Get complete information related to latest Lubricating Oil Pump Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Lubricating Oil Pump Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Lubricating Oil Pump Tenders.
Tender For supply and delivery of bush and casing wear ring for vertical execution raw water pump of mangal pandey surface water based water supply project in n 24 pgs district under electrical division phe dte
Tender For bazar supply rrs material in technical area at af stn purnea under age i af purnea - excavation over area not exceeding 1.5mtr deep and getting out in soft/loose soil complete all as specified and directed., removing excavated material exc 250 m but n.exc 500 m and depositing where directed complete all as specified and directed., supply only for broken stone boulders of granite /trap or basalt stone of size exc 100 mm but not exc 300 mm including surface dressing of stacking ground & stacked properly,complete all as specified and directed. note:-(i) stack measurement of broken stone/boulders shall be entered in mb before payment., hiring of vibromax power roller of capacity 8 to 12 toone capacity for rolling/compaction of stone boulder,gsb and wet mix macadam as directed by engr-in-charge. note:- (i) per shift of 04 hrs(ii) rate to be quoted by contractor for vehile/plant when working site in technical area.(iii) necessary register shall be maintained having working hours before claiming paymeny duly signed by the engr-in-charge and contractor., hiring of generator 5 kva (trailor mounted) with all electric connection accessories to electric output units installed to any location in technical area as directed by engr-in-charge.note:- (i) per shift of 04 hrs(ii) rate to be quoted by contractor for vehile/plant when working site in technical area.(iii) necessary register shall be maintained having working hours before claiming paymeny duly signed by the engr-in-charge and contractor., hiring of slush pump of capacity 1.5 hp with water discharge 20000 ltrs per hours for dewatering propose from trenches /well etc with provision of hose pipe of suitable bore beyond 100 mtr from exercise location as directed by engr-in-charge.note:- (i) per shift of 04 hrs(ii) rate to be quoted by contractor for vehile/plant when working site in technical area.(iii) necessary register shall be maintained having working hours before claiming paymeny duly signed by the engr-in-charge and contractor.(iv) necessary arrangement shall be made by the contractor within 24 hrs after intimation of engineer-in-charge for conduction of scheme., hiring of tipper 8.5 cum capacity delivered to any location in technical area for shifting of rrs material as directed by engr-in-charge.note:- (i) per shift of 04 hrs(ii) rate to be quoted by contractor for vehile/plant when working site in technical area.(iii) necessary register shall be maintained having working hours before claiming paymeny duly signed by the engr-in-charge and contractor.(iv) necessary arrangement shall be made by the contractor within 24 hrs after intimation of engineer-in-charge for conduction of scheme., hiring of jcb 4 cx deliverd to any location in technical area as directed by engr-in-charge. note:- (i) per shift of 04 hrs(ii) rate to be quoted by contractor for vehicle/plant when working site in technical area.(iii) necessary register shall be maintained having working hours before claiming paymeny duly signed by the engr-in-charge and contractor.(iv) necessary arrangement shall be made by the contractor within 24 hrs after intimation of engineer-in-charge for conduction of scheme., hiring of front end loader (hydraulic wheeled) delivered to any location in tech area for excavation in trenches/loading of rrs material as directed by engr-in-charge.note:- (i) per shift of 04 hrs(ii) rate to be quoted by contractor for vehile/plant when working site in technical area.(iii) necessary register shall be maintained having working hours before claiming paymeny duly signed by the engr-in-charge and contractor.(iv) necessary arrangement shall be made by the contractor within 24 hrs after intimation of engineer-in-charge for conduction of scheme., hiring of water bowzer of 10000 ltrs capacity with filled water in tech area in any locatio as directed by engr-in-charge.note:- (i) per shift of 04 hrs(ii) rate to be quoted by contractor for vehile/plant when working site in technical area.(iii) necessar
Tender For corrigendum : construction of civil works of 2 no fire fighting tanks and sub surface pump house for power house no 1 and power house no 2 and their allied works on epc mode
Tender For invitation of quotation for supply of other cat b stores-, gref), phuentsholing (bhutan), 1, 700 watt powerful section & blower hand vacuum cleaner for vehicles, 2, 60 inch umbrella with cover, wind proof, water proof and uv protection, 3, car body polish kit (12 piece), 4, dashboard polish silicone emulsion 5 ltr pkg, 5, colin glass and surface cleaner liquid spray 500 ml, 6, microfiber cloth for car cleaning cloths 04 pcs 40 x 40 cms 340 gsm multi colour, highly absorbent, lint and streak free all purpose cleaning cloths, 7, double sided tape (pack of 01) 3m x 3 cm, heavy duty transparent ivy grip tape, 8, 5 ltr gl iron conical measure jar for all measuring purpose for petroleum & diesel, 9, 20 ltr metal jerry can (green), 10, godrej aer twist, car air freshener (45 gm), 11, microfiber vehicle washing duster 100 gsm, 12, cotton hand towel 550 gsm size 16 inch x 24 inch hand towel, 13, grease gun bucket 5 kg (high pressure grease pump complete with handle, high pressure hose 2.2 mtr and 4 jaw coupler, 14, brasso metal polish liquid 100 ml, 15, 10 ton capacity hydraulic trolley jack for garage and workshop 560 mm maximum lifting height, 16, car seat cover for land cruiser prado, 17, premium 7d car floor mat full set for maruti ciaz, luxury leather with grass mat complete set 100% waterproof and washable, 18, 7d car mat premium floor mats for mahindra scorpio n, luxury leather double layred car mats set of 04 pcs 100% waterproof and washable, 19, 7d car mat premium floor mats for mahindra scorpio s6 plus, luxury leather double layred car mats set of 04 pcs 100% waterproof and washable, 20, steering cover for land cruiser, 21, steering cover for mahindra scorpio 'n' & s6+ model, 22, seat cover for mahindra scorpio 'n' & s6 plus model, 23, steering cover for mahindra bolero, 24, seat cover for mahindra bolero, 25, steering cover for mahindra bolero camper, 26, seat cover for mahindra bolero camper, 27, wheel cap for mahidra scorpio s6 plus model, 28, seat cover for tata safari dicor, 29, steering cover for tata safari dicor
Tender For corrigendum : supply of spindle head cup , thread roll , thread roll adjuster , bronze gear , hydraulic hose , directional valve , foot switch , flow control valve , gear box oil seal , pressure valve , hydraulic filter , hydraulic pump , front roll bracket , surface , bracket cup , coolant pump , carbide bit with plate
Tender For rate contract of miscellaneous item for financial year 2025-26 at.grampanchayat girola tah. dhanora - material, 9 watt led bulb, 12 watt led bulb, 18 watt led bulb, 20 watt led bulb, 23 watt led bulb, 30 watt led bulb, 50 watt led bulb, 12 watt battery backup bulb, 20 watt led tube light, 20 watt led street light, 24 watt led street light, 30 watt led street light, 36 watt led street light, 40 watt led street light, 45 watt led street light, street light clamp,angle and nut-bolt, 50 watt led flood light, 100 watt led flood light, 150 watt led flood light, 200 watt led flood light, holder heavy 6amp, holder 6amp, 1/18 wire bundle, 2.5 mm service wire bundle, 1 mm multi wire bundle, 1.5 mm multi wire bundle, 2 mm multi wire bundle, 4 mm multi wire bundle, 4 mm service wire bundle, 6 way moduler board, 6amp socket, 16 amp socket, 6amp switch, 16 amp switch, 3 pin top 6amp, 3 pin top 16amp, meter peti, wooden board, 16 amp main switch, 32 amp main switch, 16 amp mcb, 32 amp mcb, power plug, dp switch, celing fan, wall fan, stand fan, casing patti, cooler 4 feet, cooler 6 feet, cooler, insulation tep, 1 hp submercible pump (ac), 3 hp submercible pump (ac), 5 hp submercible pump (ac), 7.5 hp submercible pump (ac), 1 hp mono block pump, dc grundfose motor 2.5-2, helical shift 2.5-2, hydrolic kit 2.5-2, magnetic motor 2.5-2, trust bearing 2.5-2, carbon platet bearing, hydrolic cylender, n.r.v, sensor cable, 1 hp starter, 5 hp starter, 1 hp submercible pump (dc), 3 hp submercible pump+motor +controller (dc), 5 hp submercible pump+motor +controller (dc), 7.5 hp submercible pump+motor +controller (dc), 2.5 mm submercible cable, 100 watt solar panle, 150 watt solar panle, 335 watt solar panle, 545 watt solar panle, 4 mm dc cable, flot (sensor), cotroler (dc), 8 mm rope, 1kva inverter + battery 150ah, 2kva inverter + battery 150ah x 2, 3kva inverter + battery 150ah x 2, 1kva inverter + battery 150ah solar panle home light system, 3kva inverter + battery 150ah solar panle home light system, 5kva inverter + battery 150ah solar panle home light system, 1kva roof top (solar panle +structure), 3kva roof top (solar panle +structure), 5kva roof top (solar panle +structure), solar kandil, 12 watt led solar street light, 15 watt led solar street light, 12 watt led solar street light with pole and accessories complet, 15 watt led solar street light with pole and accessories complet, 7 mtr solar highmast (octagonal pole, 30 watt solar street light - 5, 30 amp lithium battery - 5, 100 watt solar panle - 5), 9 mtr solar highmast (octagonal pole ,50 watt led street light - 4, 30 amp lithium battery - 4, 100 watt solar panle - 4), 9 mtr highmast light (ac) (octagonal pole, 150 watt flood light - 5 etc ..), 12 mtr highmast light (ac) (octagonal pole, 200 watt flood light - 5 etc ..), water filter 12 lph (ro machine ), water filter 15 lph (ro machine ), water filter 20 lph (ro machine ), water filter 25 lph (ro machine ), water filter 50 lph (ro machine ), water filter 500 lph (ro machine ), water filter 1000 lph (ro machine ), seadimate candel 25 lph /50 lph, p.p candel 25 lph/50 lph, carbon candle 25 lph / 50 lph, membran ro 100 gpd, membran ro 150 gpd, ro booster pump 150 gpd, ro s.v, ro booster pump 100 gpd, ro smps, water cooler 20+20, water cooler 20+40, water cooler 80+40, refrizrator 180 lph, 32" led tv (smart android), 43" led tv (smart android), ahuja sound system (amply 120 watt-1, unit-60 watt-2, bhonge -2, mick-2 mick stand -2), ahuja sound system (amply 225 watt-1, unit-60 watt-2, bhonge -2, mick-2 mick stand -2), speaker box, c.c.t.v camera setup (4 cha dvr ), c.c.t.v camera setup (8 cha dvr), all in one sound system, fogging machine, 12vo/100ah battery, 12vo/150ah battery, 850 nxg solar inverter, 12vo/1050 watt inverter, 24vo/2300 watt inverter, solar panle structure, 12 way surface box, 8 way surface box, 6 way surface box, battery water 1 ltr, mobile starter, mini ac & dc home light system (light - 3, led light streep - 1 ), 1.5 ton a
Tender For manufacturing, fabricating fitting-fixing of ms strainer at all the sides of the intake jetty pump house to arrest the foreign materials in the river hooghly of surface water based water supply scheme for bally-jagacha under howrah division, p.h.e.
Tender For providing water supply lines from ash water recovery pump house to ch 3200 m of starter bund of pond- ii with dismantled 300 nb ms pipe line available in block - i area to suppress the raising of ash dust from the deposited surface of ash in pond - ii area
Tender For corrigendum : supply of goods, tools & equipmentforan international standard itotin mechanic motor vehicle (mmv) tradeat iti tarsali, gujarat, india (package 3: mmv trade) - alternator assembly used for lmv working condition demonstration kit , starter motor assembly used for lmv working condition demonstration kit , electronic engine control module , fuel pump for mpfi working condition demonstration kit , inline fuel injection pump and rotor type fuel injection pump , demonstration board of 2wheeler ignition system. , demonstration board of electronic ignition system. , working condition of petrol mpfi engine assembly with fault simulation board , mpfi petrol engine with swiveling stand along with special tools for dismantling and assembling , demonstration board of mpfi system , ultrasonic injection cleaning equipment , working model of power windows , petrol engine motorcycle/scooter along with special tools and accessories , four stroke multi cylinder diesel engine in working condition , four stroke four cylinder crdi diesel engine in working condition , functional/experiment model of different type of sensors. , auto electrical test bench , cut section model of mock layout of a motor car -electrical system - working model , cut section working model of single plate clutch assembly. , cut section working model of diaphragm clutch assembly. , cut section working model of centrifugal clutch assembly. , front axle ( rezeppa joint) with stand for dismantling and assembly , rear axle with stand for dismantling and assembly , cut section model of synchronous gear box working , cut section model of sliding mesh gearbox working , cut section model of constant mesh gearbox working , full floating axle and semi- floating axle assembly , cut section working model of automatic transmission gear box , steering assembly - , 1. rack& pinion, , 2. worm& roller , 3. recirculating ball , 4. power steering , wheel alignment set up instrument-computerized , brake testing equipment (to test efficiency of vehicle where motion after braking is plotted) , motor vehicle in running condition (diesel heavy) with hydraulic power steering , light motor vehicle diesel crdi with electronic power steering and car a/c , engine dynamometer , four stroke multi cylinder engine mpfi petrol with cng kit set up in running condition , four cylinder four stroke diesel engine test rig with rope brake dynamometer , exhaust gas analyzer - diesel , training setup for adas systems , 4-wheel alignment set & hoist with advanced driver assistance systems (adas) complete frame targets , steel toolbox with lock and key (folding type) , punch letter , outside micrometer (0 25) , outside micrometer (25 50) , outside micrometer (50-75) , outside micrometer (75-100) , inside micrometer (25-50) , depth micrometer (0-25) , thread micrometer , adjustable micrometer sprit level to measure flatness, indication and taper with prismatic measuring base , vernier caliper , digital vernier caliper , vernier depth gauge , vernier bevel protractor, least count 5minutes , telescope gauge , dial test indicator plunger type (complete with clamping devices and stand) , universal surface gauge , cylinder bore gauge , compression testing gauge suitable for petrol engine. , vacuum gauge , granite surface plate , work bench , spanners socket with speed handle, t-bar, ratchet and universal , magneto spanner set , cylinder ridge cutter , vice grip pliers , torque wrenches , pneumatic tools set , car jet washer , pipe flaring tool , pipe cutting tool , universal puller for removing pulleys, bearings , stud extractor set of 3 , stud remover with socket handle , paraffin pressure gun , hand reamers adjustable , straight edge gauge , straight edge gauge , ladle , electric soldering iron , wire gauge (metric) , digital multi meter, 3 % digit (min), diode test mode and continuity mode, , growler , hydrometer , battery analyzer with printer , carburetor - solex, mikuni for dismantling a