Web Analytics Made Easy - StatCounter

Lt Box Tenders

Get complete information related to latest Lt Box Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Lt Box Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Lt Box Tenders .

Filter
Loading....
Loading....
Loading....
Loading....
Loading....

Bid Submission Date Range
Tender Value

Central Government/Public Sector

CTN :45713835 Due date: 18 Jul, 202618 Jul, 2026 30.00 Lacs
Tender For repair/replacement of external electric supply distribution network with other connected items at malad, marve and kandivali under ge (n) santacruz, mumbai - supply, install, testing & commissioning pedestal cubical type double door lt bus bar chamber box of suitable size factory made modular construction fabricated out of 3 mm thick crca sheet, angle iron, channels, epoxy powder coated to give a superior finish , outdoor type , totally enclosed dust & vermin proof with locking arrangements front & back side opening system including rain shed, busbar chamber should be suitable for accomodating all aluminium bus bar strips (50mm x 10mm x 04 nos) & gi strip for earth fixed on porcelain insulators, and one independent metering module suitable for accomodating three phase volt meters & ammeter digital type, indicator lamps, cable entry/exits cut outs at bottom part, with fixing arrangement on pcc (1:3:6) type c-2 bed block with studs, bolts, nuts & washers, danger notice board with scull suitable for 415 volts or required size to be fixed on pannel including dismantling of old bus bar panel all as specified and directed by engr-in charge.notes:-(a) aluminium bus bar duly covered with colour coded shrinkable sleeves of required size for phases and neutral - 01 set(b) mccb 4 pole , ics=100%icu- 25 ka, 415 volts, 100 amps , with thermal adjustable and fixed magnetic setting with extended terminals -02 nos.(c) digital multifunction meter of size 96x96 mm to measure current, voltage, frequency and power factor with built in selector switch and programable ct of appropriate ratio.-01 no make- imp/automatic electrical(ae)/ l&t / havells/ meco(d) panel indicating lamp neon/led type (red ,yellow & blue) with lamp holders - 03 nos(e) panel instrumental wiring with frls suitable size but not less than 2.5 sqmm copper wire single core - 01 job(f) necessary sizes of lugs for fixing of cables in bus bar deemded to be included rate quoted by the contractor.make of mccb & mcb: larsen &toubro/ abb/ siemens/ schneider/ havells/ legrand/ indo asian/ c & s electric/ bhartia cuttler hammer (bch)/benlo, supply & fixing mccb 4 pole 36 ka 400 amp with adjustable thermal & adjustable magnetic setting, including taking down old unserviceable mccb, all as specified and directed by engr-in-charge. make:- larsen &toubro/ abb/ siemens/ schneider/ havells/ legrand/ indo asian/ c & s electric/ bhartia cuttler hammer (bch)/benlo, supply & fixing mccb 4 pole 36 ka 160 amp with adjustable thermal & adjustable magnetic setting, including taking down old unserviceable mccb, all as specified and directed by engr-in-charge. make:-larsen &toubro/ abb/ siemens/ schneider/ havells/ legrand/ indo asian/ c & s electric/ bhartia cuttler hammer (bch)/benlo, supply & fixing mccb 4 pole 16 ka 100 amp with adjustable thermal & adjustable magnetic setting, including taking down old unserviceable mccb, all as specified and directed by engr-in-charge. make:-larsen &toubro/ abb/ siemens/ schneider/ havells/ legrand/ indo asian/ c & s electric/ bhartia cuttler hammer (bch)/benlo, supply & fixing mccb 4 pole 36 ka 250 amp with adjustable thermal & adjustable magnetic setting, including taking down old unserviceable mccb all as specified and directed by engr-in-charge make:-larsen &toubro/ abb/ siemens/ schneider/ havells/ legrand/ indo asian/ c & s electric/ bhartia cuttler hammer (bch)/benlo, supplying, laying,connecting, testing & commissioning lt ug pvc insulated, heavy duty, 1100 v grade electric cable with aluminium conductor of size 16 sqmm x 4 core, laid in trenches or passing through pipe or fixed to wall, making all connections with and including provision of necessary glands, lugs, bushing etc as required including taking down old unserviceable cable complete all as specified and as directed by engineer-in-charge of following sizes:-note : earthwork excavation, dwc

corporations/Associations/Others

CTN :45683923 Due date: 09 Jul, 202609 Jul, 2026 NA
Tender For auction sale of 25kva transformer with winding & without oil,63kva transformer with winding & without oil,100kva transformer with winding & without oil,ms iron material,released steel from rcc poles skeleton etc.,,angle iron material, lt protection kit & scrap ab cable,single phase meter qty:182 nos,scrap 2/4/rabbit conductor & rabbit acsr conductor,ht metering cubical box,ct & pts,secure meters

State Government

CTN :45587069 Due date: 02 Jul, 202602 Jul, 2026 20.00 Lacs
Tender For supply of safe carriage of 8.5 m long pcc , safe carriage of 11 m long pcc , safe carriage of 9 m long stp , safe carriage of 11 and 13 m long stp , safe carriage of line material , safe carriage of xlpe cable , safe carriage of 11 kv ct pt pole mounting , safe carriage of 10 and 16 kva tf , safe carriage of 25 and 63 kva tf , safe carriage of 100 kva tf , etection of 8.5 m long pcc single support , etection of 9 m long stp single support , etection of 11 and 13 m long stp single support , etection of 11 m long pcc single support , etection of 8.5 m long pcc double pole section pole , etection of 11 m long pcc double pole section pole , etection of 11 and 13 m long stp double pole with tpmo etc , laying sagging of dog conductor , laying sagging of acsr weasel conductor , laying sagging of lt xlpe cable , laying sagging of 11 kv xlpe cable , laying sagging of ab cable , fixing of stay rod , fixing of 3 phase distribution box , erection of 11 kv ct pt pole mounting unit , installation of 11 kv pilfer metering cubical , providing and fixing of suspension clamp , providing and fixing of nut bolts off size , providing and fixing of lt shackle insulator , providing and fixing of dead end clamp , providing and fixing of stone pad , providing and fixing of danger board , providing and fixing of barbed wire , providing and fixing of number plate , fixing of joint kit outdoor , fixing of joint kit indoor , mounting of 10 and 16 kva tf , mounting of 25 and 63 kva tf , mounting of 100 kva tf , earthing of pcc pole stp dt , new guarding of ht lines with gi wire , carriage of acsr dog weseal conductor scrap , carriage of line material scrap , carriage of st pole scrap * /bid number : gem/2026/b/7664537 + /dated: 17-06-2026 ' ' / bid document 1 / 30

State Government

CTN :45292364 Due date: 20 Jun, 202620 Jun, 2026 10.00 Lacs
Tender For corrigendum : supply of safe carriage of pcc pole , safe carriage of st pole , cartage of line material , erection of pcc pole , erection of st pole , erection of doubel pcc pole , erection of stay set , erection of earthing rod , safe carriage of xlpe cable , erection of cable , erection of xlpe cable , erection of conductor , erection of ab cable , erection of tf , safe carriage of 11 kv pilfer proof metering cubicle , erection of 11 kv pilfer proof metering cubicle , guarding of 11 kv line , cutting and chopping of tree , providing and fixing of dp clamps , safe carriage of 11 kv ct pt , erection of 11 kv ct pt , safe carriage of lt distribution box , fencing of 250 kva tf , plinth of 250 kva tf , safe carriage and installation of 250 kva tf , providing and fixing of nut bolt , providing and fixing of holding clamps , safe carriage and installation of 11 kv pilfer proof cubical

State Government

CTN :45260557 Due date: 15 Jun, 202615 Jun, 2026 56.51 Lacs
Tender For corrigendum : supply of carriage and erection of 11kv by 400v transformer 250 kva , carriage and erection of 11kv by 400v transformer 25 kva , carriage and erection of pcc pole 8 and half meter , carriage and erection of lt xlpe cable al 3 and half into 400 sq mm , carriage and erection of lt abc 3 into 95 plus 1 into 70 plus 1 into 16 sqmm , carriage and erection of lt abc 3 into 50 plus 1 into 35 plus 1 into 16 sqmm , carriage and erection of acsr weasel conductor , carriage and erection of earthing of pole by ms earthing rod of 20 into 2500 mm , carriage and erection of 11 kv stay set complete 16 into 1800 mm , carriage and erection of 11 kv pin insulator polymeric , carriage and erection of 11 kv tpmo with polymer insulator , carriage and erection of 11 kv polymeric disc insulator t and c type 45 kn , carriage and erection of 11 kv disc fitting tandc type 45 kn , carriage and erection of lt distribution box three phase , carriage and erection of plinth , carriage and erection of fencing , carriage and erection of water level earthing , supply and carriage and erection of dp holding clamps for top channel tpmo and fuse set , supply and carriage and erection of stone pad , supply and carriage and erection of concreting of pole , supply and carriage and erection of concreating stay , supply and carriage and erection of danger board , supply and carriage and erection of barbed wire including jumper , supply and carriage and erection of henley type tailless unit protection cubical pannel , supply and carriage and erection of copper l piece 50 into 225 into 10 mm ls , supply and carriage and erection of copper l piece 62 into 225 into 12 mm ls , supply and carriage and erection of al leg long barrel of size ls , supply and carriage and erection of ms channel dropper 100 into 50 into 2028 mm for fuse set , supply and carriage and erection of ms top channel 125 into 65 into 2240 mm , supply and carriage and erection of ms channel 125 into 65 into 1300 mm toff , supply and carriage and erection of 11 kv fuse set , supply and carriage and erection of lt pvc cable 4 into 16 sqmm , supply and carriage and erection of lt pvc cable 3 and half into 70 by 35 sqmm , supply and carriage and erection of lt fuse set 25 kva , supply and carriage and erection of ms angle 75 into 75 into 6 into 2028 mm with clamp and bolt and nut , supply and carriage and erection of suspention clamp , supply and carriage and erection of dead end clamp , supply and carriage and erection of eye hook , supply and carriage and erection of j hook , supply and carriage and erection of clamp for distribution box , supply and carriage and erection of piercing connector , supply and carriage and erection of clamps for lt toff with n and b , supply and carriage and erection of pg clamp , dismantling and removal of existing 100 kva transformer oid and used , dismantling and removal of existing 16 kva transformer oid and used

State Government

CTN :45261962 Due date: 15 Jun, 202615 Jun, 2026 38.95 Lacs
Tender For corrigendum : supply of carriage and erection of 11kv by 400v transformer 250 kva , carriage and erection of 11kv by 400v transformer 63 kva , carriage and erection of 11kv by 400v transformer 25 kva , carriage and erection of transformer 11kv by 2 and half kv 16 kva single phase , carriage and erection of pcc pole 8 and half meter , carriage and erection of pcc pole 11 meter , carriage and erection of 11 kv v type steel cross arm , carriage and erection of 11 kv polymeric disc insulator t and c type 45 kn , carriage and erection of 11 kv disc fitting t and c type 45 kn , carriage and erection of 11 kv pin insulator polymeric , carriage and erection of 11 kv gi pin with nut bolt , carriage and erection of 11 kv tpmo with polymer insulator , carriage and erection of lt xlpe cable a1 3 and half into 400 sq mm , carriage and erection of lt xlpe cable 3 and half into 70 by 35 sq mm , carriage and erection of lt abc 3 into 95 plus 1 into 70 plus 1 into 16 sqmm , carriage and erection of lt abc 3 into 120 plus 1 into 95 plus 1 into 16 sqmm , carriage and erection of acsr weasel conductor , carriage and erection of earthing of pole by ms earthing rod of 20 into 2500mm , carriage and erection of 11 kv stay set complete 16 into 1800 mm , carriage and erection of lt distribution box single phase , carriage and erection of lt distribution box three phase , carriage and erection of plinth , carriage and erection of fencing , carriage and erection of water level earthing , supply and carriage and erection of dp holding clamps for top channel tpmo and fuse set etc with bolts nuts , supply and carriage and erection of stone pad , supply and carriage and erection of concreting of pole , supply and carriage and erection of concreating of stay , supply and carriage and erection of danger board , supply and carriage and erection of number plate , supply and carriage and erection of barbed wire ) /bid number : gem/2026/b/7554223 * /dated: 20-05-2026 & & / bid document 1 / 36 including jumper , supply and carriage and erection of henley type tailless unit protection cubical pannel 500 amp 650 v for 250 kva dt , supply and carriage and erection of copper l piece 50 into 225 into 10 mm ls , supply and carriage and erection of copper l piece 62 into 225 into 12 mm ls , supply and carriage and erection of a1 leg long barrel of size ls , supply and carriage and erection of ms channel dropper 100 into 50 into 2028 mm for fuse set , supply and carriage and erection of ms top channel 125 into 65 into 2240mm , supply and carriage and erection of ms channel 125 into 65 into 1300mm t off , supply and carriage and erection of 11 kv fuse set , supply and carriage and erection of lt pvc cable 4 into 16 sq mm , supply and carriage and erection of lt pvc cable 3 and half into 150 by 35 sq mm , supply and carriage and erection of lt fuse set 25 kva , supply and carriage and erection of ms angle 75 into 75 into 6 into 2028 mm , supply and carriage and erection of suspention clamp , supply and carriage and erection of dead end clamp , supply and carriage and erection of eye hook , supply and carriage and erection of j hook , supply and carriage and erection of clamp for distribution box , supply and carriage and erection of piercing connector , supply and carriage and erection of clamps for lt toff with nut and bolt , supply and carriage and erection of pg clamp , supply and carriage and erection of 11 kv v type steel cross arm clamp with nut and bolt , supply and carriage and erection of cross arm holding clamp with nut and bolt , supply and carriage and erection of f bracket for 11 kv , supply and carriage and erection of eye bolts for service cable , supply and carriage and erection of clamps for transformer 75 into 6 mm , supply and carriage and erection of chemical earthing complete

State Government

CTN :45413511 Due date: 12 Jun, 202612 Jun, 2026 NA
Tender For corrigendum : tender for supply of equipment material design erection testing commissioning for sop to ms shyam indus pvt ltd co prittam singh at vill baghni by prov 1104kv 25kva sstn aw 3ph lt line in vill baghni in e section bhadwar under esd hpsebl nurpur. t - 25 kva trsanformer, prov. distribution transformer (ordinary), 11/0.4 kv, 25 kva ., prov. steel tubular poles (9 m, working load > 200 kgf/m ) ., prov. muffs with concerete filling, prov. x-arm: [channel iron (100x50x6 mm), length : 2800 mm x 2 nos] for incomer line, prov. ms angle iron (50x50x6 mm), length: (2800 mm) x1 nos for las, prov. x-arm: [channel iron (75x40x6 mm), length : (2800 mm x 4 nos] for supporting do fuse unit & go switch, prov. transformer bed, belting & knee bracing, prov. x-arm: [channel iron (100x50x6 mm), length : 2800 mm x 2 nos] for transformer bed, prov. x-arm [channel iron (100x50x6 mm), length : (460 mm) x 2 nos for supporting main channel of transformer], prov. ms angle iron (50x50x6 mm), length : (2800 mm) x 2 nos, prov. ms angle iron (35x35x5 mm), length : (460 ) x 2 nos, prov. ms angle iron (50x50x6 mm), length : (950 mm) x 2 nos for bed knee bracing, prov. transformer lt distribution box and go switch fixing assembly, prov. ms angle iron (50x50x6 mm), length : (2800 mm) x 2 nos, prov. ms angle iron (50x50x6 mm), length : (450 mm) x 1 nos, prov. go switch handle supporting: [channel iron (75x40x6 mm), length : 460 mm, prov. go ab switch unit (11kv, 400a, 25 ka ) tripple pole o/d type, prov. d.o fuse unit, prov. lighting arrester, 9 kv station class (porcelain type), prov. discs insulator sets (comprising 1 no. disc: ^^(porcelain, bs, 12 kv, 90 kn) including dead end clamps etc.), prov. stay set complete, prov. stay wire (7/3.15 mm) (6.0 kg per stay set), prov. pipe earthing set, prov. lt distribution panel box with mccb(160a, 10ka, 4p, 1no) & sfu(32a, 5no, rewirable), prov. half clamp (m.s. flat 50x6 mm), prov. full clamps (m.s. flat 50x6 mm), prov. nuts and bolts of various sizes (galvanised / coated) [preferably 16 mm or more (with flat and spring washers)], prov. aluminium thimble, prov. copper thimble 35 amp, prov. danger plate, prov. barbed wire, prov. lt cable (3.5 core) 50 mm , prov. energy meter 3- , 4 wire ct operated static tri-vector meter with box(ct-100a), prov. aluminum paint., prov. 6/1/3.35, 50mm ., prov. construction of foundation of transformer, erection of 25 kva s/stn. i.e. digging of pit for pole & earthing two no. poles & 3 nos. for earth drilling of holes in x-arms, preparation of plateform str. members c.i., a.l. i.e. x-arms & k.b. set, errection of d/p, concreating of rcc muff errection of plateform, errection of x-arms, d.o., l.a., mccb, switch lt box, energy meter, errection of transformer, earthing connection to g.o. switch, transformer l.a. etc., errection of stay set, jumper, pipe earthing 3 nos set, l.t. cable, barbed wire and painting complete in all respect., transportation charges @10490/-, prov. transportation charges & mannual carriage of 25 kva pole mounted distribution s/stn. (line length 0.500km), erection of 3- ph. lt line, prov. aaac (7/3.15 50mm ) { neutral conductor including 1% (sag, jumpering and wastage}, prov. steel tubular poles (8 m, working load > 200 kgf/m )., prov. muffs with concerete filling, prov. shackle insulator with d-iron, prov. lt stay set i/c egg insulator., prov. nuts and bolts of various sizes (galvanised / coated) [preferably 16 mm or more (with flat and spring washers)], prov. stay wire, prov. g.i wire no 8swg, erection of 8 mtr. st pole single structure i.e. digging of pit, fixing of insulator, x-arms, k.b. set, top clamp, barbed wire, danger plate, drilling of holes and filling of pit + ramming complete in all respect., sagging of conductor i.e. laying, stringing and sagging & binding with insulator (single wire per km)., sagging of g.i i.e. laying, stringing and sagging & binding with insulator (single wire per km)., erection of stay

CTN :45063789 Due date: 01 Jun, 202601 Jun, 2026 NA
Tender For bid to ras supply of cgi sheet 10 ft x 3 point 5 ft x 0 pt 71 mm , pgi sheet 8 ft x 4 ft x 0 pt 50 mm , plywood size 8ft x 4 ft x 19 mm , plywood size 8 ft x4 ft x 06 mm , plywood size 8ft x 4 ft x 10 mm , plywood size 8ft x 4ft x 12 mm , scantling size 10 ft x 2inch x 2inch , scantling size 10 ft x 3inch x 2inch , scantling size 10 ft x 4 inch x 2 inch , planks size 10 ft x 10 inch x 1 point 25 inch , pvc pipe size 4 inch oblique 110 mm dia 06 mtr long , plain bend 4 inch dia , pvc bend 45 degree 4 inch dia , pvc collar 4 inch dia , clamp 4 inch dia , silicon tube 280 ml , downspout 3 inch x 6 inch x 4inch dia , pvc solvent 500 ml , nut and bolt with washer 0 pt 5 inch , screw 1pt 5 inch packet of 100 pcs , screw 1 inch packet of 100 , plastic gitti 1pt 5 inch pack of 100 pcs , ms nails 2 inch comma 3 inch comma 4 inch of 5 kg each , beading 10 ft x1pt 5 inch x 12 inch , self driving screw 2 pt 5 inch , sliding bolt size 12 inch with nut and bolt , sliding bolt size 8 inch with nut and bolt , sliding bolt size 6 inch with nut and bolt , tower bolt 6 inch , tower bolt 4 inch , handle 6 inch , handle 4 inch , ms hinges 3 inch , ms hinges 4 inch , cpvc tank nipple 3 by 4 inch dia , wc european type with cistern and all accessories , wash basin with fastener and all accessories , pvc connection pipe 18 inch length 1 by 2 inch dia , cpvc plain jali 5 inch , cpvc hole jali 5 inch , cpvc bib cock 15 mm , cpvc angle cock 15 mm , curtain rod 5 ft long , window glass size 6 ft x 4inch x 5 mm , daimond glass cutter 3 dash 12 mm , pvc pipe 10 ft x 4 inch tybe b , paint enamel po red pack 20 ltr pack , paint enamel bus green pack of 20 ltr , apex emulsion exterior paint , paint enamel white 04 ltr pack , violet stainer of 200 ml pack , paint black 04 ltr pack , wall putty 20 kgs pack , plaster of paris pop pack of 10 kgs , teracotta red pack of 04 ltr , metal oxide pack of 10 ltr , paint enamel silver 01 ltr pack , touch wood varnish 05 ltr pack , turkey amber polish pack of 400 gm , raw senna pack of 400 ml , lal mitti pack of 400 gm , regmar cloth 120 nos , regmar cloth 100 nos , regmar 80 nos , regmar paper 220 nos , regmar 60 nos , walnut stainer pack of 100 ml , black stainer pack of 50 ml , blue stainer pack of 50 ml , red stainer pack 50 ml , wood primer pack of 04 ltr , oil based distemper 10 ltr pack , yellow oxide stainer pack of 100 ml , fast yellow stainer pack of 50 ml , chowk mitti pack of 05 kgs , fevicol ddl pack of 1 kgs , black mitti pack of 01 kgs , paint enamel golden brown pack of 05 kgs , painting brush 2 inch , painting brush 3 inch , painting brush 4 inch , tarpin oil pack of 20 ltr , paint enamel oxford blue pack of 04 ltr , paint enamel choclate brown 04 ltr pack , paint enamel yellow 04 ltr pack , sprit pack of 05 ltr pack , thinner pack of 05 ltr , box section 40 mm x 30 mm x 4 mm qty 42 mtr , box section 50 mm x 30 mm x 3 mm length 5 mtr total qty 95 mtr , ms flat plate 25 mm x 3 mm total qty 150 mtr , polycarbonate fiber transparent sheet not less than 8mm thick , self drving screw 55mm , self drving screw 25mm , gusset plate 100 mm x 100 mm x 6 mm , aluminum door with glass partition size 1 pt 0 x 2 pt 1 mtr , hinges size 100 mm , aldrop set , light hanging 2 x 2 ft , led tube light 4 feet long 20w , led bulb 9 w 12 w , led concealed ceiling light 12 w square shape crompton , 1 pt 5 mm wire pvc single core copper roll of 100 mtr , 2 pt 5 mm wire pvc single core copper roll of 100 mtr , 05 amp switch module , 05 amp socket module , 15 amp switch module , 15 amp socket module , door bell ding dong and bird sound , angle holder , pvc tape roll pack of 12 pcs , plug top 5 amp , //bid details 2 / 85 plug top 15 amp , batten holder , pendant holder , flexible wire 01 sqmm roll of 100 mtr , mcb 16a , isolator dp 63a

CTN :45327983 Due date: 01 Jun, 202601 Jun, 2026 15.00 Lacs
Tender For 06/2026-27/ - deposit work(running work) in sub division masauli under edd ramnagar. - safe loading carriage including unloading and proper stacking of following materials from central store barabanki / je store to site of work., pcc pole /stp pole 8.5/11/13 mtr long, 11kv pin insulator ., 11kv disc insulator ., 11kv x-arm, ms earthing rod, transformer 25/63/100 kva, abc cable 3x50/95 sq. mm., abc cable 1x25+1x16 sq. mm., 11 kv xlpe cable 3x70++3x120+3x185 sqmm, acsr weasal conductor, lt d.b. box, 11 kv ct/pt unit, 11 kv metering cubical/pilfer, stay set complete, other line material, dragging of pole from je dump store to site, erection of stay set of 16x1800 mm rod duly painted with red oxide,anchor plate, and stay insulate etc., stringing and sagging of 11 kv line with acsr weasal conductor including nuzzling binding and jumpering (weasal conductor will be provided by the department), pipe earthing ( boring type 40 feet), installation of mounting of following capacity of transformer including its connection between 11 kv and lt line mounting provinding crimping type aluminium lugs of required size.( all the material except transformer will be arranged by the contractor), mounting of 25/63/100 kva tranformer, installation of fixing 11 kv ct/pt with required meterial., installation of fixing 11 kv pilfer unit with required meterial., errection of substation type double pole with pcc /stp 8.5/11/13 pole mtr. long . including mounting of top channal dropper channel, base angle with clamps with nut & bolt, fitting of 33/11 kv pin & pin insulator., errection of single pcc /st pole for stringing, jumpharing and sagging of conductor 1/6 of total length of poles, stringing and sagging of lt 1x16 abc cable (lt abc cable will be provided by the department), stringing and sagging of lt 3x50 /95abc cable (lt abc cable will be provided by the department), installation of d.b. box, earthing of pole with ms earthing., provinding & fixing of various type materials. all materials shall be supplied by the contractor., nut & bolt, pg clamp, clamp for top/ dropper and t-off2/stay/lt etc., gi pipe 3"&4 dia, l t insulator, looping and choopping of tree branches in laying on the route of line., laying of 11kv xlpe cable 3x70, 120,185 sq. by mm manually, concreating and pilinthing of st& pcc pole 18x24 cm., fabricate with hole suitable size in steel items, receive from central store light as top channel/dropper channel sub station base angle etc., looping of cable and mounting of pole., gaurding of 11 kv line, dismentaling of 11 kv line & poll, other line work

CTN :45327984 Due date: 01 Jun, 202601 Jun, 2026 15.00 Lacs
Tender For deposit work(running work) in sub division ramnagar under edd ramnagar. - safe loading carriage including unloading and proper stacking of following materials from central store barabanki / je store to site of work., pcc pole /stp pole 8.5/11/13 mtr long, 11kv pin insulator ., 11kv disc insulator ., 11kv x-arm, ms earthing rod, transformer 25/63/100 kva, abc cable 3x50/95 sq. mm., abc cable 1x25+1x16 sq. mm., 11 kv xlpe cable 3x70++3x120+3x185 sqmm, acsr weasal conductor, lt d.b. box, 11 kv ct/pt unit, 11 kv metering cubical/pilfer, stay set complete, other line material, dragging of pole from je dump store to site, erection of stay set of 16x1800 mm rod duly painted with red oxide,anchor plate, and stay insulate etc., stringing and sagging of 11 kv line with acsr weasal conductor including nuzzling binding and jumpering (weasal conductor will be provided by the department), pipe earthing ( boring type 40 feet), installation of mounting of following capacity of transformer including its connection between 11 kv and lt line mounting provinding crimping type aluminium lugs of required size.( all the material except transformer will be arranged by the contractor), mounting of 25/63/100 kva tranformer, installation of fixing 11 kv ct/pt with required meterial., installation of fixing 11 kv pilfer unit with required meterial., errection of substation type double pole with pcc /stp 8.5/11/13 pole mtr. long . including mounting of top channal dropper channel, base angle with clamps with nut & bolt, fitting of 33/11 kv pin & pin insulator., errection of single pcc /st pole for stringing, jumpharing and sagging of conductor 1/6 of total length of poles, stringing and sagging of lt 1x16 abc cable (lt abc cable will be provided by the department), stringing and sagging of lt 3x50 /95abc cable (lt abc cable will be provided by the department), installation of d.b. box, earthing of pole with ms earthing., provinding & fixing of various type materials. all materials shall be supplied by the contractor., nut & bolt, pg clamp, clamp for top/ dropper and t-off2/stay/lt etc., gi pipe 3"&4 dia, l t insulator, looping and choopping of tree branches in laying on the route of line., laying of 11kv xlpe cable 3x70, 120,185 sq. by mm manually, concreating and pilinthing of st& pcc pole 18x24 cm., fabricate with hole suitable size in steel items, receive from central store light as top channel/dropper channel sub station base angle etc., looping of cable and mounting of pole., gaurding of 11 kv line, dismentaling of 11 kv line & poll, other line work
 Loading, Please wait...

Connect us via What's Up