Latest machine foundation Tenders | Government machine foundation Tenders

Central Government/Public Sector

CTN :45731454

06 Jul, 2026 NA

Ahmedabad - Gujarat

Tender For supply of set of foundation gaskets for mrb and tmb of wag9hc loco, set consist of 3 items in 08 nos. as given below 1) top gasket for machine room blower duct as per drg no-c/els/lgd/rc/4/19.alt 1 or latest-02 no/set. 2) bottom gasket for machine room blower duct as per drg no-c/els/lgd/rc/4/20, alt. 1 or latest-2 no/set 3) set of top and bottom gasket for traction motor cooling blower duct as per drg. no- c/els/lgd/aux4/61 each 4 no/set. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government And Public Sector

CTN :45737615

30 Jul, 2026 NA

Bhilai - Chhattisgarh

Tender For supply, installation, foundation work, and commissioning of air cooled electrically driven fixed speed with inlet modulation, oil lubricated screw type air compressor with acoustic enclosure. capacity -500 cfm, 10 kg/cm2 in accordance with attached technical specifications and scope of work..tolerance of 10% (+/- 10 %) in motor rpm may be accepted. hence speed of the main motor should be 1500 (+/- 10 %) rpm. [ warranty period: 30 months after the date of delivery ] ]

CTN :45720703

30 Jul, 2026 2.00 Crore

Chhatarpur - Madhya Pradesh

Tender For inviting rates of different items for construction of diffrent type of work as per demand on cm help line or ward parsad or public - supply of handpump material 2026-27, excavation for roadwork in soil with hydraulic excavator including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transporting to the embankment location with all lifts and lead up to 1000 m as per section-300 of the specifications.item no nvi-3.12, construction of embankment/sub-grade/earthen shoulders with material obtained from other sources, as per provisions of section 305 of the specifications, with approved materials/soil confirming to requirements given in table 301-1 of specifications including all lead and lifts, including cost of watering, compaction by vibratory roller/heavy pneumatic type roller etc. confirming to requirements given in table 301 2 of the specifications complete.item no nvi-3.12, construction of granular sub-base, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method at omc and compacting with vibratory roller of 80-100 kn static weight to achieve the desired density, including all lifts and lead complete in all respect as per section-400 of the specifications.by mix in place method item no nvi -4.1.1.1, construction of dry lean cement concrete sub- base over a prepared sub-grade with coarse and fine aggregate conforming to is: 383, the size of coarse aggregate not exceeding 26.5mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be as per table 600-1 of the specifications, cement content not to be less than 150 kg/cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 mpa at 7 days, mixed in a batching plant, transported to site, laid with paver with electronic sensor/mechanical paver, compacting with 8-10 tonnes vibratory roller, finishing and curing and as per section 601 of specifications.item no nvi- 6.1.1, providing and laying cement concrete grade m-20 with 20 mm graded crushed stone aggregate, mixing shall be in mechanical mixer, laying with paver compacting by use of pin, plate / screed vibrators including form work by strong steel girders fixed by spikes, separation membrane 125 micron thick, including cutting of joints @ 4 to 5 m interval and filling it with hot applied bituminous sealant (without dowel bars) (max. thickness 20 cm).item no nvi-6.4, construction of dowel jointed, plain cement concrete pavement in m-30 grade concrete over a prepared sub base with 43 or higher grade cement, coarse and fine aggregate conforming to is:383 maximum size of coarse aggregate not exceeding 25 mm, mixed in a batching and mixing plant as per approved mix design, transported to site, laid with a fixed form or slip form paver with electronic sensor spreading the concrete by shovels, rakes compacted using needle, screed and plate vibrator and finished in a continuous operation including provision of contraction, expansion, and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, placing of dowel bar, tie rod admixtures as approved, curing compound, finishing to lines and grades as per approved drawings as per irc:15 and as per section-602 of the specifications complete excluding cost of steel in dowel bar and tie rod etc.item no nvi-6.2.1, earth work in excavation for foundation, trenches for pipes / cables or drains etc. by mechanical means / manual means (exceeding 30cm in depth.) including ramming of bottom,dressing of sides,disposal of excavated earth including of all lift and lead upto 50m.disposed earth to be levelled and neatly dressed.all kinds of soil item no nii 2.6.1, demolishing cement concrete manually/by mechanical means including disposal of material with in 50 meters lead as per direction of engineer-in-charge.1:3:6 or richer mixitem no nii

CTN :45732922

06 Jul, 2026 37.04 Lacs

Hyderabad - Telangana

Tender For construction of fresh fruit bunches(ffb) collection center with all-round fencing, cc platform, weigh bridge machinery foundations at chandrvancha (v) kosgi (m), narayanpet district, telangana state

corporations/Associations/Others

CTN :45715658

15 Jul, 2026 9.50 Lacs

Sonbhadra - Uttar Pradesh

Tender For supply of casing cover of swc pump , complete expansion tank make-up pump with motor, coupling set, foundation frame , complete bearing cooling water pump , complete stator water cooling pump , lantern ring of h2 gas cooling pump , split gland of h2 gas cooling pump , liquid deflector of h2 gas cooling pump , lantern bracket of h2 gas cooling pump , key for impeller of h2 gas cooling pump , key for coupling of h2 gas cooling pump , o ring of h2 gas cooling pump , oil seal of h2 gas cooling pump , internal circlip of h2 gas cooling pump , shaft sleeve of h2 gas cooling pump , impeller wear ring - ds , impeller wear ring - ss , casing wear ring - ds , casing wear ring - ss , helicoil screw lock inert of h2 gas cooling pump , lock washer - bearing lock nut of h2 gas cooling pump , pump casing of swc pump

Co-operative

CTN :45706677

04 Jul, 2026 NA

Kutch - Gujarat

Tender For proposed sarhad dairy drainage re-route and repairing work at sarhad dairy & foundation for compressor and other machinery foundation at utility building.

CTN :45671759

01 Jul, 2026 55.80 Lacs

Bhiwandi - Maharashtra

Tender For providing and supplying spare parts for all type of borewell as per requirement in b.n.c.m.c. area 2026-2027 - providing and supplying spare parts for all type of borewell as per requirment in bncmc area 2026-2027, :item no. 1 : providing and laying in trenches following mm dia. medium grade having embossed as isi mark galvanised iron pipes ?of kilogram/meter necessary fitting remaking good the demolished portion with filling trenches and with primer of anti-corrosive oil paint, 2 coats including removing existing pipe line if necessary and conveying and stacking the same in pwd chowky or as directed etc. complete. pwd ssr 2022-2023 pg no 268 41.20,41.21 25 mm dia, 32mm dia, item no. 2 : providing and supplying blue mdpe pipes conforming to iso 4427:1996 manufactured from virgin resin pe 80 food grade compounded raw material having blue colour only with quality assurance certificate from quality agencies like wrc / cipet (india) / dvgm / kiwa / spgn etc. for usage in drinking water system. the cost shall include testing of all materials, inspection charges, transportation up to store, transit insurance, loading, as specified and directed, unloading,stacking excluding gst levied by goi & gom in all respect, etc. complete as specified and directed.mjp dsr 2023-24 pg no 128/1/b 25 mm dia, 50 mm dia, item no 3 providing, erecting and giving test of centrifugal monoblock pump set conforming to is 9079 operating at 2900 rpm with ci impeller, priming funnel, cock, suitable flanges at suction and delivery side. pump shall have common shaft for pump and motor. motor shall be suitable for working on 415 v 10%, 3 ph, 50 hz a.c. supply. motor shall be tefc type. pump set shall be suitable for working at various discharge and head requirements. pump shall be erected on provided c.c. foundation block with suitable foundation bolts grouted in c.c. foundation block.centrifugal monoblock pump set (single stage) mjp mech.csr 2023-24 pg no 5 pm 2-1-5] 10 hp, item no 4 : supplying and erecting submersible pump 150 mm dia (with bronze / stainless steel (cf8m) impeller) up to 8 stages mjp mech.csr 2023-24 pg no 01 pm 1-2-1,pm 1-2-2] 1.5 hp, 2.0 hp, item no 5 supplying & erecting pressure booster pump, single phase, 50c/s, a.c.supply of 0.75 kw/ 1 h.p., with discharge of 480 to 13 lpm for 10 to 50 mtrhead & 25 mm suction/ 25 mm delivery pipe, for domestic pressure boosting applications pwd ele csr 2022-2023 pg no 206 12-6-2, item no 6 supplying & erecting pressure booster pump, single phase, 50c/s, a.c.supply of 0.375 kw/ 0.5 h.p., with discharge of 120 to 12 lpm for 10 to 40mtr head & 25 mm suction/ 25 mm delivery pipe, for domestic pressure boosting applications. pwd ele csr 2022-2023 pg no 206 12-6-1, item no. 7 supplying & erecting automatic control panel for 1 ph, 230 volt, a.c. submersible/centrifugal pump set up to 3 hp consisting of dol starter of suitable relay range s.p.p., combined ammeter/ voltmeter, phase indicating lamp enclosed in crca powder coated vibration proof enclosure with ip 54 protection. pwd ele csr 2022-2023 pg no 220 12-4-20, item no.8 supplying & erecting automatic control panel for 3 phase , 415 volt, a.c, submersible/centrifugal pump set up to 7.5 hp consisting of dol starter having relay range 9-14 amp,s.p.p., combined ammeter/ voltmeter, phase indicating lamp enclosed in crca powder coated vibration proof enclosure with ip 54 protection. control panel should offer single phasing, phase reversal, phase imbalance etc .pwd ele csr 2022-2023 pg no 204 12-4-17, item no. 9 supplying and erecting d.o.l. starter 400v. 3 phase, 50cycles with no volt coil and overload element with necessarymaterials and connected to supply for 10 h.p., item no 10 supplying & erecting flat flexible 3 core 2.5 sq.mm pvc sheathed submersible type copper cable suitably clamped at fixed intervals with column pipe assembly complete.pwd ele csr 2022-2023 pg no 220 12-4-8, item no. 11 supplying, erecting & terminatin

CTN :45686669

08 Jul, 2026 7.25 Lacs

Pathanamthitta - Kerala

Tender For supply of one no 40 hp motor pumpset and accessories for alapazhanji bhagam li scheme in pandalam muncipality under mi division pathanamthitta - a horizontal split casing centrifugal pump with c.i. impeller and standard fittings capable of discharging 120 lps water against a total head of 12 mtrs with minimum efficiency 75% npshr less than 3m coupled to an electric motor, 40hp, tefc, squirrel cage induction type max 1500 rpm working on 415 volt, 3 phase, 50 hz, ac supply continuous rating with class f insulation confirming to 1s 12615:2018 with following accessories like base plate, mounting bolt with nut, foundation bolt with nut, coupling, coupling bolt with nut and coupling guard etc., from the original manufacturer.. including gst, supply of fully automatic star delta starter for the above 40 hp squirrel cage induction motor. including gst, supply of vacuum pump set 3 hp, 3 phase, with common base plate, foundation bolt and nut with dol starter. including gst