Latest lt power cable Tenders | Government lt power cable Tenders

State Government

CTN :45315676

29 Jun, 2026 13.77 Crore

Bengaluru - Karnataka

Tender For corrigendum : establishing 2x12.5 mva, 66/11kv sub-station at kalathmadu along with construction of proposed 66kv lilo line from the existing 66kv virajapete- ponnampete sc line on dc towers to proposed 66/11kv sub station at kalathmadu for a distance of 1.925km in virajpete taluk, kodagu district on partial turnkey basis including supply of all matching materials/equipments (excluding supply of 2x12.5mva 66/11kv power transformers and 11 kv switchgear) and erection (including civil works) of all materials/equipments, testing and commissioning - on load tap changer , control and relay panels, , circuit breakers, , 11kv mcvcbs & pcvcbs, , tower parts and all types of station structures with bolts, nuts and washers, , i beams & m.s channels, , lightning arrestors, , isolators, , insulators, , instrument transformers, , battery sets, , battery charger, , acsr conductors, , ground wire, , 11kv ug cable, , 1.1kv copper control cables & lt power cables, , capacitor bank, , hardware for insulator, conductor and ground wire:, , tension & suspension clamps and connectors., , accessories for conductor and ground wire:, , p.g clamps. m.s.c joints, pre-formed rods, repair sleeves, vibration damper etc., , c-type fire wedge connectors, , i) grounding materials (g.i flat, m.s flat etc.,), , il)grounding materials (c.i pipes), , ltac & dcdb panel, , 11kv termination & jointing kits, , class, , nitrogen injection fire protection, , system, , rigid tubular aluminium bus bars, aluminium clamps and connectors., , wave traps/line traps, , plcc equipment

Central Government And Public Sector

CTN :45537813

29 Jun, 2026 1.03 Crore

Araria - Bihar

Tender For restoration of the fire fighting system including replacement of the defective 1.1 kv lt power cable from ess to the fire pump house with allied works at icp jogbani bihar.

CTN :45513424

01 Jul, 2026 NA

Kanpur - Uttar Pradesh

Tender For (i) copper wire 14 swg (1.628mm) for hanging of feed arm, plate sub assy. plate g/a on electrode so , copper wire 19 swg (0.9116mm) for hanging of guide front right fly of lever, arm for armature , copper wire 22 swg (0.6438mm) for hanging of pin firing, trigger pin, gas regulator, plug gas , copper wire 25 swg (0.4547mm) for hanging of safety, latch, bar connecting hammer pin, on electr , copper wire swg-12(2.053mm) for hanging of receiver plate on electrode so that required thickne

CTN :45212205

19 Jun, 2026 NA

Panchkula - Haryana

Tender For corrigendum : supply of board i/o (no. a2140e) , electrode, straight 5" t316 (no. 4a5ad) , ignition wire 6790 (no. a2225e)

CTN :45516874

22 Jun, 2026 NA

Unnao - Uttar Pradesh

Tender For switch industrial 2.5 0.25inch ,dp055061 , wt 24 2x 400 diffuse sensor ,sick , pencil inductive sensor , gd m.c head lower bell , neauprene seal,hydrotesting unit , l bend for filling gun , gd.pt ms sliding bush , screw for pneumatic cylinder , supporting rod ss 40x300 for gd.pt , ss locking bush for clamping rod , pneumatic cylinder shaft 50x160 short thread , pneumatic cylinder shaft 50x160 long thread , v belt a 66,b62,b66 antistatic , pneumatic cylinder norgren.festo 63x25 , lot adopter , plummer block ucp 212 ntn bearing , vibration rubber damper , upper head brass for antennae valve ,norgren , manual sealing gun , antennae valve ,norgren , wd 40 spray , thread locker , 40x400 and 40x400 cylinder guide rail , lens for optical fibre z017400 , coil for metalwork valve , pu seal for gd lower bell , optical fibre cable,sick , push button air valve ,pneumax , spring for centering gun , allen csk bolt 6x50mm,10x30mm ht tvs , chain lock make diamond , pneumatic cylinder shaft 50x80 short thread , roller clamping arm for gd and pt , hot air sealing gun straight type , base of gd ,central section ms , ht bolt 8x40 mm,8x75mm , hexagonal bolt with nut and washer 10x40mm , nut bolt with washer 12 x40 mm , hexagonal bolt with nut and washer 16x75mm , antennae wire , vision unit antennae rod , flameproof sealing unit sensor , yoke plate , clp rd sds drill bit hammer 6x160,12x260,16x350mm , it hss drill p.s 8,10,12 mm , welding electrode 3to 15mm ,manglam , seal kit ck 95 40 , teflon roller with dual bearing , flexible coipling 16x1to 5 ,for introduction unit , pt gun bottom ss head to 6 hole of 8 mm , sensor cable to 1,3,5,7,10mtr , allen csk bolt 0.5x2mm ht tvs , wheel for carousel , welding rod ss to esab make , reflector to white , load cell cable mk 4 , load cell cable to check scale , ss wheel to telescopic boom , mounting for gd cylinder , nylock nut to 6,8 ,10mm , ms anchor fastener 16x150, 12x150 , frl 0.5 inch , pneumatic single pilot valve 2.5 , clamping guide ms block , linear bearing , guide rod ejection unit,introduction unit , conveyor bend teflon , seal kit 50x160 to norgren , elbow connector, size 0.25inchx4mm , elbow connector,size 0.25inchx6mm , elbow connector,size 0.25inchx8mm , elbow connector,size 0.125inchx4mm , elbow connector,size 0.125inchx6mm , elbow connector,size 0.125inchx8mm , elbow connector,size 0.5inchx8mm , elbow connector,size 0.5inchx10mm , elbow connector,size 0.5inchx12mm , reducer,pu, size 6to 4mm,8to 4mm , reducer,pu, size 8to 6mm , reducer,pu, size 10to 8mm , reducer,pu, size 12to 8mm , connector,straight, size 4x4mm,8x8mm , connector,straight, size 6x6mm , connector,straight, size 10x10mm , connector,straight, size 12x12mm , t connector,size 4x4x4mm , t connector,size 6x6x6mm , t connector,size 8x8x8mm , t connector,size 10x10x10mm , t connector,size 12x12x12mm , wll24to 2x430501 ,optical sensor , pu tube 10mm and 12 mm , pu tube 8 mm , pu tube 6 mm , pu tube 4 mm , hot air sealing gun baliga and flameproof type , pressure gauge 2inch ,0to 10 kg per cm2 micro , pressure gauge 4inch ,0to 10 kg per cm2 micro //bid details 2 / 113 , pressure gauge 2inch ,0to 28 kg per cm2 micro , pressure gauge 4inch ,0to 28 kg per cm2 micro , pressure gauge 2inch ,0to 16 kg per cm2 micro , pressure gauge 4inch ,0to 16 kg per cm2 micro , pressure gauge 2inch ,0to 21 kg percm2 micro , pressure gauge 4inch ,0to 21 kg per cm2 micro , pressure gauge 6inch ,0to 21 kg per cm2 micro , pressure gauge 2inch ,0to 42 kg per cm2 micro , pressure gauge 4inch ,0to 42 kg per cm2 micro , temperature gauge 4inch ,0 to 200 degree celsius micro , pressure gauge 6inch ,0 to160 kg per cm2 micro , vacuum gauge 4inch ,0 to760 mm per hg micro , hose parker 2000mm 0.5 inch , hose parker 2000mm 1 inch , hose parker 900mm and 1000mm 0.5 inch , display cuc mark iv , keypad rubber type mkiv , magnetic sensor pneumatic , cap hammering head with white teflon , carousal drive belt anti static , pressure switch flp smart tech , mechanical tool m

CTN :45530232

27 Jun, 2026 24.36 Lacs

Sonipat - Haryana

Tender For supply of photocatalytic reactor , high current interface module , rotating ring disk eletorde setup rrde , h cell spearator with membrane holder 200 ml , electochemical cell system including 2 mm diameter platinum working elctrode , electochemical cell system including gc electrode , electochemical cell system including reference electrode ag agc1 , electochemical cell system including reference electrode ag non aqueous , electochemical cell system including platinum wire counter electrode , electochemical cell system including sce calomel reference electrode , electochemical cell system including electrode polishing kit

CTN :45525973

17 Jun, 2026 5.78 Lacs

Narnaul - Haryana

Tender For e-tender for supply, erection and commissioning of pvc xlpe armoured of lt power cable for the ph am-1 under w.s mech. sub division no.2, narnaul

CTN :45501064

02 Jul, 2026 20.00 Lacs

Bikaner - Rajasthan

Tender For notice inviting limited tendernotice no: 01/elect./2026/ 706 date:- 10.06.2026tools & equipments of –electrician trade- heavy duty screwdriver insulated , electrician screwdriver thin stem insulated handle, , knife double bladed electrician, , chisel firmer with wooden handle, , grease gun, , (a) crimping tool, , wire cutter and stripper, , hacksaw frame, , tweezers, , drill hand brace, , plane cutters, , smoothing cutters, , file flat rough, , file flat bastard, , file rasp, half round, , the soldering gun, , contactor & auxiliary contacts (rm), , contactor & auxiliary contacts. (rm), , pin type, shackle type, egg type & suspension type insulators including hardware fitting, , portable electric drill machine, , load bank (lamp/heater type), , brake test arrangement with two spring balance rating, , laboratory type induction coil, , series test lamp (rm), , knife switch dpdt fitted with fuse terminals (rm), , knife switch tpdt fitted with fuse terminals (rm), , miniature circuit breaker (rm), , earth plate (rm), , earth electrode (rm), , elcb and rccb (rm), , fuses (rm), , rheostat (sliding type), , capacitors (rm), , various electronic components (rm), , various lamps (rm), , plug socket piano switch lamp, , holder (rm), , cables:, , twisted pair, , non-metallic sheathed cable, , underground feeder cable, , ribbon cable, , metallic sheathed cable multi-, , conductor cable coaxial cable, , direct-buried cable (rm), , rubber mat (rm), , electrician helmet, , rcc pole with accessories (ms angle iron, 'c' clamp, stay insulator etc.) and materials, , quipment, , ohm meter; series type & shunt type, portable box type, , digital multi meter, , a.c. voltmeter m.i. analog, portable box type housed in bakelite case, , milli voltmeter centre zero analog, portable box type housed in bakelite case, , ammeter mc analog, portable box type housed in bakelite case, , ac ammeter mi, analog, portable box type housed in bakelite case, , weight wattmeter analog, , (b) frequency meter (digital), , magnetic flux meter, , tachometer, , tong tester / clamp meter, , megger, , single phase variable auto transformer, , growler, , ac starters: :- -, , f. star delta starter soft starter, , g. auto transformer type, , oscilloscope dual trace, , function generator, , discrete component trainer, , linear i.c. trainer, , digital i.c. trainer, , domestic appliances -, , g. mixture & grinder, , h. washing machine semi-automatic, , i. motor pump set, , oil testing kit, , battery charger, , current transformer, , potential transformer, , 1 5 or 17 computer or latest version, , d.c. shunt generator with control panel, , motor-generator (ac to dc) with control panel, , d.c. compound generator with control panel including fitted rheostat, voltmeter, ammeter and breaker, , dc series motor coupled with spring balance load with control pannel, , dc shunt motor with control pannel, , dc shunt motor with control pannel, , dc compound motor with starter and switch with control pannel, , motor generator(dc to ac) set consisting of - shunt motor with starting compensator and switch directly coupled to ac generator with exciter and switch board mounted with regulator, breaker, ammeter, voltmeter frequency meter, knife blade switch and fuses etc. set complete with cast iron bed, , plate, fixing bolts, foundation bolts and flexible coupling., , ac squirrel cage motor with star delta starter and triple pole iron clad switch fuse with mechanical load., , ac phase-wound slip ring motor with starter switch, , universal motor with starter/switch, , synchronous motor with accessories like starter, excitation arrangements., , thyristor /igbt controlled d.c., , motor drive with tacho-generator feedback arrangement, , thyristor/igbt controlled a.c. motor drive with, , single phase transformer, core type, air cooled, , three phase transformer, shell type oil cooled with delta/ star, , electrical machine trainer -, , diesel generator set with changeover switch, ov

State Government

CTN :45263804

22 Jun, 2026 4.63 Crore

Panchkula - Haryana

Tender For corrigendum : tender for the supply of various equipments - muffle furnace, "al2o3 sample plate, al2o3 furnace door block, protection glove, crucible clip, crucibles, karl fischer titrator, "titration vessel, detector electrode with lead, generator electrode (with frit) with lead, desiccant tube and cap, injection septa (pack of 10), gas tight syringe 1.0ml , luer needle 17-gauge, dust cover, results manager software, main power pack, fuse, karl fischer titration reagent(s), nist calibration standard, refrigerated centrifuge (bench top), bottles/falcon tubes/adapters for 0.2ml tubes, one set of other items (adapters) required for improving the applicability/system performance should to be quoted, nitrogen evaporator, evaporation tubes, gas fuse , water purification system including water softner, cartridges, filters etc. for , bomb calorimeter, "ignition wire, cotton thread, combustion crucible, bomb, nist certified benzoic for calibration, any other accessories required for analysis of food samples., gas chromatograph with ecd, tcd, fid with autosampler, "pesticide column (30 m x 0.250mm x 0.25m (5ms (95% dimethyl-, 5% diphenyl-polysiloxane / 1ms (100% dimethyl polysiloxane or equivalent) 100 mm column for fatty acid profiling with main concern of trans fatty acid application, column for cholesterol application, stationary phase: 95% dimethyl-, 5% diphenyl-polysiloxane (30 m x 0.250mm x 0.25m),, "vial sets (1, 2 ml, crimp type, amber and clear glass), vials (10, 20ml crimp type with cap & septa), 300/500 l recovery vials, septa ptfe/silicone (for 1, 2 ml vials), septa ptfe/silicone (for 10, 20 ml headspace vials), ergonomic crimping tools for different vial types, ergonomic decapping tools for different vial types, head space vials 10,20 ml capacity, suitable syringes for quoted autosampler, suitable headspace syringe /valve/loop, quechers kits for pesticides and herbicides in following matrices:, matrices with high fat, matrices with high water content, matrices with high pigmented, spe cartridges for water., ultra performance liquid chromatography (uplc) with photodiode array (pda), fluorescence (fld) and refractive index detector (rid), sample vials with 1.5 ml or greater, stainless steel ultra sonic bath with the capacity of 5 l or more, with time setting (min) 1-30min or continuous operation with led and push button (should be ip 33 protection class) for sonication of spare parts as well as solvents, fittings, frits, ferules and tubings, tubing cutter, solvent bottles (1000 ml capacity), solvent filters (glass & ss both, compatible manual syringes -10 l, 20 l, 50 l, standards for hplc calibration for pda, ri and fluorescence detector, consumables required for each detector must be provided., "hplc columns: one each of, c8 = 250 4.6 5m c18 = 250 4.6 5m, cyano = 250 4.6 5m. amino = 250 4.6 5m, phenyl = 250 4.6 5m. silica = 250 4.6 5m., all columns must be supplied with respective guard column and holder. ", uv-visible spectrophotometer, ",0.5, 1 and 3-ml quartz cuvettes 10 mm path length, 0.5, 1, and 3 ml glass cuvettes 10 mm path length, cuvette holder, suitable certified standards for validation including holmium oxide glass filters for wavelength calibration & nist traceable, nist traceable potassium dichromate., uv-visible spectrophotometer, ",0.5, 1 and 3-ml quartz cuvettes 10 mm path length, 0.5, 1, and 3 ml glass cuvettes 10 mm path length, cuvette holder, suitable certified standards for validation including holmium oxide glass filters for wavelength calibration & nist traceable, nist traceable potassium dichromate., ft-ir with atr & liquid cell, " hydraulic press with kbr die and pellet holder, suitable mortar pestle (dia 5-6 cm), suitable portable de humidifier to maintain 30- 60% rh, temperature and relative humidity digital indicator with calibration certificate from iso 17025 accredited lab., reference nist standard polystyrene film (0.3 mm) over the range of 3800 cm-1 to 650 cm-1., abbes r

Central Government/Public Sector

CTN :45261853

18 Jun, 2026 NA

Tiruvallur - Tamil Nadu

Tender For corrigendum : tender for supply of lt power cable , lt power cable , lt power cable , lt power cable , lt power cable , lt power cable , lt power cable , lt power cable , lt power cable , lt power cable , lt power cable , lt power cable , lt power cable , lt power cable , lt power cable , lt power cable , lt power cable , lt power cable , lt power cable , lt power cable , lt power cable , lt power cable , lt power cable , lt power cable , lt power cable , lt power cable , lt power cable , lt power cable , lt power cable , lt power cable , lt power cable , lt power cable , lt power cable

Lt Power Cable Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government And Public Sector

State Government

Central Government/Public Sector