Latest lube oil Tenders | Government lube oil Tenders

Central Government/Public Sector

CTN :45727845

16 Jul, 2026 NA

Kalka - Haryana

Tender For supply of pre filter for engine lube oil c and d no. m 623/040, m 623/045 and m004/107 drg. no.1de/10-046 ref a, b and c alt nil. ]

Central Government / Public Sector

CTN :45470048

07 Jul, 2026 NA

Haldia - West Bengal

Tender For corrigendum : supply of 9040m26d78/lube oil pump complete p/n: dr2win52315f

Central Government/Public Sector

CTN :45733179

07 Jul, 2026 NA

Multi City - Karnataka

Tender For auction sale of depot ferrous scrap - ubl/gsd/c-0031/air filter /26/c [pl no.98412164] condemned and un- serviceable air filter scrap consisting of air filters, lhb fresh air filters, return air filters, inner air flitters and outer air filters vehicle air filter, forklift fuel/lube oil filters, demu bypass oil/lube oil filters ,compressor air/oil filters, dynacell filter, filter parts, air filter of 1400hp demu dpc cummins, outer /inner air filters, catepiller outer/inner air filters and other similar scrap, in different condition with or without ms/ss/aluminum/cloth/paper attachments . available under the custody of cdms/rs ward/gsd/ubl. note: purchaser has to physically inspect the lot before bidding.location: road no -02 gsd/ubl bin no-block: c-031. remarks-. delivery should start from one end. no pick and choose allowed.

Central Government/Public Sector

CTN :45731598

13 Jul, 2026 NA

Chennai - Tamil Nadu

Tender For supply of set of lube oil pressure gauge and sensor consisting of 2 items. 1. lube oil pressure gauge to cummins part no.4071832 - 02 nos . 2. sensor to cummins part no. 4071835 - 01 no. [ warranty period: 12 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45736387

09 Jul, 2026 NA

Chennai - Tamil Nadu

Tender For supply of b-check kit for 500kva diesel generator set kirloskar oil engines ltd 1) air cleaner primary element (part no. f6.404.27.0.00) - 02 nos, 2) air cleaner safety element (part no. f6.404.28.0.00) - 02nos, 3) lube oil filter (part no.dv0.014.11.0.00) - 01no, 4) lube oil filter (part no.dv0.014.27.0.00) -01no, 5) fuel filter cartridge (part no.dv0.020.03.0.00) - 02nos, 6) spin on assembly kit (part no. dv8.040.24.0.00) - 01no. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45736590

13 Jul, 2026 NA

Multi City - Multi State

Tender For supply of b-check kit for 160kva diesel generator set kirloskar oil engines ltd 1) kirloskar care premium genuine lube oil 20 litres can (part no. 82.060.10.0.20) -1nos, 2) spin on lube oil filter (part no. 06.436.01.0.00)-01nos, 3) bypass filter (part no.6h.1193.02.0.00) -01nos, 4) primary element (part no. 3h.132.01.0.00) -01nos, 5)secondary element (part no. 3h.132.02.0.00) -01nos, 6)primary element (part no. 6h.413.02.0.00) -01nos 7) poly v belt (part no. 4h.1493.01.0.00) -01nos,8) poly v belt (part no. 6h.1171.01.0.00) -01nos , 9)freight charges (part no. fre.chr.01.0.00) - 1 no. ]

State Government

CTN :44883821

14 Jul, 2026 NA

Gandhinagar - Gujarat

Tender For corrigendum : supply of tubes and work of insitu retubing as per atc d d - aluminium brass seamless cold drawn tubes , end plate having size of o.d. 267mm, thickness 16.5mm, 190nos. of holes and material s.s. 304 for lube oil cooler of bfp unitunit no. 3 and 4 gtps. , end plate having size of o.d. 205mm, thickness 32mm, 190nos. of holes and material s.s. 304 for lube oil cooler of bfp unitunit no. 3 and 4 gtps. , end plate having size of o.d. 330mm, thickness 25mm, 320nos. of holes and material s.s. 304 for working oil cooler of bfp unitunit no. 3 and 4 gtps. , end plate having size of o.d. 260mm, thickness 40mm, 320nos. of holes and material s.s. 304 for working oil cooler of bfp unitunit no. 3 and 4 gtps. , baffles having size of o.d. 205mm, thickness 04mm both end chamfer and material s.s. 304 for lube oil cooler of bfp unitunit no. 3 and 4 gtps. , 01set equals to 25nos. , baffles having size of o.d. 260mm, thickness 04mm both end chamfer and material s.s. 304 for working oil cooler of bfp unitunit no. 3 and 4 gtps. , 01set equals to 19nos. , work of complete in situ re tubing of old damaged tube cooler of lube oil cooler of 210mw unit no. 3 and 4 as per atc , work of complete in situ re tubing of old damaged tube cooler of working oil cooler of 210mw unit no. 3 and 4 as per atc ) /bid number : gem/2026/b/7336822 * /dated: 14-04-2026 & & / bid document 1 / 12

Central Government/Public Sector

CTN :45713868

11 Jul, 2026 30.00 Lacs

Delhi - Delhi

Tender For periodical services and other connected items at af stn 3 wing under aor of ge (af) faridabad - demolition/dismantling of brickwork or stone/ boulder masonry, built in cement mortar incl all quoins, arches, pillars, etc, complete all as specified and directed ., m&l for brickwork with subclass b bricks (old size bricks), straight or curved on plan exc 6m mean radius, built in cm 1:6 complete all as specified and directed ., all as per item no 02 above but except bricks., m&l for brick work with sub class b bricks (old size brick) straight or curved on plan to any radius in half bricks thick walls, built in cm 1:4 complete all as directed., taking down cement plaster of any description on concrete surfaces such as soffit of rcc slab, chajjas and brick walls, ceiling etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed, m&l for rendering 15 mm thick cement plaster in cm 1:6 on brick work or concrete surfaces including finished even and smooth without using extra cement complete all as specified and directed ., m&l for rendering 15mm thick in cm 1:4 on of brick work or concrete surface finish ever and smooth (w/o using extra cement) incl wpc as per user manual complete all as specified and directed., m&l for rendering 10mm thick in cm 1:3 over concrete surface as on ceiling, chhajja, shelves etc to match with existing surfaces finish even and smooth w/o using extra cement complete all as specified and directed. ., m & l for preparation of new plastered surface and applying two coats of oil emulsion distemper on wall over one coat of primer incl one layer of 3mm thick wall care putty on old scraped surfaces or new plasterd surfaces and obtain smooth finish using sand paper complete all as specified and directed ., m & l for preparation of new plastered surface and applying two coats of oil emulsion distemper on ceiling over one coat of primer incl one layer of 3mm thick wall care putty on old scraped surfaces or new plasterd surfaces and obtain smooth finish using sand paper complete all as specified and directed ., m&l for rough cast (grit) finish plaster with a mixture consisting of crushed stone or fine gravel aggregate mixed with coarse sand and cement in the ratio of 1:1:1 over & including 12mm thick rendering in cement mortar 1:3 on fair faces of brick masonry or concrete surfaces of walls complete all as specified and directed ., m&l for preparation of newly plastered surfaces of wall and applying three coats of white wash complete all as specified and directed ., m&l preparation of newly plastered or unplastered surfaces of wall and applying two coat of distemper oil emulsion white/tinted over a coat of appropirate primer over including a layer 2 mm acrylic wall putty to achieve desired smoothness and eveness complete by hand roller complete all as specified and directed ., m&l for preparation of newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed ., m&l for preparation of newly plastered surface of walls & material & labour for applying two or more coats of 100% premium acrylic emulsion paint having voc less than 50 gm/litre and uv resistance as per is 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed ., m&l for complete removal of old decorated, plastered or pointed surfaces of ceiling by brooming down or steel wire brushing,scrapping down smoke soot moulds, moss and efflorescent, salts and treating oil & greasy spots, filling cracks with wall care putty etc and applying two coat of white wash complete all as specified and directed ., m&l for complete removal of old decorated, plast

Central Government/Public Sector

CTN :45713884

11 Jul, 2026 40.00 Lacs

Delhi - Delhi

Tender For periodical services and other connected items at af stn basant nagar under aor of ge (af) faridabad - demolition/dismantling of brickwork or stone/ boulder masonry, built in cement mortar incl all quoins, arches, pillars, etc, complete all as specified and directed., m&l for brickwork with subclass b bricks (old size bricks), straight or curved on plan exc 6m mean radius, built in cm 1:6 complete all as specified and directed., all as per item no. 02 above but except bricks., m&l for brick work with sub class b bricks (old size brick) straight or curved on plan to any radius in half bricks thick walls, built in cm 1:4 complete all as specified and directed., taking down cement plaster of any description on concrete surfaces such as soffit of rcc slab, chajjas and brick walls, ceiling etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed, m&l for rendering 15 mm thick cement plaster in cm 1:6 on brick work or concrete surfaces including finished even and smooth without using extra cement all as specified and directed., m&l for rendering 15mm thick in cm 1:4 on of brick work or concrete surface finish ever and smooth (w/o using extra cement) incl wpc as per user manual complete all as specified and directed., m&l for rendering 10mm thick in cm 1:3 over concrete surface as on ceiling, chhajja, shelves etc to match with existing surfaces finish even and smooth w/o using extra cement complete all as specified and directed. ., m&l for preparation of new plastered surface and applying two coats of oil emulsion distemper on wall over one coat of primer incl one layer of 3mm thick wall care putty on old scraped surfaces or new plasterd surfaces and obtain smooth finish using sand paper complete all as specified and directed., m & l for preparation of new plastered surface and applying two coats of oil emulsion distemper on ceiling over one coat of primer incl one layer of 3mm thick wall care putty on old scraped surfaces or new plasterd surfaces and obtain smooth finish using sand paper complete all as specified and directed., m&l for rough cast finish plaster(grit wash) with a mixture consisting of crushed stone or fine gravel aggregate mixed with coarse sand and cement in the ratio of 1:1:1 over & including 12mm thick rendering in cement mortar 1:3 on fair faces of brick masonry or concrete surfaces of walls complete all as specified and directed., m&l for preparation of newly plastered surfaces of wall and applying three coats of white wash complete all as specified and directed., m&l preparation of newly plastered or unplastered surfaces of wall and applying two coat of distemper oil emulsion white/tinted over a coat of appropirate primer over including a layer 2 mm acrylic wall putty to achieve desired smoothness and eveness complete by hand roller complete all as specified and directed., m&l for preparation of newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed., m&l for preparation of newly plastered surface of walls & material & labour for applying two or more coats of 100% premium acrylic emulsion paint having voc less than 50 gm/litre and uv resistance as per is 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed., m&l for complete removal of old decorated, plastered or pointed surfaces of ceiling by brooming down or steel wire brushing,scrapping down smoke soot moulds, moss and efflorescent, salts and treating oil & greasy spots, filling cracks with wall care putty etc and applying two coat of white wash complete all as specified and directed., m&l for complete removal of old decorated, pl

Central Government/Public Sector

CTN :45420505

07 Jul, 2026 NA

Medak-T - Telangana

Tender For corrigendum : tender for supply of 250 lpm lube oil system hp1103 dvc proj - 250 lpm lube oil system , 11 kw motor , thermowell d8 , thermowell d12 , pre transm , diff pres tran , l joy coup , trip scr pump , du bas fil , toil cooler , pres relief v , pres relief v , mic fil ele , nrv , du rtd , s type tem , dpt , lev tran

Lube Oil Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors