Latest lumber Tenders | Government lumber Tenders

CTN :39406597

24 Apr, 2025 NA

Agartala - Tripura

Tender For corrigendum : e-tender for procurement of dressing dispensing and nursing materials for different health institutions - name of the item with specification, absorbent cotton,500gm, auto clav(portable), absorable dusting powder, adhesive tape size-5cm x 5m, adhesive tape size-10cm x 10m, adhesive tape size-2.5cm x 5m, adhesive tape size-7.5cm x 5m, bp blade size-10, bp blade size-23, bp blade size-24, band aid, bp instrument flat, bp instrument stand type, baby wormer, baby wormer bag, bp instrument, electrical, blood bag single size- 350ml, blood bag double size-350ml, blood bag triple size-350ml, blood transfusion set, corrugated rubber sheet, crep bandage, colour coded plastic bucket (black), colour coded plastic bucket (blue), colour coded plastic bucket (red), colour coded plastic bucket (white), colour coded plastic bucket (yellow), colour coded plastic waste carrying bag, dispo syring size-10 ml, dispo syring size- 2 ml, dispo syring size- 3 ml, dispo syring size- 5 ml, dispo syring size- 20cc, dressing drum size- 11" x 9", dressing drum size- 12" x 9", dressing drum size- 9" x 9", dispo lancet, dosofix, enema syringe, enema set, eneme cane, e.i. kidney tray size-6", e.i. kidney tray size-8", e.i kidney tray size-10", ecg machine, face mask (blue), folis catheter size- 10, folis catheter size- 12, folis catheter size- 14, folis catheter size- 16, folis catheter size- 18, glucometer, gum boot, height measuring scale, hot water bag, hot air oven, i.v. cannula size-14g, i.v. cannula size-16g, instrument sterilizer size- 6x8x20, instrument sterilizer size- 4x6x16, instrument sterilizer size- 4x6x12, instrument sterilizer size- 4x6x14, kidney tray s.s size-6", kidney tray s.s size-8", kidney tray s.s size10", lumber puncture needle size-20g, lumber puncture needle size-22g, lumber puncture needle size-23g, lumber puncture needle size-25g, lumber puncture needle size-26g, micro infusion set, needle-round body, needle curved body, needle destroyer, oxygen cylinder regulator, oxygen mask (adult), oxygen mask pediatric, plastic bag red, plastic bag black, plastic bag blue, plastic bag yellow, plastic bag green, paraffin gauze 10 x 10cm, plastic bin green size- 100l, plastic bin red size- 100l, plastic bucket 50l (black), plastic bucket 50l (red), plastic bucket 50l (blue), plastic bucket 50l (yellow), plastic cutter, plastic doctors apron, plastic water apron, p.o.p. bandage 10cm x 2.7cm, p.o.p. bandage 15cm x 2.7cm, p.o.p. bandage 7.5cm x 2.7cm, post mortem gloves(assor.), post mortem set, ract.tray (s.s) size- 10" x 8", ract.tray (s.s) size- 12" x 10", ract.tray (s.s) size- 14" x 12", ract.tray (e.i) size- 10" x 8", ract.tray (e.i) size- 12" x 8", ract.tray (e.i) size- 14" x 12", ryles tube 8, ryles tube 10, ryles tube 12, ryles tube 14, ryles tube 16, rubber catheter 8, rubber catheter 9, suture needle round body, suture needle curve body, saline infusion set, scalp vein sets-22, scalp vein sets-24, stomach wash tube, (adult), stomach wash tube, (baby), surgical gloves - 6", surgical gloves - 6 1/2", surgical gloves - 7", surgical gloves - 7 1/2", stathoscope, sphygmomametre, single drum auto-clav 14 x 12, sternal puncture needle, thermometer, weight machine (adult), weight machine (baby), uro bag, refrigerator 170/180 ltrs., stabilizer for refrigerator, i.v. cannula size-18g, i.v. cannula size-20g, i.v. cannula size-22g, i.v. cannula size-24g

Central Government/Public Sector

CTN :40025252

15 May, 2025 1.13 Crore

Jaduguda - Jharkhand

Tender For supply of vitrified tiles laid with cement based high polymer , vitrified tiles laid with cement mortar , ceramic glazed wall tiles , grouting the joints of flooring tiles , providing and fixing aluminium work -for shutters of doors, windows , providing and fixing aluminium work- for fixed portion powder coated aluminium , providing and fixing 12 mm thick prelaminated particle board , providing and fixing glazing - with float glass panes of 4.0 mm thickness , providing and laying structural steel work riveted , 24 mm thick factory made pvc door shutters , 35mm thick isi marked flush door , providing and fixing in position collapsible steel shutters , providing and fixing 18mm thick pre-laminated medium density fibre board , providing sal wood work in frames , providing and fixing 15mm normal bore g.i. union , providing and fixing 20mm normal bore g.i. union , providing and fixing white vitreous china pedestal type water closet , providing and fixing water closet squatting pan , providing and fixing wash basin with c.i. brackets , providing and fixing white vitreous china urinal basin , providing and fixing one piece construction white vitreous china squatting plate , providing and fixing 600x450mm bevelled edge mirror , providing and fixing 600x120x5 mm glass shelf , providing and fixing ptmt towel rail complete with brackets , providing and fixing ptmt liquid soap container , providing and fixing 15 mm bided or jet spray , providing and fixing c.p. brass shower rose , providing and fixing c.p. brass stop cock , providing and fixing c.p brass close hole wall mixer tap , providing and fixing 15 mm nominal bore c.p brass angle valve , 75 mmwaste and vent pipes , 100 mm waste and vent pipes , providing and fixing c.p. brass bib cock , demolishing cement concrete , dismantling old plaster or skirting raking out joints , providing and laying plain cement concrete 1 is to 3 is to 6 , providing and laying in position cement concrete of 1 is to 2 is to 4 , providing and laying 1st class brick work with bricks of class designation 75 , half brick masonry with common burnt clay , providing and laying 12 mm thick cement plaster 1 is to 6 , providing and applying two coats of white washing with lime on old work , providing and applying white cement based putty , providing and applying one coat of cement primer , providing and applying wall painting , supplying and laying two or more coats painting with synthetic enamel paint , earth work in excavation in foundation, , providing and fixing centering and shuttering , providing and fixing 18 mm thick granite

corporations/Associations/Others

CTN :39992195

21 Apr, 2025 NA

Ratnagiri - Maharashtra

Tender For supply of table t-101/ t-8, one side 3 drawers. size: 1199x590x735 mm godrej make. , table t-8 of godrej make in grey colour or similar. , godrej chair m. no. pch- 7112 r. ( color* for office t. blue/c. code 5035. glory* for station deep navy/c. , godrej make pulse mid back chair with adjustable neck rest and lumber pad adjustable seat height bac , visitors chair (godrej make bravo visitor chair centre tilt synchro nylon pedestal pp fixed arms nyl , hof make zor model mid back elite revolving chair or similar

CTN :39990878

07 May, 2025 NA

Halisahar - West Bengal

Tender For supply of procurement of wooden wedges size : 250 mm x 100 mm x 100 mm to clw's drg. no. 4w.12000.054, alt. no. a, material : seasoned sal wood with csi > 88, for conventional and 3 phase locomotives.

CTN :39991133

17 Apr, 2025 26.62 Lacs

Delhi - Delhi

Tender For repair maintenance of to water supply during 2025-26 at pushp vihar, residential colony m.b. road, new delhi. (sh:- supplying & fixing of lumber processor at sector-4, pushp vihar, new delhi).subwork/packages:sh:- supplying & fixing of lumber processor at sector-4, pushp vihar, new delhi.

CTN :39950949

15 Apr, 2025 NA

Berhampur - Odisha

Tender For supply of handloom item- improved iron frame cycle rim charakha - (fitted with chain and crank). cycle rim iron frame charakha - (fitted with crank only). , brass reed -(pitch bound & chanel reed ) - 56x52", 60x52", 64 x52", 685x52", 725x52", 84x52", 88x52". , stainless steel reed --(pitch bound & chanel reed )- 56x52", 60x52", 645x52",685x52", 72 x52", 84x52", 885x52". , c.v. heald (2 shaft & 4 shaft) - 56x52", 60x52", 64 x52",685x52", 72x52", 84x52", 885x52". , frame loom - 52"-56" reed space, 5 wheel take up motion, sal wood frame, slay, , slay -race, shuttle box is made up of teak wood. , plastic/ wooden pirn (length-3.5" & 4"). , sizing spray. , nylon twine- count no.-0, 1, 2,. , throw shuttle (local & brand) (length-11" & width-1.2"). , fly shuttle (local & brand)(length-10", 12", 14"). , plastic / wooden bobbin (big, medium & small) (flange size 1.5" & 2.5" x 5" to 6" length). , heald hook (length-8"). , warping machine 72" with complete set (cast iron wheel)

State Government

CTN :39924307

19 Apr, 2025 22.23 Lacs

Jalandhar - Punjab

Tender For supplying and installation of furniture for 4 no. temporary courts at existing judicial courts complex jalandhar - judges - main chair for court & retiring room - providing, supplying and placing of high back chair for dias / retiring room . seat/back assembly: the cushioned seat assembly consshould be ts of seat outer (material-30% glass fiber nylon)& upholstered seat inner (material- poly propylene) with moulded polyurethane foam & polyster fabric. the net back should be made up of back outer (material-glass fiber filled nylon)& back inner (material- pp) and upholstered using polyester mesh fabric with high tenacity yarn. full back size: 46.5 cm. (w) x 60.0 cm. (h)seat size : 51.0 cm. (w) x 49.0 cm. (d)high resilience (hr) polyurethane foam: the hr polyurethane foam should be moulded with density = 45 +/- 2 kg/m and hardness load 12 +/- 2 kgf for 25% compression.back spine: the support spine should be made up of high pressure die cast polished hed aluminum.armrests : the armrest should be having two adjustment, height (6.0 0.5cm) and depth (6.0 0.5cm). height adjustment should be provided in aluminum structure of armrest which should be connected to aluminum back spine and should be operated by button. the depth adjustment should be provided in pad which should be fixed to armrest structure. armrest top should be made up of pu molded over plastic inner.active bio-synchro mechanism: the adjustable tilting mechanism should be designed with the following features: 360 revolving type front-pivot for tilt with feet resting on ground & continuous lumber support ensuring more comfort tilt tension adjustment can be operated in seating position 5 position tilt limiter giving option of variable tilt angle to the chair seat / back tilting ratio of 1:2 the mechanism housing should be made up of hpdc aluminum & black powder coated (dft 40 to 60 micron)seat depth adjustment: seat depth adjustment should be integrated in the seat through a sliding mechanism. seat depth adjustment range should be of 3.75 0.1 cmlumbar support assembly: the lumbar support assembly should consist of lumbar spine (material-glass fiber filled nylon) which should be fixed to aluminum back spine. the lumbar pad (material- poly propylene) should be fixed to lumbar spine through lumbar pad support. lumbar support assembly has height adjustment of 5.0 0.5cm.pneumatic height adjustment: the pneumatic height adjustment has an adjustment stroke of 10.0 0.3cm.pedestal assembly with castors:the pedestal should be high pressure die cast polished aluminum and fitted with 5 nos. twin wheel castors. the pedestal should be 65.0 0.5cm. pitch-center dia.(75.0 1.0cm. with castors.)headrest :the neckrest assembly consshould be ts of upholstered neckrest inner(material-polypropylene) with moulded polyurethane foam and polyster fabric.upholstered inner should be fixed to neckrest cover.neckrest should be fixed to back assembly through neckrest spine .neckrest assembly has height adjustment of 5.5 +/- 0.5cm and rotation adjustment of overall 20 +/- 2 .twin wheel castors: the twin wheel castors should be injection moulded in black pp having 6.0 0.1cm wheel diameter.overall dimensions of chairseat height - min 45.5 to max 55.5cm, reader / steno chair: providing, supplying and placing of mid back chair reader /steno chair . seat/back assembly: the cushioned seat assembly consshould be ts of seat outer (material-30% glass fiber nylon)& upholstered seat inner (material- poly propylene) with moulded polyurethane foam & polyster fabric. the net back should be made up of back outer (material-glass fiber filled nylon)& back inner (material- pp) and upholstered using polyester mesh fabric with high tenacity yarn. mid back size: 36.5 cm. (w) x 55.0 cm. (h)seat size : 51.0 cm. (w) x 49.0 cm. (d)high resilience (hr) polyurethane foam: the hr polyurethane foam should be moulded with density = 45 +/- 2 kg/m and hardness load 12 +/- 2 kgf for 25% compression.back

Central Government/Public Sector

CTN :39858665

18 Apr, 2025 NA

Malanjahknd - Madhya Pradesh

Tender For supply of wood and ply wood for civil - 280300004 sal wood in different sizes , 280500001 bija wood in different sizes , 280400002 plywood 12mm size 6 inch x 4 inch , 280400005 ply wood 4 mm 8 inch x 4 inch , 280400007 ply wood 6mm thick commercial

State Government

CTN :39824314

18 Apr, 2025 20.00 Lacs

Shahdol - Madhya Pradesh

Tender For tender for supply of materials fy-2025-26 - window, door pks[kv ventilation etc. material made including material (iron), rolling shutter (sq. metre) in standard gauge, profile sheet (isi mark) 18 gauge, tresses/purlin (tata isi), iron gate of prescribed size as per estimate for installation in plantation site, iron board of prescribed size as per estimate for installation in plantation site, gi sheet 1 mm is, window, door frame (chokhat)- sal/bija/satkatha wood frame, window, door panels veneered flat pressed three layer graded wood particle board window door panel as per is 3097 grade-i, gi wire isi mark, turpentine oil isi mark, paint branded (color as per requirement) (isi mark), oil bound distemper isi mark, emulsion isi mark, wall putty isi mark in 20 kg bag, kota stone 20-25 mm thick, unels khila steel isi mark, asphalt, ochre, lime, tape 02 meter measuring tape with weighing department seal, tape 10 meter measuring tape with weighing department seal, marker pen for writing on wood

Lumber Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

corporations/Associations/Others

State Government

Central Government/Public Sector

State Government