Latest machinery equipment Tenders | Government machinery equipment Tenders

CTN :45724968

09 Jul, 2026 NA

Jalpaiguri - West Bengal

Tender For providing of repair, maintenance, and installation of plant/ systems/equipments (version 2) - repair/maint of joint filling at aircraft maneuvering area at afs hasimara under ge (af) hasimara; 596000; service provider

CTN :45720703

30 Jul, 2026 2.00 Crore

Chhatarpur - Madhya Pradesh

Tender For inviting rates of different items for construction of diffrent type of work as per demand on cm help line or ward parsad or public - supply of handpump material 2026-27, excavation for roadwork in soil with hydraulic excavator including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transporting to the embankment location with all lifts and lead up to 1000 m as per section-300 of the specifications.item no nvi-3.12, construction of embankment/sub-grade/earthen shoulders with material obtained from other sources, as per provisions of section 305 of the specifications, with approved materials/soil confirming to requirements given in table 301-1 of specifications including all lead and lifts, including cost of watering, compaction by vibratory roller/heavy pneumatic type roller etc. confirming to requirements given in table 301 2 of the specifications complete.item no nvi-3.12, construction of granular sub-base, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method at omc and compacting with vibratory roller of 80-100 kn static weight to achieve the desired density, including all lifts and lead complete in all respect as per section-400 of the specifications.by mix in place method item no nvi -4.1.1.1, construction of dry lean cement concrete sub- base over a prepared sub-grade with coarse and fine aggregate conforming to is: 383, the size of coarse aggregate not exceeding 26.5mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be as per table 600-1 of the specifications, cement content not to be less than 150 kg/cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 mpa at 7 days, mixed in a batching plant, transported to site, laid with paver with electronic sensor/mechanical paver, compacting with 8-10 tonnes vibratory roller, finishing and curing and as per section 601 of specifications.item no nvi- 6.1.1, providing and laying cement concrete grade m-20 with 20 mm graded crushed stone aggregate, mixing shall be in mechanical mixer, laying with paver compacting by use of pin, plate / screed vibrators including form work by strong steel girders fixed by spikes, separation membrane 125 micron thick, including cutting of joints @ 4 to 5 m interval and filling it with hot applied bituminous sealant (without dowel bars) (max. thickness 20 cm).item no nvi-6.4, construction of dowel jointed, plain cement concrete pavement in m-30 grade concrete over a prepared sub base with 43 or higher grade cement, coarse and fine aggregate conforming to is:383 maximum size of coarse aggregate not exceeding 25 mm, mixed in a batching and mixing plant as per approved mix design, transported to site, laid with a fixed form or slip form paver with electronic sensor spreading the concrete by shovels, rakes compacted using needle, screed and plate vibrator and finished in a continuous operation including provision of contraction, expansion, and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, placing of dowel bar, tie rod admixtures as approved, curing compound, finishing to lines and grades as per approved drawings as per irc:15 and as per section-602 of the specifications complete excluding cost of steel in dowel bar and tie rod etc.item no nvi-6.2.1, earth work in excavation for foundation, trenches for pipes / cables or drains etc. by mechanical means / manual means (exceeding 30cm in depth.) including ramming of bottom,dressing of sides,disposal of excavated earth including of all lift and lead upto 50m.disposed earth to be levelled and neatly dressed.all kinds of soil item no nii 2.6.1, demolishing cement concrete manually/by mechanical means including disposal of material with in 50 meters lead as per direction of engineer-in-charge.1:3:6 or richer mixitem no nii

CTN :45722140

20 Jul, 2026 NA

Mumbai - Maharashtra

Tender For providing of goods transport service – per trip based service - collection, transportation and safe delivery of machinery, equipment, tonners, gas cylinders and other accessories; open body taurus; 9mt 20-22ft lenght

CTN :45709609

02 Jul, 2026 NA

Kangra - Himachal Pradesh

Tender For restoration of rain damages of water supply scheme tikker indora (sh:- repair and replacement old damaged pumping machinery equipment of various pump house under js section panchrukhi (under pdna).

Central Government / Public Sector

CTN :45719310

14 Jul, 2026 17.73 Lacs

Banka - Bihar

Tender For repairing of antistatic bitumastic flooring and antistatic mastic coating in filling shed and repainting shed at lpg bottling plant, banka

Central Government/Public Sector

CTN :45703742

10 Jul, 2026 NA

Raigad - Maharashtra

Tender For providing of repair, maintenance, and installation of plant/ systems/equipments (version 2) - industry unit; cooling tower filter sand removal and re-filling job; buyer

Central Government/Public Sector

CTN :45365796

04 Jul, 2026 11.50 Lacs

Jammu - Jammu And Kashmir

Tender For corrigendum : repair resurfacing of certain roads and connected items at bd bari mil stn - m&l preparing black top surfaces by brushing with wire brushes for removing caked mud etc. sweeping with wire brush/brooms and finally fanning the cleaned surface with gunny bags or by mechanical blower to remove all loose dirt etc to black top surfaces, and applying evenly a priming/tack (viscosity grade paving bitumen of grade vg-10) @ 5 kg per 10 sqm to road surface bituminous asphaltic semi dense concrete consolidated thickness 30 mm with stone chippings graded aggregate with 5.5% of binder content by weight of total mix, (viscosity grade paving bitumen of grade vg-30) and 4% stone dust conforming to required specification for filler as per irc-95, 1987 (filler) by weight of mix, prepared in hot mix plant, rolled and compacted to required camber and gradient to uniform smooth surfaces by mechanical paver and rolled with 8 to 10 tone power roller completed all as specified and as directed., m&l for repair to potholes, any depth ,not exceeding 1 sqm each including sweeping free from dust and mud or water, scoring sunken surfaces in roads, path etc, cutting around edges to at least 25mm in depth, making good by filling in screened and graded road metal, watering and well ramming, applying tack coat with (viscosity grade paving bitumen of grade vg-10) @ 10.0 kg per 10 sqm of surface putting in & including premixed bituminous macadam, well rammed and sealed with binder 9.80 kg/sqm, blinded with 0.09 cum of stone chippings, 6.3mm size and again well rammed, rolled and compacted to required camber and gradient to uniform smooth surfaces by mechanical paver and using with 8 to 12 tonne power roller (including supply of premixed macadam, binder and chippings),completed all as specified and as directed., premix bituminous macadam laid / rolled and compacted using 8 to 12 tonne power roller to required gradient and camber, with broken stone graded aggregate with 4% of paving bitumen binder of viscosity grade vg-30 grade by weight of toal mix (consolidated thickness 75mm or less) completed all as specified and as directed., m&l providing and laying at or near ground level factory made kerb stone of m-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required completed all as specified and as directed., m&l for marking lines 2.5 mm thick, dashes arrows etc of any description n. exc 10cm width/girth on road surface using hot applied thermo plastic road marking paint of approved colour confirming to bs-3262-1989 with special applicator machine all as per manufacturere instruction completed all as specified and as directed., supply and fix solar cat eye (green/red) aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency mono rystafie solar panel 2.4v/ 0.3 watt one ni-ed rechargeable battery (1.2v/ 1600ma) consisting of super bright led with 10,000 to 18,000 mcd completed as per manufactures instructions etc completed all as specified and as directed., supply and fixing metal tubular dealineator made out of abs round body fitted with 2 nos 65 mm dia highly reflective reflectors made out of and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in pcc 1:2:4 (150x150x300mm) type b1 complete all as specified and directed, s&f manufacturing, supplying and fixing retro reflective mandatory/ regulatory sign boards of 900 mm diametre with support length of 3750 mm and made up of 2 mm thick aluminium sheet, face to be fu

State Government

CTN :45696686

06 Jul, 2026 NA

Jabalpur - Madhya Pradesh

Tender For providing and fixing of gear box 1no repairing and alignment of pedals bridge all items equipped in clariflocculator at filter plant nayagaon and providing and fixing of 60 hp booster pump spare parts at nayagaon and narmada pump house lalpur mppmcl - (a) providing & fixing of reduction gear type a33770/1la11torque305nm in place of worn out gear of flocculater including opening of old gear, greasing, oiling in new gear coupled with new coupling and tyre for jointing with motor etc. complete job. (b) repairing of clarifloculator by opening and lifting of bridge with the help of jack and fixing of new sleeve, bearing and chuck nut with washer and realignment of bridge by fabrication etc. complete and testing of run of clarifloculator bridge as per the direction of engineer in-charge., repairing of damaged reduction gear by filling the metal in hallow portion by way of casting, welding, machining, finishing to make the damaged portion like original, repairing of 250mm dia foot valve, providing & fixing spare parts of 60 h.p. booster pump & motor model dsm 100/36 lalpur:- 60 h.p. motor pump shaft cs(moc), shaft sleeve de/nde moc cs, bearing skf 6307 for dsm 100/36, bearing skf 3307 for dsm 100/36 pump,60 h.p. motor bearing de 63/3 skf motor, 60 h.p. motor bearing nde 63/3 skf motor., providing & fixing spare parts of 60 h.p booster pump & motor nayagaon filter plant.motor bearing skf 60 h.p. nu 313 de, motor bearing skf 60 h.p. nu 313 nde, set of bearing for db80/20 pump 6307, pump shaft cs moc for db80/20 pump, shaft sleeve ss410 moc db80/20 pump.

State Government

CTN :45685915

07 Jul, 2026 6.70 Lacs

Jaipur - Rajasthan

Tender For संस्था स्थित नवीन 300 महिला हाॅस्टल के मैस संचालन हेतु मैस मशीनरी उपकरण क्रय करने हेतु निविदा सूचना। - tender notice for purchasing mess machinery equipment for running the mess of the new 300 women hostel located in the institution.- spice grinding machine , ban my hot and cold working table, , loe breaking machine, , semi automatic chapati machine, , steel furnace 02 sat burner, , mixi grinder (commercial), , scales electric

State Government

CTN :45693811

23 Jul, 2026 NA

Panchkula - Haryana

Tender For purchase of machinery/equipment for plastic and rubber trade for up-gradation of govt. quality marketing centre faridabad under trade infrastructure for export scheme(ties). - purchase of machinery/equipment for plastic and rubber trade for up-gradation of govt. quality marketing centre, faridabad under trade infrastructure for export scheme(ties)., computerized universal testing machine: 10kn (tensile/compression/ flexural strength measurements)., izod/charpy impact test (impact test measurements), digital shore a & d hardness testers (hardness measurements)., carbon black content apparatus (determination of carbon black content of plastics), ozone chamber (rubber or elastomers resistance to ozone degradation), hot air oven (heat resistance of rubber & elastomers)., muffle furnace (thermal characterization of plastics & rubber), rockwell hardness tester (hardness measurements), compression set apparatus (compression set characteristics of rubber), flammability tester (with accessories), climatic chamber, melt flow index tester (with automatic cutting facility and weighing scale), ultra violet (uv-b lamp) test apparatus, oil bath immersion tester, water bath

Machinery Equipment Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government / Public Sector

Central Government/Public Sector

Central Government/Public Sector

State Government

State Government

State Government