Get complete information related to latest Lt Panel Board Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Lt Panel Board Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Lt Panel Board Tenders.
Tender For supply of one coach set of (1)control arm lower right to drg no.aaa02028 alt'd' - 4 nos, (2)control arm lower left to drg no. aaa02027 alt'd' - 4 nos, (3)contorl arm upper to drg no aaa02026 alt'j' - 8 nos. (these three items form one set) special condition : 1. each item to be properly wrapped in biodegradable transparent plastic sheet to avoid water ingress. 2. the items should be separated by using suitable eco friendly cushioning material to protect machined portionfrom damage & rubbing. 3. all machined surface shall be protected from corrosion as per rcf spec. md.44121 dt.19.04.2011(para 1). 4.items to be stacked properly in sturdy wooden boxes, which can be handled by fork lift/crane. 5. control arm upper 8nos. in one box and control arm lower 8 nos. (4 left and 4 right) in one box. 6. label with details of description of item, drg. no., quantity, po no., pl no., and name of the supplier, etc., to be affixed on the pallet. infrastructure requirements shall be as per mdts-241 rev.02 [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]
Tender For supply of vrf or vrv air cooled outdoor units suitable for cooling or heating having 100 percent hermetically sealed inverter type twin rotary or scroll compressor capacity of machines 14 hp to 22 hp , following minimum capacity 4 way vrv or vrf cassette type indoor ceiling mounted unit equipped with synthetic washable media pre filter,3 point 2 tr , following minimum capacity 4 way vrv or vrf cassette type indoor ceiling mounted unit equipped with synthetic washable media pre filter,4 tr , vaccumiazation and nitrogen testing of following nominal sizes of soft or hard drawn copper refrigerant piping for vrv or vrf system, thickness 1 point 2 mm , 9 point 5 mm dia od soft drawn with tube thickness 1 point 2 mm , 12point 7 mm dia od soft drawn with tube thickness 1point 2 mm , 15 point 86 mm dia od soft drawn with tube thickness 1point 2 mm , 19 mm dia od hard drawn with tube thickness 1 point 2 mm , 22 point 2 mm dia od hard drawn with tube thickness 1 point 2 mm , 25 point 4 mm dia od hard drawn with tube thickness 1 point 2 mm , 28 point 58 mm dia od hard drawn with tube thickness 1 point 2 mm , 34 point 9 mm dia od hard drawn with tube thickness 1 point 62 mm , 41 point 27 mm dia od hard drawn with tube thickness 1 point 62 mm , s i t c of y joints kit refrnet , drain piping rigid pvc piping complete with fittings supports as per specifications and insulated with 6mm thick closed cell elastometric nitrile rubber insulation 25mm dia and , 32 mm dia , 40mm dia , control and transmission wiring , testing and commissioning of vrf or vrv systems including topping of r410a gas as per site requirements , supply and installation of u or v protection of used copper pipe at outer site for odu connection site , 6way load bank double door enclosure confirming to is 8623 iec 60439 g frame panelboards , supplying and fixing of following sizes of medium class pvc conduit along with accessories 25mm , frlsh or hffr pvc insulated copper conductor single core cable in the existing surface or recessed steel or pvc conduit as required 3 x 1 point 5 sq mm , suitable size gi box with modular plate and cover in front on surface or in recess , one number xlpe insulated and pvc sheathed copper conductor armoured power cable of 1 point 1 kv grade 4 x 16 sqmm , 16 a rating 240 by 415 v 10 ka c curve miniature circuit breaker suitable for nductive load of following poles in the existing mcb db complete with connections single pole , single pole and neutral sheet steel mcb distribution board 240 v on surface by recess complete 12 way double door , supplying and fixing 25 a rating single pole and neutral , following size of perforated painted with powder coating m s cable trays 150 mm width x 50 mm depth x 1point 6 mm thickness , earthing with g i earth pipe 4 point 5 metre long 40 mm dia including accessories , providing and laying earth connection from earth electrode , providing and fixing 6 swg dia g i wire on surface or in recess for loop earthing , amc as per section c , installation of cassette ac 2 ton 5 star , copper pipe , 4 core copper wire , drain pipe with insulation , odu stand , cable tray , hanging rod , faster nut , wrapping tape , 3 core copper wire
Tender For supply of 9kva, 750v ac/415v ac/190v ac, 3-phase, dry type distribution transformer for lhb type non-ac coaches., as per drawing: rdso/pe/spec/tl/0158-2010,rev-0,type-i with edml 225, rev-0 & rcf corr-1., packing instruction: alternator,rru, erru &accessories, transformer,bulkinverters , battery, charger, self priming monoblock pump, inverter, change over control box etc: suitably covered with biodegradable transparent polythene and packed in wooden cage: bottom frame to be made of wooden planks 20mm thick &should have support of at least 3 wooden battons of size 100x100mm of suitable length to facilitate lifting by fork lifter. each panel to be packed in wooden cage of suitable dimensions made out of wooden strips of 20x100mm size. gap between each strip should not be more then 100mm. the material used for product packaging shall be eco-friendly.a list should be pasted on each wooden cage showing order no, pl no, description of the item, drg. no/ spec. no ,qty, firm's name &address and date of despatch etc. note- 1) firms have option to provide qr code. for linkage ofpo, the cardboard box shall carry a qr code having details as listed below: a) name of the manufacturer b) purchaseorder number c) purchaseorder date d) uniqueserial number (or lot number for bulk items) of the manufacturer or e) dateof manufacture f) deliverychallan no. g) deliverychallan date 2.the qr code shall be as per iso/iec 18004 model2 and thedata shall be available as xml using the tags detailed above. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]
Tender For supply of smoke detector unit for power car, as per drawing: edts-087, rev-b, corr 1&2with rcf annexure -br-01, packing instruction: alternator,rru, erru &accessories, transformer,bulk inverters , battery, charger, self priming monoblock pump, inverter, change over control box etc: suitably covered with biodegradable transparent polythene and packed in wooden cage: bottom frame to be made of wooden planks 20mm thick &should have support of at least 3 wooden battons of size 100x100mm of suitable length to facilitate lifting by fork lifter. each panel to be packed in wooden cage of suitable dimensions made out of wooden strips of 20x100mm size. gap between each strip should notbe more then 100mm. the material used for product packaging shall be eco-friendly.a list should be pasted on each wooden cage showing order no, pl no, description of the item, drg. no/ spec. no ,qty, firm's name &address and date of despatch etc. note- 1) firms have option to provide qr code. for linkage of po, the cardboard box shall carry a qr code having details as listed below: a) name of the manufacturer b) purchaseorder number c) purchaseorder date d) uniqueserial number (or lot number for bulk items) of the manufacturer or e) dateof manufacture f) deliverychallan no. g) deliverychallan date 2.the qr code shall be as per iso/iec 18004 model2 and the data shall be available as xml using the tags detailed above. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]
Tender For repairing gear box of screw pump no. 3, supply and installation of cables and cable tray for ptu and control room and repairing of parshal flume, screw pump house at konia mps, varanasi
Tender For annual rate contract for provding new water service connection with material under division siwana - providing household tap connection as per technical specification and approved drawing as per relevant is code (amended up to date) from hdpe/upvc/di/ac/ms/gi pipe line up to consumer meter/premises by using pp mechanical integrated saddle with inbuilt flow control valve made out of ss316 designed for 5 lpm discharge at 0.5 bar pressure , not exceeding the flow of 7 lpm at 2 bar and a compression elbow, moulded in single piece/ fusion welded (complete job) including digging out suitable size of pits and trench for laying service line in all kinds of soil; depositing and refilling of pit & jhiri with watering & ramming /compacting in layers and disposal of surplus excavated soil as directed with in a lead of 100 meter ; providing & fixing of all fitting duly approved in accordance with specification for potable water including gm full-way valve (is:778 mark) or wheel valve and specials with 20 mm nominal dia mdpe pipe pe 80 pn 16 as per iso 4427 / 20 mm nominal dia ppr-c (three layered) pipe pn16 sdr 7.4 (is:15801:2008) (isi mark) and above ground level using ppr-c pipe with standard ppr fittings/ gi pipes in the premises for fixing a tap / meter box (excluding) ,including accessories with flushing, cleaning, disinfecting and testing of pipe line complete required for making of service connection complete in all respect including labour charges . the service line should be laid at least 45 cm below ground level. note: road cut and restoration is not part of this item and paid separately. for connection with 20 mm dia mdpe/ppr-c pipe length up to 05 mtr. rate is exclusive of gst., road cutting for house hold service connection in minimum trench width wherever road crossing is required. road cutting of cement concrete,wbm, black top etc. of all thickness shall be done by using a concrete cutter machine keeping minimum trench width and restoration of the road with cement concrete with pcc m-10 and cc m-30 grade as per specification and direction of engineer in charge.(06 meter) rate is exclusive of gst., add extra over item no 1.21, 1.22 & 1.23 for providing 20 mm pe 80 pn 16 as per iso 4427 mdpe pipe including excavation, providing, laying & jointing of service line above 5.00 mtr. rate is exclusive of gst., road cutting charges for pit of size 1.0x1.0 mtr for providing connection dismantling of cement concrete pavement for pipe line and chambers by mechanical means using pneumatic tools, cutting the peripheral edge by cc cutter, breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials up to a lead of 1000 meters. measurement for dismantled trench to be made as per standard trench width specified in tender document and no extra payment shall be made be made for trench width more than specified, re-handling of material/earth to complete the tasks as per technical specification and scope of work. (0.30 cum) rate is exclusive of gst., road restoration charges for pit of size 1.0x1.0 mtr for providing connection providing and laying in position cement concrete m10 grade nominal mix 1:3:6 (1 cement : 3coarse sand : 6 graded stone aggregate 40 mm nominal size) in base course complete including all material, labour, machinery, lighting, guarding for road restoration work in trenches of pipe line and chamber work. measurement for cc work to be made as per standard trench width specified in tender document and no extra payment shall be made be made for trench width more than specified, complete work as per technical specification and scope of work. (0.10 cum) rate is exclusive of gst., providing and laying in position cement concrete in specified grade over prepared base course complete including finishing, curing, all material, labour, machinery, lighting, guarding for road restoration work in trenches of pipe line and chamber work. measurement fo
Tender For maintenance and operation of subways, storm water pumps, fobs and related electrical installation, ltpanelboard, diesel generator set and dewatering pumps under pwd south east new delhi
Tender For auction sale of others - disposal of ferrous scrap released material such as: (1) brake beam icf, qty=01 no.=25 kg. (2) c.i. valve, qty=07 nos.=4.2 kg. (3) dashpot spring 16 ton, qty=07 nos.=161 kg. (4) feed pipe, qty=36 nos.=36 kg. (5) brake pipe, qty=40 nos.=40 kg. (6) passenger emergency alarm device, qty=01 no.=01 kg. (7) angle cock, qty=29 nos.=43.5 kg. (8) g.m wheel valve 40 mm, qty=19 nos.=15.2 kg. (9) flushing valve, qty=12 nos.=9.6 kg. (10) gravity cock, qty=728 nos.=36.4 kg. (11) shock absorber, qty=02=14 kg. (12) drain cock, qty=18 nos.=10.8 kg. (13) isolating cock, qty=01 no.=0.8 kg. (14) g.i. pad lock off size, qty=31 nos.=15.5 kg. (15) fire extinguisher, qty=74 nos.=133.2 kg. (16) pressure gauge of size, qty=15 nos.=1.5 kg. (17) distributor valve for icf, qty=01 no.=25 kg. (18) door closer, qty=25 nos.=20 kg. (19) swinging nut, qty=51 nos.=51 kg. (20) swinging link pin, qty=69 nos.=172.5 kg. (21) flex ball cable, qty=05 nos.=10 kg. (22) step complete mounting (foot step), qty=05 nos.=80 kg. (23) rotary lock lift, qty=02 nos.=4 kg. (24) installation lever, qty=32 nos.=9.6 kg. (25) control arm top with bush, qty=02 nos.=116 kg. (26) primary bump stop, qty=29nos.=1.45 kg. (27) lavelling valve, qty=05 nos.=5 kg. (28) dump valve, qty=08 nos.=6.4 kg. (29) axle end cover, qty=17 nos.=34 kg. (30) centering disc lower & upper, qty=08 nos.=08 kg. (31) modified cbc restrictor, qty=02 nos.=10 kg. (32) empty iron drum capacity 210 ltrs, qty=20 nos.=320 kg. (33) empty iron drum capacity 20 ltrs, qty=120 nos.=120 kg. (34) axle box pivot bush, qty=03 nos.=45 kg. (35) nut & bolt etc, qty=700 kg. having local lot no. dhn/2026/86. location:- blacksmith room near c&w/store/dhn.