Latest machinery spares Tenders | Government machinery spares Tenders

Central Government/Public Sector

CTN :40522251

20 Jun, 2025 NA

Kutch - Gujarat

Tender For supply of machinery spares 1 , machinery spares 2 , machinery spares 3 , machinery spares 4 , machinery spares 5 , machinery spares 6 , machinery spares 7 , machinery spares 8 , machinery spares 9 , machinery spares 10

Central Government/Public Sector

CTN :40065166

31 May, 2025 3.91 Lacs

Kutch - Gujarat

Tender For bid to ras tender for supply of machinery spares - fuel lift pump diaphram 75116227 , fuel injector apu 75115882 , fuel injector nozzle 75145650 , 104-112 mm hose clamp hwdr024008n , elevator feed back rod kagh13 , elevator rod end kagh17 , elevator ram 8000-c-032-h82 , thermostate 750-40981

Corporations And Associations And Others

CTN :40374730

03 Jun, 2025 NA

Jalandhar - Punjab

Tender For corrigendum : supply of machinery spares - supply of machinery spares, c.s. trash plate machined confirming to is-1030 grade 23/45. free from blow holes .as per drg., grooving as per drg.-1020-mh-0402-01-171(rate should be quoted lum sum)( mill no. 1 ), drilling as per drg. ----------do---------(rate should be quoted lum sum)( mill no. 1 ), grooving as per drg. bcsm/mh/113 (mill no. 2 )(rate should be quoted lum sum), drilling as per drg. ----------do--------- (mill no. 2 )(rate should be quoted lum sum), grooving as per drg. bcsm/mh/112 (mill no. 3)(rate should be quoted lum sum), drilling as per drg. ----------do--------- (mill no. 3)(rate should be quoted lum sum), grooving as per drg. bcsm/mh/112(mill no. 4)(rate should be quoted lum sum), drilling as per drg. ----------do---------(mill no. 4)(rate should be quoted lum sum), mill no.1c.s. scraper with machining as per drawing 1020-mh-0402-01-255 & 256, grooving of top scraper as per drg.1020-mh-0402-01-256(rate should be quoted lum sum), grooving of discharge scraper as per drg.1020-mh-0402-01-255(rate should be quoted lum sum), drilling as per drg. ----------do---------(rate should be quoted lum sum), mill no.2m.s. scraper with machining as per drawingmh-ts-02-r1, grooving of top scraper as per drg. ----------do------(rate should be quoted lum sum), drilling as per drg. ----------do---------(rate should be quoted lum sum), m.s. scraper with machining as per drawing mh-ds-02-r1, grooving of discharge scraper as per drg. ----------do---------(rate should be quoted lum sum), drilling as per drg. ----------do---------(rate should be quoted lum sum), mill no.3&4m.s. scraper with machining as per drawing mh-ts-03-r1, drilling as per drg.- ------do--------(rate should be quoted lum sum), grooving of top scraper as per drg.- ------do--------(rate should be quoted lum sum), m.s. scraper with machining as per drawing mh-ds-03-r1, grooving of discharge scraper as per drg.- .------do--------(rate should be quoted lum sum), drilling as per drg. ----------do---------(rate should be quoted lum sum), mill no.2,3 , pitch 50mmm.s. scraperwith machining as per drawing(grpf pressure shoot), grooving of top scraper as per drg. bcsm /mh/015 (rate should be quoted lum sum), grooving of bottom scraper as per drg. bcsm /mh/016 (rate should be quoted lum sum), drilling as per drg.(rate should be quoted lum sum), mill no. 4, pitch 40mmm.s. scraperwith machining as per drawing(grpf pressure shoot), grooving of top scraper as per drg. bcsm /mh/017 (rate should be quoted lum sum), grooving of bottom scraper as per drg. bcsm /mh/018 (rate should be quoted lum sum), drilling as per drg. (rate should be quoted lum sum), c.s crown pinion confirming to is-1030 grade 23/45 free from blow holes and proof machine as per drg., mill no.1 as per drg.(rate should be quoted lum sum), mill no.2,3&4 as per drg.(rate should be quoted lum sum), cane cutting knives, cane cutting knives made from shock resistance ms plate 25 mm thick confirming to is-2062. and tested at hardness-500 bhn tensile-65 kg/mmyield strength-50 kgf/mm elongation-20 % minwith proper heat treatment to avoid breaking the knives. as per drawing no. 1020-mh-0303-1700-105with hard facing, cane cutting knives made from shock resistance ms plate 25 mm thick confirming to is-2062. and tested at hardness-500 bhn tensile-65 kg/mmyield strength-50 kgf/mm elongation-20 % minwith proper heat treatment to avoid breaking the knives. as per drawing no. 1020-mh-0303-1-105with hard facing, c.s trash beam, c.s trash beam as per drg.bcsm/mh/0164

CTN :40469202

14 Jun, 2025 NA

Budgam - Jammu And Kashmir

Tender For tender for supply of chop saw machine make dewalt , gas cutter make esab , grinding goggle white , welding goggle black , nozzle cutting 1 oblique 64 , nozzle cutting 1 oblique 32 , nozzle cutting 1 oblique 16 , welding white glass shield screen , welding glass black , leather gloves , grinding wheel 100x6x16mm , cutting wheel 100x6 , hydrochloric acid , nausadar , cooper soldering chisel kavya , soldering lead 80 percent , 680 welding rod , gas welding aluminum rod and flux , ms welding rod 2 point 5mm , ms welding rod 3 point 15 mm , ms welding rod 4mm , painting brush 2 inch , painting brush 4 inch , painting brush 01 nos to 12 nos , m seal , anabond , thread tape , insulation tape , 12 nos benjo washer 01 pkt of 100 pcs , 15 nos benjo washer 01 pkt of 100 pcs , 17 nos benjo washer 01 pkt of 100 pcs , 19 nos benjo washer 01 pkt of 100 pcs , clamp hose 0 point 5 inch , clamp hose 1 inch , clamp hose 1 point 5 , feviquick , araldite 25 gm , nut and bolt 8x1 point 5mm , nut & bolt 10x1 point 5mm , nut & bolt 12x1 point 5mm , nut & bolt 14x1 point 5mm , steel screw 0 point 5 inch , steel screw 01 inch , steel screw 1 point 5 inch , water emery blade paper 180 , hacksaw blade , power hacksaw blade , dandrite , wheel balancing weight 10g 20g 50g , grease nipple 11mm , grease nipple 13mm , female thimble pkt of 100 nos , thimble 08mm pkt of 100 nos , thimble 10mm pkt of 100 nos , thimble 12mm pkt of 100 nos , thimble 16mm pkt of 100 nos , thimble 18mm pkt of 100 nos , pvc heat shrink sleeve 01mm , pvc heat shrink sleeve 02mm , pvc heat shrink sleeve 03mm , pvc heat shrink sleeve 04mm , pvc heat shrink sleeve 05mm , pvc heat shrink sleeve 06mm , pvc heat shrink sleeve 08mm , lt wire 1 sq mm auto cable 90 mtr roll , lt wire 2 sq mm auto cable , lt wire 4 sq mm auto cable , lt wire 0.75 sq mm auto cable , lt wire 6 sq mm auto cable , lt wire 8 sq mm auto cable , pvc harness tape black 19mmx60 mtr non adhesive , sleeve tape 25 mtr roll , cotton tape 25 mtr roll , ampper tape 25 mtr roll , battery terminal oblique positive heavy duty , battery cable 80 sq mm red 25 mtr roll , battery cable 80 sq mm black 25 mtr roll , battery cable 50 sq mm red 25 mtr roll , battery cable 50 sq mm black 25 mtr roll , auto blade fuse 05 amp , auto blade fuse 10 amp , auto blade fuse 15 amp , auto blade fuse 20 amp , auto blade fuse 25 amp , soldering wire 60 oblique 40 , head light blub 90 oblique 100 24v , single filament bulb 21w oblique 24v , double filament bulb 21w oblique 24v , single filament bulb 10w oblique 24v , single filament bulb 3w oblique 24v , fog light hallogen bulb 55w oblique 12v , relay 4 pin 12v oblique 30 amp , 4st relay 24v , push batton switch , toggle switch , fog light halogen bulb 55 oblique 21v , head light bulb 12v , assy tail lamp lh , bulb 12v , socket set 46 pcs 1 oblique 4 inch , screw driver set taparia , screw driver flat 150mm taparia , screw driver star 300mm taparia , screw driver star 150mm taparia , line tester taparia , allen key set bosch oblique taparia , ups battery 12v 7 point 5 ah make zebronics , digital wall clock having tempreture display feature

CTN :40362541

06 Jun, 2025 NA

Shimla - Himachal Pradesh

Tender For vehicle repair - carriyng the veh to authorised workshop for repair servicingwashing with soap water to remove grease/mud including replacement of defective parts such as engine oil gear oil coolant air oil filter etc attending faults of mechanical electrical nature etc tappet settings if required cleaning and tightening of loose fastener and tune up the engine hub greasing and greasing of parts checking of batteries applying petroleum jelly to battery terminals adding distilled water checking the oil coolant levels of vehicle of mahindra bolero camper complete all as specified and directed by engr in charge note replacement of defective parts engine oil coolant etc which ever is required measured and paid seprately , labour only for repair to wheel and brake system after opening and taking out all four drums from wheel and taking out old unserviceable wheel bearing from front and rear wheels greasing wheel hubs complete filling of brake fluid and bleeding the brake system with brake fluid assembling of wheels and testing the brake system including balancing on computer machine and wheel alignment of mahindra bolero camper vehicle complete for smooth functioning of vehicle on road complete all as specified and directed by engr in charge spare parts which ever is required measured and paid seprately. , supply only for following spare parts , supply only oil filter 1 point 0 nos , supply only air filter 1 point 0 nos , supply only front wiper blade 2 nos , supply only front brake pad 1 point 0 set of 2 , supply only wheel cover 1 point 0 set of 4 , supply only mud guard flap as per sample 4 point 0 nos , supply only brake shoe set 1 point 0 set of 4 , supply only engine oil 7ltrs , supply only transmission oil 2 point 0 ltrs , supply only brake & clutch oil 1 point 0 ltrs , supply only coolant 8 ltrs , supply only distill water for battery 1ltrs

Central Government/Public Sector

CTN :40427444

11 Jun, 2025 NA

Uttara Kannada - Karnataka

Tender For procurement of machinery spares for icgs c-420 -phoenix contactconverter , main broadcast mic , belt

CTN :40418916

23 May, 2025 NA

Bareli - Madhya Pradesh

Tender For supply of set of hawe make items for wheel balancing machine of machining & testing line. set list as per annexure-c. make-hawe [ warranty period: 30 months after the date of delivery ]

CTN :40271951

19 May, 2025 NA

Bareli - Madhya Pradesh

Tender For supply of set of hawe make items for wheel balancing machine

Central Government/Public Sector

CTN :40248103

19 May, 2025 NA

Mysore - Karnataka

Tender For supply of set of adhesives for gluing of balancing weights to lhb wheels for dynamic ba lancing of lhb wheel sets consisting of 3 items 1) loctite sf 790 paint stripper 510 gms (locti te product no: sf 79040) , qty: 2nos; 2) loctite sf 7075, activator, qty: 01 no; 3) loctite aa324 in dustrial adhesive, qty: 04 nos., make: loctite or its equivalent for gluing process of balance weights to lhb wheels during dynamic balancing of lhb wheels on dynamic wheel balancing machine. [ warranty period: 30 months after the date of delivery ]