Latest lub oil pump Tenders | Government lub oil pump Tenders

Central Government/Public Sector

CTN :43088713

05 Jan, 2026 NA

Patratu - Jharkhand

Tender For supply of lube oil pump assly

State Government

CTN :43061677

12 Dec, 2025 NA

Delhi - Delhi

Tender For strengthening of (e/m) equipments of various tube wells installed at babu park kotla area under kasturba nagar constituency ac-42 . - s/o double flanged g.i pipe of 50 mm dia. medium class each of 3 mtrs long duly threaded on both ends welded and fitted with g.i flange on both ends having the slot for sub cable.make: - tata/jindal, supply of out door type 7.5 to 10hp hut type electrical feeder pillar/metal board of welded construction of size 1370mm x 760mm x 460mmfabricated with 16 swg m.s. sheet with horizontal and vertical intermediate chamber of suitable size onsuitable size insulating board to make the panel robust, having double door with 14 swg s.s hinges along with double locking arrangement with arrangement for mounting of switch gear and electrical energy meter i/c powder coating, vermin proof having following items.1. mccb 63 amp, 4 pole-1 no2. rccb/elcb 63 amp, 4 pole with earth fault indicator and positive contact indication protecting a circuit automatically 1no3. fully automatic star delta starter of 10hp, 3phase oil immersed type 1no4. digital ampere meter 96mmx96mm square shape of 0-30 amp range 1no5. digital voltmeter of 96mm x 96 mm square shape of 0-500 volt range with selector switch 1no6. led indicating lamps with fitting (a set of 3 lamps) 1set7. shunt capacitor of 5 kvar with three phase isolator 1no8. motor protection assembly having earth leakage protection, phase sequence corrector, single phasing protection, over load protection, high voltage-low voltage protection. 1no9. programmable time switch (i.e. ryb phase & facility to change over from automatic to manual & vice versa) up to 10 h.p.1no10. complete wiring of panel board & installation of electrical accessories in the panel with required copper conductor wire & thimbling etc.as required. the panel board shall be mounted on the base frame of 600mm height made of 50x50x6mm angle iron frame.make:-all the insert used in panel must be of djb approved makes and should be isi marked where make of that equipment is not approved.djb item code 10.2.1, supply of pvc insulated pvc sheathed copper conductor flat cable size 3 core x 4sq mm,1100 volts, confirming to is 694(each roll 100mtr long) make: finolex / havells./kei/any djb approved make., s/o nut bolts,washer dia 1 long full threaded, s/o rubber packing 50 mm dia. flange., lowering and lifting of sub/sets from bore by taking out double flanged gi pipes, submersible p/set, cable, cutting of rusted nuts and bolts etc and replacement of damaged d/f gi pipes, cable, defective pump set etc as per site requirement and lowering of sub p/set, sub cable, gi pipe etc as required, jointing of cable from sub p/set along with holding of cable with pipes and jointing of d/f pipes etc with nuts bolts and rubber packing etc. the job includes hiring of all t&p, tripod stand, chain pulley block and other material handling equipments, safety gadgets ad required and consumable material (rubber packing and nuts bolts) will be arranged by the firm as per site requirement. the other material required during execution will be provided by department.

Corporations/Associations/Others

CTN :43050100

12 Dec, 2025 1.39 Crore

Ichalkaranji - Maharashtra

Tender For providing supplying submersible pump, and allied material for newly 100 drilled boarwells in ichalkaranji municipal corporation- providing, crecting and giving test of mjf approved submersible pump set 150 mm din, 3 h.p. of conforming to is, 3034 and moter conforming to 15 9283 with waterproof winding pump shall be suitable for various delivery head and discharge with stainless steel shaft. motor suitable for working on 415v+ 10%, 3 ph. 50 hz a.c. supply, with cable guard, thrust carben/fibre bearing to withstand entire hydraulic thrust. the pump set shall be suitable for direct coupling, with suitable suction strainer. pump should have suitable discharge outlet as per manufacturer's design. anti-thrust stream lined non-retum valve shall be provide with pump. 3 m submersible copper conductor cable in single/double run and 2 pairs of suitable size, crection clamo 10 mm thick shall he acided with man. test submersible pump set 100 men dia (with polypropylene/noryl impeller) up to 20 stagos 3.0 hp, submersible pump 150 mm dia (with bronze/stainless steel (cf8m) impeller) up to 8 stages, (mjp e/m csr 2023-34 pm 1-1-4, pm1-3-3, p-182), supplying and erecting isi mark gl pipe 50 mm dia. b' class ar position with accessories complete. specification no. cw-plb/gp., (pwd electrical csr 2023-24, 16-5-6, 21, supplying, crecting, testing and commissioning of flat flexible 3 core 2.5 sq.mm pvc sheathed submersible type copper cable suitably clamped at fixed intervals with coluran pipe assembly complete., (pwd electrical csr 2023-24, 12-4-8), supplying & erecting bore plate, clamps, nurbolts, (market rate), supplying and erecting "b' class gi coupling nipple of 50 mm dia. in position with necessary material., (mup e/m csr 23-24, pw 3-4, pg-08), supplying and crecting 'b' class gf tee of 50 mm dia. in position with necessary material., (mup em csr 23-24 pw 5-3, p-08), supplying and crecting rolled steel jnist (ginfer) pole 125 * 70 mm (13.3kp / m) with base plate in provided foundation as per specification no. oh-plrsi, pwd dsr 2023-24, moking cement conerese foundation including excavation (45 * 45 * 120) * cm deep in 1:3:6 cement concrete, 20 to 25 mm stone metal. (45 * 45 * 45) * cm / 45 * cm dia. x 45cm height plinth duly plastered, with necessary curing and finishing complete (for 6m pole), pwd dsr 2023-24 item no 16-3-2, supplying, crecting, testing & commisioning gl sheet 0.6 mm (24 swg) having zine conting of 275 microns with gaivarization process compliance to is 2629:1985 to be used for fabrication of boses panel boants etc. including cutting. bending, drilling, welding, riveting etc. and painting with one coat of red lead paint and 2 coats of enamel peint as per specification no. cp/sh/cr, 12^ * in\$0^ * 0.15 = 0.15, 2 12^ * 0.150^ * 0.3 - 0.09, 312^ * 0.150^ * 0.5 - 0.15, 1.09 sqm, pwd dsr 2023-2416-1-2, supplying, erecting, testing & commisioning plywood 6 mm thick fixed to wall. or on provided panel board with necessary materials such as screws, wall fasteners supports, nuts bolts etc. complete as per specification no. cp/sh/cr, pwd dsr 2023-2416-1-2, supplying, installing and testing pipe type carthing with 40mm, dia. g.l. pipe or 20 mm dia. g.i. rod complete with all accessories of gl materials & recording the results as per specification no. eα-ερ, pwd dsr 2023-2416-1-11, supplying, erecting, testing and commissioning of automatic control panel for three phase, 415 v, a.c. supply, submersible/centrifugal pump set upto 7.5 hp consisting of d.o.l.. starter having relay range 9-14 a, s.p.p., combined ammeter/voltmeter, phase indicating lamp enclosed in crca powder coated vibration proof enclosure with ip54 protection with single phasing, phase reversal, phase imbalance, etc., pwd dsr 2023-24 12-4-17, supplying and erecting mains with wp 2 x 6 sq. mm. 1.ikv. grade aluminium pvc insulated and pvc sheathed wires on g.i. bearer wire no. 8 swg complete erected with required size of porcelain reel insulators and 16 sw

Corporations/Associations/Others

CTN :43050103

12 Dec, 2025 1.49 Crore

Ichalkaranji - Maharashtra

Tender For 2 .providing supplying submersible pump, and allied material for newly 107 drilled boarwells in ichalkaranji municipal corporation- providing, crecting and giving test of mjf approved submersible pump set 150 mm din, 3 h.p. of conforming to is, 3034 and moter conforming to 15 9283 with waterproof winding pump shall be suitable for various delivery head and discharge with stainless steel shaft. motor suitable for working on 415v+ 10%, 3 ph. 50 hz a.c. supply, with cable guard, thrust carben/fibre bearing to withstand entire hydraulic thrust. the pump set shall be suitable for direct coupling, with suitable suction strainer. pump should have suitable discharge outlet as per manufacturer's design. anti-thrust stream lined non-retum valve shall be provide with pump. 3 m submersible copper conductor cable in single/double run and 2 pairs of suitable size, crection clamo 10 mm thick shall he acided with man. test submersible pump set 100 men dia (with polypropylene/noryl impeller) up to 20 stagos 3.0 hp, submersible pump 150 mm dia (with bronze/stainless steel (cf8m) impeller) up to 8 stages, (mjp e/m csr 2023-34 pm 1-1-4, pm1-3-3, p-182), supplying and erecting isi mark gl pipe 50 mm dia. b' class ar position with accessories complete. specification no. cw-plb/gp., (pwd electrical csr 2023-24, 16-5-6, 21, supplying, crecting, testing and commissioning of flat flexible 3 core 2.5 sq.mm pvc sheathed submersible type copper cable suitably clamped at fixed intervals with coluran pipe assembly complete., (pwd electrical csr 2023-24, 12-4-8), supplying & erecting bore plate, clamps, nurbolts, (market rate), supplying and erecting "b' class gi coupling nipple of 50 mm dia. in position with necessary material., (mup e/m csr 23-24, pw 3-4, pg-08), supplying and crecting 'b' class gf tee of 50 mm dia. in position with necessary material., (mup em csr 23-24 pw 5-3, p-08), supplying and crecting rolled steel jnist (ginfer) pole 125 * 70 mm (13.3kp / m) with base plate in provided foundation as per specification no. oh-plrsi, pwd dsr 2023-24, moking cement conerese foundation including excavation (45 * 45 * 120) * cm deep in 1:3:6 cement concrete, 20 to 25 mm stone metal. (45 * 45 * 45) * cm / 45 * cm dia. x 45cm height plinth duly plastered, with necessary curing and finishing complete (for 6m pole), pwd dsr 2023-24 item no 16-3-2, supplying, crecting, testing & commisioning gl sheet 0.6 mm (24 swg) having zine conting of 275 microns with gaivarization process compliance to is 2629:1985 to be used for fabrication of boses panel boants etc. including cutting. bending, drilling, welding, riveting etc. and painting with one coat of red lead paint and 2 coats of enamel peint as per specification no. cp/sh/cr, 12^ * in\$0^ * 0.15 = 0.15, 2 12^ * 0.150^ * 0.3 - 0.09, 312^ * 0.150^ * 0.5 - 0.15, 1.09 sqm, pwd dsr 2023-2416-1-2, supplying, erecting, testing & commisioning plywood 6 mm thick fixed to wall. or on provided panel board with necessary materials such as screws, wall fasteners supports, nuts bolts etc. complete as per specification no. cp/sh/cr, pwd dsr 2023-2416-1-2, supplying, installing and testing pipe type carthing with 40mm, dia. g.l. pipe or 20 mm dia. g.i. rod complete with all accessories of gl materials & recording the results as per specification no. eα-ερ, pwd dsr 2023-2416-1-11, supplying, erecting, testing and commissioning of automatic control panel for three phase, 415 v, a.c. supply, submersible/centrifugal pump set upto 7.5 hp consisting of d.o.l.. starter having relay range 9-14 a, s.p.p., combined ammeter/voltmeter, phase indicating lamp enclosed in crca powder coated vibration proof enclosure with ip54 protection with single phasing, phase reversal, phase imbalance, etc., pwd dsr 2023-24 12-4-17, supplying and erecting mains with wp 2 x 6 sq. mm. 1.ikv. grade aluminium pvc insulated and pvc sheathed wires on g.i. bearer wire no. 8 swg complete erected with required size of porcelain reel insulators and 16

Central Government And Public Sector

CTN :43079887

26 Dec, 2025 NA

Lumding - Assam

Tender For supply of shaft as per item 1 of attached specification document , impeller asper item 2 of attached specification document , pump impeller as peritem 3 of attached specificaiton document , pump shaft as per item 4 of attched specification document , de suitable for pmps as per item 5 of attached specification document , nde suitable for pumps as per item 6 of attached specification document

Central Government/Public Sector

CTN :43017070

10 Dec, 2025 NA

Raipur - Chhattisgarh

Tender For corrigendum : mechanical seals for lube oil pumps for xrp 883 mill stage i 4x210 mw at ncps dadri

Central Government And Public Sector

CTN :43049308

26 Dec, 2025 NA

Kudankulam - Tamil Nadu

Tender For supply of bearing rtd for pump and motors, size 8mm, specifications as per item 1 in annexure a, b , bearing rtd for pump and motors, size 5mm, specifications as per item 2 in annexure a, b , process rtd, size 8mm, connection m20 x 1. 5, specifications as per item no 3 in annexure a, b , process rtd, size 6mm, connection m20 x 1. 5, specifications as per item no 4 in annexure a, b , process rtd, size 3mm, connection m10 x 1, specifications as per item no 5 in annexure a, b , lumpsum testing charges for the rtds. minimum 1 no of rtd unless specified separately in annexure a from each of the 5 types of rtds mentioned in annexure a shall be tested as per the specifications

Central Government/Public Sector

CTN :42755871

10 Dec, 2025 NA

Delhi - Delhi

Tender For corrigendum : supply of item: pump centrifugal vertical spp - (204-p-1005 a/s) group a1, sour water blowdown pump, (261-p-2001 a/b) group a2, solvent transfer pump

Central Government And Public Sector

CTN :43026889

15 Dec, 2025 NA

Damanjodi - Odisha

Tender For tender for supply of procurement of netzsch make progressive cavity pump d d - technical specification as item specification document , technical specification as item specification document , technical specification as item specification document , technical specification as item specification document , technical specification as item specification document

corporations/Associations/Others

CTN :43051655

19 Dec, 2025 NA

Atthipattu Puthunagar - Tamil Nadu

Tender For procurement of triple screw lube oil pumps suitable for air pre heaters support guide bearings lubrication systems in 800 mw boiler

Lub Oil Pump Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors