Latest machine washer Tenders | Government machine washer Tenders

CTN :45519402

22 Jun, 2026 2.06 Lacs

Kottayam - Kerala

Tender For material list (m c f)thaluk hospital estimate 1&2. - stone aggregate 20 mm, stone aggregate10mm, coarse sand, cement, gi pipe, gi pie, red oxide zink cromate primer, welding eletric plant, g i wire mesh, wire nails, expoxy paint, g i traffold sheet0.35mm thick, bitumen washer, stainless steel srews 50mm

State Government

CTN :45475453

10 Jun, 2026 3.00 Lacs

Kota - Rajasthan

Tender For supply of sanitary and joinery items to government quarters located in civil lines. - wire nails, coarse sand (zone iii), fine sand (zone iv), portland cement, oxidised mild steel butt hinges 125x65x2.12 mm, oxidised mild steel butt hinges 100x58x1.90 mm, oxidised mild steel butt hinges75x47x1.70 mm, chromium plated brass handles 125 mm with plate 175 x32 mm, chromium plated brass handles 100 mm with plate 150 x 32 mm, stainless steel butt hinges 125x64x1.9 mm is : 12817 marked, stainless steel butt hinges 100x58x1.9 mm is : 12817 marked, stainless steel butt hinges 75x47x1.8 mm is : 12817 marked, stainless steel butt hinges 50x37x1.5 mm is : 12817 marked, oxidised mild steel tower bolt (barrel type) 150x10 mm, oxidised mild steel door latch 300x20x6 mm, oxidised mild steel door latch 250x20x6 mm, oxidised mild steel screws 50 mm, oxidised mild steel screws 40 mm, oxidised mild steel screws 30 mm, oxidised mild steel screws 25 mm, oxidised mild steel screws 20 mm, glue, ms hold fast, white cement based putty, g.i. limpet washer, bitumen washer, g.i. plain washer thick, c.i. grating 100x100 mm, indian type white glazed vitreous china ist quality w.c. orissa pan size 580x440mm., brackets, low level flushing cistern of 10 litres capacity : pvc with pvc bend as per is : 7231, m.s. clamps, european type white glazed vitreous china ist quality w.c. pan, wvc (10 litres) low level flushing cistern cover only., g.i. tees (equal) 25 mm, g.i. union 15 mm nominal bore, vitreous china flat back wash basin size 510 mm x 440 mm, c.p. brass waste coupling 32 mm, magenatic catcher double strip horizontal type., mortice lock of approved make godrej or equivalent with pair of cp handles, almirah lock of approved make godrej or equivalent, ss waste coupling 125 mm, p.v.c waste pipe with c.p nut 32 mm, p.v.c waste pipe with pvc nut 32 mm, float glass sheet of nominal thickness 4 mm (weight not less than 10kg/sqm)., hydraulic door closer bottle type m.s. body with necessary accessories and screws complete, 6 mm thick commercial ply, 9 mm thick commercial ply, semi rigid pvc waste pipe for sink and wash basin 32 mm dia with length not less than 700 mm i/c pvc waste fittings, flexible (coil shaped) pvc waste pipe for sink and wash basin 32 mm dia with length not less than 700 mm i/c pvc waste fittings, u-pvc pipes (working pressure 4 kg / cm^2) single socketed pipe 75 mm dia., u-pvc pipes (working pressure 4 kg / cm^2) single socketed pipe 110 mm dia., upvc coupler for upvc drainage pipes 75 mm, upvc coupler for upvc drainage pipes 110 mm, upvc bend 87.5o 75 mm bend, upvc bend 87.5o 110 mm bend, upvc plain shoe 75 mm bend, upvc plain shoe 110 mm bend, upvc pipe clip 75 mm bend, upvc pipe clip 110 mm bend, c.p. brass bibcock 15 mm, c.p. brass long body bibcock 15 mm, c.p. brass angle valve 15 mm, 15 mm ptmt bib cock, p.t.m.t. bib cock with nozzle 15mm, 15 mm ptmt bib cock long body with flange, 15 mm dia ptmt stop cock (male thread), ptmt pillar cock, ptmt ball cock 15mm complete with epoxy coated aluminium road & h.d. ball, ist qulality mat and glossy finished ceramic tiles size : 300mm x 450mm, ist quality heavy duty vitrified polished digital tile size:600mmx600 mm, ceramic mat finished tiles ist quality size 300 mm x 300 mm in white, gray, ivory, fume red brown, light green, light blue and other light shades, 15 mm nominal bore and 30 cm length pvc connection pipe with p.t.m.t. nuts, 15 mm nominal bore and 45 cm length pvc connection pipe with p.t.m.t. nuts, stainless steel screws 50 mm, stainless steel screws 40 mm, stainless steel screws 30 mm, stainless steel screws 20 mm, premium quality water closet seat cover solid pvc (isi marked) grade-i white for ewc, premium quality low level flushing cistern of 10 litres capacity pvc with pvc bend as per is : 7231, hydraulic seat cover for europeon wc, premium quality two way bib cock with wall flange, tooth paste & brush holder c.p. brass (heavy and superior quality.), stainless steel kitchen s

State Government

CTN :45478262

13 Jun, 2026 NA

Birbhum - West Bengal

Tender For fixation of local market rate(including gst and cess) for implementation of different scheme under mgnrega at khoyrasole dev. block and 10 nos of gp under khoyrasole dev. block for the year 2026-27 - mgnrega materials, hire charges of concrete mixer 0.25 to 0.40 cum with hopper, hire charges of diesel road roller- 8 to 10 tonne, hire charges of pump set of capacity 4000 litres/hour, vibrator (needle type 40 mm), surface vibrator, water tanker 5000 ltr. capacity, seam bolts and nuts 6 mm dia and 25 mm long, brick aggregate (single size):50 mm nominal size, brick aggregate (single size):40 mm nominal size, stone aggregate(single size):63 mm nominal size, stone aggregate(single size): 40 mm nominal size, stone aggregate(single size):20 mm nominal size, stone aggregate(single size): 10 mm nominal size, stone aggregate(single size): 06 mm nominal size, brick bats, portland cement, white cement, coal (steam), brass 150 mm floor door stopper (0.357 kg), chromium plated brass mortice latch and lock 100x65 mm with 6 levers and a pair of brass lever, glue, unslaked lime, synthetic enamel paint, having voc ( volatile organic compound content less than 150 gm/liitre, ready mixed pink or grey primer on wood work(hard and softwood) having voc content less litrethan 50 gms/litre, water thinnable cement primer for interior wall surface, having voc content less than 50 litre gms/litre, moorum, black japan, synthetic enamel paint in black or chocolate shade, superior copal varnish, green or blue medium shade pigment, rolling shutter made of 80x1.25 mm machine rolled laths, galvanised steel plain sheets, galvanised steel bolts & nuts 6 mm dia and 25 mm long round head with slots, galvanised steel j or l hooks 8 mm dia, stone dust, g.i limpet washer, bitumen washer, g.i. plain washer for seam bolts, wire mesh (rabbit), diesel oil, mirror of superior make glass 60x45 cm, vitreous china pedestal for wash basin, g.i. pipes 15 mm dia, g.i. pipes 20 mm dia, g.i. pipes 25 mm dia, g.i. pipes 32 mm dia, g.i. pipes 40 mm dia, g.i pipes 50 mm dia, g.i. pipes 65 mm dia, g.i. pipes 80 mm dia, r.c.c. pipes np2 class 250 mm dia, r.c.c. pipes np2 class 300 mm dia, r.c.c. pipes np2 class 450 mm dia, r.c.c. pipes np2 class 600 mm dia, r.c.c. pipes np2 class 900 mm dia metre, r.c.c. pipes np2 class 1000 mm dia, white plastic seat (solid) with lid c.p. brass hinges and rubber buffers, shower rose c.p brass for 15 to 20 mm intel 100 mm dia, vitreous china squatting plate urinal, h.p. or l.p. ball valve with polythene floats: 15 mm dia, h.p. or l.p. ball valve with polythene floats: 20 mm dia, h.p. or l.p. ball valve with polythene floats: 25 mm dia, brass full way valve with c.i. wheel (screwed end) 25 mm dia, vitreous china flat back wash basin 630x450 mm, vitreous china angle back wash basin 400x400 mm, vitreous china foot rests 250x125x25 mm, float glass sheet of nominal thickness 4 mm (weight not less than 10 kg/sqm), float glass sheet of nominla thickness 5.5 mm (weight not less than 13.50 kg/ sqm), float glass sheet of nominal thickness 8 mm (weight not less than 20.00 kg/sqm), anodised aluminium hanging type door stopper, galvanised steel corrugated sheets, vitreous china flat back wash basin 550x400 mm, stainless steel bolts /square bar and plates, mild steel tubes hot finished seamless type, red oxide zinc chromate primer, vitreous china flat back wash basin 450x300 mm, hydraulic door closer tubular type aluminium section body each, oxidised m.s. casement stay (straight peg type) 300 mm not less than 0.33 kg, coloured orissa pattern w.c. pan 580x440 mm, coloured pedestal type w.c. pan 580x440 mm (european type), circular shape 450 mm dia precast r.c.c. manhole cover with frame l.d. -25, upvc pipes (working pressure 4 kg /cm2 ) single socketed pipe 75 mm dia, upvc pipes (working pressure 4 kg / cm2 ) single socketed pipe 110 mm dia, upvc single equal tee (without door) 75x75x75 mm, upvc single equal tee (without door) 110x110x110 mm, upvc single equal te

State Government

CTN :45465091

22 Jun, 2026 4.27 Lacs

Multi City - Andhra Pradesh

Tender For procurement of hardware items - hex.head screw cl 8.8 is:1367 asper is:1363 m8 x 20 lg., hex.head screw cl 8.8 is:1367 asper is:1364 m8 x 35, hex.head screw cl 8.8 is:1367 asper is:1363 m10 x 25 lg., hex.head screw cl 8.8 is:1367 asper is:1363 m16 x 40, hex.head screw cl 8.8 is:1367 asper is:1364 m20 x 70, hex.head screw cl 8.8 is:1367 asper is:1363 m20 x 80, hex.head screw cl 8.8 is:1367 asper is:1363 m30 x 90, hex.head screw cl 8.8 is:1367 asper is:1364 m30 x 120, hex socket head cap screw cl 12.9 is:2269 asper is:1367 m6 x 16, hex socket head cap screw cl 12.9 is:2269 asper is:1367 m8 x 25 lg., hex socket head cap screw cl 12.9 is:2269 asper is:1367 m8 x 30, slotted c.s.k screw cl 8.8 is:1367 asper is:1365 m12 x 40 lg., slotted c.s.k screw cl 8.8 is:1367 asper is:1365 m12 x 60, slotted c.s.k screw cl 8.8 is:1367 asper is:1365 m16 x 45, slotted c.s.k screw cl 8.8 is:1367 asper is:1365 m20 x 60, hex head bolt cl 8.8 is:1367asper is:1363 m12 x 40, hex head bolt cl 8.8 is:1367asper is:1363 m12 x 50, hex head bolt cl 8.8is:1367asper is:1363 m16 x 70 lg., hex head bolt cl 8.8 is:1367asper is:1363 m16 x 80, hex head bolt cl 8.8 is:1367asper is:1363 m20 x 50, hex head bolt cl 8.8 is:1367asper is:1364 m20 x 60, hex head bolt cl 8.8 is:1367asper is:1363 m20 x 110, hex head bolt cl 8.8 is:1367asper is:1363 m24 x 75, hex head bolt cl 8.8 is:1367asper is:1363 m24 x 90, hex head bolt cl 8.8 is:1367asper is:1363 m24 x 100, hex head bolt cl 8.8 is:1367asper is:1363 m24 x 110, hex head bolt cl 8.8 is:1367asper is:1363 m24 x 160, hex head bolt cl 8.8 is:1367asper is:1363 m30 x 180, hex head bolt cl 8.8is:1367asper is:1363 m39 x 240 lg., hex head bolt cl 10.9 is:1367asper is:1364 m20 x 70, lock nut std km19, lock nut std km30, hex nut cl 8.0is:1364 as per is:1367 m30., hex nut cl 8.0is:1364 as per is:1367 m36, hex nut cl 8.0is:1364 as per is:1367 m39, hex lock nut cl 8.0is:1364 as per is:1367 m24, hex lock nut cl 8.0is:1364 as per is:1367 m39, split pins is:549 dia 5 x 32, split pins is:549 dia 8 x 45, split pins is:549 dia 8 x 56, machined washer is:2016 m 20, plain washer is - 5370: 1969 m39, spring washer sp.steelis:3063 b12, taper washer for channel is:5372 m 20, taper washer for channel is:5372 m 24, lock washer is:2063-matl-4072 mb 19, lock washer is:2063-matl-4072 mb 30, grease cup is:4672type-c 1/2 inch bsp. 150cm3 -cp150, grease cup is:4672type-c 1/2inch bsp 150cm2-cp90, hex.head screw, hex head bolt, hex nut, hex nut cl 8.0is:1367 as per is:1363 m20, g.i.binding wire

CTN :45261223

29 Jun, 2026 NA

South Andaman - Andaman And Nicobar Islands

Tender For corrigendum : supply of 7900135000 loctite 549 , ek3010b-7903805000 copper washer 8x22x1 5 , ek3010b-7904117000 b s ring c20 60c7 , ek3010b-7904118000 gasket for injector , es6031d-00 mechanical seal , es6031d-1355067 packing perform , es6031d-1355103 packing perform , es6031d-5001012035 stud m12x1 75x35 8 , es6031d- 7248823000 locking plate , es6031d-7248827000 locking , es6031d-7248835000 gasket ring , es6031d- 7248846000 o ring , es6031d-7249022000 hex headed screw , es6031d-7250512000 set of cover joints for heat exhanger , es6031d-74254270000 pin lgcfo2 10x20 , es6031d-7426608000 chc screw m10x50 10 9 class , es6031d-7426744000 joint 65x65x2mm , es6031d-7426901000 fuel feed pump balmo , es6031d- 7432401000 fuel feed pump ccw engine , es6031d- 7442375000 gasket , es6031d-7447269000 flat gasket pn 40 dn65 t 1 5 , es6031d-7448821000 gasket , es6031d-7449306000 gasket , es6031d-7451518 socket screw , es6031d-7452311000 o ring , es6031d- 7452312000 o ring , es6031d-7462668000 gasket , es6031d-7506806000 seal bearing housing , ek3010b- 7248866000 piston ring , ek3010b-7248867000 piston ring , ek3010b-3005105000 zinc rod , ek3010b- 5050145000 circlip 45 x 1 75 , ek3010b-5050821000 copper washer 21 x 27 , ek3010b-5050835000 washer copper , ek3010b-6h715310pr exhaust temprature sensor , es6031d-7448712000 gasket , ek3010b- 7292504000 emergency push button , ek3010b- 7292532000 dc on off switch , ek3010b-7405062000 serrated bush , ek3010b-7448804000 expansion bellow , ek3010b-7531416000 male connector assy d28 g 1 , ek3010b-7903108000 spring , ek3010b- 7903312000 valve rocker bridge with pin , ek3010b- 7910103000 o ring no18 nse6 5 60c7 , ek3010b- ex00600103 mounting base with isolation and test cock , ek3010b-ex02400103 pressure transmitter 40 bar 24v dc 0p 420 , es6031d-43453374 low lub oil sump level switch , es6031d-5050610000 plain machined washer m10 , es6031d-7448990000 set of seal for p2 p4 valve , ek3010b-7426968000 threaded bush fuel feed pump , ek3010b-4h-333-03-0-00 fuel filter cartridge duplex type , ek3010b-7248829000 gasket ring , ek3010b-7907804000 flexible sealing joint , ek3010b-dv0-014-42-0-00 oil filter mann , ek3010b-f6-086-06-0-00 relay board ul , ek3010b- f602440000 relief valve assly , ek3010b-7607154000 terminal box with inbuilt amplifier , ek3010b- 7607182000 bearing , ek3010b-4h33303000 fuel filter cartridge , es6031d-7410341000 air starting pipe , es6031d-7410342000 air starting pipe , es6031d- 7410343000 air starting pipe , es6031d-7410345000 air starting pipe , es6031d-7410346000 air starting pipe , es6031d-7410347000 air starting pipe , es6031d- 7410348000 air starting pipe , es6031d-7597122000 propeller pitch indicator , es6031d-7903107000 spring collar , es6031d-7902620000 cyl liner light fuel assy , es6031d-7531001000 lub oil cooler , es6031d-7597102000 fuse holder , es6031d- 7597108000 fuse cartridge 20a , es6031d-7603480000 screw with expanded tappet , es6031d-7604787000 o ring an69 60c7 , es6031d-7604793000 o ring an53 60c7 , es6031d-7606450000 injector assly , es6031d- 7607193000 o ring , es6031d-7607535000 gasket , es6031d-7607910000 o ring ms 29513 228 60c7 , //bid details 2 / 101 es6031d-7904108000 blind nut , es6031d-7904240000 injector assly for sheathed pipe , es6031d- 7907706000 snap ring , es6031d-7907809000 clamping collar , es6031d-7925520000 pneu saf device on h turn gear , es6031d-ex00300103 pneumatic distributor pneu pneu , es6031d-ex09100103 regulator for fw temp 24vdc i prtd o p 4 20 ma , es6031d-ex10200102 switch 3 pos 1tc auto 2tc , es6031d-ex13000102 electro distributor , es6031d- 7526660000 h t water pump assly bronze , es6031d- 7596351000 horn off push button , es6031d- 7596383000 display pcb , es6031d-7596808000 bulbs 24v dc , es6031d-7597123000 pressure switch 1 bar , es6031d-7597137000 electro distributor , es6031d- 7597169000 filter 7 bar , es6031d-7607178000 gasket , es6031d-7607183000 gasket , es6031d-7607188000 gasket , es6031d-7904107000 lock nut bar , es6031d- ex084

CTN :45478487

18 Jun, 2026 NA

Dimapur - Nagaland

Tender For supply of gi tile roof sheet 0.5mm - 0.6mm thickness width 3.5 ft and length 10 ft green color , l hook with nut and bitumen washer size 8mm dia and 3" x6" , colored ridge sheet 0.70m wide

Central Government/Public Sector

CTN :45471257

03 Jul, 2026 NA

Bhavnagar - Gujarat

Tender For supply of bracket for water filling assembly for lhb coaches with u clamp with (two nos) of stainless steel machine washer a 6.4(a2 to is:1367 pt-14-1984) and (two nos) of stainless steel hex nut m6(a2-70 to is:1367 pt-14) to rcf drg no- lw63167 alt c of item no 4,5,6,7. [ warranty period: 30 months after the date of delivery ] ]

CTN :45469073

18 Jun, 2026 NA

Tiruvallur - Tamil Nadu

Tender For supply of machined washer 14, is 2016: 1967 / is: 2016: 1967

State Government

CTN :45447017

11 Jun, 2026 NA

Nadia - West Bengal

Tender For supply of item rate e-quotations for various types of mgnrega materials as per annexure-i under tehatta-ii development block - item rate, 1 st picked class brick, 1 st class brick, 1st class brick bats ( size as direction of eic)., silver sand, fine sand, medium sand, course sand, portland cement, brick aggregrates (single size) 40 mm normal size., stone aggregrates (single size) 40 mm normal size. (without carriage), stone aggregrates (single size) 20 mm normal size.(without carriage), stone aggregrates (single size) 10 mm normal size.(without carriage), stone aggregrates (single size) 5.6 mm normal size.(without carriage), stone aggregrates 13.2 mm nominal size. (without carriage), stone aggregrates 11.2 mm nominal size. (without carriage), 22.4 mm machine made chips (without carriage)., jhama metal kiln burnt. ( size as direction of eic)., thermocol 12.5 mm thick., polythene sheet (150 gm per sqm), hire charges of concrete mixer 0.25 to 0.40 cum with hopper, hire charges of diesel road roller- 8 to 10 tonne, hire charge of shuttering plank(without prop )(25mm-30 mm), hire charge of shuttering plank(with prop )(25mm-30 mm), hire charge of shuttering plank( with prop (30mm 37 mm ), vibrator (needle type 40 mm), steel material- tor steel rods/hysd bars/tmt bars(sail/tata/rinl) (fe415/fe500/fe500d,conforms to is 1786), steel material- tor steel rods/hysd bars/tmt bars(jsw/jspl/shyam/srmb/ssl/bmasl/electro steel)(fe415/fe500/fe500d,conforms to is 1786), ms ornamental grill (above 10 kg/sq.m up to 16 kg/sq.m, nail, 1220. wire mesh (rabbit), glue, 3050. galvanised steel corrugated sheets, 1023. galvanised steel j or l hooks 8 mm dia, galvanised steel bolt & nuts 6 mm dia and 25 mm long round head with slots, g.i lime washere, bitumen washer, stainless steel bolts/ square bar and plates, unslaked lime, supply of first aid box including medicines (specified by pia) at site., display board(ibs), display board(ibs), g.i. wire, coconut rope, sal ballah (10 cm ), sal ballah ( 125 mm ), sal ballah (15 cm ), cement primer(interior), cement primer(exterior), primer( for wood), cement based dust putty, black japan paint, enamel paint for steel grill, synthetic enemel paint in black or chocolate shade., woodwork for door and window frame malayashia sal, panel shutters of door and window, as per design (each panel consisting of single plank without joint), including fitting and fixing the same in position butexcluding the cost of hinge and other fittings.(ii) 40mm thick shutters with 19mm thick panel of size 30 to 45 cm.(b) sishu, gamar, champ,badam,bhola, mogra, hallak., supplying, fitting & fixing factory made p.v.c. door frame of size 50 mmx47 mm with a wall thickness of 5 mm, made out of extruded 5 mm, pvc sheet miter, coloured orissa pattern w.c. pan 580x440 mm, vitreous china pedestal for wash basin, vitreous china foot rests 250x125x25 mm, ptmt - liquid soap container of 400 ml capacity, ptmt - towel rail (600 mm), ptmt - soap dish/holder 138x102x75 mm, fan hook, r.c.c. ventilator, vitrified floor tile 60x60 cm, turpentine oil, vitreous china flat back wash basin 450x300 mm, r.c.c. pipes np2 class 450 mm dia, r.c.c. pipes np2 class 300 mm dia, supplying, fitting & fixing 30 mm thick both side prelaminated factory made solid panel pvc door shutter consisting of outer frame made out of m.s. tubes of 19 gauge thickness and size 19 mmx19 mm for styles, top and bottom rails, m.s. frame shall have cost of steel primers of approved make, supplying, fitting and fixing m.s. clamps for door and window frame made of flat bent bar, end bifurcated with necessary screws etc. by cement concrete(1:2:4) as per direction. (cost of concrete will be paid separately) (a) 40mm x 6mm, 250mm length, anodised aluminium butt hinges of approved quality manufactured from extruded section conforming to i.s. specification (i.s. 205/66) and fitted and fixed with cadmium plated screws: (vii) 100 x 75 x 4.0mm, anodised aluminium barrel / tower / socket bol

Central Government/Public Sector

CTN :45422869

23 Jun, 2026 NA

Nagpur - Maharashtra

Tender For supply of set of hardware consists of 1) hexagonal head bolt m 28 x 114 long x 2 mm pitch, qty. =16 nos. 2) hexagonal head castle nut of size m 24 qty 16 nos. 3) machined washer id =25 mm, od =44 mm thickness =04 mm qty. =16 nos. 4) split pin m5 qty =16 nos as per rdso drawing no. skel-5004 alt.-2 or latest. one set consist of 04 items in 64 nos. item to be procured from clw approved sources. [ warranty period: 30 months after the date of delivery ] ]

Machine Washer Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

State Government

Central Government/Public Sector

State Government

Central Government/Public Sector