Latest lubricating oil machinery Tenders | Government lubricating oil machinery Tenders

Central Government/Public Sector

CTN :45713879

20 Jul, 2026 NA

Jorhat - Assam

Tender For repairs to compound wall, fencing and gate with connected items in domestic area and omq area at afs under ge (af) jorhat - demolition of brick work built in cement mortar of any description complete all as specified and as directed., m&l for brickwork (old size) with sub class b bricks, straight or curved on plan exc. 6m mean radius, built in cement mortar (1:6) complete all as specified and as directed., all as per serial item no. 2 here-in-before but except bricks, using old serviceable brick as retrieved from demolition.note : old serviceable bricks obtained from serial item no. 1 above shall re-used., taking down cement plaster on brick or stone or concrete surfaces of walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and as directed., m&l for rendering 15mm thick on fair face of brick works or concrete surfaces of walls with cm (1:4), finishing the surface even and smooth without using extra cement complete all as specified and as directed., m&l for preparation of new plastered surfaces of walls and applying two coats of cement base paint over and including one coat of alkali resistance primer complete all as specified and as directed., demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed., m&l for plain cement concrete (1:2:4) type b-0 (using 12.50mm graded stone aggregate) used as in benching and coping including necessary formwork complete all as specified and as directed., m&l for brickwork with sub class b bricks, straight or curved on plan to any radius in half brick thick walls, built in cm (1:4) complete all as specified and as directed., m&l for dismantling posts or struts (wood, steel or rcc) any section, including taking out embedded portion and making good to disturbed ground surfaces complete all as specified and as directed., m&l for plain cement concrete (1:3:6) type c-2 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete, etc. complete all as specified and directed., s&f hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing, etc. wind ties for roof including securing bolts posts and struts in fencing of size 65x65x6mm including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc. and similar work conforming to fe-290 gde e-165 complete all as specified and as directed., dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed., s&f 11mm to 15mm dia of shank mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and onehexagonal or square nut, but length of bolt exc. 5cm but n. exc. 10cm complete all as specified and as directed., excavating in post holes (or similar holes) each n. exc. 0.5cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering and removing surplus soil to a distance not exc. 50m and making good surface as in soft/loose soil complete all as specified and as directed., m&l for preparation of new steel and iron surfaces of any description over 10cm width or girth not otherwise described for and applying two coats of synthetic enamel paint over and including one coat of red oxide primer complete all as specified and as directed., m&l for mild steel tmt bar 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends binding wit

CTN :45679372

02 Jul, 2026 20.16 Lacs

Delhi - Delhi

Tender For supply and replacement of defective parts of kirloskar make transformers of 1000/750/500 kva capacity at ugc & cag building, new delhi. - supply and fixing of over current earth fourth relay 24 dc l&t make etc complete as reqd. , supply and fixing of 11 kv indoor single phase resin cast current transformer 300/5amp etc complete as reqd., , supply and fixing of transformer 500 kva 11/0.433 kv wt1 scanner & rtd sencer lead., , supply & installation of suitable rating of 500 kva 11/0.433 kv lv bussing porcelain or epoxy-cast resin comply with is-1180 complete as required, , supply and fixing of suitable rating of 500 kva 11/0.433 kv lv flexible porcelain or epoxy-cast resin comply with is-1180 complete as required., , dismantling /loading and unloading of 500kva, 11kv/433volt, 3phase, 50hz, cast resin dry type kirloskar make indoor transformer hv/lv coil/core etc and repair of crack in hv/lv winding/core and putting cast resin/resin hardener, reassembling all the dismantle parts accessories confirming to is 11171 and iec 60076 etc including all tests i.e voltage ratio, magnetic balancing, vector group, ir magnetizing current, winding resistance etc complete as reqd., , supply & installation of 630a vcb vacuum interrupter etc complete as reqd., , sh-2 (old cag bldg), , supply and replacement of 750- 1000 kva transformer oil gas kit etc complete as reqd., , checking in 750-1000 kva transformer all type of protection etc complete as reqd., , supply and replacement of lv bushing oil seal in 750-1000 transformer etc complete as reqd. no.ryb) (4, , supply and replacement of hv bushing oil seal in 750-1000 transformer etc complete as reqd. (3 no. r,y, b), , supply and replacement of off load tape changer in 750-1000 kva transformer etc complete as reqd., , replacement of transformer oil in oltc top-up of main tank etc complete as reqd., transformer oil filtration and dehydration of 750 kva & 1000 kva transformer using high-vacuum oil filtration plant, including removal of moisture, dissolved gases, sludge and impurities from transformer oil, circulation of oil through filtration machine, achieving required bdv value, testing before and after filtration, manpower, tools & tackles, consumables, complete as required at site., , complete servicing, overhauling, cleaning, contact checking, lubrication, insulation resistance testing, contact resistance testing, functional testing and commissioning of oil circuit breaker (ocb), complete as required at site., , supply & installation of male contact, , supply & installation of female contact, , supply & installation of over current earth fault relay, , supply & installation of 24 volt dc power pack unit etc complete as reqd., , supply and fixing of transformer wti relay etc complete as reqd.., , supply and replacement of transformer oti relay etc complete as reqd.., , providing and fixing following rating and breaking capacity and pole mccb with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, ics=100% icu and operational voltage 690v etc. as required., , (make: schneider electric-nsx /siemens / lk/ abb/hager)

State Government

CTN :45647309

30 Jun, 2026 1.66 Lacs

Panchkula - Haryana

Tender For -providing and fixing of mccb, ms pipe, etc. and spare parts at water works in i/a ph-i, panchkula. (a/mtc. of p.h services in sector-1 to 21 and i/a ph-i and ii, panchkula) - 24.5.1.6:- supply and jointing three core submersible flat cables of approved make with bare bunched copper conductor insulated and sheathed with pvc for submersible pump motors /fountain lights etc with voltage grade 1100 volts marked with is:694, 1990 including cost of jointing, materials as well as carriage, loading, unloading etc. complete in all respect up to the entire satisfaction of engineer- in-charge. submersible copper cable 3 core 16 sqmm., 23.22.1.5;- mccb ,distribution boards, mcb`s, rccb`s, change over etc. 1.5. supply and erection of modular case circuit breaker single pole/4 pole on existing wall/pedestal/panel including bounding to earth and making necessary connections required to complete the job in all respect up to the entire satisfaction of the engineer- in-charge of the work. triple pole mccb 200 to 250 amp, 25 ka [through rate], 23.22.8.3:- mccb ,distribution boards, mcb`s, rccb`s, change over etc. 8.3. sitc four pole on load manual change over switch in ss enclosure of following ratings 200 amp 415 volts [through rate], 20.10.3:- extra for fixing sluice valves/flap valves socketed or flanged including cartage from stores or nearest railway station to site of works 3. 150 mm i/d [through rate], pm017. hire and running charges of crane 20 tonne capacity [rate], el270. m.s. pipe 100mm dia, [rate], ns item:-providing and fixing of spare part of sewer cleaning machine including cost of 40 ltr. hydraulic oil for pump, 12 mtr. suction pipe, 4 set millar coupling including handling and fixing charges complete in all respect to the entire satisfaction of eic.

CTN :45551788

06 Jul, 2026 10.06 Lacs

Darjeeling - West Bengal

Tender For supply of puf insulated ppr pipe 32 mm with self regulating heat , puf insulated ppr pipe 20 mm od with self regulating heat tape 35 w mtr and m20 connectors , ppr elbow for pn 20 pipe 3 layer 32 mm and 20 mm size , ppr tee for pn 20 pipe 3 layer 32 mm to 20 mm size , ppr union for pn 20 pipe 3 layer 32 mm and 20 mm size , temperature differential controller for automatic on off operation of heat tape , programmable on below 10 degrees c , pt 100 sensor with 10 mtr signal wire , 3 core 1.5 sqmm copper wire for making connection , black duct tape for protection of nitrile foam to be used on joints with insulation aluminium tape for cladding of nitrile foam joints , puf 40mm thick and 48 kg cum insulated water tank capacity 2000 ltr , ppr pipe jointing machine , supply of 01 nos 3 hp open well submersible pump with dol starter panel. , ppr socket 20mm fta brass 20 to 15 mm , ptmt bib cock 15 mm , tank nipple 32 mm , ppr gate valve 20 mm * /bid number : gem/2026/b/7663417 + /dated: 14-06-2026 ' ' / bid document 1 / 19

CTN :45543246

29 Jun, 2026 NA

Varanasi - Uttar Pradesh

Tender For supply of b22 cap , housing body , mcpcb -metal core printed circuit board , led driver -rectifier circuit , heat sink -tikki- , heat sink compound , diffuser dome , soldering flux , soldering wire , soldering iron 25 watt , heat sink -tikki- making machine , punching machine

corporations/Associations/Others

CTN :45480070

23 Jun, 2026 NA

Mysore - Karnataka

Tender For auction sale of chapathi making machine,dosa making machine,steam line boiler set,peda ball making machine,mysore pak/peda heating machine,old ghee tin empty,old empty barrel,old mixed scrap,old s s material,old plastic pallets,old milk film core,kluber used engine oil,old plastic carboys,old plastic materials,old ghee film

State Government

CTN :45343682

04 Jun, 2026 NA

Karur - Tamil Nadu

Tender For painting works in paper machine road side from cap / cck godown to core making godown at tnpl unit i

corporations/Associations/Others

CTN :45055827

21 May, 2026 18.84 Crore

Multi City - Multi State

Tender For corrigendum : supply, installation, testing and commissioning of office it equipments and internet networking system related works - supply, installation, testing and commissioning of office it equipments and internet networking system related works - supply, installation, testing & commissioning (sitc) of office pc ultra 5 processor pc with ms office and adobe acrobat pro , sitc of monitor: 24 inches fhd monitor, warranty: 3 year standard. includes additional monitors for the laptop users , supply, installation, testing & commissioning (sitc) of 14 inch laptop for office use. ultra 5 processor pc with ms office and adobe acrobat pro including usb dock fro laptops & mac for office users . pro thunderbolt 4 smart dock , sitc of i-mac system 24" with lto 9 drive with thunderbolt connectvity & software +usb dock fro laptops & mac for office users . pro thunderbolt 4 smart dock , sitc of edge server with 16 core intel® xeon® 6 processor 128 gb ram, 4*1.2tb ssd with raid 6 , supply, installation, testing, and commissioning (sitc) high performance unified storage for enterprises ( 500tb raw ) s , sitc of firewall with annual subscription -1 year license & 1 year support , sitc of 50g/25g/10g switch uplink of 100g - core switches , sitc of 10g switch with uplink of 100g for distribution , sitc of 42u smart rack , sitc of 10g base t networking with cat 6a cable and fiber cable , av , lv , sitc of windows server os with cal , sitc of dell tower work station wit 27" monitor, windows11 professional & 3 years support , alteration and repair works (civil + electrical) & technical furniture for car & other tech rooms. , sitc of ups with requd. batteries, racks and electricals . 160 kva 1+1- 3ph , widetek 48 art scanner , sitc of be5-v2-semiautomatic booktek a2 size book scanner with motorized glass movement batch scan wizard software with ocr (included) can perform these functions : scanning and all quality control actions. huge list metadata entry. ocr support : yes. english, and multiple indian languages capability saving in multiple formats. , sitc of imagerunner advance dx c3900 series as per direction of eic. , sitc of steenbeck machines alternative 1: ctm, tr3 16/35mm 600m electric bidirectional table, m10 16/ 35mm 600m manual unidirectional table, m11 16 /35mm 600m manual bi-directional table as per direction of engineer in chage. , sitc of 28 l slimfry, convection microwave oven , sitc of 25litre, digital oven toaster grill . , sitc of 183 litre, single door refrigerator . , sitc of r ga series, hot, cold and normal top load water dispenser with cooling cabinet (for all 3 blocks) , sitc of pic 2.0, v2 2000 watt induction cook top with touch panel (radiant) black , sitc of coffee making machine, the sacco royale otc coffee machine. perfet for small offices and homes , supply of utensil sets , sitc of 8k tv(75 inches (with mounting accessories room-1 , sitc of vc solution for the conference room -2 (8 pax ) , sitc of adobe cc with 5 years subscription , , sitc of di grading blackmagic resolve software , sitc of easy dcp paid version, with 3 years support plan. , sitc of canva pro - 01 nos. with 3 years subscription. , sitc of microsoft office professional license for imac computers , sitc of de-humidifier with air purifier, plasmacluster tech fight against mold, fungus, voc's, absorb moisture, clothe dryer, hepa + carbon + pre-filter, area cover's 550 sq.ft., drain 20l/ day, dw-j20fm-w. , sitc of indoor network ir dome camera , sitc of outdoor network ptz camera , sitc of network video recording (block a, b & c and nitrate vaults) , sitc of network switches (1g) , sitc of patch panels , sitc of scissor lift , sitc of portable air filtration system , sitc of air purifier , sitc of b&w printer , sitc of headphones for editors , sitc of studio speakers pair for di room with mounting accessories , sitc of epabx system with 60 desk phones & 1 ops phone solution with required licenses . , sitc

CTN :44601336

09 Apr, 2026 50.80 Lacs

Chatra - Jharkhand

Tender For day to day cleaning, maintenance and other plumbing items of transit camp d/02, subhasnagar, executive hostel and akashdeep building at dakra for a period of 2 years under a-c area, ccl. - cleaning & washing floor and walls every day, cleaning of commods, basin dusting of table, bed & furniture every day rubbing & polishing of floor every day removal of dry leaves, shrubs & other etc. and other waste from road & cleaning of waste storage tank and other misc job in transit camp, akashdeep building and executive hostel including cooking services in transit camp etc. complete, flushing of deep bore hole by drilling machine complete including supplying all materials, tools, drilling rig. air compressor and equipments as well as fuel lubricants and cost of transportation of rig machine., lifting of submersible pump-motor set from deep bore well with rigid pvc pipe of 50 mm dia including all accessories etc. complete including stacking all materials as per instruction of engineer-in-charge, lowering and commissioning of submersible pump in the deep bore well with rigid pvc pipe, all accessories etc. complete including cost of labour but excluding the cost of materials and fittings (cost of pump, cable, rigid pvc pipe, control panel to be paid separately), supplying 150 mm 3 hp submersible pump sets confirming to is 8034 and motor confirming to is 9783. pump shall be suitable for various delivery head and discharge with stainless steel pump shaft and polypropylene/noryl impeller. motor suitable for working on 415v+10%, 3ph, 50 hz, a.c. supply with cable guard, thrust carbon fiber bearing to withstand entire hydraulic thrust, water proof winding shall be provided. the pump set shall be suitable for direct coupling. pump shall have suitable outlet as per manufacturers design. anti thrust stream lined non return valve shall be provided with pump. 3 meter submersible copper conductor cable in single/double run shall be provided witn each pump submersible pump 150 mm dia (with bronze/ss impeller) upto 25 stages, fully automatic star delta immersed submersible control panel three phases,415 v suitable for 1.5/2/3 hp umps isi marked of approved brand and as per instruction of eic, providing unplasticized polyvinyl chloride (upvc) pipes : (external work) 40 mm dia sch 80 as per astm -d1785 as per direction of eic.(supreme,astral or equivalent, 3 core pvc insulated, pvc sheated copper conductor flat submersible cable with copper conductor, pvc insulated and pvc sheated 3 core 4 sq mm, supplying of plastic rope 12 mm dia., providing and placing on terrace (at all floor levels) polyethylene water storage tank, isi : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank., providing and fixing unplasticized polyvinyl chloride (upvc) pipes, having thermal stability for hot & cold water supply including all upvc plain & brass threaded fittings this includes jointing of pipes & fittings with one step upvc solvent cement, trenching, refilling & testing of joints complete as per direction of engineer in charge. external work 15 mm nominal dia pipes, providing and fixing unplasticized polyvinyl chloride (upvc) pipes, having thermal stability for hot & cold water supply including all upvc plain & brass threaded fittings this includes jointing of pipes & fittings with one step upvc solvent cement, trenching, refilling & testing of joints complete as per direction of engineer in charge. external work 20 mm nominal dia pipes, providing and fixing of unplasticized polyvinyl chloride (upvc) pipes: (external work): 25 mm dia sch 80 as per astm- d1785 as per direction of eic. (supreme, astral or equivalent), providing and fixing p.v.c. low level flushing cistern with manually controlled device (handle lever) conforming to is : 7231, with all fittings and fixtures complete.10 litre capacity -

Lubricating Oil Machinery Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

corporations/Associations/Others

State Government

corporations/Associations/Others