Latest magnetic field tester Tenders | Government magnetic field tester Tenders

Central Government / Public Sector

CTN :45363089

12 Jun, 2026 50.24 Lacs

Panipat - Haryana

Tender For supply installation testing and commissioning of computerized test station on data loggers and data acquisition online portal for identified test lead points parameters monitoring under nrpl

Central Government/Public Sector

CTN :45343189

09 Jun, 2026 NA

Gokak - Karnataka

Tender For auction sale of pway scrap - pl no. 98987331 lot no. ubl-gkk-006-ms-25-g description: cond & u/s. cl-iii 1) erc clip t-3701 cl-iii taken in to sample test 20 no¿s:- 17.9+18.00+17.950+17.8+17.850 = 89.5, qty in mts = 89.5/100 = 0.895x13900 = 12440.5/1000 = 12.440 2) ms liner t-3738 cl-iii taken in to sample test 20 no¿s: 4.3+4.6+4.5+4.2+4.3+ = 21.9, qty in mts = 21.9/100 = 0.219x47800 = 10468.2/1000 = 10.468, total qty in mts =12.440+10.468 = 22.908 mts(approx). remarks: sse given assessment basis only. (delivery on actual weighment basis) gokak railway station yard at km 662/300-400, in karnataka state. under the custody of sse/p-way/bgm. terms and conditions: 1] other p. way items nearby the lot are not for sale and to be returned to the custodian. 2] prospective bidders are advised to inspect the lots put up for e-auction and as mentioned in the relevant auction catalogue prior to bidding. 3] the detailed inventory, qty, road approach and location of the lot is as per the joint inspection report. 4] the purchasers should survey the material for road approach, location and qty before bidding the lot. after bidding no correspondence will be entertained. 5) after full payment the successful bidder should request for a date of delivery at least 7 days in advance from the desired date. 6) the delivery request should have 3 different dates. the earliest possible/available date will be given. note: there will be a compulsory gap of 2 days between the date of delivery fixation letter and the actual date of delivery. the purchaser shall abide by this.

Central Government/Public Sector

CTN :45343188

09 Jun, 2026 NA

Khanapur - Karnataka

Tender For auction sale of pway scrap - pl no. 98987331 lot no. ubl-knp-005-ms-25-g description: cond & u/s. cl-iii 1) ms scrap consists of erc clip t-3701 cl-iii taken in to sample test 20 no¿s:- 17.5+17.4+17.2+16.9+17.0 = 86, qty in mts = 86/100 = 0.860x50800 = 43688/1000 = 43.688 2) ms liner t-3738 cl-iii taken in to sample test 20 no¿s: 4.0+4.1+4.3+4.5+4.1 = 21, qty in mts = 21/100 = 0.210x61700 = 12957/1000 = 12.957, total qty in mts = 43.668+12.957 = 56.645 mts(approx). remarks: sse given assessment basis only. (delivery on actual weighment basis) khanapur railway station yard at km 585/000-200, in karnataka state. under the custody of sse/p-way/bgm. terms and conditions: 1] other p. way items nearby the lot are not for sale and to be returned to the custodian. 2] prospective bidders are advised to inspect the lots put up for e-auction and as mentioned in the relevant auction catalogue prior to bidding. 3] the detailed inventory, qty, road approach and location of the lot is as per the joint inspection report. 4] the purchasers should survey the material for road approach, location and qty before bidding the lot. after bidding no correspondence will be entertained. 5) after full payment the successful bidder should request for a date of delivery at least 7 days in advance from the desired date. 6) the delivery request should have 3 different dates. the earliest possible/available date will be given. note: there will be a compulsory gap of 2 days between the date of delivery fixation letter and the actual date of delivery. the purchaser shall abide by this.

Central Government And Public Sector

CTN :45336363

29 May, 2026 NA

Lumding - Assam

Tender For supply of tertiary station name board/ diagonal boards. boards shall be of high strength one piece 600mmx 600mm square shape powder coated in ral 9003 to minimum 50um thickness on both sides, with three point bending flexural test of the board collar greater than 7800n. primary collar of height 20mm with corners of r 45mm for prevention of accidental injury shall be stretch roll formed to 90 degree to sign face, without involving any cutting and welding and secondary collar of 20mm width, shall be bend inward to 90 degree to primary collar for installation purpose. this board shall be made of 2mm thick aluminum sheets, 2mm thick roll formed s.s clamping plate which shall be firmly rotatory riveted to secondary collar. approved test and graphics shall be eco friendly printed on retro reflective sheets astm d 4956 it madein three colors and three languages hindi, english and regional language and firmly pasted on sign face noinstallation hardware shall be visible from the sign face. this board shall not have any separate back frame for strengthening. all hardware items used shall be of ss304 grade, high tensile and anti theft nuts shall beused in all type of installation, all charges including gst and installations. make superior quality or similar. note- due to gm inspection in lmg materials are urgently required and installed within 7 days from the date of p.o [ warranty period: 30 months after the date of delivery ] ]

CTN :45340411

04 Jun, 2026 NA

Theni - Tamil Nadu

Tender For purchase of non consumable item in material testing lab for civil department - torsion testing machine (code e006)function: conducts torsion and twist tests on materials. such as metal wires, tubes, and sheetstorque measurement : pendulum dynamometer systemtorque application : geared motor through a gearboxtorque range : adjustablematerial tested :metal wires, tubes, sheet materialsfloor-mounted electromechanical type,230 v ac, 50 hz power supply,digital display, sand replacement test apparatus (or) core cutter devices(code e014)metal tray / base platesquare metal tray with a central hole (e.g., 300 mm 300 mm with 100 mm hole).another common size: 450 mm square, 50 mm deep with 200 mm central hole for larger kits seamless steel cylinder with no sharp edges.common size: 100 mm internal diameter, 127 175 mm length (varies by kit). mkpequipments.com +1wall thickness ~3 mm (industrial products), total station with all accessories(code e022)leica flexline ts10 reflectorless total station angle accuracy: 1 5 (smaller values = higher precision). magnification: ~28x 30x optical zoom. distance range:with prism: 2,000 m 6,000 m+reflectorless: 600 m 2,000 m typical. battery backup: ~12 36 hrs field operation., rockwell cum brinell hardness testing machine with intentor set box(code e031)min initial test force :10kgf, total test force range : 60kgf,100kgf,150 kgf, max. height of specimen :215 mmmin distance from indenter center tomachine wall :132 mm accessories:steel ballpreferred indentor 1/16" preferred steel ball: 1/16"and with all standard accessories to run the machine

CTN :45354788

11 Jun, 2026 NA

Shekhapura - Bihar

Tender For supply of arduino uno microcontroller , breadboard , jumper wires male female , resistors , led red green , capacitors , transistors , diodes , sensors , lcd , relay module , motors , power supply battery , multimeter , soldering kit , project work station , fpga trainer boards , logic analyzer , dual regulated power supply , arduino uno , stm dev board , pic development kit , raspberry pi , digital multimeter , dac trainer board , rtos trainer , soldering stations , lm analog temp sensor , ds digital temp sensor , ptrtd resistance temp detector , k type thermocouple , ir proximity sensor reflective ir , digital ir obstacle sensor , ir flame sensor , ir temperature sensor mlx90614 , mq two lpg smoke , mq three alcohol , mq six lpg butane , mq seven carbon monoxide , mq air quality , pir motion sensor , ultrasonic sensor , accelerometer , gyroscope , solderless breadboard full size , mini breadboard , jumper wires male male , jumper wires male female , jumper wires female female , ic socket eight pin , ic socket fourteen pin , ic socket sixteen pin , solar cell trainer kit , ujt as relaxation oscillator kit , scr characteristics kit , ldr , photo diode , phototransistor , semiconductor temperature coefficient trainer kit , logic gate trainer kit , ic trainer kit , measurement of steady state and transient response of rl rc and rlc circuits , frequency response of twin t notch filter and to study of active filter , study of single phase inverter trainer , to study the behaviour , determine the transient , to study of pid controller for simullatio n process , to study basic electric al trainer , to study single phase transformer , to obtain efficiency of a dc shunt machine , to obtain efficiency and voltage regulation of a single phase transform , to study dc series motor , make connection of dol starter , test the machines required , maxwells bridge trainer kit ) /bid number : gem/2026/b/7582907 * /dated: 27-05-2026 & & / bid document 1 / 44

CTN :45347035

11 Jul, 2026 NA

Thumba - Kerala

Tender For supply of pem water electrolyser test station

CTN :45341065

11 Jun, 2026 12.14 Lacs

Agra - Uttar Pradesh

Tender For roof treatment, plaster repair and other civil works at electricity commercial division under cash collection center lal diggi, e. u. test (d) , lal diggi, electricity urban distribution division lal diggi, 33/11 kv sub station lal diggi aligarh

CTN :45090503

03 Jun, 2026 NA

Manmad - Maharashtra

Tender For corrigendum : supply of hv switchboards c c - supply 6.6kv switchboard at manmad pumping station tag no-hv swbd-1-manmad as per mr sl. no. 1.1 , supply 6.6kv switchboard at manmad pumping station tag no-hv swbd-2-manmad as per mr sl. no. 1.2 , mandatory spares for hv swbds at manmad terminal as per mr sl. no. 1.3 , supply 6.6kv switchboard at sanghvi pumping station tag no-hv swbd-1-sanghvi as per mr sl. no. 1.4 , supply 6.6kv switchboard at sanghvi pumping station tag no-hv swbd- 2-sanghvi as per mr sl. no. 1.5 , supply 6.6kv switchboard at sanghvi pumping station tag no-hv swbd-3-sanghvi as per mr sl. no. 1.6 , mandatory spares for hv swbds at sanghvi terminal as per mr sl. no. 1.7 , supply 6.6kv switchboard at gujri pumping station tag no-hv swbd-1- gujri as per mr sl. no. 1.8 , supply 6.6kv switchboard at gujri pumping station tag no-hv swbd-2-gujri as per mr sl. no. 1.9 , mandatory spares for hv swbds at gujri pumping station as per mr sl. no. 1.10 , supervision of installation work at manmad as per mr sl. no. 1.11 , performing testing and commissioning activities at manmad as per mr sl. no. 1.12 , supervision of installation work at sanghvi as per mr sl. no. 1.13 , performing testing and commissioning activities at sanghvi as per mr sl. no. 1.14 , supervision of installation work at gujri as per mr sl. no. 1.15 , performing testing and commissioning activities at gujri as per mr sl. no. 1.16 , on call visit charges for amc for 1st year at manmad as per mr sl. no. 1.17.1 , testing kit mobilizing charges for 1st year as per mr sl. no. 1.17.2 , on call visit charges for amc for 2nd year at manmad as per mr sl. no. 1.17.3 , testing kit mobilizing charges for 2nd year as per mr sl. no. 1.17.4 , on call visit charges for amc for 3rd year at manmad as per mr sl. no. 1.17.5 , testing kit mobilizing charges for 3rd year as per mr sl. no. 1.17.6 , on call visit charges for amc for 1st year at sanghvi as per mr sl. no. 1.18.1 , testing kit mobilizing charges for 1st year as per mr sl. no. 1.18.2 , on call visit charges for amc for 2nd year at sanghvi as per mr sl. no. 1.18.3 , testing kit mobilizing charges for 2nd year as per mr sl. no. 1.18.4 , on call visit charges for amc for 3rd year at sanghvi as per mr sl. no. 1.18.5 , testing kit mobilizing charges for 3rd year as per mr sl. no. 1.18.6 , on call visit charges for amc for 1st year at gujri as per mr sl. no. 1.19.1 , testing kit mobilizing charges for 1st year as per mr sl. no. 1.19.2 , on call visit charges for amc for 2nd year at gujri as per mr sl. no. 1.19.3 , testing kit mobilizing charges for 2nd year as per mr sl. no. 1.19.4 , on call visit charges for amc for 3rd year at gujri as per mr sl. no. 1.19.5 , testing kit mobilizing charges for 3rd year as per mr sl. no. 1.19.6 , site training for hv swbds supplied at manmad as per mr sl. no. 1.20 , site training for hv swbds supplied at sanghvi as per mr sl. no. 1.21 , site training for hv swbds supplied at gujri as per mr sl. no. 1.22 , unit rates for test as per attached annexure-1 as per mr sl. no. 1.23 , unit rates for 2 years o and m spare as per clause no. 4.5.3 as per mr sl. no. 1.24

Central Government/Public Sector

CTN :45345908

22 Jun, 2026 3.55 Lacs

Thiruvananthapuram - Kerala

Tender For supply of watch pocket general service with hand luminous , watch maker set , senhouse slip for towing cable , spray painting system with complete accessories , torch signalling morse , portable sander seven inch dia , pollution response suit , pol test kit , man overboard marker , hull maintenance kit , glass magnifying hand nickel plated , gasket cutting tool , drafting compass , briefcase , bicycle complete with gears , pedestal fan , insect killer two ft two tube , indicator neon electrical potential , hot air blower , handset with microphone and plug , handset receiver with microphone and plug , air purifier filter cum ionizer , soldering desoldering station

Magnetic Field Tester Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government / Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government And Public Sector

Central Government/Public Sector