Latest lubrication valve Tenders | Government lubrication valve Tenders

corporations/Associations/Others

CTN :45723624

02 Jul, 2026 6.00 Lacs

Salem - Tamil Nadu

Tender For supply delivery and fixing of motor and accessories at ward-1 selliyampalayam oht in narasingapuram municipality - supply and delivery of kirloskar make 15hp/11kw/2900rpm three phase/415v/50hz/ac/tefc horizontal centrifugal monoblock pump impeller-mechanical seal (head-20mtr,flow rate-2154lpm) size:100x100mm (local quotation) 15hp horizontal centrifugal monoblock pump, labour charges for erection of horizontal shaft, centrifugal pumpset (coupled/monoblock) in bore well/open well including fixing of suction pipe and foot valve upto a maximum depth of 7 metres and delivery pipes to the required length with valves,pressure gauges upto the exterior wall of pump room and erection of panel board consisting of tpic switches starter, voltmeter, ammeter, capacitor single phasing preventor and laying and jointing the cables and twinearthing as per ie rules including providing bed blocks etc., complete and operating the pumps and trial run for 10 days including signing of completion of reports as required by eb authorities., three phase panel board star- delta with two level guard and auto start supply and delivery of star-delta starter confirming to is 13947, iec60947-1 and as amended thereafter with suitable kw rating for operation in ac/ three phase/50hz (+/- 5%) and 415v (+/- 10%) including 3 pole magnetic contactor with under voltage release - 3 nos., ct operated ammeter (65 mm dia) with suppressed scale,voltmeter (65mm dia),voltmeter selector switch,miniature circuit breaker, thermal overload relay, air break contactors suitable for next standard higher kw rating, single phasing preventor, dry running preventor and on/off push button switches, wiring with 1 sq.mm/4 sq. mm copper pvc insulated cable, powder coated vermin proof box, including the capacitor (the cost of capa citor is to be taken separately). three phase panel board for 15hp, supply,delivery and fixing of the following materials are listed below etc..,as directed by the departmental ofiicers.for service4 core 16sq.mm pvc copper ug cable, for motor3 core 6sq.mm pvc insulated and sheathed flat type copper cable, 150mm di pipe, 100mm gi pipe , 100mm gi flange set, rubber sheet for flange set, ms bolt and nut20mm dia and above x 90mm to120mm length fully threaded bolts andwith nuts 2 nos. , manhole cover 60 x 60cm (heavy duty) with frame, supply, erection, testing and commissioning of cast iron body and bronze internal non-rising spindle sluice valve of sizes at required places to control the flow of water including necessary ms flange of table e , gaskets, bolts & nuts including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the departmental officers. 150mm sluice valve, 100amps 4pole mcb, 100amps porcelain fuse unit (500v), 32mm pipe

Central Government/Public Sector

CTN :45713442

01 Jul, 2026 NA

Visakhapatnam - Andhra Pradesh

Tender For id fd pa fan lub oil systems spares on oem oes basis - level gauge,cilocs4+&005, suction strainer,cilocs+&126,cenlub, throttle valve,cilocs+&208,cenlub, flw sght gls,cilocs+&211,cenlub, flw sight gls,cilocs446157&115,cenlub, level gauge,cilocs446152&005,cenlub, suction strainer,cilocs446152&126,cenlub, throttle valve,cilocs446152&208,cenlub, level gauge,cilocs446155&005,cenlub, flow sight glass,cilocs446155&235,50nb, throttle valve,cil-ocs-446155&208,cenlub, suct str,cil-ocs-446155&126,cenlub, throttle valve,cenlub

Central Government/Public Sector

CTN :45703026

01 Jul, 2026 NA

Visakhapatnam - Andhra Pradesh

Tender For procurement of spares for 110 kw screw compressors - procurement of spares for 110 kw screw compressors installed., air suction filter element 2740728950, 20l pack k-smart premium pt 72700247850, element filter air p/n 9410990500, air oil separator element 2740704350, gasket aos 2740065550, blow down valve assy 110kw screw cmp, kit repair servo cylinder 110kw screw, anti vibration mounting pad,110kw screw

CTN :45197673

14 Jul, 2026 4.01 Crore

Mumbai - Maharashtra

Tender For corrigendum : tender for supply of valve spring suction , hexagon screw , v belt 5ea-1se , spring , o ring for hull gland seal 0000-0 , cylindrical pin , spring washer , clamping sleeve , ring sealing , ring sealing , cylinder screw , spring valve , glow lamp t6 , 8 28v 1 , 2w , screwing , o ring , o ring , o ring , bellow compensator , coller 190x4 , cup seal , sealing bush , stuffing box packing , o ring , amplifier 20db 1798347 , jublee clip , operating unit expansion vv. , strainer , pressure switch , key liminious , filter aclean -k610-46+8 , divers mask t53301 , bridge rectifier , diode 14 1300v , relay base , signalling mirror helograph , signal whistle , first aid kit solars , temp control dw2445 adjus for water o/let of 65dcc , carbon brush , heat exchanger , gasket 13-20x1 , lead m cone 5x34.5 , carbon brush 16x25x32 eg 34dj , power supply a001 , power output stage a006 , regulator power a4004 -p , diode zener protection a007 , transmitter for cft , ps , lower , fixed probe nsn6605997460943(sl1482-83-86-87-93-94) , transmitter for corpers tank (cft)stbd lower , o ring (teflon) no.8 , o ring , washer , washer , zener diode protection a007 , seal shaft , circlip , circlip , washer , transmitter for compen.tank stbd upper , transmitter for compun tank stbd middle , transmitter for compen tank , transmitter for cft , stbd , upper

CTN :45492361

04 Jul, 2026 NA

Srinagar - Jammu And Kashmir

Tender For corrigendum : supply of blue , skin grafting blades for humbys knife blade pkt of 10 blades , skin grafting knife parker modification , chest seal dressing with oneway valve for penetrating wounds , chest seal dressing with vent for penetrating wounds single , bakri postpartum ballon , hemo lock applicator medium , hemo lock applicator large , polypropylene mesh 7point5x15cm , polyster composite mesh with absorbable collagen barner parietex composit , closed wound suction set size 18fg romovac drain , closed wound suction set size 8fg romovac drain , dressing with non adherent pad 10x25cm tegaderm , non absorbable suture sterilised surgical ligature braided coated silk s0 2x , non absorbable suture sterilised surgical ligature braided coated silk s1 2x76 cm , non absorbable suturecomma sterilized surgical ligature braided coated silk , non absorbable suturecomma sterilized surgical ligature braided coated silk s , polypropylene blue monofilament 70100 cm size2oblik0 comma1oblik2 circle rb , suture polyamide monofilament size 1oblik0 comma7090 cm comma3oblik8 cir , synthetic absorbable polyglactin 910oblikpolyglycolic acid coated with polycaprolat , mersilk atraumatic size 1 reverse cutting needle 1oblik2 circle 3040 mm , laproscopic absorable tacker 30 , laproscopic non absorable tacker 30 , laproscopic disposable 5mm port , disposable ranneys clip pack of 20 , neuro patties small , cautery pencil long lead , inj etomidate20 mgoblik10 ml , sterile chlorhexidine sponge with applicator for hipcomma approx 20 ml , mva syringe , disposable mva cannula size 12 , disposable mva cannula size 11 , disposable mva cannula size 10 , disposable mva cannula size 9 , dressing wound care dressing 20 cmx 20cm box of 5 , dressing post op medicated 6x7 cm pack of 100 dressing , polydioxanone size 5oblik0 7075 cm 3oblik8 circle rb double needle 1015 mm , polydioxcrone 7075 cm size1oblik0comma 1oblik2 circlerb 30 mm , blue monofilamant polyglyconate size 6oblik0comma7075 mm 3oblik8 circle doubl , polypropylene mesh 30 cm x 30 cm mesh prosthesis for herniamediumoblikpolyprop , silk braided s1oblik0 reel 6 reelx 25 mtr , silk braided 4oblik 0comma 7076 cm rb 1oblik2 circle needle 2025 mm , steel wire monofilamentcomma 75 cm commasize6 1oblik2 circle heavy needle troca , synthetic absorbable polygalactin 910oblik polyglcolic acid coated with polycarproplat , autoclave label size 2point5x5 cm pack of 500 , vascular tapes red , vascular tapes blue , double j stent with guide wire and pusher 26cm comma 6 fr , sterile water proof mayo trolley cover size 5580 x 135150 cm , double j stent with guide wire andamp pusher 16cm 6fr , oxidised cellulose local haemostats size 1x2 box of 10 , oxidised cellulose local haemostats size 2x4 box of 10 , oxidised cellulose local haemostats size 4x4 box of 10 , cardioplegia needle 14fr , cardioplegia needle 16fr , multi dose withdrawl spike connector with fitted lid and spike to access a multi dose via , spinal needle whitecare 25g , spinal needle whitecare 27g , versa port 12 mm optial trocar with fixation cannula , disposable plain drape sheet size 160cmx200cm , arterial leadercath comma 3 fr 20 g code no 115point090commadia 0point9 mm length , arterial leadercath comma 3 fr 18 g code no 115point11commadia 0point9 mm length 8 , epidural minipack system comma18 g clear catheter and 3 lateral eyes containing touh , epidural minipack system comma16 g clear catheter and 3 lateral eyes containing touhy , needle spinal anaethesia quinke point 23 g x 3point5 inch , needle for spinal anaesthesia with quinke point size 25g , sterofundin //bid details 2 / 74 solution for infusion of balanced crystalloid solution , plasmalyte a 148 ph 7point4 solution for infusioncomma bag of 1000 ml , sodium percarbonate peroxyhydrate disinfectant 45percantage woblikw perfektan cont , synthetic monofilament polydioxanone barbed bidirectional suture needles size 2comma , inj ropivacaine heavy 0point75percantage for spinal anaesthesia , fluid shi

CTN :45624154

08 Jul, 2026 NA

Multi City - Andhra Pradesh

Tender For corrigendum : procurement of spares for 6kl and 10 kl transformer oil filtration machines- coarse filter pp coarse filter pp, cotton yarn on ss core.61 mm diax20 inch long (5 micron), 01 set equals to 18 nos. (for 10kl transformer oil filtration machine of nach make), fine filter pp cotton yarn on ss core.61 mm diax20 inch long (1 micron), 01 set equals to 18 nos. (for 10kl transformer oil filtration machine of nach make), coarse filter resin bonded cellulose/ 1 micron, catridge type, active length:500mm. (for 6kl transformer oil filtration machine)., fine filter max.filtration of particle size:0.5 micron, catridge type, active length:500mm. (for 6kl transformer oil filtration machine)., heater element type: indirect, 2.77 kw, 1ph,230 v ac, temperature range:30-110 deg.cen, (for 6 kl transformer oil filtration machine)., heater element type: indirect, 4 kw,1ph,230v ac temperature range:30-110 deg.cen, (for 10 kl transformer oil filtration machine)., vacuum pump oil, for 10000 lph transformer oil filtration machine, roots pump oil, dial type thermometer 0-150 deg c, oil inlet motor with pump pump make: del pd pumps and gears(p) ltd pump type: positive displacement with gear pump. model: hgn-150 size: 1 half inch bsp, 1440 rpm min capacity: 110 lpm max. pressure: 10kg/cm motor make and type: siemens, 3 ph., induction type rating: 415v, 5.1a, 3 hp (2.2 kw), 1430 rpm type of starter: dol min. suction head at rated output(meters): 3-5 mtrs frame: 100l, oil outlet motor with pump(6kl) flow well canned motor pump set pump make: cee dee/flowwell pump type: glandless centrifugal. capacity: 6000 lpm motor make and type: monoblock rating: 415v, 50 hz, 3 hp output: 2.2 kw type of starter: dol min. suction head at rated output(meters): 15 mtrs flow: 100 lpm type: cmp: 0.18.6, water pump capacity: 18lpm type: centrifugal make: cri/kirloskar/reputed, smps(6kl) i/p: 230 vac o/p: 24 vdc, 5a make: nhp, mx-o contactor(6kl) i/p: 240 vac, 2no+2nc type: 22e suitable for 55 deg.cen make: landt, oil inlet motor with pump(10kl) inlet gear pump: del pd pumps and gears (p) ltd model: hgn-250 size: 2 half inch bsp, 1440 rpm min. capacity: 350 lpm max. pressure: 10kg/cm motor make: crompton greaves limited rating: 5 hp, 415 vac, 50 hz, 1430 rpm, frame: nd112m, oil outlet motor with pump(10kl) make: nxl flow instruments rating: 3 ph. 415vac, 2850 rpm, 7.5/10 hp, 10000 lph, glandless pump: nxl model: 31100 s head: 15 mtrs discharge: 200 lpm size: 65 x 38 mm, solenoid valve: rating: 24v dc, 50nb, threaded end 0.00 to 4.00 bar 80 deg.cen model: 9230d504/cf8/s6/bn/bsp m50-rd/gp/h make: avcon, solenoid valve: rating: 230 vac / 8 w, 1 by 4 th inch nb, threaded type make: kushako, solenoid valve: rating: 230 vac,50 hz, 40nb operating pressure: 0 kg/cm 2 5 kg/cm 2 model: uw-40-1 bsp make: avcon/pro-unid, solenoid valve: rating: 230 vac,50 hz, 45nb operating pressure: 0.00 to 2.00 bar model: 9220a6015/br/s4/bn/bsp m45-1-rd/gp/h make: avcon/pro-unid, solenoid valve: rating: 230vac, 50hz model: m50 h make: avcon, solenoid valve: rating: 24vdc, 40 nb make: avcon

CTN :45642888

03 Jul, 2026 50.47 Lacs

Purnia - Bihar

Tender For corrigendum : supply of , frl 1 or 4 inch with pressure guage , quick exhaust valve 1 or 4 festo or norgen , quick exhaust valve 1 or 8 festo or norgen , spray,wd-40 cap- 400ml btl , cassette ss as per kosan carousel , guide rod for kosan introduction unit , 5 or 2 spring return valve , 1 or 2inch -f, ss ball valve , magnetic sensor , tepar strip for 90 deg bend , lock pin,chain conveyor duplex chain , switch,139a714,carousel kosncris - pressure switch , ejection puller arm , ejection pusher arm , needle valve , pneumatic cylinder 12mm or 16mm with fittings , shaft size- 40mm x 280 mm en-8 , shaft size- 40mm x 4000 mm en-8 , nut bolt 1.5inch x 10mm , nut bolt 1inch x10mm , f-mounting , ejection flexible coupling , pneumatic cylinder- 50 or 160- norgen or smc , toggle joint rod- lt-200 mm , pin of non-pneumatic filling gun , bearing no.6206 , bearing no.6304 , gas stop valve lpg 1 or 2inch , steel plate thick 10mm size 0.5mx0.5m , key pad for cuc card steel mk1v , key pad for cuc card mkii , anchor fastener length150mm dia 10mm gi , anchor fastener length150mm dia 12mm gi , anchor fastener length150mm dia 16mm gi , nut bolt length 1inch dia 6 mm , counter bolt 8mm, allenkey type, with lock nut , eye bolt for centering arm , spring,159a533,kosncris pt head , ss rod of gd or pt base , ss block of gd or pt base , linear bearing , optical cable for bar code sensor , automatic hot air sealing head , pneumatic cylinder size 500mmx50 norgan , 50 dia sealkit norgren , 50 dia sealkit janatics , solenoid coil for kosan filling scale- smc make , lpg hose of length 1 m , lpg hose of length 1.5 m , lpg hose of length 0.5 m , pencil sensor , rivet type conveyor chain , rod of kosan filling gun pneumatic type , kosan filling gun cup , dampner or kosan filling gun bush , kosan filling scale leg , lower bell for gd , vibration absorber for gd head , kosan fintec load cell for filling scale 200kg , load cell for jisl adjustment scale 650 kg , manual cvt head,kpot0122 carousel,kosncr , lifter plate for check scale , c channel of conveyor , telescopic boom pipe length 6m dia 1.5inch , drag chain , boom e plate with taflon ss thickness-10mm 1mx1m with taflon 12mm , mark iv display , reflector for kosan carousel , lpg filling gun pneumatic type , pneumatic counter , vacuum or suction indicator

CTN :45715693

15 Jul, 2026 19.48 Lacs

Muzaffarnagar - Uttar Pradesh

Tender For tender for supply of erection and fabrication work - pan/quad bodies ki kamzor shell ko kaatkar hatana. 10/12 mm moti plate se taiyar kar yathasthan lagana. andar aur bahar se double coat welding kar leak/proof water/vacuum trial dena. , quad evam pan par lage vapour/steam line mein lage 600/1000 mm dia ke right/angle type vapour valves ko dismantle kar valve ki leak/proof marammat karna evam testing uparant punah yathasthan fit karna. , pan/quad ke vapour pipe ke gale/kamzor vapour pipe bends ko naye fabricate karke badalna 600 mm se 1100 mm dia. , quad evam pan ke vapour pipes. vapour/exhaust steam lines ko majbooti pradan karne ke liye angle iron athva plate se t/rings banakar support dena. , vapour cell. semi/kestner. pan va quad bodies ki purani gali steam jackets ko hatakar nikalna. 10/12 mm plate se naya banakar lagana tatha leak/proof trial dena. , pan. quad. vapour shell adi ka fin type cyclone fit karna. naya 8/10 mm plate se banakar fit karna tatha welding kar santoshjanak trial dena. , quad/pans par sthapit vibhinn steam ke gale/kamzor/leaky valves ko kaatkar/kholkar hatana tatha valve ki vanchhit marammat uparant nirdeshanusar fit karna. , air cooled/dry seed/vacuum/twin vertical crystallizer ki drive ke kshatigrast/ghise hue worm wheels ki gland housings ke bush badalne ke liye worm wheel evam worm shaft housings ko dismantle kar alag karna. gland housings mein naye gun metal bush lag jane par housings ki fitting uparant uplabdh karaye gaye worm wheel evam worm housings ko poorv ki bhanti fit kar alignment karna. , vacuum crystallizer ke shell ke gale/kamzor bhagon ko kaatkar hatana. nai/purani plate se shell modkar yathasthan fit karna. andar aur bahar se leak/proof welding karna tatha bahar se vanchhit strengthening karna. , air/water cooled/vacuum/twin vertical crystallizer ke kshatigrast danton wale worm evam worm wheel ko dismantle kar hatana evam unke sthan par naye worm evam worm wheel fit karna. reduction gear evam motor fit karke alignment karna evam trial dena. , pans/crystallizers par lage vibhinn gutters mein se kamzor gutters ko kaatkar hatana. purani plate se banakar lagana. , air/water cooled crystallizers ki purani/kamzor/tooti hui shaft ko dismantle karna. nai shaft taiyar kar yathasthan lagana evam samast arms lagakar santoshjanak trial dena. , air/water cooled crystallizers ki shaft ke gale/kamzor bhag ko kaatkar hatana. m.s. plate se shaft taiyar kar naye pipe ki shaft yathasthan fit karna evam samast arms poorv ki bhanti lagakar santoshjanak trial dena. , crystallizers ki drive shaft ke dono taraf dheele hue/ghise gun metal bush bearings ko nikalna. naye bush fit kar trial dena. , air/water cooled crystallizer ki shaft par lagi kamzor arms ko kaatkar hatana aur m.s. plate/pipe se nai arms fabricate karke shaft par lagakar sucharu trial dena. , air/water cooled crystallizer ke leaky/kamzor gate valve ko repair karke leak/proof fitting karna. , spray hetu sthapit mf 35x35 spray pumps ke elliptical suction pipes mein se gale/kamzor section pipes ko dismantle kar hatana. 8/10 mm moti m.s. plate se sample anusar may strainer fabricate kar yathasthan fit kar leak/proof trial dena. , quad/pans ke condenser mein lage multi/jet spray boxes ki vanchhit marammat karna. , spray pond ke main header. branch header evam branch lines ke gale/kamzor bhagon ko kaatkar nirdeshanusar nai evam purani plate se taiyar kar yathasthan fit kar leak/proof trial dena. , common injection header ke kamzor bhag ko kaatkar hatana. naya fabricate kar yathasthan erection kar leak/proof trial dena. , injection. spray pump ki drive motor ke gale/kamzor resistance box taiyar karna. sabhi internals fit karna. connection kar santoshjanak trial dena. , vertical spray pump ke gale/kamzor base frame ko dismantle karna. poorv ke anusar naya bed fabricate kar level karke yathasthan lagana evam pump fit kar alignment kar dena. , pans ke gale/kamzor feed distribution headers ko kaatkar hatana tatha unke sthan par nirdeshanusar m.s. plate

CTN :45716586

14 Jul, 2026 1.36 Lacs

Bulandshahr - Uttar Pradesh

Tender For tender for supply of direction control valve , dc male/female connecto , return line filter(rlf) for hydraulic grab uttam/fhe make , 1 inch water pneumatic valve spare parts size - 25nb model - nc-2 way make - kushako pneumatics 1 seal kit , suction filter , o ring for direction control valve (qty- 8 set) , seal kit for hydraulic cylinder (qty-8 set) , seal kit for hydraulic cylinder (qty-8 set) , dowty/ bonded seal size - 1 inch bsp , manifld block , hydex coupling no-48 , gear pump suitable for hydraulic grab having pressure of 220bar and 54lps with inner and outer flange allen key bolts and o-rings , hydex coupling no - 28 , coil for dcv (24 v dc)

CTN :45733076

06 Jul, 2026 NA

Sojitra - Gujarat

Tender For 1. purchase of necessary goods for the sanitary department of municipality; 2. purchase and repair of necessary goods for the streetlight department of municipality; 3. repair of motor, rewinding, and starter for the water/meter motor in the water/meter department of municipality; 4. purchase of necessary goods for the stationery department of municipality; 5. printing work for the stationery department of municipality; 6. annual rate for the work of cleaning gutters by skilled laborers/contractors in the gutter department of municipality. note: for details of items 1 to 5, the last date for submitting tenders is 05/09/2023, and the last date 7. supply of necessary galvanized/non-galvanized, h.d.p.v.c.v.c.c. pipes and fitting materials for the water supply department of municipality; 8. annual rate for supplying submersible motor, panel, cable, valve and related accessories for the existing pumping station in sojitra municipality; 9. annual rate for painting the existing water tanks in various areas of sojitra municipality; 10. annual rate for supplying and repairing valves (53mm to 200mm dia) of hdp/pvc/di/ci/cc pipes for the water works pipeline and annual rate for supplying pipes of all types and similar materials; 11. annual rate for computer service maintenance and printer refilling/service for office use in sojitra municipality (hp 1007, hp 1020 (no.-5), samsung-1610, canon mf4320, mfc-j430w color printer); 12. annual rate for supplying and fitting cement concrete blocks and paver blocks for gutters in the gutter department of sojitra municipality; 13. annual rate for labor and material for laying new lines for rainwater drainage in various areas of sojitra municipality; 14. annual rate for supplying necessary materials like cement, sand, gravel, bricks, soil, etc., for the construction of new gutters in various areas of sojitra municipality; 15. annual rate for supplying various items like k.j.b.c., small tractor, trolley, engine oil, hydraulic oil and all other spare parts; 16. annual rate for repairing various items like power pack, 30 h.p.t.a.m.t.d. tractor, water bowser, weighing machine, street light, water pump, water tank, and trolley with k.j.b.c. and s.m.t.d. in various areas of sojitra municipality; 17. annual rate for repairing punctures of k.j.b.c. tractor and trolley tires in the sanitary department of sojitra municipality; 18. annual rate for supplying new tires for k.j.b.c. tractor and trolley in the sanitary department of sojitra municipality; 19. annual rate for repairing super suction machines for cleaning new and old gutters and manholes in sojitra municipality; 20. annual rate for supplying a4 size paper for daily office work in sojitra municipality (approx. 1000 reams); 21. annual rate for supplying new motor pump, cable, panel, starter and other materials up to 10 hp for the existing pumping station in the water works department and fitting work; 22. government work, vehicle rental; 23. supply of drinking water in municipality. 24. annual rate for supplying various items like stage, speaker, mic, chairs, tables, etc., for various programs held in the municipality; 25. annual rate for providing tea and snacks for officers, visitors, survey teams, and other municipal officials visiting the municipality for higher education; 26. annual rate for various schemes for government/public welfare work to be done throughout the year; 27. annual rate for digging new gutters in the municipality area.

Lubrication Valve Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

Central Government/Public Sector

Central Government/Public Sector