Latest machine tools Tenders | Government machine tools Tenders

Central Government/Public Sector

CTN :40032020

08 May, 2025 2.28 Crore

Kanpur - Uttar Pradesh

Tender For providing of custom bid for services - outsourcing of mechanized coach cleaning attention of memu rakes at memu car shed kanpur for 03 years sch a cost of manpower for mechanized coach cleaning,custom bid for services - sch b cost of machines tools chemicals unforms and other consumables

CTN :39762977

30 Apr, 2025 NA

Bangalore - Karnataka

Tender For corrigendum : providing of customized amc/cmc for pre-owned products - swing type band saw machine; multicut machine tools; annual maintenance contract (amc); six-monthly; no

Central Government/Public Sector

CTN :40010421

09 May, 2025 NA

Jhansi - Uttar Pradesh

Tender For jhansi division -bsz-gtm- ctr (p) - 36.51 tkm & jhansi division -gtm-bzm ctr (p) - 32.23 tkm-ns item :- a) running track site:- replacement of old sleepers and rails (ctr) by dismantling existing track of all types of sleepers by making 13m loose rail panel (or any suitable length panel) with existing sleepers & sh rail (for removing existing track) with wider base sleepers/revised wider base sleepers at density of 1660 sleepers per km assembled with loose rail panel (or any suitable rail length panel of sh rail) in pqrs depot and placing over ballast properly during traffic block after removing panels of old sleeper and sh rail of 13 m loose rail panel (or any suitable length panel) wth the use of contractor's pqrs machine by providing auxilary track with gauge of 3400mm (either with the use of existing rail from existing track or with new rail unloaded by contractor from eur in block as instructed by sse/p-way, (if required) over metal/ wooden sleepers, to be provided by railway, 500 nos./rail km on both rails at the interval of 2m) and providing fish plates for joining loose sh rail over wider base sleeper for continuity of track and maintaining track parameters as per para 522 of irpwm 2020 to keep the track fit for 30kmph. sh rail over new wider base sleepers/revised wider base sleepers to be replaced with newlearlier existing rail on running track (with replacement of rutbber pad, liner & greased erc and greasing of liner contract area. grease to be used should be of 'o' graphite grease as per s code 408). as soon as loose rail length of track reaches 500m/750nm (as per decision of railway site engineer ie. sseje/ p-way), loading of track panel (sh rail over old normal sleeper and tied with erc) of approximately 13 m length over railway wagons and unloading of track panels of the length of 13 m (or any suitable length) and wider base sleepers/revised wider base sleepers will be done during traffic block. trr with the rail of the length of 250 m to 500m (preferably 20rail panel) will have to be done as soon as track of loose rail exceeds 500m length. further the contractor wil follow instructions of sse/p-way to relax speed of track upto maximum speed of section as per schedule laid down in irpwm 2020 para 708 for machine tamping with all machine packing related works such as recoupment of crib ballast, shoulder ballast, boxing and dressing. the whole process wil continue ill completion of work. auxilary track (at) will have to be removed with advancement of ctr work as per direction of railway (sse/jeip-way). b) pqrs depot: track panel with sh rail of 13 m or any suitable length over wider base sleepers/revised wider base sleepers/revised wider base sleepers will be made with necessary fittings in pqrs depot. loading of these panels over railway wagons and unloading of released track panels (released from running track) consisting of all types of rails & sleepers from railway wagon at pqrs depot using contractor's own portal crane including dismantling and stacking each component of track properly at designated locations. (note: this item of complete track renewal with wider base sleeper is a composite item and all activities as required will have to be done by the contractor with his/her own pqrs machine & other machines, tools and plants including all other resources as per requirement of the work (in pqrs depot and during traffic block in running tack). ralway will provide wagons and locomotives free of cost for loading/unloading and transportation tofrom pors depot/work site (running track) for loose rail panels with normal old sleepers and with wider base sleepers/revised wider base sleepers. nothing extra will be paid except the rates as mentioned against the item. raiway will also provide metal/wooden sleepers required for at, free of cost. various activities which are involved in ctr work are elaborated in "sequence of activities provided with tender schedule." (unit- per track km.).

Central Government/Public Sector

CTN :39952633

18 Apr, 2025 NA

Bengaluru - Karnataka

Tender For rate contract for supply of machine tools for a period of 02 years as per rfq. - machine tools, aa6112100010heavy duty bench vice fixed base, cn6841509021drill chuck (keyless-s13), ed6287310979inserts for cnc face mill ( 50,80,100)mm, ed6287310987insert.cnc sholdr. face mill cutter 63, ed6314000297abrasive buffing wheel 100(grit 120), ed6314000300abrasive cutting wheel for ss 105mm, ed6418999053zirkon coat.abrasive disc.100mm-36 grit, ed6418999061zirkon coat.abrasive disc.100mm- 60grit, ed6418999072zirkon coat.abrasive disc.125mm- 36 grit, ed6817010985cnc indexbale drill 17.5 mm, ed6817010993inserts for 17.5 cnc index.drill, ed6817011001cnc finish milling cutter 100, ed6881402257insert for cnc finish mill 100

CTN :39902006

05 May, 2025 NA

Amravati - Maharashtra

Tender For corrigendum : request for proposal for establishment of internet of things (iot) lab at 3 maharashtra international centres (mics) in maharashtra - capex:design, procure, install, commission machines, tools and equipment for establishment of iot labs as per the boq mentioned in annexure ix a and ix b for:, 1. location: amaravati, 2. location: mumbai, 3. location: nagpur, opex, operational expenditure should include following components but not limited to :1. instructors remuneration for 3 years2. consumables (stationary, instructional materials, etc.)3. raw materials for practical training in iot lab4. maintenance of inventory5. course administration costs, if any6. housekeeping and allied costs towards maintenance of labs7. cost of insurance for manpower, machinery and equipment deployed by the bidder for a period of 3 years8. any other incidental expenses

CTN :39902034

05 May, 2025 NA

Amravati - Maharashtra

Tender For corrigendum : request for proposal for establishment of industrial robotics (ir) lab at 3 maharashtra international centre in maharashtra - capex:design, procure, install, commission machines, tools and equipment for establishment of industrial robotics (ir) labs as per the boq mentioned in annexure ix a and ix b for:, 1. location: amaravati, 2. location: mumbai, 3. location: nagpur, opex, operational expenditure should include following components but not limited to :1. instructors remuneration for 3 years2. consumables (stationary, instructional materials, etc.)3. raw materials for practical training in ir lab4. maintenance of inventory5. course administration costs, if any6. housekeeping and allied costs towards maintenance of labs7. cost of insurance for manpower, machinery and equipment deployed by the bidder for a period of 3 years8. any other incidental expenses

State Government

CTN :37452753

17 Apr, 2025 24.00 Lacs

Kalyan - Maharashtra

Tender For corrigendum : supply of machine tools for kalyan circle i : chain block 2 mt , chain block 5 mt,crimping tool for all type of lugs ,cum along clamp,dieless crimping tool (6sq.mm to300sqmm) ,frp ladder 5/6 meter,single sheave al. roller ,turfur 3 ton ( pulling cum liftingmachine)

CTN :39716353

14 Apr, 2025 12.00 Lacs

Jhargram - West Bengal

Tender For notice inviting e-tender for procurement of equipment, instrument, machineries, tools etc. related to laboratories and workshops of civil engineering department of iswar chandra vidyasagar polytechnic, sevayatan, jhargram, west bengal.

Central Government/Public Sector

CTN :39315379

16 Apr, 2025 NA

Multi City - Multi State

Tender For corrigendum : examination testing & certification of lifting machines, tools and tackles etc in visl

CTN :39038234

21 Apr, 2025 13.98 Crore

Gandhinagar - Gujarat

Tender For corrigendum : supply of goods, tools & equipmentforan international standard itotin operator advanced machine tools (oamt) tradeat iti suart, gujarat, india (package 4: oamt trade) - surface grinding machine , cnc machining centre , cnc milling tools for above machine , cnc turn centre , edm , cnc simulator , vertical-spindle five-axis machining centres , cnc tool pre setter , ss and sc centre lathe (all geared) with having minimum specification , universal milling machine with minimum specification , horizontal milling machine with minimum specification , vertical milling machine , universal tool and cutter grinding machine , cnc lathe machine , tool holders to suit the cnc turn centre , jig boring , gear hubber , gear shaper machine , power saw machine-hydraulic feed system , cylindrical grinder , power saw machine , pedestal grinder double end type. , radial drill motorized with tapping attachment , drilling machine pillar type with drill chuck & key. , slotter , double column planer , shaping machine , shaping machine , co-ordinate measuring machine , cnc wire cut edm (electrical discharge machining) , special tools and equipment , involutes gear module , surface plate , marking table , scribing block universal , v-block , combination set , spanner double ended metric , adjustable spanner , reduction sleeve morse taper , angle plate adjustable , oil stone , number drill h.s.s(parallel shank) , drill (parallel shank) , twist drills , drill chuck , centre drill , grinding wheel dresser(diamond) , grinding wheel dresser hunting type , c- clamp , c-clamp , tap & die set inbox metric pitch , reamer , reamer adjustable , machine vice , machine vice , machine vice , universal machine vice , universal table angle plate , taper shank twist drill set , shaper tool holder turret type , knurling tools (set of 3) straight and diamond , carbide tipped tools of different sizes and shapes (through away tips) , micrometer outside , micrometer outside , micrometer outside , digital micrometer outside , digital micrometer outside , digital micrometer outside , digital vernier calliper , micrometer depth gauge , dial vernier calliper , vernier height gauge , vernier bevel protractor with blade , bevel gauge , telescopic gauge , sine bar , inside micrometer , inside micrometer , dial test indicator , slip gauge set (normal set) metric , plug gauges , ring gauges , snap gauge , vernier caliper , cylindrical cutter , cylindrical cutter , side and face cutter , side and face cutter , side and face cutter , side and face cutter , equal angle cutter , equal angle cutter , equal angle cutter , t" slot , t" slot cutter , t" slot cutter , t" slot cutter , single angle cutter , single angle cutter , single angle cutter , single angle cutter , double unequal angular cutter , double unequal angular cutter , end mill cutter , concave cutter , convex cutter , corner rounding cutter , corner rounding cutter , slotting cutter , slotting cutter , slitting saw cutter , slitting saw cutter , slitting saw cutter , dove tail milling cutter parallel shank , dove tail milling cutter parallel shank , dove tail milling cutter parallel shank , dove tail milling cutter parallel shank , shell & end mill cutter , shell &end mill cutter , face mill cutter with inserted tip , face mill cutter with inserted tip , face mill cutter with inserted tip , involutes gear module , air conditioner split , dg set , air conditioner , wall charts, transparencies and dvds , air conditioner , steel rule , divider , centre punch , hammer ball pane , combination plier , file flat bastard , file flat 2nd cut , engineers screwdriver , file flat smooth , cold chisel flat , try square , straight edge steel , steel tape , soft hammer , sprit level , hammer ball pein , screwdriver, heavy duty , hammer lead , screwdriver , allen hexagonal keys , angle plate , solid parallel sine pair (different size) in metric , oil can pressure feed , file flat 2nd cut , file flat smooth , fi

Machine Tools Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

State Government

Central Government/Public Sector