Latest lubricating tube Tenders | Government lubricating tube Tenders

Central Government/Public Sector

CTN :45731903

14 Jul, 2026 NA

Kapurthala - Punjab

Tender For supply of modified coach water inlet (connector) with strainer., as per drawing: camtech.m.coach watering-08-s with mdts-203 revision 06, packing instruction: pi042 ver1.0, as per standard packing. it should be ensured that item should not rub duringtransportation. the item should be packed with adequate strength. transit damage , if any , shall be at the cost of supplier. [ warranty period: 30 months after the date of delivery ] ]

State Government

CTN :45732782

02 Jul, 2026 NA

Rohtak - Haryana

Tender For rohtak town annual maintenance works for storm water - s/v spindle check nut / providing & fixing new check nut and spindle fo 12" sluice valve, inside inlet drain behind 50 hp pump chamber at at main disposal rohtak town complete in all respect.

State Government

CTN :45734801

10 Jul, 2026 1.76 Crore

Rohtak - Haryana

Tender For construction of boosting station in bhutia pana near old chopal, raw water inlet channel and strengthening of existing s and s tank no.2, providing and laying distribution system

Central Government/Public Sector

CTN :45731104

13 Jul, 2026 NA

Patratu - Jharkhand

Tender For supply of hose assly. water inlet vent dlw part no. 17051113 emd part no.9579999 [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45713851

25 Jul, 2026 55.00 Lacs

Dappar - Punjab

Tender For repair/maint of air cooled ac plants, chiller, condenser pump, hot water boiler, ahu, water colled ac plants, motor, hwg and ahu alongwith connected items at akash complex/tech area at dappar under age(i) dappar - material and labour for servicing / cleaning of air cooled ac plants of 50 tr capacity, chiller unit, cleaning and washing of cooling coil with fins using a chemical c-shine (alkaline coil cleaner and brightener) and testing the unit (once in a three months) complete all as specified and as directed by engineer-in-charge. location :- akash air cooled ac plants(once in a three months), material and labour for descaling of complete condenser units for central/ package type ac plants of condenser unit of water cooled ac plantac plant upt to 40 tr capacities by means of adding descaling chemical solution (hcl) or equivalent into the cooling tower sump as per requirements, and running the plant pump continuously till all the scale of pipes/shell are removed including removing side covers of condenser and cleaning the water tubes by means of nylon brushes till the scaling is removed and refixing of covers including replacement of neoprene rubber gasket and refixing pipe connection etc. to entire satisfaction of engineer-in-charge complete all as specified and as directed by engineer-in-charge. location :- old, 3ac igloo ac plant and new ac plant (once in a three months), material and labour for cleaning of cooling tower existing size, water basin and makeup tank with the help of chemical and nylon brush, removing and refixing of pvc finches after washing, cleaning of condenser pipe line ( inlet and outlet) including painting of out side of cooling tower with inlet and outlet pipe line with one coat synthetic enamel paint of colour approved by engineer in charge and inside painting of water tank of cooling tower using water proof black japan paint one coat including changing of unserviceable pvc guard, water distibutor, pvc pipe, and all connected minor items of up to 100 tr capacity of the ac plants at different locations complete all as specified and as directed. location :- old and new ac plant, material and labour for servicing of cooling coils and air filters of ahus intalled at air conditioning plant by removing air filters and fixing after cleaning with air blower and water and cleaning agent , cleaning of cooling coilwith wire brush and air blower and water spray pump after spraying scale gun or equivalant chemical suitable for aluminium fins and straighting the fins of cooling coil by using suitable brush for any capacity of ahu complete all as specified and as directed by engineer-in-charge. locaton :- new ac plant, old ac plant , 3 ac igloo ac and akash ac plants akash, material and labour for servicing / cleaning and testing of electrically operated pan type humidifier capacity 9 kw alongwith all necessary items fitting and all suitable / all necessary electrical wiring from electrical panle to humidifier complete all as specified and as directed by engineer-in-charge. location :- akash ac plants, material and labour for servicing / cleaning and testing of pressurization unit in cold water line ( psu-225 as per site) alongwith all necessary items fitting and all suitable / all necessary electrical wiring complete all as specified and as directed by engineer-in-charge. location :- akash ac plants, material and labour for servicing / cleaning and testing of pressurization unit in hot water line ( psu-225 as per site) alongwith all necessary items fitting and all suitable / all necessary electrical wiring complete all as specified and as directed by engineer-in-charge. location :- akash ac plants, material and labour for servicing , cleaning , and greasing , chiller , hwg pumps , ahu and ct motors alongwith all necessary minor items/ fitting i.e bearing , star coupling , screws , nuts and bolts etc complete all as specified and as directed by engineer-in-charge. location :- new ac plant , old ac plant and air coole

Central Government/Public Sector

CTN :45739444

21 Jul, 2026 NA

Katipala - Karnataka

Tender For 1300076574 hydrant standpost with landing valves , 1000050305 hvlr water/foam monitor of 1000/500 , 1300076575 revolving nozzle with flanged inlet

CTN :45139282

18 Jul, 2026 NA

Mumbai - Maharashtra

Tender For corrigendum : tender for supply of gasket , o ring , gasket , starting valve , wrench , bearing shell connecting rod , piston 2 parts assembly , liner pa4 200 , valve guide , cylinder head , injector equipped assembly , spiral wound gasket , gasket , tool cylinder head hydraulic test , tooling erection tacking to pieces , tool for valve seat , ass low malf bearing , tool for half jaw , combustion chamber cock , tool demper , inlet push rod , tool for honing liner , filter element , 80 100 ht water pump ccw , 80 100 ht water pump ccw , rack sensor fr xxbnn151349 , speed sensor fr xxbnn151349 , valve seat insert , tool for fitting , engine controller fr xxbnn151349

CTN :44669392

02 Jul, 2026 9.97 Lacs

Patiala - Punjab

Tender For corrigendum : providing fresh water in holy sarovar of kali mata mandir and making provision of regulation of water including inlet and outflow of the water from the holy sarovar

CTN :45624154

08 Jul, 2026 NA

Multi City - Andhra Pradesh

Tender For corrigendum : procurement of spares for 6kl and 10 kl transformer oil filtration machines- coarse filter pp coarse filter pp, cotton yarn on ss core.61 mm diax20 inch long (5 micron), 01 set equals to 18 nos. (for 10kl transformer oil filtration machine of nach make), fine filter pp cotton yarn on ss core.61 mm diax20 inch long (1 micron), 01 set equals to 18 nos. (for 10kl transformer oil filtration machine of nach make), coarse filter resin bonded cellulose/ 1 micron, catridge type, active length:500mm. (for 6kl transformer oil filtration machine)., fine filter max.filtration of particle size:0.5 micron, catridge type, active length:500mm. (for 6kl transformer oil filtration machine)., heater element type: indirect, 2.77 kw, 1ph,230 v ac, temperature range:30-110 deg.cen, (for 6 kl transformer oil filtration machine)., heater element type: indirect, 4 kw,1ph,230v ac temperature range:30-110 deg.cen, (for 10 kl transformer oil filtration machine)., vacuum pump oil, for 10000 lph transformer oil filtration machine, roots pump oil, dial type thermometer 0-150 deg c, oil inlet motor with pump pump make: del pd pumps and gears(p) ltd pump type: positive displacement with gear pump. model: hgn-150 size: 1 half inch bsp, 1440 rpm min capacity: 110 lpm max. pressure: 10kg/cm motor make and type: siemens, 3 ph., induction type rating: 415v, 5.1a, 3 hp (2.2 kw), 1430 rpm type of starter: dol min. suction head at rated output(meters): 3-5 mtrs frame: 100l, oil outlet motor with pump(6kl) flow well canned motor pump set pump make: cee dee/flowwell pump type: glandless centrifugal. capacity: 6000 lpm motor make and type: monoblock rating: 415v, 50 hz, 3 hp output: 2.2 kw type of starter: dol min. suction head at rated output(meters): 15 mtrs flow: 100 lpm type: cmp: 0.18.6, water pump capacity: 18lpm type: centrifugal make: cri/kirloskar/reputed, smps(6kl) i/p: 230 vac o/p: 24 vdc, 5a make: nhp, mx-o contactor(6kl) i/p: 240 vac, 2no+2nc type: 22e suitable for 55 deg.cen make: landt, oil inlet motor with pump(10kl) inlet gear pump: del pd pumps and gears (p) ltd model: hgn-250 size: 2 half inch bsp, 1440 rpm min. capacity: 350 lpm max. pressure: 10kg/cm motor make: crompton greaves limited rating: 5 hp, 415 vac, 50 hz, 1430 rpm, frame: nd112m, oil outlet motor with pump(10kl) make: nxl flow instruments rating: 3 ph. 415vac, 2850 rpm, 7.5/10 hp, 10000 lph, glandless pump: nxl model: 31100 s head: 15 mtrs discharge: 200 lpm size: 65 x 38 mm, solenoid valve: rating: 24v dc, 50nb, threaded end 0.00 to 4.00 bar 80 deg.cen model: 9230d504/cf8/s6/bn/bsp m50-rd/gp/h make: avcon, solenoid valve: rating: 230 vac / 8 w, 1 by 4 th inch nb, threaded type make: kushako, solenoid valve: rating: 230 vac,50 hz, 40nb operating pressure: 0 kg/cm 2 5 kg/cm 2 model: uw-40-1 bsp make: avcon/pro-unid, solenoid valve: rating: 230 vac,50 hz, 45nb operating pressure: 0.00 to 2.00 bar model: 9220a6015/br/s4/bn/bsp m45-1-rd/gp/h make: avcon/pro-unid, solenoid valve: rating: 230vac, 50hz model: m50 h make: avcon, solenoid valve: rating: 24vdc, 40 nb make: avcon

CTN :45730835

30 Jul, 2026 NA

Kanchrapara - West Bengal

Tender For supply of u clamp 25 mm. bore with two nos. s.s. plane washer and two no. s.s. nut size 06 mm., (material used for modification coach water inlet with under slung water tank as per drg. no. t-6-3-767). [ warranty period: 30 months after the date of delivery ] ]

Lubricating Tube Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

State Government

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector