Latest machinery tools Tenders | Government machinery tools Tenders

CTN :45715626

09 Jul, 2026 NA

Ramgarh - Jharkhand

Tender For supply of conservancy services , conservancy services and hot weather appliance repair , machinery tools and equipments , ladder services , safety equipments

CTN :45715702

09 Jul, 2026 NA

Ramgarh - Jharkhand

Tender For supply of tree tending and prunning , tree tending and conservancy services , machinery tools and equipments , ladder services , safety equipments

Central Government/Public Sector

CTN :45730416

20 Jul, 2026 NA

Hubli - Karnataka

Tender For request for proposal (rfp) for appointment of authority engineer for providing project management services for design,supply, construction, installation, testing and commissioning of integrated rolling stock coaching depot at hubballi including all civil, electrical general, electrical traction, signalling & telecom works and machinery, tools & plants" (the "project") through engineering, procurement and construction (the "epc").

CTN :45696125

13 Jul, 2026 NA

Palacode - Tamil Nadu

Tender For supply of equipment for mechanical engineering department - supply of equipment for mechanical engineering department, lathe machine :specification :bed: 2v & 2 flat, induction hardened and ground minimum bed length: 1375 mm bed width: 240 mm capacity: height of centre: 165 mm swing over bed: 320 mm swing over gap: 510 mm swing over cross slide: 180 mm distance between centres: 650 mm slides: cross slide travel: 200 mm compound slide travel: 115 mm spindle: spindle bore: 40 mm spindle nose: thread type, 62 mm spindle taper: mt-3 tail stock: quill diameter: 38.1 mm taper: mt-3 travel: 120 mm speed: no. of speeds: minimum 8 range: (40 800 )rpm threading: metric: (1 6 )mm (min 13 steps) english: (2 24 )tpi (min 19 steps) lead screw: (1 4) tpi electrical: motor: 1.5 hp, 230v/415v, 50 hz drive: v-belt structure: bed: close-grained cast iron (fg 260) gears: hardened steel base: rigid cast iron stand , open cup apparatus :specification :standard compliance: astm d92 / is 1448 (part 69) test method: open cup flash and fire point determination test cup: brass, precision machined with heat resistant handle heater: electric heater (1000 w 10% nickel chromium) with variable control heating rate: 5 6 c per minute (as per standard) temperature range: -6 to 400 c thermometer: astm 11c or equivalent flame applicator: gas test flame with fine control valvebody: stainless steel housing display: analog / digital temperature indicator power supply: 230v ac, 50 hz safety: overheat protection heat insulation , closed cup apparatus :specification :standard compliance: astm d93 / is 1448 (part 21) test cup:brass cup diameter: 50.7 50.8 mm capacity: minimum 70 ml stirring system heater: electric heater 650 w 10% heating rate: 1 12 c/min adjustable ignition: pilot flame with automatic shutter mechanism temperature measurement: thermometer or digital sensor(ip-28c or astm) display: digital temperature display power supply: 230v ac, 50 hz safety:over-temperature cut-off flame safety control , tail stock assembly :specification :medium-duty tailstock assembly for dismantling & assembly quill stroke: minimum 75 mm taper: mt-3 (preferred standard) feed: hand wheel operated features: set-over screws for taper turning spindle locking arrangement body: cast iron (fg 260) spindle: hardened steel, slip gauge :specification :set size: m87 (87 pieces) or equivalent range: 1.001 mm to 100 mm step sizes: 0.001 mm 0.005 mm 0.01 mm material: high-grade alloy steel / tungsten carbide (preferred) hardness: hrc 63 65 accuracy: grade: grade 1 or grade 2 flatne flatness / parallelism: 0.5 m stored in protective wooden boxes to prevent wear; calibration grades include charts for exact sizes , dc motor:specification :type: dc shunt motor (dismantling model) power: minimum 0.5 hp voltage: 220 v dc speed: 1500 rpm poles: 4 pole construction: laminated stator salient poles accessible armature features: cut section / open type suitable for dismantling and reassembly, hydraulic cylinder :specification :bore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steel calibration grades include charts for exact sizes supply: mounted on training base suitable for dismantling and inspection , hydraulic operated directional control valves (dcv):specification :type: manual spool type dc valve configuration: 4/2 way size: ng06 (cetop 3) rated pressure: 210 bar flow capacity: 20 40 lpm body: hardened steel / cast steel spool: ground and hardened ports: clearly marked (p, a, b, t) supply: mounted on training plate suitable for dismantling and study , bearing with shaft assembly :specification :bore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steelsupply:mounted on training base suitable for dismantling and inspection , coupling unit using driving and dr

Central Government/Public Sector

CTN :45682056

15 Jul, 2026 NA

Tiruchirappalli - Tamil Nadu

Tender For supply of stored pressure fire extinguishers of mechanical foam type with a capacity of 09 litres, conforming to is 15683:2018 (or latest), designed for effective fire fighting against class b fire and having fire rating of 4a, 144b. the extinguisher shall be constructed from stainless steel materials conforming to clause 9.2.6 of is 15683:2018. the foam concentrate shall be aqueous film forming foam (afff) confirming to is 4989:2018. the unit shall be equipped with flexible hose and foam applicator nozzle. a brass or stainless steel squeeze grip valve shall be provided in accordance with clause 9.3 of is 15683. test certificate from nabl accredited laboratory for the test pressure (pt) of the assembled unit as mentioned in clause 6.1 of is 15683:2018 shall be provided along with supply. each unit shall be supplied with a wall bracket or stand for secure mounting and shall include maintenance instructions for annual inspection by certified personnel. marking shall be as per clause 10 of is 15683:2018 with the year of manufacture permanently engraved or embossed. complete documentation including user manual, warranty, and certification details must be provided with each extinguisher. [ warranty period: 30 months after the date of delivery ] ]

CTN :45644911

13 Jul, 2026 1.95 Crore

Imphal - Manipur

Tender For procurement of furniture (f) and kitchen equipment /machinery, tools and plants (ke/mtp) for emrs mairang, west khasi hills in the state of meghalaya.

CTN :45404122

19 Jun, 2026 NA

Palacode - Tamil Nadu

Tender For corrigendum : supply of equipment for mechanical engineering department - supply of equipment for mechanical engineering department, lathe machine :specification :bed: 2v & 2 flat, induction hardened and ground minimum bed length: 1375 mm bed width: 240 mm capacity: height of centre: 165 mm swing over bed: 320 mm swing over gap: 510 mm swing over cross slide: 180 mm distance between centres: 650 mm slides: cross slide travel: 200 mm compound slide travel: 115 mm spindle: spindle bore: 40 mm spindle nose: thread type, 62 mm spindle taper: mt-3 tail stock: quill diameter: 38.1 mm taper: mt-3 travel: 120 mm speed: no. of speeds: minimum 8 range: (40 800 )rpm threading: metric: (1 6 )mm (min 13 steps) english: (2 24 )tpi (min 19 steps) lead screw: (1 4) tpi electrical: motor: 1.5 hp, 230v/415v, 50 hz drive: v-belt structure: bed: close-grained cast iron (fg 260) gears: hardened steel base: rigid cast iron stand , open cup apparatus :specification :standard compliance: astm d92 / is 1448 (part 69) test method: open cup flash and fire point determination test cup: brass, precision machined with heat resistant handle heater: electric heater (1000 w 10% nickel chromium) with variable control heating rate: 5 6 c per minute (as per standard) temperature range: -6 to 400 c thermometer: astm 11c or equivalent flame applicator: gas test flame with fine control valvebody: stainless steel housing display: analog / digital temperature indicator power supply: 230v ac, 50 hz safety: overheat protection heat insulation , closed cup apparatus :specification :standard compliance: astm d93 / is 1448 (part 21) test cup:brass cup diameter: 50.7 50.8 mm capacity: minimum 70 ml stirring system heater: electric heater 650 w 10% heating rate: 1 12 c/min adjustable ignition: pilot flame with automatic shutter mechanism temperature measurement: thermometer or digital sensor(ip-28c or astm) display: digital temperature display power supply: 230v ac, 50 hz safety:over-temperature cut-off flame safety control , tail stock assembly :specification :medium-duty tailstock assembly for dismantling & assembly quill stroke: minimum 75 mm taper: mt-3 (preferred standard) feed: hand wheel operated features: set-over screws for taper turning spindle locking arrangement body: cast iron (fg 260) spindle: hardened steel, slip gauge :specification :set size: m87 (87 pieces) or equivalent range: 1.001 mm to 100 mm step sizes: 0.001 mm 0.005 mm 0.01 mm material: high-grade alloy steel / tungsten carbide (preferred) hardness: hrc 63 65 accuracy: grade: grade 1 or grade 2 flatne flatness / parallelism: 0.5 m stored in protective wooden boxes to prevent wear; calibration grades include charts for exact sizes , dc motor:specification :type: dc shunt motor (dismantling model) power: minimum 0.5 hp voltage: 220 v dc speed: 1500 rpm poles: 4 pole construction: laminated stator salient poles accessible armature features: cut section / open type suitable for dismantling and reassembly, hydraulic cylinder :specification :bore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steel calibration grades include charts for exact sizes supply: mounted on training base suitable for dismantling and inspection , hydraulic operated directional control valves (dcv):specification :type: manual spool type dc valve configuration: 4/2 way size: ng06 (cetop 3) rated pressure: 210 bar flow capacity: 20 40 lpm body: hardened steel / cast steel spool: ground and hardened ports: clearly marked (p, a, b, t) supply: mounted on training plate suitable for dismantling and study , bearing with shaft assembly :specification :bore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steelsupply:mounted on training base suitable for dismantling and inspection , coupling unit using

Central Government/Public Sector

CTN :45458977

17 Jun, 2026 NA

Multi City - Punjab

Tender For auction sale of depot miscellaneousellaneous scrap - scrap of used and condemned hand tools like pipe wrench 12",18",ratchet handle, sockets, 36,30,32,24mm ,spanner 10-11,24-46,24-27,30-32 ,adopters, wire cutter, torque wrench., pliers, extension rod , screw driver, pipe wrench 10,14",18",24",plastic pipe cutter 42mm,pop rivet machine(manual) , pneumatic sika applicator gun 310ml,600ml, manual sika applicator gun 310ml and other miscellaneous hand tools of various types ,make,sort & sizes with or without ferrous and non ferrous attachment with broken/unbroken, damaged etc (qty shown in the lot is approximate) pl no-98090331

CTN :45460353

16 Jul, 2026 NA

Gadhada - Gujarat

Tender For auction sale of metallic, non-metallic - auction of writeoff (condemned) machinery, tools/ equipments, furniture item and raw material scrap items of/in iti botad, ranpur, barwala and gadhada institutes on " as is where is basis" on gem portal through forward auction.

CTN :45460346

08 Jun, 2026 NA

Multi City - Meghalaya

Tender For auction sale of machineries, electric industrial, non-electric industrial, metallic, non-metallic, others - forward auction for disposal of mixed lot of surplus, obsolete and unserviceable stores consisting of electronic items, machinery, tools, computers and other scrap items on "as is where is basis" through gem portal

Machinery Tools Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector