Latest machine tools scrap Tenders | Government machine tools scrap Tenders

Central Government And Public Sector

CTN :41542250

12 Sep, 2025 NA

Hyderabad-T - Telangana

Tender For supply of condenser blade , 4 mfd capacitor , samsung timer , white wrapping tape , teflon tapes , cello tape 2 black , cotton waste , danfoss relay set 20 deep freezer , 80 by 100 mfd capacitor , minus 20 deep freezer square type , pin remover charging , thermostat minus20 , relay danfoss , capacitor 4 mfd , condenser fan blade for 2 ton llyod ac , pinch pliers , t handle 10inch , t handle 12inch , sand paper , 1 by 4inch ratchet , refrigerant recovery plier , allen key set in inches , cold room evaporator fans , 8 mfd capacitor , nose pliers , wire cutter , charging line r32 , two way manifold gauge with box and hose , 46 pcs set , cylinder key , tourch for butane gas cylinder , swaging tools , rough file with handle , double end spanner set 6x32 mm , t set 13inch , t set 14inch , drain line spring , single gauge high side , measuring tape 5 meters , expansion valve for cold room , condenser motor , capacitor 3 mfd , digital temp meter , samsung heater , timer , condenser fan blade , valve 3by8inch hand shut off , cylinder valves , condenser motor , fan blade , hand cutter blade iron , adjustable wrench 6inch , adjustable wrench 8inch , adjustable wrench 12inch , allenkey set mm , flaring tools set with box , smooth file with handle , r22 charging line , t handle only 1by4inch , multitec screw driver , t handle 8inch , t handle 11inch , t handle 13inch , tube cutter , flare nut 3by4inch , square type condenser fan motor , tong tester with probes and leather cover , screw driver long , hammer with wooden handle , cutting plier , tube cutter small , hexa frame with blade , evaporator fan motor for lg refrigerator , condenser copper coil make llyod , filter , single pressure gauge high side500psi , gauge value , danfos 20 relay olp set , try square set , valve core removal tool , digital vernier callipers with batteries , siron soldering iron set , soldering wire , ) /bid number : gem/2025/b/6597172 * /dated: 22-08-2025 & & / bid document 1 / 87 & & ' ' /item category compressor cable kit , handset valve 1by4inch , cuppler , 24 socket wrench set ratchet , pin valve , charging line handle , capacitor 50 mfd , 3 way 30 amps connector , ss tank nipple 1by2inch , pvc connection pipe 1 by 2 inch , ro water purifier t type tap , ro water purifier tap tank kent type , charging line rubber , pipe wrench 16inch , bearings , oil seal , ss breazing roads , bluestar indoor blower for 1point5 ton sac , line tester , screwdriver small , screwdriver large , handle t , jet pump handle small , araldite 500gms , double ended ring spanner set , single guage low pressure for vaccume , t type handle spanner set , continuity tester compressor check , servicing covers , compressor for 345 liters refrigerator , electrical relay , compressor for minus20 deep freezer 320 liters , compressor for 165 liters bpl make refrigerator , compressor for minus20 deep freezer 350 liters , filter drier pencil type , compressor for -20 deep freezer 500 liters , compressor for 1point5 tr split ac rotary type , side dummy nuts 5by8inch , side dummy nuts 1by2inch , side dummy nuts 1by4inch , side dummy nuts 3by8inch , dummy nuts 1by4inch , ductable split ac indoor blower , rubber bushes , minus20 deep freezer compressor , drier cum filter , refrigerant r 600a , hand shut valve for r600a portable cylinder , water pipe pvc , acetylene cylinder regulator , oxygen cylinder regulator , hose pipe for acetylene , hose pipe for oxygen , torch for oxygen acetylene cylinder , clamps for hose pipes , hand hacksaw bladed , axial fan motor for hitachi 16point5 ton ac , compressor for ice machine 120 kg per hr production , filter cum drier , compressor for bluestar split ac 1point5 ton , capacitor 45 mfd , capillary tube gauge , soldering liquid flux , blower for lloyd make split ac 1point5 ton , pvc pipe 3by4inch , pvc bends 3by4inch , pvc pipe 1inch , pvc bend 1inch , clamps 3by4inch , clamps 1inch , pvc t joint 3by4inch , pvc solvent , cutting machine blade , vc t

Central Government And Public Sector

CTN :41503645

10 Sep, 2025 NA

Lumding - Assam

Tender For supply of supply installation and commissioning of safety sling as per item 1 of attached specification document , supply installation and fixing of safety sling for power car as per item 2 of attached specification document , 150 sqmm feeder cable as per item 3 of attached specification document , 6 sqmm e beam copper cable as per item 4 of attached specification document , heavy duty copper crimping socket as per item 5 of attached specification document , double ended jumper plug assembly as per item 6 of attached specification document , 120 sqmm thin walled flexible elastomeric cable as per item 7 of attached specification document , 120 sqmm thin walled flexible elastomeric cable with copper conductors as per item 8 of attached specification document , hand opertaed hydraulic crimping tool as per item 9 of atached specification document

CTN :41137456

01 Sep, 2025 2.20 Crore

Hooghly - West Bengal

Tender For corrigendum : biennial maintenance contract of ahp mech maint btps - mandatory job amc ahpmm, wages: lobour cost without ppe (please enter basic rate in rs.725981.84 for this item. ), ppe-liveries, consumables, tools&tackles and profit & overhead, wc & gpa insurance, odd hours duty, optional job amc ahpmm, optional job part-ireplacement of the ash slurry pipe line at critical position inside/outside plant including soil/ash excavation,jungle cutting,dewatering,conveniance,diesel generator( where electricity is not available etc.), optional job part-iiash pond change over(ash pond-1to2 or ash pond -2 to1) including convenience,tool tackles etc.

CTN :41318987

01 Sep, 2025 5.00 Crore

Jodhpur - Rajasthan

Tender For corrigendum : various laboratory items of m.m.n.n.j.y - paraffin wax 60-62 c with ceresin , no of qty.(1 kg.), absolute alcohol(ethanol), no of qty.(500 ml), distilled water , no of qty.(5 lit.), xylene, no of qty.(500 ml), spirit, no of qty.(10 liter ), cotton roll (item related to schedule-1 as per rtpp rules 2013, priority will be given to msme sector hence enclose msme certificate ), no of qty.(500gm), micro slides 75x23 mm thicknesss-1.25 to 1.5 mm(glass) , no of qty.(1 pkt.x50 slides), chloral hydrate , no of qty.(500 gm.), amonia solution , no of qty.(500ml), formaldehyde solution 40%, no of qty.(5 lit.), white adhesive tape , no of qty.(1 pkt.), microtome disposable blade high profile., no of qty.(1 pkt. (50 blades each)), filter paper round 100x1 pkt, no of qty.(1 pkt.), cassettes 3 cm.x2.5cm. (plastic) yellow, no of qty.(500 in no), cassettes 3 cm.x2.5cm. (plastic) white, no of qty.(500 in no), latex gloves sterilized 6.5/7.0/7.5 no., no of qty.(1 pair), latex gloves unsterilized 6.5/7.0/7.5 no., no of qty.(1 pair), dextrose, no of qty.(500 gm.), albumin powder, no of qty.(500 gm.), leishman stain, no of qty.(500 ml), sulphur powder, no of qty.(500 gm.), sodium acetate, no of qty.(500 gm.), potassium acetate, no of qty.(500 gm.), potassium nitrate, no of qty.(500 gm.), benedicts solution , no of qty.(5 lit.), acetone, no of qty.(500ml.), dpx solution, no of qty.(250 ml), cover slip 18x18 0.1 mm english glass, no of qty.(1 pack of 50), cover slip 22x22 0.1 mm english glass, no of qty.(1 pack of 50), cover slip 22x50 0.1 mm english glass, no of qty.(1 pack of 50), glycerine, no of qty.(500 ml), di ionized water, no of qty.(10 lit.), schiffs reagent, no of qty.(500 ml), bee s wax, no of qty.(1 kg.), cea (primary antibodies), no of qty.(7 ml), gfap (primary antibodies), no of qty.(7 ml), hmb 45 (primary antibodies), no of qty.(7 ml), desmin (primary antibodies), no of qty.(7 ml), ema (primary antibodies), no of qty.(7 ml), bcl2 (primary antibodies), no of qty.(7 ml), hmwck (primary antibodies), no of qty.(7 ml), ck7 (primary antibodies), no of qty.(7 ml), er (primary antibodies), no of qty.(7 ml), cd30 (primary antibodies), no of qty.(7 ml), cd5 (primary antibodies), no of qty.(7 ml), cd23 (primary antibodies), no of qty.(7 ml), ck20 (primary antibodies), no of qty.(7 ml), ki67 (primary antibodies), no of qty.(7 ml), cd10 (primary antibodies), no of qty.(7 ml), synaptophysin (primary antibodies), no of qty.(7 ml), pr (primary antibodies), no of qty.(7 ml), mpo (primary antibodies), no of qty.(7 ml), pax-5 (primary antibodies), no of qty.(7 ml), cd3 (primary antibodies), no of qty.(7 ml), wt1 (primary antibodies), no of qty.(7 ml), s100 (primary antibodies), no of qty.(7 ml), aei/ae3 (multi ck) (primary antibodies), no of qty.(7 ml), sma (primary antibodies), no of qty.(7 ml), inhibin (primary antibodies), no of qty.(7 ml), hpv (primary antibodies), no of qty.(7 ml), p16 (primary antibodies), no of qty.(7 ml), eber (primary antibodies), no of qty.(7 ml), lmp1 (primary antibodies), no of qty.(7 ml), c4d (primary antibodies), no of qty.(7 ml), amyloid (primary antibodies), no of qty.(7 ml), her 2 neu (primary antibodies), no of qty.(7 ml), vimentin (primary antibodies), no of qty.(7 ml), chromogramin (primary antibodies), no of qty.(7 ml), antigens retrival buffer diva decloaker 20x (for manual ihc staining), no of qty.(250 ml), background snipper (for manual ihc staining), no of qty.(25 ml), wash buffer tbs autowash buffer 40x (for manual ihc staining), no of qty.(250 ml), hrp polymer detection kit (for manual ihc staining), no of qty.(25 ml), polylysine coated slides (for manual ihc staining), no of qty.(1 x 50), peroxidaxed block 1 (for manual ihc staining), no of qty.(500 ml), betazoid dab chromogen (for manual ihc staining), no of qty.(2 ml), betazoid dab substrate buffer (for manual ihc staining), no of qty.(25 ml), cryomatrix (optimal cooling tool gel coolent)(for cryostate), no of qty.(1 x 120 ml), sarasil disinfect

Central Government/Public Sector

CTN :41413541

22 Aug, 2025 NA

Etawah - Uttar Pradesh

Tender For tender for supply of fixed asset item - ornament testing and detector , islolation transformer , electric ups , monitor (display unit) , accessories (ring holder , scrather tool , mouse , key board , etc)

Central Government/Public Sector

CTN :41391374

30 Aug, 2025 NA

Bangalore - Karnataka

Tender For supply of item# 1 mfg & supply of radial stator / radial stator / s/c for supply of investment casting for p , item# 2.714731- fdi-5541-tl tool for radial stator

CTN :41241395

19 Aug, 2025 NA

Sultanpur - Uttar Pradesh

Tender For corrigendum : supply of plug gauge as per drg no. tend/63/gauge/1 (item code - 4200400083) , gauge as per drg no. tend/63/gauge/2 (item code - 4200400084) , gauge assembly drawing as per drg no. tend/63/gauge/3 (item code - 4200400085) , gauge assembly drawing as per drg no. tend/63/gauge/4 (item code - 4200400086) , reference gauge assembly drawing as per drg no. tend/63/gauge/5 (item code - 4200400087) , reference gauge assembly drawing as per drg no. tend/63/gauge/6 (item code - 4200400088) , gauge as per drg no. tend/63/gauge/7 (item code - 4200400089) , ring as per drg no. tend/63/gauge/8 (item code - 4200400090) , plug gauge assembly drawing as per drg no. tend/63/gauge/9 (item code - 4200400091) , gauge assembly drawing as per drg no. tend/63/gauge/10 (item code - 4200400092) , gauge assembly drawing as per drg no. tend/63/gauge/11 (item code - 4200400093) , height gauge as per drg no. tend/63/gauge/12 (item code - 4200400094) , height gauge as per drg no. tend/63/gauge/13 (item code - 4200400095) , gauge as per drg no. tend/63/gauge/14 (item code - 4200400096) , gauge insert assembly drawing as per drg no. tend/63/gauge/15 (item code - 4200400097) , gauge assembly drawing as per drg no. tend/63/gauge/16 (item code - 4200400098) , gauge as per drg no. tend/63/gauge/17 (item code - 4200400099) , gauge assembly drawing as per drg no. tend/63/gauge/18 (item code - 4200400100) , gauge assembly drawing as per drg no. tend/63/gauge/19 (item code - 4200400101) , gauge assembly drawing as per drg no. tend/63/gauge/20 (item code - 4200400102) , gauge assembly drawing as per drg no. tend/63/gauge/22 (item code - 4200400103) , gauge assembly drawing as per drg no. tend/63/gauge/23 (item code - 4200400104) , gauge insert assembly drawing as per drg no. tend/63/gauge/24 (item code - 4200400105) , gauge as per drg no. tend/63/gauge/25 (item code - 4200400106) , rule as per drg no. tend/63/gauge/26 (item code - 4200400107) , master sample assembly drawing as per drg no. tend/63/gauge/27 (item code - 4200400108) , gauge assembly drawing as per drg no. tend/63/gauge/28 (item code - 4200400109) , setup tool assembly drawing as per drg no. tend/63/gauge/29 (item code - 4200400110)

Central Government And Public Sector

CTN :40427886

13 Aug, 2025 NA

Angul - Odisha

Tender For bid to ras supply of fabricated spares for rodding shops pr 1000070513 - mobile mast, pre-breaking tool of bath breaking machine of rs-1. as per item i of dwg. rs-i/mech/ga/a2/11376, sh-1/2, rev.-1 , mobile mast, breaking tool of bath breaking machine of rs-1, as per item 2 of dwg: rs-/mech/ga/a2/11376, sh-1/2, rev.-1 , mobile mast top plate, pre-breaking tool of bath breaking machine of rs-1, as per item 3 of dwg: rs-1/mech/ga/a2/11376, sh-2/2 , mobile mast top plate, breaking tool of bath breaking machine of rs-1, as per item 4 of dwg: rs-l/mech/ga/a2/11376, sh-2/2 , rod handling cylinder clevis of thimble press as per item 1a of dwg. rs-i/mech/spr/a2/11508, rev.-1 , pin for rod handling cylinder clevis of thimble press as per item ib of dwg. rs-/mech/spr/a2/11508, rev.-1 , bush for rod handling cylinder clevis of thimble press as per item of ic dwg. rs-/mech/spr/a2/11508, rev.-1 , jaw cylinder clevis of thimble press as per item 2a of dwg. rs-/mech/spr/a2/11508, rev.-1 , jaw cylinder clevis pin of thimble press as per item 2b of dwg. rs-i/mech/spr/a2/11508, rev.-1 , end plate of thimble press as per item 2c of dwg. rs-i/mech/spr/a2/11508, rev.-1 , jaw axle for thimble press as per item 3 of dwg. rs-i/mech/spr/a2/11508, rev-1 , axle for rod handling roller of thimble press as per item 4 dwg. rs-/mech/spr/a2/11508 rev-1

Central Government And Public Sector

CTN :41129004

16 Aug, 2025 NA

Kudankulam - Tamil Nadu

Tender For supply of foreign material exclusion tools e e - supply and delivery of tool belt as per item no.1 of attached technical specification , supply and delivery of wrist band as per item no.2 of attached technical specification , supply and delivery of helmet support tether as per item no.3 of attached technical specification , supply and delivery of neck lanyard with pen holder retention sliders as per item no.4 of attached technical specification , supply and delivery of tools lanyard as per item no.5 of attached technical specification , supply and delivery of fme-foreign material exclusion zone barricade tapeas per item no.6 of attached technical specification , supply and delivery of fme- foreign material exclusion covers for covering the dismantled motor as per item no.7 of attached technical specification , supply and delivery of tool collar attachment points with fit diameter 0.094 inch to 0.13inch as per item no.8 of attached technical specification , supply and delivery of tool collar attachment points with fit diameter 0.16 inch to 0.20 inch as per item no.9 of attached technical specification , supply and delivery of tool collar attachment points with fit diameter 0.20 inch to 0.26 inch as per item no.10 of attached technical specification , supply and delivery of tool collar attachment points with fit diameter 0.26 inch to 0.30 inchas per item no.11 of attached technical specification , supply and delivery of tool collar attachment points with fit diameter 0.34 inch to 0.40 inch as per item no.12 of attached technical specification , supply and delivery of tool collar attachment points with fit diameter 0.60 inch to 0.72 inch as per item no.13 of attached technical specification

Central Government/Public Sector

CTN :41362754

18 Aug, 2025 NA

Bhopal - Madhya Pradesh

Tender For supply of n set of items consisting of item no. 1, 2, 3 & 4 of the attached drawing no. 3sp14013927 for collate (draw bolt) for tool holdingssembly of horizontal milling machine # 5/a/2050. tool details are as per the drawing

Machine Tools Scrap Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government And Public Sector

Central Government And Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government And Public Sector

Central Government And Public Sector

Central Government/Public Sector