Latest lt system repair Tenders | Government lt system repair Tenders

CTN :44550254

13 Jun, 2026 NA

Goa - Goa

Tender For bid to ras corrigendum : supply of vms software application life time , software application server system , user application system and display unit , utp cat 6 outdoor armoured copper cable , ups 3750 plus 36 v 200ah including 03 batteries , online ups rt 2kv 1800w 0.9 pf 72v internal batteries 6x7 ah batteries , ups line entire software application system including cabling , hardware and networking cabling laying piping digging , customized outdoor 32 inch screen fabrication ip67 with pole smps power modular with cooling fan , rfid hf mi-fare smart card , rfid hf mi- fare card dual side printer including life time software , rfid hf token keyfob , other fabrication work , networking and configuration of entire system , optical fibre cable 6 core single mode including cabling laying piping and digging trenching and refilling the same after laying ug cables , 10 port data switch ten and hundred and thousand mbps with sfp modular manageable switch ) /bid number : gem/2026/b/7373023 * /dated: 18-03-2026 & & / bid document 1 / 18

State Government

CTN :45231232

11 Jun, 2026 NA

Ghaziabad - Uttar Pradesh

Tender For corrigendum : supply and execution items for reliability improvement of signalling inst. section of sr. dste/1/lko of lucknow div. nr. - excavating and refilling of trench to the level of ground with rammed earth asper drg. no.(nr/s&t/con/1.1/97a) so as not to form a drain 0.3 mtrs wide & 1mtr deep on both side of the station along side the track. it shall confirm to the safe distance as per signalling and cable plan in all type of soil, it also includes clearence of roots of trees and bushes., excavating and refilling of trench 0.3 mtrs wide & 0.8 mtr deep on pitced/stone/bricks paved surface, road/crossing/platform etc. and restoration of surafce to original condition., laying of signalling/telecom/power cables of different sizes as per attached guidelines (drg. no.(nr/s&t/con/1.1/97a) or latest on signalling cable laying and as per cable route plan approved by railways through trenches, rcc pipe, dwc pipe, gi pipe etc and meggering of cable before and after its laying of all type of outdoor cables. contractor have to transport cable from any store of lko division to site carefully. meggering to be done for each drum separately. meggering sheets to be supplied and filled up by contractor and submitted to railways, as per instructions by consignee., supply and laying of 2nd class bricks in the trench and laying as per drg. no. (nr/s&t/con./1.1/97a) or latest and as per instruction of the site engineer., boring and trenchless cabling along with supply and insertion of hdpe/dwc self lubricated pipes as per rdso spec no. rdso/spn/204/2011 ver 1.1 or latest of 120mm nominal dia in the bore at the depth of 1.4 meter to 2.1 meter from formation level (level of earth below ballast) as per drawing and as directed by engineer incharge by trenchless technology for laying of signalling /telecom/power cable under track /culvert etc. cable laying covered separately. inspection-consignee for supply of dwc/hdpe pipe. the following required coupling arrangement should also be supplied: 1. suitable snap fit couplers withrubber o ring, 2. spacers, 3. tees. 4. bend. 5. end cap(1 no. =6mtr ,straigh tpipe). (a) the cost shall include horizontal boring through any intermediate obstruction, either natural or man made or any boundary etc. (b) the rate is inclusive of all the materials equipment and labour required for during trenchless horizontal boring under the railway track. nothing extra shall be admissible on any account than the rate quoted above. (c) the pipeis to be laid underrailway track/road /culvert. all necessary arrangement are to be provideand all precautions are to be end is not deviated from the horizontal level line by more than 250mm in horizontal and vertical direction. (d) the rate shall be inclusive of direction and protection of underground utilities encountered during boring. (e) the payment for boring shall be made only when dwc/hdpe pipe are laid in the bore., concreting unschduled items in concrete of 1:3:6 ratio in cement, coarse sand and aggregate 25mm at different places in the yard and plastering top in fine plaster of 1:4 cement sand ratio. it also includes the excavation of earth as required at site and as per instruction of site incharge. the volume in cubic metres shall include the volume occupied by any ci foundation, trestle, ms angle or flat or gi pipe required to be embedded in the casting. cement coarse sand and aggregate 25mm are to be supplied by the contractor., earth work for excavation and refilling around location boxes and signals etc. where necessary including 50m lead and 1.5m lift. the lead is to be measured from centre of gravity of location to the centre of filling and lift from main ground level. the earth work should be well rammed including breaking of clods, levelling and dressing etc. as per instruction of engineer at site., brick work with well burnt bricks in foundations and plinths with cement and sand (ordinary) mixture of 1:4 ratio. all material is to be supplied by th

Central Government/Public Sector

CTN :45463412

22 Jun, 2026 10.44 Lacs

Dipka - Chhattisgarh

Tender For dismantling of existing steel tower and diversion of 33kv feeder no. 12 and feeder no. 13 by laying of 33kv grade cable and for providing overhead line for 33kv 12 and 13 no. feeder near silo 5 and 6 under power supply of gevra project

corporations/Associations/Others

CTN :45474154

29 Jun, 2026 4.69 Crore

Ajmer - Rajasthan

Tender For providing laying and shifting of power line at industrial area udaipur khurd

State Government

CTN :45444173

12 Jun, 2026 3.69 Lacs

Kangra - Himachal Pradesh

Tender For providing and laying of water supply line from water storage tank to hpsebl colony at jia minor repair work of building at intake under baner power house division hpsebl jia for the year 2026 27

CTN :45436112

23 Jul, 2026 NA

Multi City - Multi State

Tender For request for proposal for construction of the km: 400.169 to km: 391.898 for 3rd line i.e. the 8.271 km and the km: 403.005 to km: 392.300 for 4th line i.e. the 10.705 km, total 18.976 km between sini and kandra junction, complete gauge conversion of the existing track over the same stretch, civil engineering works: earthwork in formation including cutting, filling, blanketing, turfing for new track alignment, extension and strengthening of minor bridges and construction of major bridges, construction of side drains for proper drainage, permanent way works including track linking and alignment, supply and laying of 50 mm machine crushed stone ballast as per railway specifications, associated civil and track works at sini and kandra block sections to support the new lines and gauge conversion, execution of indoor & outdoor s&t works in connection with clearance of infringement to facilitates the civil works for the 3rd and 4th lines in the sini-kandra block section, execution of general electrical works, installation and commissioning of overhead equipment (ohe) for traction and power supply of chakradharpur division on s. e. railway on engineering, procurement & construction (epc) mode.

State Government

CTN :45088300

11 Jun, 2026 6.71 Lacs

East Nimar - Madhya Pradesh

Tender For corrigendum : work for providing and laying dry stone pitching at embankment slope of railway line between railway gate and underpass along boundary wall at shree singaji thermal power project (sstpp) khandwa.

CTN :45438320

25 Jun, 2026 45.00 Lacs

Ranga Reddy-T - Telangana

Tender For supply of providing and laying of painting works , patch works , waterproofing works , dismantling false ceiling , dismantling bison board , dismantling woden partistion , window closing , dismantling existing washbasin , cleaning , room 3 , providing toilets , toilet renovation works , roofing and false celing works , room 9 , floor patch works , dismantling of toilets , dismantling damaged windows , room 14 15 , dismantling existing doors , repairs to existing ventilator windows , dismantling existing wall and floor tiles , structural repair and opening modification works , dismantling brick structure and floor repair , dismantling and vegetation removal , dismantling existing broken and damaged glass panes , cpvc water supply line , site clearance and general demolition works , anti termite treatment , rodent and pest control treatment , overhead water tank cleaning repair and disinfection , storm water drain and surface drainage , signage and room identification , comprehensive checking of 1 nos 250 kva outdoor type substations including inspection , aluminium paint , servicing of existing 11 kv 400 amps 3 pole gang operated type air break ab switch , supplying and replacing damaged or worn out copper metal , supplying and replacing damaged or defective 11 kv post top insulators , supplying and replacing damaged or defective 11 kv pin type insulators , servicing of earth pits , supply installation testing and commissioning lbs , xlpe insulated aluminium conductor armoured ht cable , providing indoor or outdoor type heat shrinkable , supplying and laying of 3.5 core x 240 sq.mm 1.1 kv grade aluminium conductor xlpe insulated , supplying and making end termination for 3.5 core x 240 sq.mm 1.1 kv grade , joint for existing single run lt power cable of size 3.5 core x 240 sq.mm , comprehensive servicing and preventive maintenance of existing ht transformer , supply, fixing, installation, testing and commissioning of lightning arrester , providing and fixing cable identification tags , supply, installation, testing and commissioning sitc main mv panel , supply, installation, testing and commissioning sitc cubicle pdb panel , supply, installation, testing and commissioning sitc feeder pillar box , providing and installation of maintenance free earthing station , supplying and laying of 3.5 core x 120 sq.mm 1.1 kv grade aluminium conductor xlpe insulated , providing laying and fixing of overhead perforated or slotted ms cable tray , supply installation testing and commissioning 7 segment distribution board , providing fabricating supplying, installing testing and commissioning of electrical socket box

State Government

CTN :45069610

09 Jun, 2026 25.11 Lacs

Secunderabad - Telangana

Tender For corrigendum : bifurcation of 11 kv sanjeevpuram feeder emanating from 33/11 kv zamisthanpur ss and srinivasa nagar feeder emanating from 33/11kv seethaphalmandi ss by erection of new 11kv feeder from 33/11kv seethaphalmandi ss which involves laying of 1.46km 11kv 3x300sqmm xlpe ug cable (double run) up to the existing pole of the autorecloser point and line ab switch near vinayaka gods power gym along with erection of 1no. 11 kv feeder vcb at 33/11kv seethaphalmandi ss in seethaphalmandi section of padmarao nagar sub-division in paradise division of secunderabad circle under t and d improvements to original works under general category.

Central Government/Public Sector

CTN :45365796

27 Jun, 2026 11.50 Lacs

Jammu - Jammu And Kashmir

Tender For repair resurfacing of certain roads and connected items at bd bari mil stn - m&l preparing black top surfaces by brushing with wire brushes for removing caked mud etc. sweeping with wire brush/brooms and finally fanning the cleaned surface with gunny bags or by mechanical blower to remove all loose dirt etc to black top surfaces, and applying evenly a priming/tack (viscosity grade paving bitumen of grade vg-10) @ 5 kg per 10 sqm to road surface bituminous asphaltic semi dense concrete consolidated thickness 30 mm with stone chippings graded aggregate with 5.5% of binder content by weight of total mix, (viscosity grade paving bitumen of grade vg-30) and 4% stone dust conforming to required specification for filler as per irc-95, 1987 (filler) by weight of mix, prepared in hot mix plant, rolled and compacted to required camber and gradient to uniform smooth surfaces by mechanical paver and rolled with 8 to 10 tone power roller completed all as specified and as directed., m&l for repair to potholes, any depth ,not exceeding 1 sqm each including sweeping free from dust and mud or water, scoring sunken surfaces in roads, path etc, cutting around edges to at least 25mm in depth, making good by filling in screened and graded road metal, watering and well ramming, applying tack coat with (viscosity grade paving bitumen of grade vg-10) @ 10.0 kg per 10 sqm of surface putting in & including premixed bituminous macadam, well rammed and sealed with binder 9.80 kg/sqm, blinded with 0.09 cum of stone chippings, 6.3mm size and again well rammed, rolled and compacted to required camber and gradient to uniform smooth surfaces by mechanical paver and using with 8 to 12 tonne power roller (including supply of premixed macadam, binder and chippings),completed all as specified and as directed., premix bituminous macadam laid / rolled and compacted using 8 to 12 tonne power roller to required gradient and camber, with broken stone graded aggregate with 4% of paving bitumen binder of viscosity grade vg-30 grade by weight of toal mix (consolidated thickness 75mm or less) completed all as specified and as directed., m&l providing and laying at or near ground level factory made kerb stone of m-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required completed all as specified and as directed., m&l for marking lines 2.5 mm thick, dashes arrows etc of any description n. exc 10cm width/girth on road surface using hot applied thermo plastic road marking paint of approved colour confirming to bs-3262-1989 with special applicator machine all as per manufacturere instruction completed all as specified and as directed., supply and fix solar cat eye (green/red) aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency mono rystafie solar panel 2.4v/ 0.3 watt one ni-ed rechargeable battery (1.2v/ 1600ma) consisting of super bright led with 10,000 to 18,000 mcd completed as per manufactures instructions etc completed all as specified and as directed., supply and fixing metal tubular dealineator made out of abs round body fitted with 2 nos 65 mm dia highly reflective reflectors made out of and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in pcc 1:2:4 (150x150x300mm) type b1 complete all as specified and directed, s&f manufacturing, supplying and fixing retro reflective mandatory/ regulatory sign boards of 900 mm diametre with support length of 3750 mm and made up of 2 mm thick aluminium sheet, face to be fully covered wi

Lt System Repair Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

corporations/Associations/Others

State Government

State Government

State Government

Central Government/Public Sector