Latest lube oil cooler Tenders | Government lube oil cooler Tenders

State Government

CTN :44883821

14 Jul, 2026 NA

Gandhinagar - Gujarat

Tender For corrigendum : supply of tubes and work of insitu retubing as per atc d d - aluminium brass seamless cold drawn tubes , end plate having size of o.d. 267mm, thickness 16.5mm, 190nos. of holes and material s.s. 304 for lube oil cooler of bfp unitunit no. 3 and 4 gtps. , end plate having size of o.d. 205mm, thickness 32mm, 190nos. of holes and material s.s. 304 for lube oil cooler of bfp unitunit no. 3 and 4 gtps. , end plate having size of o.d. 330mm, thickness 25mm, 320nos. of holes and material s.s. 304 for working oil cooler of bfp unitunit no. 3 and 4 gtps. , end plate having size of o.d. 260mm, thickness 40mm, 320nos. of holes and material s.s. 304 for working oil cooler of bfp unitunit no. 3 and 4 gtps. , baffles having size of o.d. 205mm, thickness 04mm both end chamfer and material s.s. 304 for lube oil cooler of bfp unitunit no. 3 and 4 gtps. , 01set equals to 25nos. , baffles having size of o.d. 260mm, thickness 04mm both end chamfer and material s.s. 304 for working oil cooler of bfp unitunit no. 3 and 4 gtps. , 01set equals to 19nos. , work of complete in situ re tubing of old damaged tube cooler of lube oil cooler of 210mw unit no. 3 and 4 as per atc , work of complete in situ re tubing of old damaged tube cooler of working oil cooler of 210mw unit no. 3 and 4 as per atc ) /bid number : gem/2026/b/7336822 * /dated: 14-04-2026 & & / bid document 1 / 12

Central Government/Public Sector

CTN :45713891

20 Jul, 2026 20.00 Lacs

Chandimandir - Haryana

Tender For repair / maint of split acs 2/1.5 ton , windows acs 2 / 1.5 ton , voltage stablizers and connected items installed at command hospital (wc) and other various location in aor of age e/m ch - servicing of split type ac of capacity 2/ 1.5 tr after disconnecting all incoming and outgoing electric connection, water drain pipe line connection etc. and wash with approved chemical mixed water with the pressure pump, after servicing cleaned all the disturbed area and reassembling the water/electric connection and testing for entire satisfaction of engr-in-charge., all as per item no. 1 here-in-above but window type ac 2/1.5 tr capacity., supplying and charging of refrigerant gas r-22 only after vacuuming dehydration, leak testing of the system as per standard practice testing for proper cooling effects and satisfactory performance complete all as specified and as directed by engr-in-charge for room split/window type ac of capacity 2/1.5 tr., all as per item no: 3 above but gas r-32, all as per item no: 3 above but gas r-410a., all as per item no: 3 above but gas r-134a., taking out defective capacitor of capacity 50+6 mfd after disconnecting all incoming and outgoing electric connection including supply & fix new capacitor on same place and testing complete all as specified and as directed by engr-in-charge, all as per item no:7 here in above but of capacity 45+4 mfd ., all as per item no:7 here in above but of capacity 45 mfd ., all as per item no: 7 here in above but of capacity 6 mfd ., all as per item no: 7 here in above but of capacity 4 mfd ., supply & fixing as in replacement copper pipe 1/2" for liquid line including fittings and testing complete all as specified and as directed by engr-in-charge., supply & fixing as in replacement copper pipe 1/4" for liquid line including fittings and testing complete all as specified and as directed by engr-in-charge., supply & fixing as in replacement copper pipe 5/8" for liquid line including fittings and testing complete all as specified and as directed by engr-in-charge., supply & fixing as in replacement copper pipe 3/8" for liquid line including fittings and testing complete all as specified and as directed by engr-in-charge., supply and fixing of insulation foam for copper pipe of size 1/2" after removing old one., supply and fixing of insulation foam for copper pipe of size 1/4" after removing old one., supply and fixing of insulation foam for copper pipe of size 5/8" after removing old one., supply and fixing of insulation foam for copper pipe of size 3/8" after removing old one., supply and fixing as in replacement of pvc flexible pipe 15 mm dia including any fittings as required complete inclusive of any type of leakage testing., all as per item no: 20 above but pipe of 20 mm dia., supply and fixing as in replacement of pvc water drain pipe 25 mm dia complete inclusive all fittings and any type of leakage testing., material and labour for sub main wiring with 2 x 2.5 sqmm +1 x 2.5 sqmm single core flame retardant pvc insulated unsheathed cable with stranded copper conductor drawn in and including heavy grade frlsh pvc concealed conduit isi marked with all accessories on walls and making good the disturbed surfaces including all conduits fittings, clamps guittes etc for earth dbs and boxes with proper thimbles all as directed by engr-in-charge. note :02 run of 2.5 sqmm , 01 run of 2.5 sqmm cable and 01 run of conduit shall be measured as one unit and paid accordingly., all as per item no: 23 here in above but of size 2x 4 sqmm +1x 4 sqmm., m&l cutting chases, pinning in stone concrete block or slab walls & making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring ,etc., and making good, cutting exc. 10 cm girth., supply and fix as in replacement of rigid non-metallic pvc conduit of size 20

State Government

CTN :45729904

07 Jul, 2026 NA

Khaperkheda - Maharashtra

Tender For work of cleaning of lube oil coolers of coal mills, boiler fans and boiler auxiliaries during aoh/ssd in 210 mw units of khaperkheda tps as and when required basis.

Central Government/Public Sector

CTN :45628960

07 Jul, 2026 NA

Nashik - Maharashtra

Tender For corrigendum : tester for pressure checking of liquid cooling system

CTN :45469377

06 Jul, 2026 NA

Sonegaon - Maharashtra

Tender For corrigendum : supply of turnkey solution for liquid nitrogen cooling system

Central Government/Public Sector

CTN :45702711

01 Jul, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of depot ferrous scrap - pl.no.98030309.ferrous scrap consisting of condemned and unserviceable fabricated/loose angles/channels/plates/ sheets/ frames/chequred plates, blower covers/housings, racks,grill gates, trays, fabricated stands and fencings, ms/ gi pipes and tanks of sorts and sizes,fabricated pipe posts , tables, weldmesh frames, control panel frame boxes, control boxes ,battery boxes in full or broken condition,vrla cell trays, hand brake wheels, control board stands, radiator frames/grill,radiator end covers, fabricated packing stand, brackets of transformers ,push rods ,blower leaf , control panels, lube oil filters, loco cutup parts, ms/gi sheets, oil cooler covers, cabin side wall cut pieces, lube oil cooler casings ,window frames,lube oil cooler top covers , sand boxes,after cooler casings , wagon doors,trolley,foot steps, fabricated wheel stands,battery box channels, vertical garden stand, decorative flower pot stand, diesel tank, furnace parts, i beams, tmt bars, fabricated stools, cowls, radiator packing angles,rods,brake beams, bolster stands, ladders, reservoir tanks,chequered plates and other similar items heavy cutup in nature with or without original attachments note: [1] cutting is permitted. [2] purchaser should arrange three pipe gas cutting torch with jointless safety hoses attached with back arrest and advised to follow the all safety aspects as per rule in force. [3] non ferrous items if any should be removed and returned to railways. [4] crane loading is permitted.

Central Government/Public Sector

CTN :45697889

16 Jul, 2026 NA

Ratlam - Madhya Pradesh

Tender For tender for supply of supply, installation , testing and commissioning of 58.5 kva diesel generating sets, three phase, 415v with amf control panel type of engine cooling :liquid cooled, rated rpm of engine(rpm): 1500, type of alternator : brushless, class of insulation: h,battery capacity(ah) : 120 , no of batteries: 1 or more,cpcb-iv+ emission norms,insulation classclass-h,starting system-electric start,standardscpwd specifications, wr approve make list attached. supply and commissioning of battery operated platform truck, load capacity-4000 kg. make/model :-josts / godrej / voltas / jaldoot or equivalent. hand operated pneumatic barrel pump, dual directional pump of inlet 01 inch, deliver 05 liters in 20 turn, wetted components steel, cast iron, nbr, complete with 01 nos 2meter long flexible delivery pipe. suitable to barrel capacity 210/220 liter brand: prachand, lubi, toss, kingom, lavaka, skope, (detailed description/specification as per product # 1 of gem contract no. gemc-511687710211457 dt.19/04/2026 , two wheeler tyre with tube (bullet motorcycle) size 110/90-18 m/c 61p and 90/90-19 m/c 52p brands like mrf, ceat or similar. tyre with tube for mp-43-g-1645 vehicle model no. 215/75 r15 make/brand : ceat, jk, mrf or as similar. tyre with tube for bullet motorcycle size-(90/90-19 m/c 52p), make-mrf. steel radial tyre with tube for departmental vehicle make- mrf/apollo/ceat only with warranty as per manufacturer and enclosed annexure-l - 1. ashok leyland dost tyre size 185 r14 (185mm section width for a 14-inch rim). steel radial, ply rating-10pr, for 02 vehicles with stepney. 2. mahindra maxx, tyre size7.00 r 15 (7.00 inch section width, 15-inch rim diameter). steel radial, ply rating-12pr, for 01 vehicle with stepney. 3. eicher truck, tyre size 8.25-20 (20-inch rim diameter) steel radial, ply rating-16pr, for 01 vehicle with stepney.

State Government

CTN :45513372

03 Jul, 2026 5.48 Lacs

Jharsuguda - Odisha

Tender For corrigendum : lube oil cooler-raph-15 lpm , tube bundle assy for raph cooler

CTN :45667518

14 Jul, 2026 NA

Izatnagar - Uttar Pradesh

Tender For supply of lube oil cooler assembly dlw pt no 17050534 emd pt no 9560308 [ warranty period: 30 months after the date of delivery ] ]

corporations/Associations/Others

CTN :45345600

01 Jul, 2026 14.56 Lacs

Sonbhadra - Uttar Pradesh

Tender For corrigendum : supply of oh of main steam line valve v2 6 , oh of steam by pass valve v2 27,15, and v2 7 , oh of es 3,4,5,6 and 7 , oh of v2 -82-84 and v2-81-a to 81c , oh of hd-21, hd-29, hd-30 and hd-31 , oh of nrv of h.p. heater and feed pump , oh of group protection valve of hph , oh of dw-4, 37,38,39,40,41 and ca 5 , oh of cst makeup valve v6 60 , oh of as-48 valve , oh of nrv of extraction line es-8 , oh of suction valve of bfp , oh condensate wtr throw off valve to condenser , oh throw off valve to cond and steam isolating of lph2 , oh of steam isolating valve of lph 3, 4 , oh of safety valve of aux prds or deaerator , oh of safety valve of h.p. heater , oh of safety valve of l.p. heater. , oh of safety valve of cbd tank. , oh of safety valve of flange or stud heatng , oh of safety valve of warm up line. , overhauling of actutator of as 48 valve , oh of actr feed line valvev2 81 or v2 82 or v2 83 or v2 84 , oh of actr of v2 7 or v2 15 or v2 27 , oh of actr drip line valve and ext line valve , oh of actr valve connected to condenser , oh of actr cst make valve , oh of actr of msv l and r , oh of actr of steam isolating valve to lph2 to 4 , oh of actr steam throw off valve to condenser , cut or weld or repl of hp valve 15 to 50mm , cut or weld or repl of hp valve 51 to 100mm , cut or weld or repl of h p valve 101 to 150mm , oh of butterfly valve of condenser , oh of dea and fst with internal painting , repair or replacement of broken hanger , tightening of loose hangers , cut or weld or repl of l.p. valve 15 to 50mm , cut or weld or repl of l.p. valve 51 to 100mm , cut or weld or joint of h.p. pipe 15 to 50mm , cut or weld or joint of h.p. pipe 51 to 100mm , cut or weld or joint of h.p. pipe 101 to 150mm , cut or weld or joint of h.p. pipe 151 to 300mm , lift or straight aprds hdr by cutting weldding , o h of lph 1a , 1b , o h of lph 2 3 and 4 , oh and attend flange leakage of gc i or ii , clean of turbine oil or h2 gas cooler str , repl of damaged sp. valve v2 38 , repl of damaged special valve v2 27 , oh of turbine oil coolers , oh of main ejectors of turbine , oh of h.p. heater , oh of lcv 3to15pcv-5, 14,16,17,tcv 8 , repl bend of lp drip connected to drip pump or condenser , cut damaged bend of hph drip cont to dea , cut weld or repl of h.p. valve 151 to 300mm , blank of crh line for ht and normalizing , oh of h.p. valve nrv in h.p. line , oh of l.p. valve nrv , oh of energy absorber of bfp , oh of dss of aux. prds. , 2coat paint bcw,clr,bfp,cep,drip pump and line , 2coat paint cst,bcw pump ,swc tank,line,valve , 2coat paint hcplg,sw,bcw,cw exc clr line , 2coat paint air washer sys,cep or phos orhyd , 2coat spray paint syn super enamel lpc , 2coat spray paint front ped,barring gear , 2coat spray paint brg and housing turbine , 2coat spray paint cntl valve casing , 2coat spray paint condenser and line , 2coat spray paint main oil tank , 2coat spray paint main ejector , 2coat spray paint centrifuging machine , 2coat spray paint lube oil cooler , letter writing 2 inch size dia

Lube Oil Cooler Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors