welding with flanges (heavy duty) on both sides, jointing with nuts and bolts ( w make), rubber gaskets , lowering into tube wells and testing including carriage, loading, unloading etc. complete in all respects to the satisfaction of engineer-in- charge. 3. 80 mm i/d , supply and jointing three core submersible flat cables of approved make with bare bunched copper conductor insulated and sheathed with pvc for submersible pump motors /fountain lights etc with voltage grade 1100 volts marked with is:694, 1990 including cost of jointing, materials as well as carriage, loading, unloading etc. complete in all respect up to the entire satisfaction of engineer- in-charge. submersible copper cable 3 core 6 sqmm
Tender For fixing of c.i. valves hydrants extra for fixing sluice valves/flap valves socketed or flanged including cartage from stores or nearest railway station to site of works 2. 100 mm i/d ,providing gi pipes class b marked with is: 1239 in 3.05 m length, their threading and welding with flanges (heavy duty) on both sides, jointing with nuts and bolts ( w make), rubber gaskets , lowering into tube wells and testing including carriage, loading, unloading etc. complete in all respects to the satisfaction of engineer-in- charge. 3. 80 mm i/ ,development of tube well with pump of suitable rating to that full satisfaction and as directed by the engineer-in-charge , miscellaneous items 1.5. supply and jointing three core submersible flat cables of approved make with bare bunched copper conductor insulated and sheathed with pvc for submersible pump motors /fountain lights etc with voltage grade 1100 volts marked with is:694, 1990 including cost of jointing, materials as well as carriage, loading, unloading etc. complete in all respect up to the entire satisfaction of engineer- in-charge. submersible copper cable 3 core 10 sqmm
Tender For supply and jointing three core submersible flat cables of approved make with bare bunched copper conductor insulated and sheathed with pvc for submersible pump motors /fountain lights etc with voltage grade 1100 volts marked with is:694, 1990 including cost of jointing, materials as well as carriage, loading, unloading etc. complete in all respect up to the entire satisfaction of engineer- in-charge. submersible copper cable 3 core 10 sqmm