Latest machine crushed ballast Tenders | Government machine crushed ballast Tenders

Central Government/Public Sector

CTN :45479062

02 Jul, 2026 NA

Moradabad - Uttar Pradesh

Tender For supplying & loading, leading, unloading & stacking of 50000 cum machine crushed stone ballast of 65 mm gauge size as per railway specification including loading of ballast into rly. wagons / hoppers at pathri sub depot-b under sr.den/co./mb.

State Government

CTN :45231232

11 Jun, 2026 NA

Ghaziabad - Uttar Pradesh

Tender For corrigendum : supply and execution items for reliability improvement of signalling inst. section of sr. dste/1/lko of lucknow div. nr. - excavating and refilling of trench to the level of ground with rammed earth asper drg. no.(nr/s&t/con/1.1/97a) so as not to form a drain 0.3 mtrs wide & 1mtr deep on both side of the station along side the track. it shall confirm to the safe distance as per signalling and cable plan in all type of soil, it also includes clearence of roots of trees and bushes., excavating and refilling of trench 0.3 mtrs wide & 0.8 mtr deep on pitced/stone/bricks paved surface, road/crossing/platform etc. and restoration of surafce to original condition., laying of signalling/telecom/power cables of different sizes as per attached guidelines (drg. no.(nr/s&t/con/1.1/97a) or latest on signalling cable laying and as per cable route plan approved by railways through trenches, rcc pipe, dwc pipe, gi pipe etc and meggering of cable before and after its laying of all type of outdoor cables. contractor have to transport cable from any store of lko division to site carefully. meggering to be done for each drum separately. meggering sheets to be supplied and filled up by contractor and submitted to railways, as per instructions by consignee., supply and laying of 2nd class bricks in the trench and laying as per drg. no. (nr/s&t/con./1.1/97a) or latest and as per instruction of the site engineer., boring and trenchless cabling along with supply and insertion of hdpe/dwc self lubricated pipes as per rdso spec no. rdso/spn/204/2011 ver 1.1 or latest of 120mm nominal dia in the bore at the depth of 1.4 meter to 2.1 meter from formation level (level of earth below ballast) as per drawing and as directed by engineer incharge by trenchless technology for laying of signalling /telecom/power cable under track /culvert etc. cable laying covered separately. inspection-consignee for supply of dwc/hdpe pipe. the following required coupling arrangement should also be supplied: 1. suitable snap fit couplers withrubber o ring, 2. spacers, 3. tees. 4. bend. 5. end cap(1 no. =6mtr ,straigh tpipe). (a) the cost shall include horizontal boring through any intermediate obstruction, either natural or man made or any boundary etc. (b) the rate is inclusive of all the materials equipment and labour required for during trenchless horizontal boring under the railway track. nothing extra shall be admissible on any account than the rate quoted above. (c) the pipeis to be laid underrailway track/road /culvert. all necessary arrangement are to be provideand all precautions are to be end is not deviated from the horizontal level line by more than 250mm in horizontal and vertical direction. (d) the rate shall be inclusive of direction and protection of underground utilities encountered during boring. (e) the payment for boring shall be made only when dwc/hdpe pipe are laid in the bore., concreting unschduled items in concrete of 1:3:6 ratio in cement, coarse sand and aggregate 25mm at different places in the yard and plastering top in fine plaster of 1:4 cement sand ratio. it also includes the excavation of earth as required at site and as per instruction of site incharge. the volume in cubic metres shall include the volume occupied by any ci foundation, trestle, ms angle or flat or gi pipe required to be embedded in the casting. cement coarse sand and aggregate 25mm are to be supplied by the contractor., earth work for excavation and refilling around location boxes and signals etc. where necessary including 50m lead and 1.5m lift. the lead is to be measured from centre of gravity of location to the centre of filling and lift from main ground level. the earth work should be well rammed including breaking of clods, levelling and dressing etc. as per instruction of engineer at site., brick work with well burnt bricks in foundations and plinths with cement and sand (ordinary) mixture of 1:4 ratio. all material is to be supplied by th

CTN :45436112

23 Jul, 2026 NA

Multi City - Multi State

Tender For request for proposal for construction of the km: 400.169 to km: 391.898 for 3rd line i.e. the 8.271 km and the km: 403.005 to km: 392.300 for 4th line i.e. the 10.705 km, total 18.976 km between sini and kandra junction, complete gauge conversion of the existing track over the same stretch, civil engineering works: earthwork in formation including cutting, filling, blanketing, turfing for new track alignment, extension and strengthening of minor bridges and construction of major bridges, construction of side drains for proper drainage, permanent way works including track linking and alignment, supply and laying of 50 mm machine crushed stone ballast as per railway specifications, associated civil and track works at sini and kandra block sections to support the new lines and gauge conversion, execution of indoor & outdoor s&t works in connection with clearance of infringement to facilitates the civil works for the 3rd and 4th lines in the sini-kandra block section, execution of general electrical works, installation and commissioning of overhead equipment (ohe) for traction and power supply of chakradharpur division on s. e. railway on engineering, procurement & construction (epc) mode.

CTN :45438685

25 Jun, 2026 NA

Multi City - Multi State

Tender For supply of 65mm gauge machine crushed track ballast (hard stone) conforming to rdso specification irs-ge-1 february 2023 (as updated), via rail network (loaded in indian railway bobyn (or equivalent) wagons)/ supply by road in between section new son nagar (sebn) to new unchdih (undn) for 2 year of edfc under cgm/ddu.

Central Government/Public Sector

CTN :45455055

24 Aug, 2026 NA

Lucknow - Uttar Pradesh

Tender For "civil engineering works i.e. earthwork, blanketing, minor bridges, major bridges, level crossing works, station buildings, platforms, fobs etc., ballast supply and p.way works (except line sleepers, rail), telecommunication works, ohe works, general electric works and other allied works for doubling work of phaphamau jn. to kunda harnamganj (exc.) 39.910 km) section in connection with phaphamau-unchahar (72.270 km) doubling of lucknow division of northern railway"

Central Government/Public Sector

CTN :45334811

24 Aug, 2026 NA

Lucknow - Uttar Pradesh

Tender For corrigendum : "civil engineering works i.e. earthwork, blanketing, minor bridges, major bridges, level crossing works, station buildings, platforms, fobs etc., ballast supply and p.way works (except line sleepers, rail), telecommunication works, ohe works, general electric works and other allied works for doubling work of phaphamau jn. to kunda harnamganj (exc.) 39.910 km) section in connection with phaphamau-unchahar (72.270 km) doubling of lucknow division of northern railway"

Central Government/Public Sector

CTN :45429713

16 Jun, 2026 NA

Igatpuri - Maharashtra

Tender For auction sale of pway scrap - scrap ms in mts consisting of 60kg, 52kg, 90r wing rail, v rails tongue rail, stock rail, check rail, sej off sizes alongwith ms bolts and nuts, fish plates and joggle fishplates. remarks - kachcha approach road is available nearby the lot. lot no. has been painted on the lot. delivery will be made on actual weighment basis only at nearest govt. approved weigh bridge. quantity is physically available. delivery will be made during all seasons. the stockholder will be fully responsible for any alteration, addition or deletion in the lot after joint inspection. since the materials are in pwi depot fresh receipts of similar type of released materials are continuously going on near the lot. as such the quantity available is more than the lot proposed. approx weighment is taken as per advice of sse/pway/igp. care should be taken that the same is not delivered only actual lot material weight will be delivered. ci blocks attached with wing and v rails to be cut and returned to the stock holder. only scrap materials mentioned and quantity as per do qty and joint inspection report, ss11 to be delivered. some scrap rails such as 20 rail pieces of 60/52 kg lying near the stack no. 3 & 185 nos of rail 60 kg lying near the stack no 4, 14 nos rail piece of 60 kg and 46 nos rail of 82 lbs lying near the stack no.5, 40 nos of new glued joint 60 kg lying near the stack 7, 93 rail pieces of various sizes near the stack no. 6 and 51 nos of st sleepers lying near the stack no. 6. dounages 09 nos are not included in lot it should not be delivered at the time of delivery. the purchaser shall be responsible for any loss or damage to any other railway property/facility/equipments whether due to his negligence or otherwise and safety of his labour. the quantity as per ss-11 has been amended from 82.311 mts to 84.316 mts. sse (p-way) igp will make necessary corrections in quantity on udm. location - ele. loco shed line km igp/el34-47 up yard, near sse c&w office igatpuri, near old rpf barrak igp up yard & ballast siding km igp/bs 4-5 up yard. qty - 84.316 mts. approx. stock holder - sse (p.way) igp. (original lot no. 014333-25-00005.)

Central Government/Public Sector

CTN :45431584

09 Jun, 2026 NA

Multi City - Gujarat

Tender For auction sale of depot ferrous scrap - 98050114 scrap release all types of railway ferrous material consisting of s&t, p way, works and ohe items c & w items- such as ms, gi, ci containing signalling units, rods, junction boxes, panels, ms gi structures, ladders, mast, rtu, cb, etc. and all other types of signaling items, gear case, the ground connection, ohe fitting, ms chains, heavy structure almirah/racks, rods angle, top housing, road bar, glude joint, ground connection channel, pipes, lc material, ladders, jali, spring plank, pantograph with or without pneumatic motor, gate, door, brake cylinder, tie bar, fencing, trolley, ms machines etc., tmt bars rods, pulley, rib cage, point machines without motors, wagon body cut piece bogies side frame, machines, sleeper, ms sheet, various types sleeper part, tie bar, fencing bars, i-beam, damaged empty drums, light fittings, rail & rail pieces, ms wires, junk light weight/corroded material consist of toughened sheets, m.s./gi sheets, grease seal, drum, wire, parts of rolling shutter, light weight cuttings, various damaged and rusty drums filled with coalter, dry paint, mud and dray fo if any of sort and sizes, g.i. buckets, steel buckets baskets, signal lamps, duct, vent pcs., fencing and pipes, wire mesh, stretcher, bicycle, pan, frames, electrical fittings, t.l. fittings, grill- jali, cabinet frames, rack ballast, rusted body and parts of weighing machine, electronic/electrical material, small rods angle, battery boxes, tool boxes, shovel, rail door handles, main door, foot plate, step plates, bench pipes, typewriter g.i. pipes, trolleys, water tank bond, location box with or without their component and wiring fittings, trolly, different type of ohe bonds of rail and other various ms fabricated structures, break load rings, pins, screw, bolts, spikes, keys, loco parts, stay rods, sleeve for centre pivot, pantograph parts, palm pull rods, lever, axle box housings, air motor, springs of pantograph, connecting rods, and other rods, rear cover of axle box housing, longer hanger, spare parts of spt machine, pipe fittings, end shield covers, break beam hangers, brake shoe, vertical lever, suspension levers, compressor spares, tension rods bushes, dash pots, ms& wi turning borings cut, collars, vehicle spares, ci items consisting of rusty and dusty drainage pipe, valve, meter, brake block, pulley, motors body, pipes, plates, d.v, vacuum cylinder chamber, pig irons pieces, signaling box ohe fittings, steel furniture consisting of chairs, tables, g.i. separation sheet, chair , stretcher, beds, ms rack, almira, other types of steel furniture of sorts and sizes, broken, damaged with or without wood, cushions, plastic, mica, foam seat attachment, parts brake liner, thrust bearing, spring, yoke, insulation block hangers, slides, locking rods, parts of point machine, a b cover, break head, cylinder head, pcs. of break beam, protective tubes, and other p-way fittings, coupler, knuckles, cp top/bottom, pu pad, narrow/wide jaw adapter, released bulk head components, wagon doors, cutting plate, and assorted cut pieces thereof, fabricated from irsm 44, etc. brake cylinder, cs & ci if any. valve, broken pcs. of bearings, inner and outer race of bearings, spares of break valve, trolley wheels, clamps, bmbc parts, pump shafts, impellers, tension device parts, fan armatures, chain sling, rev. center, hooks, spares of trucks, accessories of transformer, fish plates, hooks, silent blocks, cut pieces of plates, doors, angles, etc., all plastic items, rubber and wooden , fasteners such as bolts, nuts, and other related misc, etc., with or without, rail, of sorts and sizes with or without parts fittings and minor non-ferrous attachments, unserviceable. excluding items - railway track. remarks:the quantity estimation is based on visual observation and is indicative only. the lot has been prepared to clear the land before handing over the scrap yard for memu work. 2. loading will be allowed

Central Government/Public Sector

CTN :45334452

15 Jun, 2026 NA

Lucknow - Uttar Pradesh

Tender For linking of b.g. track & turnouts, provision of glued joint & sejs, ballast supply in cess, handling, lifting, loading, unloading and spreading of ballast, leading of p-way materials, and others allied works i.c.w. chord line connecting mfj (ner) -jnu-mgwn bypassing jnu (jaunpur jn) & chord line connecting djd(ner)-shg-bwi bypassing shahganj of lucknow division on northern railway

Central Government / Public Sector

CTN :44436691

26 May, 2026 NA

Jeypore - Odisha

Tender For corrigendum : jeypore -nabarangpur new railway line project: construction of new bg railway line between ambaguda (excluding) (13.60 km) to nabarangpur(including) (43.99km) involving earthwork in formation in embankment/cutting, blanketing, side drains, catch water drains, minor bridges, major bridges (excluding br.no.85 at km 37.080 i.e indravati bridge) , road over bridges (robs), road under bridgees (rubs), protection works, p.way track works with contractor's own material supplies including supply of track ballast, new wide based psc sleepers, special psc sleepers (for turnouts, improvised sejs, guard rails etc.), points (thick web switches) & wcms crossings, glued joints, h-beam/composite sleepers over girder bridges, improvised sejs, all p-way fittings, 2x25 kv ac ohe works, 2x25 kv tss with sp/ssp works along with scada, modification/conversion to underground for overhead electrical ht/lt power line crossings, electrical general services, construction of platforms, station buildings, service buildings, sp/ssp buildings, trd depot building with tower wagon shed, residential buildings, water supply, indoor and outdoor electrification etc. on epc basis in waltair division of east coast railway.

Machine Crushed Ballast Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors