Latest lt protection kit scrap Tenders | Government lt protection kit scrap Tenders

CTN :40246346

05 Jun, 2025 NA

Kanchrapara - West Bengal

Tender For supply of set of bolster helical spring for 8 wheeler electric tower car set consisting o f 2 items 2 nos. 1) 1) bolster outer helical spring as per icf drg.no detc-0-5-001,alt.p/nil,item-2 & confir ming rdso spec.wd-01-hls-1994[rev-3 of jan-2009 ]

CTN :40005571

08 May, 2025 NA

Vapi - Gujarat

Tender For corrigendum : supply, installation, testing and commissioning of electro mechanical works of pumping machinery with associated mechanical and electrical equipments, instruments & accessories etc for different head works of vapi municipal corporation area. - item no.1: submersible type pump setsupply, installation, testing and commissioning of submerged submersible pump sets with suitable for working on three phase, 50 hz3percentage ,415v10percentage ac supply, suitable rpm with 3 core flat copper cable from pump to starter panel with cable end terminations, all supports, clamp, pipe fittings, mechanical seal, bearing bush, strainer, pump sensors and other protection, pump control unit etc. suitable construction of foundation/ installation device with cable length from pumps to panels and of following material of construction:m.o.c :- casing : ci, impeller : ss cf8m, wearing ring and bearing bush : bronze, tc mechanical seal, cs/ss bearing, ss shaft with sleeve, ss strainer and ms motor body fasteners : ss 316l, guide rail : ss 316, lifting chain : ss 316capacity of pump - 833 lpm and 35 m. head (15 kw/ 20 hp) - 1 working + 1 standby. the price should include water in oil sensor and io 113 for mechanical seal and motor protections suitable for each pumps., capacity of pump - 1667 lpm and 35 m. head (18.5 kw/ 25 hp) - 1 working + 1 standby, capacity of pump - 2083 lpm and 35 m. head (22 kw/ 30 hp) - 1 working + 1 standby, capacity of pump - 2500 lpm and 35 m. head (22 kw/ 30 hp) -(only supply of pump set - without installation), capacity of pump - 3333 lpm and 35 m. head (30 kw/ 40 hp) - 1 working + 1 standby, capacity of pump - 5833 lpm and 35 m. head (48.75 kw/ 65 hp) - 1 working + 1 standby, capacity of pump - 8333 lpm and 35 m. head (75 kw/ 100 hp) - 1 working + 1 standby, capacity of pump - 7333 lpm and 45 m. head (82.5 kw/ 110 hp) - 1 working + 1 standby, capacity of pump - 11111 lpm and 35 m. head (90 kw/ 120 hp) - 1 working + 0 standby, capacity of pump - 11111 lpm and 35 m. head (90 kw/ 120 hp (only supply of pump set - without installation), capacity of pump - 14286 lpm and 35 m. head (110 kw/ 150 hp) - 1 working + 1 standby, capacity of pump - 16667 lpm and 35 m. head (132 kw/ 180 hp) - 2 working + 1 standby, capacity of pump - 25000 lpm and 26 m. head (150 kw/ 200 hp) - 1 working + 1 standby, item no.2: submersible non-clog vertical pumpsupply, installation, testing and commissioning of sewage submersible, non clog type suitable for working on three phase, 50 hz 3percentage , 415 v 10percentage , ac supply, 1450 rpm synchronous speed with 3 core flat copper cable from pump to starter panel with cable end terminations, all supports, clamps, pipe fittings along with mechanical seal, bearing bush, strainer etc. complete set and following m.o.c: casing: ci, impeller: ss cf8m, wearing ring and bearing bush: bronze, tc mechanical seal, cs / ss bearing, ss shaft with sleeve, ss strainer and ms motor body.capacity of pump - 15 kw/ 20 hp - 2 working the price should include water in oil sensor and io 113 for mechanical seal and motor protections., item no.3: manufacture, supply, lowering, laying, jointing, welding and delivery of electric resistance welded (up to 400mm)/submerged arc welded(above 400mm) m.s.pipe having bevelled ends plate or coil conforming to is-3589-2001 or its latest revision/ amendment for following thickness outside diameter at gwssb store or site anywhere in gujarat state including all taxes, insurance, transportation, freight charges, octroi, inspection charges, loading, unloading conveyance to departmental stores, stacking etc. all complete charwada 2 - jalaram mandir - 219.1 mm dia. (4.5 mm thick)- delivery pipe, balitha 1 - near kabrsthan - 273 mm dia. (5 mm thick)- delivery pipebalitha 2 - bhandarwada - 273 mm dia. (5 mm thick)- delivery pipechhiri 1 vallabh nagar - 273 mm dia. (5 mm thick)- delivery pipe, dungra - azad nagar - 323.9 mm dia. (5.6 mm thick)- delivery pipe vapi - naikwad tanki -

CTN :40218973

13 May, 2025 34.46 Lacs

Channarayapatna - Karnataka

Tender For procurement of lab equipments for quality control lab of no.1 hrbhlc subdivision q.c channarayapatna - supply, installation, testing and commissioning specific gravity bottle-100ml conforming to is2386 mis-401-1 with all lead and lift complete as per directions of the engineer-in-charge of work., supply, installation, testing and commissioning sieves as per is 2720 (part 4) sieve brass frame 20cm dia x 3.35mm , item code aim-05304 with all lead and lift complete as per directions of the engineer-in-charge of work., supply, installation, testing and commissioning sieves as per is 2720 (part 4) sieve brass frame 20cm dia x 10mm , item code aim-05337 with all lead and lift complete as per directions of the engineer-in-charge of work., supply, installation, testing and commissioning environmental test chamber eco friendly with cooling temperature range-10c to 60c +-1c, humidity-50% to 95% + -4%, double walled, inner chamber ss 304, digital controller cum indicator, size - 610x610x610mm, item code aim-9878 with all lead and lift complete as per directions of the engineer-in-charge of work., supply, installation, testing and commissioning digital compression testing machine, capacity 1000kn, range 1000kn, least count 0.1kn, max.clearance between platens 390mm, 260mm, platen size 222.0 dia, piston dia 157mm, piston stroke 50mm, specimen size 100mm & 150mm cube, 100mm dia x 150mm dia cylinder, one electric motor, single phase 220v, 50hz, ac supply digital display, item code aim-314e-dg-1 with all lead and lift complete as per directions of the engineer-in-charge of work., supply, installation, testing and commissioning vibration machine, with built-in digital timer, nabl calibrated - as per is4031, machine is supplied with one cube mould with isi certification mark and poking rod. suitable for operation on 220v, 50hz, single phase, ac supply. item code aim-418-2 with all lead and lift complete as per directions of the engineer-in-charge of work., supply, installation, testing and commissioning sieves as per is 2720 (part 4) sieve brass frame 20cm dia x 90 microns, item code aim-05325 with all lead and lift complete as per directions of the engineer-in-charge of work. , supply, installation, testing and commissioning heating gloves item code aim-132 with all lead and lift complete as per directions of the engineer-in-charge of work., supply, installation,testing and universal automatic compactor aim-11001-ms ,compaction mould 100mm id, 127.3mm height 1000ml volume,complete with collar and base plate, made of mild steel and aim-11101-ms - compaction mould 150mm id, 127.3mm height 2250ml volume, rammer - circular faced 50mm dia adjustable to 2.6kg or 4.9kg weight, drop - adjustable to 310mm or 450mm.with all lead and lift complete as per directions of the engineer-in-charge of work., supply, installation,testing and commissioning digital laboratory california bearing ratio test apparatus , as per is2720 (part xvi). suitable for operation on 220v, 50hz, single phase, ac supply,digital indicator. no of channels - 2 nos, load cell , capacity - 50 kn compression type, maximum overload -110% of the rated capacity, item code aim-121-4-ms with all lead and lift complete as per directions of the engineer-in-charge of work, supply, installation, testing and commissioning core cutter - ref. standard is2720 (part 29) , core cutterof known volume is driven into the soil by a rammer. the core cutter is dug out, trimmed and the soil inside weighed and dried for moisture and density check. replaceable parts steel dolly, 25mm high and 100mm dia item code aim-161 with all lead and lift complete as per directions of the engineer-in-charge of work., supply, installation, testing and commissioning core cutter - ref. standard is 2720 (part 29) , core cutter of known volume is driven into the soil by a rammer. cylindrical core cutter, made of steel 100mm dia x 130mm long, steel dolly, 25mm high and 100mm dia rammer with steel rod item code aim-161 with al

CTN :40218946

13 May, 2025 58.87 Lacs

Tumkur - Karnataka

Tender For procurement of lab equipments for quality control lab of no.29, q.c subdivision tumkur - supply, installation, testing and commissioning laboratory electric oven with digital indicator cum controller with safety alarm, range 50deg to 250 deg c +/-1 deg c with air circulating fan, s.s. inside size 600 x 900 x 450mm item code aim-9109 with all lead and lift complete as per specifications and directions of the engineer-in-charge of work., supply, installation, testing and commissioning of sieve shaker, motorised, with built-in digital timer and 20cm and 30cm dia adaptor suitable for operation on 220v, 50hz, single phase, ac supply with all lead and lift complete as per specifications and directions of the engineer-in-charge of work., supply of mould, steel, for 70.6mm cube-for preparation of mortar and lime cubes, item code aim-414 with all lead and lift complete as per directions of the engineer-in-charge of work., supply, installation, testing and commissioning core cutter machine with all accesories including generator with all lead and lift complete as per directions of the engineer-in-charge of work., supply, installation, testing and commissioning digital compression testing machine, capacity 1000kn, range 1000kn, least count 0.1kn, max.clearance between platens 390mm, max.distance between side plates 260mm, platen size 222.0 dia, piston dia 157mm, piston stroke 50mm, item code aim-314e-dg-1 with all lead and lift complete as per directions of the engineer-in-charge of work., supply of sieve brass frame 20cm dia x 90 microns with all lead and lift complete as per directions of the engineer-in-charge of work., supply of heating gloves with all lead and lift complete as per directions of the engineer-in-charge of work., supply, installation, testing and commissioning swell test apparatus as per is2720 (part 16).capacity 5kn, aim-11001-mould 100mm dia x 1276.3mm height (1000ml volume) with base plate and collar, aim-265 - proving ring, 2.5kn capacity, aim-072 dial gauge 25mm travel, 0.01mm least count, aim-13201, item code aim-132 with all lead and lift complete as per directions of the engineer-in-charge of work., supply, installation, testing and commissioning centrifuge extractor, capacity 1500g electrically operated. the new design of centrifuge extractor is compact with inbuilt dimmerstat for speed veration from 0 rpm to 3600 rpm. suitable for operation on 220 v, 50 hz, single phase, ac supply. each unit is supplied complete with a set of 25 filter paper discs with all lead and lift complete as per specifications and directions of the engineer-in-charge of work., supply, installation, testing and commissioning thermometer ip 16c range 90c to +370c with all lead and lift complete as per directions of the engineer-in-charge of work., supply, installation, testing and commissioning thermometer ip 15c range 5c to +110c with all lead and lift complete as per directions of the engineer-in-charge of work., supply, installation, testing and commissioning ball valve 4mm item code aim-53302 with all lead and lift complete as per directions of the engineer-in-charge of work., supply, installation, testing and commissioning cup 4mm item code aim-53301 with all lead and lift complete as per directions of the engineer-in-charge of work., supply, installation, testing and commissioning thermometer, ip 61c item code aim-56111 with all lead and lift complete as per directions of the engineer-in-charge of work., supply, installation, testing and commissioning thermometer, ip 60c item code aim-56110 with all lead and lift complete as per directions of the engineer-in-charge of work., supply, installation, testing and commissioning ring and ball apparatus. the ring and ball apparatus is a compact user friendly apparatus. it has magnetic stirrer with heating facility and digital display of temperature, the heating can be adjusted through knob in aim 561-1 and can be controlled through the integral pid controlled in aim 561-2. suitable for ope

CTN :40218961

13 May, 2025 31.06 Lacs

Multi City - Karnataka

Tender For procurement of lab equipments for quality control lab of no.2 q c subdivision gorur - supply, installation, testing and commissioning digital thermometer range -50 to 280 deg c , item code aim-9622 with all lead and lift complete as per directions of the engineer-in-charge of work., supply, installation, testing and commissioning specific gravity bottle- 50ml, item code mis-401 with all lead and lift complete as per directions of the engineer-in-charge of work., supply, installation, testing and commissioning environmental test chamber eco friendly with cooling temperature range-10c to 60c +-1c, humidity-50% to 95% + -4%, double walled, inner chamber ss 304, digital controller cum indicator, size - 610x610x610mm, item codeaim-9878 with all lead and lift complete as per directions of the engineer-in-charge of work., supply, installation, testing and commissioning mould, steel, for 70.6mm cube-for preparation of mortar and lime cubes, item code aim-414 with all lead and lift complete as per directions of the engineer-in-charge of work., supply, installation, testing and commissioning vibration machine, with built-in digital timer, nabl calibrated - as per is4031, machine is supplied with one cube mould with isi certification mark and poking rod. suitable for operation on 220v, 50hz, single phase, ac supply. item codeaim-418-2 with all lead and lift complete as per directions of the engineer-in-charge of work., supply, installation, testing and commissioning core cutter - ref. standard is2720 (part 29) , core cutterof known volume is driven into the soil by a rammer. the core cutter is dug out, trimmed and the soil inside weighed and dried for moisture and density check. the equipment consists of the following replaceable partsrammer, with steel rod item codeaim-161 with all lead and lift complete as per directions of the engineer-in-charge of work., supply, installation, testing and commissioning core cutter - ref. standard is2720 (part 29) , core cutterof known volume is driven into the soil by a rammer. the core cutter is dug out, trimmed and the soil inside weighed and dried for moisture and density check. the equipment consists of the following replaceable parts steel dolly, 25mm high and 100mm dia item code aim-161 with all lead and lift complete as per directions of the engineer-in-charge of work., supply, installation, testing and commissioning compaction test apparatus, manual light compaction made of mild steel- as per is 2720 (part 7) the construction quality control is essentially to check the density of compacted soil achieved in the field, thereby checking its strength. item code aim-110-ms with all lead and lift complete as per directions of the engineer-in-charge of work., supply, installation, testing and commissioning laboratory electric oven, with digital indicator cum controller with safety alarm, range 50 deg to 250 deg c +/-1 deg c with air circulating fan, s.s. inside size 600 x 900 x 450mm conforming to is 2720 item code aim-9109 with all lead and lift complete as per directions of the engineer-in-charge of work., supply, installation, testing and commissioning specific gravity bottle-50ml conforming to is2386 item code mis-401 with all lead and lift complete as per directions of the engineer-in-charge of work., supply, installation, testing and commissioning sieves as per is 2720 (part 4) sieve brass frame 20cm dia x 150 microns, item code aim-05322 with all lead and lift complete as per directions of the engineer-in-charge of work., supply, installation, testing and commissioning sieves as per is 2720 (part 4) sieve brass frame 20cm dia x 160 microns, item codeaim-05339 with all lead and lift complete as per directions of the engineer-in-charge of work., supply, installation, testing and commissioning sieves as per is 2720 (part 4) sieve brass frame 20cm dia x 180 microns, item code aim-05321 with all lead and lift complete as per directions of the engineer-in-charge of work., supply, installation, testi

CTN :40218965

13 May, 2025 52.49 Lacs

Multi City - Karnataka

Tender For procurement of lab equipments for quality control lab of no 1 qc subdivision kibbanahalli - supply, instalation, testing and comissioning speedy moisture meter, as per is2720 (part 2), is12175 range 0-25% (gauge div.0.5percent) with digital weighing balance. item code aim-036-1 with all lead and lift complete as per specification and directions of the engineer-in-charge of work., suply, instalation, testing and comissioning laboratory electric oven with digital indicator cum controller with safety alarm, range 50deg to 250 deg c +/-1 deg c item code aim-9109 with all lead and lift complete as per specification and direction of the engineer-in-charge of work., suply, installation, testing and comisioning specific gravity bottle-100ml item code aim-401-1 with all lead and lift complete as per specification and direction of the engineer-in-charge of work., suply, instalation, testing and comissioning specific gravity bottle-50ml item code aim-401 with all lead and lift complete as per specification and direction of the engineer-in-charge of work., suply, instalation, testing and comissioning of sieve shaker, motorised, with built-in digital timer and 20cm and 30cm dia adaptor suitable for operation on 220v, 50hz, single phase, item code aim-054-1 with all lead and lift complete as per specification and direction of the engineer-in-charge of work., suply, installation, testing and comissioning sieves as per is 2720 (part 4) sieve bras frame 20cm dia x 10mm , item code aim-05337 with all lead and lift complete as per directions of the engineer-in-charge of work., suply, installation, testing and comissioning 20cm dia bras frame sieves with all lead and lift complete as per directions of the engineer-in-charge of work., suply, installation, testing and comissioning lechatelier flask - used for the determination of specific gravity of hydraulic cements as specified in is4031-ii, aim-401 with all lead and lift complete as per directions of the engineer-in-charge of work., suply, installation, testing and comissioning digital thermometer range-50 to 280 deg c , aim-9622 with all lead and lift complete as per directions of the engineer-in-charge of work., suply, instalation, testing and comissioning specific gravity bottle-50ml with all lead and lift complete as per specifications and directions of the engineer-in-charge of work., suply, instalation, testing and commissioning environmental test chamber eco friendly with cooling temperature range-10c to 60c +-1c, humidity-50% to 95% + -4%, double walled, inner chamber ss 304, digital controller cum indicator, size - 610x610x610mm, aim-9878 with all lead and lift complete as per directions of the engineer-in-charge of work., suply of mould, steel, for 70.6mm cube-for preparation of mortar and lime cubes, aim-414 with all lead and lift complete as per direction of the engineer-in-charge of work., spply, instalation, testing and comisioning vicat apparatus with isi certification mark is5513 fitted in aluminium box. item code aim-394 with all lead and lift complete as per specifiations and directions of the engineer-in-charge of work., suply, installation, testing and commisioning le-chatelier mould, with isi certification mark is 5514, each (resistance of mould test apparatus). supplied complete with over weight 300g +/- 1 g item code aim-400 with all lead and lift complete as per direction of the engineer-in-charge of work., suply, instalation, testing and commisioning vibration machine, with built-in digital timer, nabl calibrated - as per is4031, machine is supplied with one cube mould with isi certification mark and poking rod. suitable for operation on 220v, 50hz, single phase, ac supply. item code aim-418-2 with all lead and lift complete as per direction of the engineer-in-charge of work., suply of heating glove with all lead and lift complete as per direction of the engineer-in-charge of work., suply, installation, testing and comissioning swell test apparatus as per is2720 (part 16

CTN :40218968

13 May, 2025 53.37 Lacs

Multi City - Karnataka

Tender For procurement of lab equipments for quality control lab of no 3 qc subdivision yediyur - supply, instalation, testing and commisioning core cutter - ref. standard is 2720 (part 29) , core cutter of known volume is driven into the soil by a rammer. the core cutter is dug out, trimmed and the soil inside weighed and dried for moisture and density check. aim-161 with all lead and lift complete as per direction of the engineer-in-charge of work., supply, installation, testing and commissioning sample tray (enamel tray), size 200x150x30mm with all lead and lift complete as per specification and direction of the engineer-in-charge of work., supply, installation, testing and commisioning sample tray (enamel tray), size 300x250x40mm with all lead and lift complete as per specification and direction of the engineer-in-charge of work., suply, installation, testing and commisioning sample tray (enamel tray), size 450x300x40mm with all lead and lift complete as per specification and direction of the engineer-in-charge of work., supply, instalation, testing and commisioning sample tray (enamel tray), size 600x450x50mm with all lead and lift complete as per specification and direction of the engineer-in-charge of work., suply of sample tray (enamel tray), size 50x500x50mm with all lead and lift complete as per specification and direction of the engineer-in-charge of work., supply, instalation, testing and commissioning compaction test apparatus, manual light compaction made of mild steel-as per is 2720 (part 7) the construction quality control is essentially to check the density of compacted soil achieved in the field, there by checking its strength. aim-110-ms with all lead and lift complete as per specification and direction of the engineer-in-charge of work., supply, instalation, testing and comissioning speedy moisture meter, as per is2720 (part 2), is12175 range 0-25% (gauge div.0.5percent) with digital weighing balance. calcium carbide reagent, moisture gauge, 0-25% x 0.5%, digital balance, 50g, steel balls, 12.7mm dia and 25mm dia, scoop, cleaning brush, aluminum dish. item code aim-036-1 with all lead and lift complete as per specification and directions of the engineer-in-charge of work., suply, instalation, testing and comissioning micro oven with all lead and lift complete as per specification and direction of the engineer-in-charge of work., suply, instalation, testing and comissioning laboratory electric oven with digital indicator cum controller with safety alarm, range 50deg to 250 deg c +/-1 deg c with air circulating fan, s.s. inside size 600 x 900 x 450mm item code aim-9109 with all lead and lift complete as per specification and direction of the engineer-in-charge of work., supply, installation, testing and comisioning specific gravity bottle-100ml item code aim-401-1 with all lead and lift complete as per specification and direction of the engineer-in-charge of work., suply, installation, testing and comissioning specific gravity bottle-50ml item code aim-401 with all lead and lift complete as per specification and directions of the engineer-in-charge of work., suply, installation, testing and commissioning of sieve shaker, motorised, with built-in digital timer and 20cm and 30cm dia adaptor suitable for operation on 220v, 50hz, single phase, ac supply item code aim-054-1 with all lead and lift complete as per specification and direction of the engineer-in-charge of work., suply, installation, testing and comissioning sieves as per is 2720 (part 4) sieve brass frame 20cm dia x 1.6mm, item codeaim-05338 with all lead and lift complete as per directions of the engineer-in-charge of work., suply, installation, testing and comissioning sieves as per is 2720 (part 4) sieve brass frame 20cm dia x 1.70mm, item codeaim-05308 with all lead and lift complete as per directions of the engineer-in-charge of work., suply, installation, testing and comissioning sieves as per is 2720 (part 4) sieve brass frame 20cm dia x 2.00mm , item cod

Central Government/Public Sector

CTN :39860490

09 May, 2025 NA

Erode - Tamil Nadu

Tender For push button for emergency stop with contact arrangement 1 no + 1 nc for conventional wag-7/wap-4 electric loco motives as per clw specification no. clw/es/3/0077 alt.-a and clw drg. no. clw/es/3/sk-1/0077/a. note: 1. supply by sources as per clw item id: 2100028 in ireps vendor directory. 2. firm should submit authorised dealership certificate along with tender o therwise offer will not be considered. [ warranty period: 30 months after the date of delivery ]

Co-operative

CTN :40220597

14 May, 2025 24.3 Thousand

Mehsana - Gujarat

Tender For electric item - 3256015, 5.000, each lenth - 3 mtr.20 mm(an iso 9001-2008 certified co.) 1.2 mm, 3078131, 50.000, 20 mm100 iso 9001-2008 certified co.) 1.2 mm, 3219840, 50.000, 20 mm100 iso 9001-2008 certified co.) 1.2 mm, 3004781, 50.000, capacitor,manufacturer-tipcon/keltron,type- running capacitor,voltage rating-230/440v ac.mfd range-2.5mfd, 3009589, 25.000, 3 pin top 6ae -16 a,make- anchor, 3300701, 25.000, make- hi-fi/anchor/havells, 3256022, 15.000, capacitor,230/440v ac,6/6.3mfd, 3312021, 50.000

State Government

CTN :40172869

14 May, 2025 70.0 Thousand

Chhindwara - Madhya Pradesh

Tender For purchase electricity item - led bulb (20 watt), led bulb (15 watt), wire bundle(1/18 coper), wire bundle(1/18 aluminium), holder, switch, power plug, motor binding fan, motor binding tubewel, starter tube wel, cuttout 15 ampiere, condensior, electric tape, led 50w

Lt Protection Kit Scrap Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Co-operative

State Government