Latest mag chrome brick sale Tenders | Government mag chrome brick sale Tenders

CTN :43618048

28 Jan, 2026 NA

Darjeeling - West Bengal

Tender For supply of pcc hollow block 400 x 200 x 200mm minimum strength 50kg per sqcm , quick setting compound , cement opc 43 grade in poly bags of 50 kg each , sand course , stone aggregate 20mm graded , stone aggregate coarse 40mm , 60 mm thick pcc jumbo colorado inter locking coloured tiles each tile covering an area of 0 point 0444 meter square , pcc solid block 400x200x200mm of grade b , hardcore 40mm to 63mm guage , brick of size 230x115x75mm

CTN :43618104

28 Jan, 2026 NA

Darjeeling - West Bengal

Tender For supply of with 1 mm thk wiremesh of sizes 1505x900 mm , bunk bed scafolding made of shs 25x25x2 and fl 40x6 mm of sizes 250x850 mm , ladder shs 25x25x2 mm 300x900 mm , aluminium double leaf window 900 x 750 mm , door of 40mm puf panel with hinges and frame 800x2125mm , pvc vinyl sheet 2mm thick x 2000mm width with adhesive of sufficient quantity to apply on floor , puff insulated roof panel of 30 by 62 mm thick as per specification , puff insulated wall panel of 40 mm thick as per specification , roof ridge 2440x610 mm , flashing l 100x100x2440 mm , flashing l 40x40x2440 mm , flashing u 35x42x35x2440 mm , double bunk with 42 kg per cum density cushio folding type 2000mm x 750 mm , nut and bolt m10x60 mm , nut and bolt m12x40 mm , nut and bolt m12x75 mm , nut and bolt m12x75 mm plane headed , nut and bolt m12x150 mm , tiger bolt 50 mm dia with movable handle and base plate , anchor pin with pointed edge 450 mm , stair with step , sd screw 75 mm , sd screw 25 mm , sd screw 125 mm , pvc board of size 8 inch x 6 inch , pvc board of size 4 inch x 6 inch , socket 5 amp , switch 5 amp , angle holder made of backelite lamp holder should be insulated type , led bulb 12 watt , pvc copper cable 1sqmm single core with multistarnded conductor for earth wire in green colour , pvc frls copper cable 1 poingt 5 sqmm single core with multistranded conductor 1100 volts grade , pvc frls copper cable 2 point 5 sqmm single core with multistranded conductor 1100 volts grade in green colour for earthing , pvc insulated and sheathed copper service cable 10 sqmm 2 core , caping casing 3 by 4 inch length 10 feet , pvc elbow for casing capping of size 3 by 4 inch , pvc tee for casing capping of size 3 by 4 inch , decorative type ultra slim linear led lighting fixture with extruded led tube light fitting 18 oblique 20 watt , switch socket combination 5 amps 5 pin with gang box , mcb spn 40 amps 240 volts , mcb box with door 4way , tape insulation 10 mtr , pvc square block , ceiling rose pvc , rubber hand gloves superior quality , measuring fibre glass tape 5 mtr long , nylone rope 1 to 10mm dia 50 to100 meter oblique reel , four leg aluminium ladder 8 feet long , industrial safety helmet , brick hammer 1 point 2kgs , drill bit 6mm dia , drill bit 8mm dia , drill bit 10mm dia , cordless pistol grip drill as per technical specification , 500 watt 13mm variable speed reversible hammer drill machine as per technical specification , angle grinder as per technical specification , nail gun as per technical specification , tile cutter as per technical specification , electric riveting machine as per technical specification , manual rivet gun , jigsaw machine as per technical specification , allen key set foldable type as per technical specification , hacksaw frame with 2 blade , neon tester , screw driver 12 inch with insulated plastic handle , tape measuring metallic 30m , cutting plier insulate 6 inch , cutting plier insulate 8 inch , pipe wrench 12 inch , pipe wrench 18 inch , spanner adjustable 12 inch , spanner adjustable 18 inch

CTN :43618107

28 Jan, 2026 NA

Darjeeling - West Bengal

Tender For supply of socket 10 a modular type , surface plastic box suitable for moduler switches and socket of 4 module , surface plastic box suitable for moduler switches and socket of 3 module , solid plate with base frame suitable for surface plastic box of 4 module , solid plate with base frame suitable for surface plastic box of 3 module , blank plate of single module , steel screw full threaded screw 1 inch , conduit pipe 20mm dia 10 feet long , pvc tee 20mm , pvc elbow 20mm , pvc circular jn box 2 to 4 way , pvc shaddle clip with screw , ceiling rose pvc , pvc square block , tape insulation 10 mtr , mcb db spn 8 way double door 240 volts with bus bar , mcb 6 amps sp , mcb 20 amps sp , mcb spn 40 amps 240 volts , exhaust fan 300mm sweep with louver shutter , pendent holder made of bakelite , lcs set complete with all accessories as per brief technical specification , elect earthing complete set as per brief technical specification , hot water boiler of capacity 500ltrs having average performance to heat 500 ltrs as per tech specification , puf insulated 55mm thick water tank 1000 ltrs with gi flange for connection with nipple and gasket as per tech specification , water staging platform ms angle of size 40x40x6 mm size of the staging 2 point 4m above ground level with the water tank platform of size 1 point 5 x 1 point 5m , ppr pipe 20mm dia , ppr pipe 25mm , ppr tee 20mm , ppr tee 25mm , ppr elbow 90 degree 20 mm , ppr elbow 25mm , ppr elbow 90 degree 25mm , ppr male threaded socket 20 to 15 mm dia , ppr female threaded socket 20 to 15 mm dia , ppr female threaded elbow 20 to 15 mm dia , ppr male threaded elbow 20 to 15 mm dia , ppr socket 20mm dia , ppr socket 25mm dia , ppr union 20mm , ppr union 25mm , ppr reducer 25x20mm , ppr reducer tee 25x20mm , bib tap brass chromium plated sutable for 15mm ppr water supply line , ppr balve valve light weight brass 25 mm , ppr balve valve light weight brass 20 mm , ppr balve valve light weight brass 15 mm , pvc clip for ppr pipe 25mm dia , pvc clip for ppr pipe 20mm dia , ppr reducer elbow 25x20mm , ppr male threaded tee 25x20mm , pillar cock brass chomium plated suitable for 15mm ppr water supply line , taeflon tape , pvc float value heavy duty 25mm dia suitable for ppr pipe , 25mm pp-r tank connector , pre fabricated septic tank of 2000 ltrs capacity septic tank shall be anchored with hold , prefabricated soakage pit of 1000 ltr capacity soakge pit shall be anchored with hold fast , pvc pipe 4 inch dia 6 mtr long heavy duty type a having 5 kg pressure per sqcm , pvc socket 4 inch dia , pvc elbow 4 inch , pvc tee 4 inch , pvc floor trap 4 inch , iwc stainless steel pvc p trap inlet 4 inch dia with 4 inch outlet complete , pvc flusing cistern 10 ltrs capacity with pvc connection and waste pipe angle and pvc pipe etc , stop cock cp 25 mm , wash hand basin 500x400mm steel with waste pipe and coupling alongwith 02 nos ci bracket with screw pvc connection 450mm long , vitreous china bowl urinal flat back white of size 465x355x265 mm with grating and union for discharge pipe as per tehnical specification , looking mirror size 450 x 600 x 5 point 5 mm thick with 4 mm ply backing and aluminium l section frame with nacessary hanging clips mirror , stainless steel peg stay contains 4 hooks fancy type , soap dishes stainless steel size 10cmx12cm , towel rail cp 600mm long , plaster trowel with woodwen handle , plumb bob iron , galvanised iron pan mortar tasla 18 gauge 16 inch dia minimum weight 1 kg , double end spanner for 16 mm dia nuts and bolts , showel square nose 14 gauge tata high carbon steel blade size 310 x 245mm shaft size //bid details 2 / 67 710mm fitted with strong steel crutched wooden handles , fish line , hammer ball pine 1kg , electric tile cutting machine with 5 nos inter changeable blades , measuring tape 3 mtr , gi sheet cutter scissors , transperant pipe 5 mm dia bore for water leveling , multipurpose non slip rubber reusable gloves for scrubbing cleaning brick work colour og

CTN :43368861

19 Jan, 2026 8.97 Lacs

Imphal - Manipur

Tender For bid to ras supply of duty of size 20 mm dia , tile cutter blade 4 inch , pointed toe with a wider heel brick trawel of size 5 inches long and 10 inches wide of stainless steel blade , pvc casing capping 32mm wide not less than 2 mm thick , pvc coupler for 32mm casing and capping pipe , pvc tee for 32mm casing and capping pipe , pvc elbow for 32mm casing and capping pipe , pvc corner bend for 32mm casing and capping pipe. , iron cutter blade 10 inch oblique 12 inch oblique 14 inch , mcb db 2 way spn 240 volt conform to is 13032. , mcb db 8 way spn 240 volt conform to is 13032. , mcb 10 a sp 240 volt , mcb 20 a sp 240 volt , mcb 32 a dp 240 volt , exhaust fan 300 mm sweep , transperent made of pvc water level pipe of 8mm of bore and length of pipe is 30mtr , steel alloy steel or carbon steel drop forged brick hammer of wt 450gm to 680 gms , galvanised steel tube mortar pan of semi circular shape of diameter 29 inch thickness , pvc moulded mortar pan of semi circular shape of size 30 inch x 30 inch from top and 16 inch x 16 inch , cotton swing thread for construction should be heavy wt 100 percentage cotton or , stainless steel wire cloth 0.36mm nominal dia of wire and avg width , water proof plywood commercial bwr grade isi marked of size 4 ft x 8 ftx12mm thick , water proof plywood commercial bwr grade isi marked of size 4 ft x 8 ft x 19mm thick , second class hard wood scantling 50mm x 75mm , nails 1 inch 2 inch 3 inch 4 inch , pink primer for wooden surface , synthetic enamel paint high gloss superiour quality any shade white colour , thinner for paint romover pack of 01 ltr bottle , painting brush 75 oblique 100mm standard quality , ordinary portland cement opc 43 grade in 50 kg bags , coarse sand dimapur sand conforming to is 383 -1978 , coarse aggregate crushed stone 20mm graded conforming to is 383-1979 , non skid ceramic dark coloured tiles of size 600mm x 600mm x 9- 10mm thick , white cement , red oxide primer , self tapping screws with ppdm washer 50mm oblique 75mm oblique 100mm long , silicon gell tube of 29.9 ml to 118.0 ml volume based polymer , silicon gell gun consist of frame hold a tube or cartridge a trigger , chequered cement concrete tiles bullnosed 32 x 32 x 20mm thick , vitreous china water closet eurpoean pattern with integrated foot rests and p trap , pvc connection pipe 600mm long with both side neat of , cp cast copper alloy bib cock long body 15mm bore , cp cast copper alloy stop cock 15mm bore , cp cast copper alloy stop cock angle type 15mm bore , health faucet cp brass 1000mm long with peg stay bracket , factory made solid panel pvc door shutter of 30mm thick with style consisiting of frame made out of ms tube , flush door shutter of 30mm thick with solid core construction , barbed wire , cpvc pipe 25mm , cpvc tee 25mm , cpvc elbow 25mm , cpvc socket 25mm , cpvc union 25mm , cpvc reducer socket , cpvc gate walve 25mm , tenk nipple 25mm , flot walve 25mm , cpvc femail thread socket 25mm , cpvc elbow 20mm , cpvc mail thread socket 20mm , pvc pipe 75mm 10 ft long , pvc elbow 75mm , pvc socket 75mm , adhesiv solvent , cpvc tenk nipple 20mm , sink cupling 32mm , west pipe for sink , gi gate walve 25mm , gi nipple 6 inch 25mm , gi socket 25mm

State Government

CTN :43580666

24 Jan, 2026 7.23 Lacs

Kottayam - Kerala

Tender For items includes 6 number of cubicles and 2 cupboard, shifting aluminium door and sliding window brick wall upto 1m height its plastering and painting works, tile works, false ceiling cement board for covering wall,upvc gutter painting and carpenter

corporations/Associations/Others

CTN :42485358

21 Jan, 2026 55.80 Lacs

Thiruvananthapuram - Kerala

Tender For corrigendum : supply of digital radiography system type c (qty:10) - digital radiography system 50kw ceiling suspended type, single detector with all accessories as per specifications except the following, x-ray table 6 way floating table, dry imager with 2 online trays, additional detector (rate fixed for three years from the date of price bid opening), light weight lead apron with thyroid gaurd, additional workstation, x-ray trolley table (not taken for evaluation), x-ray table four way (not taken for evaluation), x-ray view box double film (not taken for evaluation), cost of one viewing station (hardware) with necessary software and ups (not taken for evaluation), fully automated full length image stitching on table and vertical bucky necessary hardware and software (not taken for evaluation), 15.12.2:dismantling doors, windows and clerestory windows (steel or wood ) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead:of area beyond 3 sq. metres, 15.12.1:dismantling doors, windows and clerestory windows (steel or wood ) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead:of area 3 sq. metres and below, 15.23.1:dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.for thickness of tiles 10 mm to 25 mm, 15.3:demolishing r.c.c. work manually / by mechanical means including stacking of steel bars and disposal of unserviceable material with in 50 metres lead as per direction of engineer -in-charge., 15.57:dismantling aluminium / gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 metres lead as directed by engineer - in-charge, 15.7.4:demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer-in-charge.in cement mortar, 15.60:disposal of building rubbish/ malba/ similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved, 2.1.1:earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5m in width as well as 10 sqm on plan including disposal of excavated earth up to 50 m and lift up to 1.5 m, disposed soil to be levelled and neatly dressed:all kinds of soil, 50.2.25.1:filling with contractors own earth ( excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m as per direction of site engineer-in-charge, 2.34.1:supplying chemical emulsion in sealed containers including delivery as specified.chlorpyriphos / lindane emulsifiable concentrate of 20%, 2.35.1.1:diluting and injecting chemical emulsion for post -constructional anti-termite treatment (excluding the cost of chemical emulsion):along external wall where the apron is not provided using chemical emulsion @ 7.5 litres / sqm of the vertical surface of the substructure to a depth of 300mm including excavation channel along the wall & rodding etc. complete:with chlorpyriphos /lindane e.c. 20% with 1% concentration, 50.4.1.1:providing and laying in position cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 12.5 mm nominal size) up to floor five level excluding the cost of centering, shuttering, finishing for leveling coarse of floor and roof etc., 50.5.33.2:providing and laying in position machine batched and machine mixed design mix m-20 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the

corporations/Associations/Others

CTN :42485371

21 Jan, 2026 75.33 Lacs

Thiruvananthapuram - Kerala

Tender For corrigendum : supply of digital radiography system type b (qty:10) - digital radiography system 80kw ceiling suspended type, single detector with all accessories as per specifications except the following, x-ray table 6 way floating table, dry imager with 2 online trays, additional detector (rate fixed for three years from the date of price bid opening), light weight lead apron with thyroid gaurd, additional workstation, x-ray trolley table (not taken for evaluation), x-ray table four way (not taken for evaluation), x-ray view box double film (not taken for evaluation), cost of one viewing station (hardware) with necessary software and ups (not taken for evaluation), fully automated full length image stitching on table and vertical bucky necessary hardware and software (not taken for evaluation), 15.12.2:dismantling doors, windows and clerestory windows (steel or wood ) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead:of area beyond 3 sq. metres, 15.12.1:dismantling doors, windows and clerestory windows (steel or wood ) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead:of area 3 sq. metres and below, 15.23.1:dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.for thickness of tiles 10 mm to 25 mm, 15.3:demolishing r.c.c. work manually / by mechanical means including stacking of steel bars and disposal of unserviceable material with in 50 metres lead as per direction of engineer -in-charge., 15.57:dismantling aluminium / gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 metres lead as directed by engineer - in-charge, 15.7.4:demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer-in-charge.in cement mortar, 15.60:disposal of building rubbish/ malba/ similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved, 2.1.1:earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5m in width as well as 10 sqm on plan including disposal of excavated earth up to 50 m and lift up to 1.5 m, disposed soil to be levelled and neatly dressed:all kinds of soil, 50.2.25.1:filling with contractors own earth ( excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m as per direction of site engineer-in-charge, 2.34.1:supplying chemical emulsion in sealed containers including delivery as specified.chlorpyriphos / lindane emulsifiable concentrate of 20%, 2.35.1.1:diluting and injecting chemical emulsion for post -constructional anti-termite treatment (excluding the cost of chemical emulsion):along external wall where the apron is not provided using chemical emulsion @ 7.5 litres / sqm of the vertical surface of the substructure to a depth of 300mm including excavation channel along the wall & rodding etc. complete:with chlorpyriphos /lindane e.c. 20% with 1% concentration, 50.4.1.1:providing and laying in position cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 12.5 mm nominal size) up to floor five level excluding the cost of centering, shuttering, finishing for leveling coarse of floor and roof etc., 50.5.33.2:providing and laying in position machine batched and machine mixed design mix m-20 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the

Central Government And Public Sector

CTN :43512549

28 Jan, 2026 60.05 Lacs

Rohtak - Haryana

Tender For special repair to raising of existing boundary wall and repair/refixing of ms grill at western/southern side, providing tile brick on edge pathway along boundary wall at garden area, repair of damaged/sunken floor and structural repair of shahjahan ki baoli, meh

Central Government And Public Sector

CTN :43462443

27 Jan, 2026 45.19 Lacs

Muzaffarnagar - Uttar Pradesh

Tender For supply of material and job work under special repair to restoration and conservation of tomb of saiyed saif khan and his mother majhera muzaffarnagar 2025 2026 - items to be executed, unslaked lime, surkhi, c. sand, gur, belgiri, gum, brick aggregate 20-25 mm, 2nd class brick, kakkar stone, white marble, 65mm thick red sand stone 10 sqm, grey/white sand stone, rr stone, 65mm thick red sand stone 10 sqm (for arch), lakhori brick, tile bricks, mud including top finish, kail wood sleeper, raking out joints in lime or cement mortar and preparing the surface for re-pointing or replastering, including disposal of rubbish to the dumping ground, all complete as per direction of engineer-in-charge., ruled/ flush pointing on white sand stone masonry surface with lime, surkhi and marble dust mortar in the ratio of 1:1.5:1/2 {one lime : 1.5 surkhi (15% dark red and 85% light yellow surkhi) : 1/2 marble dust}. (the rate is inclusive of all materials & labours involved except scaffolding)., demolishing lime concrete manually/ by mechanical means and disposal of material within 50 metres lead as per direction of engineerin- charge., providing and fixing double scaffolding system (cup lock type) on the exterior side of building/structure, upto 25 metre height, above ground level, including additional rows of scaffolding in stepped manner as per requirement of site, made with 40mm dia m.s. tube, placed 1.5 metre centre to centre, horizontal & vertical tubes joint with cup & lock system with m.s. tubes, m.s. tube challis, m.s. clamps and staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for execution of work of cleaning and/ or pointing and/ or applying chemical and removing it thereafter. the scaffolding system shall be stiffened with bracings, runners, connecting with the building etc, wherever required, if feasible, for inspection of work at required locations with essential safety features for the workmen etc., complete as per directions and approval of engineer-in-charge. note:- (1) the elevational area of the scaffolding shall be measured for payment purpose. (2) the payment will be made once only for execution of all items for such works., "earth work in excavation by mechanical means (hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. 2.8.1 all kinds of soil.", surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m. 2.28.1 all kinds of soil, "demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of engineer - in - charge. nominal concrete 1:4:8 or leaner mix (including equivalent design mix)", provision for providing & making lime slacking & mortar pit by means of pit excavation, brick masonry & plastering over it. the size of the over all pit is 8.00m x 3.00m & depth is 1.00m. the pit is divided in to three parts & cement plastere, provision for removal of malba for cleaning the sites including collecting, staking and disposal of the rubbish /malba upto 100 meter lead including all the labour and transportation etc complete. out of the monuments premises and further, provision for the purchasing of essential article and t & p for the proper execution of the work i) pvc sheet, ii) pvc pan (tasla), iii) hammer with handle 1kg, iv) iron chisel 4",6", 8", v) pvc bucket, vi) pvc mug, vii)wire & coir brush, viii) wire & coir brush, ix) gum boot pvc in pair, x) pvc pipe 1", xi) wooden handle (fawra, hammer), xii) first aid box with medicine, provision for drawing and documentation charges including inspection of exis

CTN :43451864

26 Jan, 2026 NA

Jalpaiguri - West Bengal

Tender For supply of 750mm front and back side wall. , puff insulation pannel of 40 mm thick size 2526 2606mm x 240mm gable side wall left and right , puff insulation pannel of 40 mm thick size 2606 3002mm x 1190mm gable side wall left and right. , puff insulation pannel of 40 mm thick size 3002 3398mm x 1190mm gable side wall left and right. , puff insulation pannel of 40 mm thick size 3398 3002mm x 1190mm gable side wall left and right. , puff insulation pannel of 40 mm thick size 3002 2606mm x 1190mm gable side wall left and right. , puff insulation pannel of 40 mm thick size 2606 2526mm x 240mm gable side wall left and right. , puff insulation pannel of 40 mm thick size 2355mm x 1190mm for short partiotion wall. , puff insulation pannel of 40 mm thick size 2355mm x 480mm for short partiotion wall. , puff insulation pannel of 30 mm thick both side pgi sheet 3100mm x 1000mm roof panel. , roof ridge 2440mm x 600mm. , u channel of size 35mm x 42mm x 35mm and 2440mm long. , l flashing 100mm x 100mm x 2440mm , lflashing 40mm x 40mm x 2440mm , tiger bolt 50 mm dia with movable handle and base plate , anchor pin made of 15 mm dia and 450 mm long , foundation lock 48mm dia x 900 mm x2mm , texture finished gypsum board false ceiling , gi binding wire annealed not less than 0. 3mm dia bending wire. , cable pvc insulated aluminium conductor 10 sqmm 2 core , xlpe insulated pvc seathed 16 sqmm 2 core , exhaust fan , plastic body wall mounting fan 400mm sweep. , pvc box , angle holder , pvc copper cable 1. 5 sqmm single core , pvc frls copper cable pvc 2. 5 sqmm , a system of portable silent inverter alternative , switch socket combination mutipurpose 5 amp 5 pin with gang box , modular type 5amp 3 pin electical top multi plug. , switch piano type 5 amp isi marked. , pvc casing caping , ceiling rose 2 to 3 terminal. , pvc electrical wire cover flexible pipe 17mm dia long. , pvc elbow , internal external thread elbow , full thread screw , pvc tee , study lamp with bulb , t light , tape insulation 10 mtr. , dp mcb 40a , single mcb 10a , single mcb 6a , mcb box with door 4 way , double leaf steel lockers. , fire extinguisher , water dispenser 500watt , waste bin 120 ltr , looking mirror 1200x750x3. 5mm thick , air mattress with compact deflation capacity made of pvc or textile reinforced membrane. , air pump for filling air in air mattresses. , heating device kerosene based , rubber hand gloves superior quality , measuring fibre glass tape 5 mtr long. , four leg aluminium ladder 8 feet long , industrial safety helmet , brick hammer , drill bit 6mm dia , drill bit 8mm dia , drill bit 10mm dia , cordless pistol grip drill , 500 watt 13mm variable speed reversible hammer drill machine , angle grinder , nail gun , tile cutter , electric riveting machine , manual rivet gun. , jigsaw machine , allen key set , screw driver 12 with insulated plastic handle , tape measuring metallic 30m. , cutting plier insulate 8 inch , pipe wrench 12 inch , pipe wrench 18 inch , spanner adjustable 12 inch , spanner adjustable 18 inch , bottom frame as per atc , bottom floor frame of size 2500mmx1300mm rhs 80mmx40mmx3. 2mm as per atc , corner main column of ms rhs 80mm x 40mm x 3. 2mm x 2750mm , partation column of ms rhs 80mm x 40mm x 3. 2mm x 2035mm , ladder size 1000 x 600 mm. frame of ms rhs 80 x 40 x 3. 2mm , fixed hold fast with hole for nut bolt of ms shs 25 x 25 x 3. 2mm 100mm , fixed c channel to secure the 50mm puff pannel of islc 40 x 75mm as per sketch , column base of ms checkered plate size 300mm x 300mm x 5mm with 8 nos holes , door post column of ms rhs 80 x 40 x 3. 2mm x //bid details2 / 1062035 , truss made of ms shs 25 x 25 x 2. 6mm 1480mm x 440mm as per sketch. , purlins made of ms shs 25 x 25 x 2. 6mm 2718mm. , door shutter of 50mm puff panel size 590mm x 2035mm. , side of 50mm puff panel size 1140mm x 2035mm. , partation middle pannel of 50mm puff panel size 1140mm x 2035mm. , top panel of 50mm puff panel size 1195mm x 1185mm. , back panel of 50mm puff p

Mag Chrome Brick Sale Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

corporations/Associations/Others

corporations/Associations/Others

Central Government And Public Sector

Central Government And Public Sector