Latest magnetic lifter Tenders | Government magnetic lifter Tenders

Central Government/Public Sector

CTN :42117163

15 Nov, 2025 NA

Medak-T - Telangana

Tender For bid to ras corrigendum : supply of permanent magnetic lifter (q3)

State Government

CTN :41706011

26 Nov, 2025 9.00 Lacs

Kheda - Gujarat

Tender For corrigendum : works of lifting/shifting, emergency replacement & overhauling of various capacity of 11kv & 3.3kv ht motor for 800mw unit-8 at gsecl, wtps on as and when required basis.

CTN :42714724

19 Nov, 2025 NA

Rangapahar - Nagaland

Tender For supply and installation of generator spares (7.5 and 63 kva) at hq 3 corps aor - the bidder is required to quote itemwise price for the various scope of work listed in the boq document individually and overall rate of all the items would be taken for deriving the l1 bidder., gen set 7.5 kva kirlosker green, fuel filter, oil filter, air cleaner, armature for self str, brush carier, field coil for self str, bendix drive, stop solenoid sw with adopter, rectifier plate, rotating diode, self starter solenoid, oil pressure switch (llop), changeover switch 63 amp, bty 12v 150 ah, dc indication lamp, ac indication lamp, fuel pipeline(feed pump to filter), altenator armature rewinding (for civil), dc amp meter 50 amp, avr 3 phase, piston ring, overhauling gasket set, head gasket, fuel pipe (large ), fuel pipe (small), self starter bush, alternator regulator tr-15, amp meter, volt meter, temp sensor, ign sw, fuel gauge meter, dc altenator(bty charging ), air filter, oil temp gauge, coupling, carbon brush, gasket, bridge rectifier, bty terminal +ve & -ve, carbon brush set, armature for self starter, field coil for self starter, 4 st relay, fanbelt, stop solinoide, rubber coupling, coupling mounting stud, genr set 63 kva , make : kirloskar (ha 694 tc), oil filter element, exhaust fan 450mm, overflow pipe injector to fip, oil filling cap, fuel pipe 19 x 19 - .1/1.5mtr long, bty 12 volt 150 ah, fuel tank cap, esu-01, volt mtr 0.500 vac-72 sq mm, frequency meter 45-55 hz 7219mm, self starter armature, self starter field coil, bandix drive, alternator carbon brush carrier, self starter solenoid, self starter bush set, alternator carbon brush, eng stop solenoid, mccb 100 - 4 pole, lugs 35 mm, oil temp gauge, oil pressure gauge, dc ammeter 0-50-0, relay unit 12v dc with 2 relay, eng mounting pad, alternator mounting pad, hours meter ac 240 vac, panel lock, expansion below, bty lead +ve & -ve 2 mtr long, benjo bolt 19 mm, benjo washer 19 mm, door lock (lh & rh), float charger 12v dc, thimble 25mm, selector switch, 4 st relay, ac indication lamp, connector 4 pole 100 amp, 1.5 sq mm single core copper wire, socket set taparia, bty 12v 180 ah, fuel filter 1.1 ltr, fuel filter micro, oil filter, spp, contactor mcx 22, mcb 4 pole 100 amp, stop solenoid, armature for self starter, dc indication lamp, connector 4 pole 63 amp, air filter, change over sw 100 amp, relay unit with box, oil pressure switch(llop) with adopter, 35 sqmm 4 core armd cable, rotaing diode, change over switch 200 amp 4 pole, piston ring set, piston assy ha std 4 ring version, rocker assy, stud rocker cover 55mm long, starter ring ha 121 teeth, air blower bearing 6204z, big end bearing, quadrant and sleeve, plunger returning spring, roller assy pump, feed pump assy, injector nozzle, fuel line from feed pump to filter -19 x 19- 1 mtr long, fuel line from filter to fip - 19 x 19 -1 mtr long, benjo bolt 10mm with washer, benjo bolt 13mm with washer, benjo bolt 14mm with washer, benjo bolt 19mm with washer, turbocharger repair kit, spin-on fuel filter 0.6 ltr fine, spin-on oil filter big (06.040.20.00.0), oil pressure sensor, oil pressure gauge 0-10 kg per sq cm, su, aux contactor (in panel board), oil temperature gauge, hose air cleaner, rocker cover gasket, field coil for self starter, mcb 125 amp 4 pole, self bush set, ignition switch, electronic regulator for alternator, solenoid switch, set of copper washers, set of joints, anabond 666 t max 200 gm, valve seal, 25 sq mm 4 core cable, fuel filter 19x19 pipe, 2.5 sqr mm single core copper wire, connecting rod big end bearing, connecting rod bolt with nut, crank shaft oil seal fwe, crank shaft oil seal pulley end, thrust washer, lock washer for connecting rod, bumping clearance shim, cylinder head assy, air breather pipe, air cleaner assy, push rod, inlet valve, exhaust valve, fuel line from tank to main line -19 x 19- 1.5 mtr long, fuel line from main line to feed pump - 19 x 19- 1.5 mtr long, fuel lifting pump, overflow

Central Government And Public Sector

CTN :42701216

29 Nov, 2025 NA

Nicobar Island - Andaman And Nicobar Islands

Tender For procurement of 178 items of is group c001 - ei6091b-336-100-003 guide disc, ei6091b-336-100-007 valve set, ei6091b-336-100-010 diaphragm holder, ei6091b-336-100-014 locking spring, ei6091b-336-100-018 retaining plates, ei6091b-336-100-025 lifting spindle, ei6091b-336-100-072 guide washer, ei6091b-336-100-397 level support, ei6091b-336-100-398 frame half, ei609ib-336-100-400 piston, ei6091b-336-100-403 plug, ei6091b-336-100-404 valve guide, ei6091b-336-100-417 front cover, ei6091b-336-100-405 valve cone, ei6091b-336-100-433 cover, ei6091b-336-100-777 retaining ring, ei6091b-336-190-146 cylinder ring assy, ei6091b-336-190-220 o ring, ei6091b-336-190-224 o ring breathing valve diaphragm assy for aga divator, e16091b-336-190-225 o rlng, ei6091b-336-190-226 o ring, ei6091b-336-190-246 screw, ei6091b-336-190-248 screw, ei6091b-336-190-249 washer, ei6091b-336-190-256 cover plate, ei6091b-336-190-258 pin, ei6091b-336-190-260 gland seal for cylinder valve for aga divator, ei6091b-336-190-296 washer, ei6091b-336-190-298 valve stem set, ei6091b-336-190-332 valve housing assembly, ei6091b-336-190-334 lever assy, ei6091b-336-190-349 cover assembly, ei6091b-336-190-350 mask w cover and bv w safty press, ei6091b-336-190-346 suit hose, ei6091b-336-190-358 counter pressure assy, ei6091b-336-190-359 visor frame assy, ei6091b-336-190-380 locking clip, ei6091b-336-190-384 o ring, ei6091b-336-900-021 valve seat, ei6091b-336-900-097 screw, ei6091b-336100092 nipple, ei6091b-336100400 piston, ei6091b-336100604 cap, ei6091b-336190288 low pressure hose, ei6091b-336190373 pressure equalizing pad, ei6091b-336921843 carabiner hook stainless steel 316, ei6091b-87014-51 pressure gauge assy, ei6091b-98857-01 cylinder pack 326 7, ei60918-96134-01 bull nose adapter for 50 ltr cylinders, ei6091b-96710-51 dp1 surface panel, ei6091b-96725-0270 mtr supply hose, ei6091b-97520-11 cylinder weight 13 8kg, ei6091b-99336-02 ducs 75 meters, ei6091b-87040-51 high pressure hose assembly, ei6091b-87018-51 breathing bag, ei6091b-336-100-241 dust plug, ei6091b-1246d mask mounted lamp with battery, ei6091b-30102-01 kit t connections vent handle carabiner hook safety, ei6091b-30581-51 welding visor, ei6091b-30582-51 welding visor, ei6091b-30798-01 transport box, ei6091b-336-100-006 exhalation diaphragm, ei6091b-336-100-008 securing ring for breathing valve with safety pressure, ei6091b-336-100-011 guide pin, ei6091b-336-100-015 distance ring, ei6091b-336-100-016 lever, ei60918-336-100-020 connection nipple, ei6091b-336-100-021 centre spindle, ei6091b-336-100-022 lever spring, ei6091b-336-100-028 cover, ei6091b-336-100-029 screw, ei6091b-336-100-048 spring, ei6091b-336-100-052 gland nut, ei6091b-336-100-057 washer, ei6091b-336-100-058 spring, ei6091b-336-100-068 protective ring, ei6091b-336-100-073 bushing, ei6091b-336-100-077 anti rust tube, ei6091b-336-100-115 webbing buckle, ei6091b-336-100-116 buckle fixed part, ei6091b-336-100-162 spring, ei6091b-336-100-173 retaining clip, ei6091b-336-100-305 gasket, ei6091b-336-100-401 waist strap, ei6091b-336-100-418 nipple, el6091b-336-100-421 dlffusor, ei6091b-336-100-425 anti freezing cap, ei6091b-336-100-436 positive pressure spring, ei6091b-336-100-437 washer, ei6091b-336-100-438 sealing spring, ei6091b-336-100-461 valve housing, ei6091b-336-100-603 handle, ei6091b-336-100-606 nut, ei6091b-336-100-809 head harness for divi g mask face mask for aga divator, ei6091b 336-100-890 spacer, ei6091b-336-190-017 cover assembly, ei6091b-336-190-030 cylinder valve, ei6091b-336-190-033 hand wheel, ei6091b-336-190-034 nipple, ei6091b-336-190-064 valve cone assembly, ei6091b-336-190-145 cylinder ring, ei6091b-336-190-221 o ring, ei6091b-336-190-222 o ring, ei6091b-336-190-227 o ring, ei6091b-386-190-228 o ring, ei6091b-336-190-229 o ring for regulator unit, ei6091b-336-190-236 o ring, ei6091b-336-190-237 o ring, ei6091b-336-190-240 o ring pack of 10, ei6091 b-336-i90-243 screw, ei6091b-336-190-247 screw, ei6091b-336-190-255 circlip, ei6091b-336-1

Corporations / Associations / Others

CTN :42718850

13 Nov, 2025 49.70 Lacs

Chennai - Tamil Nadu

Tender For under ward councilor fund) improvement to face lifting for footpath at laffon street and providing street name board at various street in div- 62, unit- 14, zone - 5

CTN :42707446

21 Nov, 2025 NA

Tiruvallur - Tamil Nadu

Tender For tender for supply of mt spares c c - lv7/tata/17672-03-000 filter fuel , lv7/tata/2573-2910-0159 major repair kit for m/cyl , lv7/tata/2786-5010-5832 rubber hose , lv7/tata/2654-7230-0125 assy outer handle rh , lv7/tata/t065-6000-0126 cartridge lub. oil filter , lv7/tata/4720-014597 hose , lv7/tata/2540-008747 arm windshield wiper , lv7/tata/2050-4030-0102 assy spare wheel lifting unit

Central Government/Public Sector

CTN :42687947

28 Nov, 2025 NA

Kapurthala - Punjab

Tender For supply of hydraulic scissor lift table. manually operated, capacity - 800-1000 kgs, lifting height max. - 1500-1700 mm. platfrom size- 1200 x 610 x 60 mm. table height min. - 450 to 475 mm. four heavy duty pu wheels ( two fix & two 360 degree rotating). paint - powder coated. handle height - 1000 mm. mechanism - hydraulic lifting. make - helix engineers model no - he-031 or shreeji enterprise model no se-134 or similar. work test certificate from manufacturer with each unit must be provided by the supplier.

State Government

CTN :42615958

24 Nov, 2025 46.00 Lacs

Thiruvananthapuram - Kerala

Tender For tender for supply of sitc of precision ac and ducted ac after dismantling old ducted ac and server room ac : :--precision ac unit supply of minimum 30kw total cooling capacity floor mounted top discharge air cooled dx type precision air conditioning unit with air flow rate not less than 4500 cfm and sensible heat ratio (shr) above 90 percent , supply of material for the connection and installation of precision as per the schedule enclosed , installation testing and commissioning of units including sequencing of units , lifting shifting and positioning of new units , minor civil works for copper pipe entry by opening wall section and closing with normal plastering and fire rated painting and raised floor tile cutting , dismantling and buy back of old 2 nos of 5.5 tr voltas ductable ac

CTN :42635540

17 Nov, 2025 NA

Calcutta - West Bengal

Tender For supply of lv7 tata 000-585-0088j chassis record bag , lv7 tata 2786-2099-9972 pump water , lv7 tata 43 1-43 2344-3831 2c delivery hose canvas 38mmx 30mm with mal , lv7 tata 12281-889-010 gasket cylinder head , lv7 tata 2547-092-0127 assy wheel chock , lv7 tata 215454601605 wiring harness main , lv7 tata 2050-40300102 assy spare wheel lifting unit , lv7 tata 2786-20999914 pump water , lv7 tata 2530-017876 cylinder assy pneumatic brake wheel , lv7 tata 17672-03-000 filter fuel , lv7 tata 885430010007 filter fuel

CTN :42555175

13 Nov, 2025 2.00 Crore

Bhopal - Madhya Pradesh

Tender For e tender for supply of rehab and training unit equipment 2025 second call - "upper body trainer• machine should offer exercise for upper body (shoulder, arms, and elbow).• machine to offer bi-directional resistance.• user progress should be displaced precisely with incremental reading of 0.1• walk through design to enable user to get on to machine with ease.• detachable seat should be available.• range of movement by adjustable arm handles to target different muscle group exercises.• removable/ adjustable handles. with 19 deg from vertical plane to offer correct biomechanics.• high density seat with 360 deg rotatable swivel design, adjustable height, adjustable back rest upto 20deg minimum.• touch screen display with all readouts. • 3 speed fan on display to add comfort.• resistance 180 levels(min) with 0.2(min) increment for providing precise resistance. • numeric data entry.• low resistance with minimum 175 resistance setting.• programs such as quick start, iso-strength, heart rate, bi-directional resistance etc. • machine should be tuned to adjust workout load/rpm automatically to achieve desired level of intensity/workout.• machine should be self-powered, along with ac adopter. " , "total body trainer• machine should offer exercise for total body (shoulder, arms, and elbow& lower body- leg exercises).• machine to offer bi-directional resistance.• user progress should be displaced precisely with incremental reading of 0.1• walk through design to enable user to get on to machine with ease.• detachable seat should be available.• range of movement by adjustable arm handles to target different muscle group exercises.• removable/ adjustable handles. with 19 deg from vertical plane to offer correct biomechanics.• high density seat with 360 deg rotatable swivel design, adjustable height, adjustable back rest upto 20deg minimum.• touch screen display with all readouts. • 3 speed fan on display to add comfort.• resistance 180 levels(min) with 0.2(min) increment for providing precise resistance. • numeric data entry.• low resistance with minimum 175 resistance setting.• programs such as quick start, iso-strength, heart rate, bi-directional resistance etc. • machine should be tuned to adjust workout load/rpm automatically to achieve desired level of intensity/workout.• machine should be self-powered, along with ac adopter. " , "stability trainer• machine should offer exercise for lateral motion strengthening exercises.• machine to offer bi-directional circular motion.• user progress should be displaced precisely with incremental reading of 0.1• walk through design to enable user to get on to machine without lifting leg.• detachable seat should be available.• high density seat with 360 deg rotatable swivel design, adjustable height, adjustable back rest upto 20deg minimum.• touch screen display with all readouts. • 3 speed fan on display to add comfort.• resistance 180 levels(min) with 0.2(min) increment for providing precise resistance. • numeric data entry.• low resistance with minimum 175 resistance setting.• programs such as quick start, iso-strength, heart rate, bi-directional resistance etc. • machine should be tuned to adjust workout load/rpm automatically to achieve desired level of intensity/workout.• machine should be self-powered, along with ac adopter. " , "gait trainer with recumbent elliptical exercies• machine should offer exercise for knee movement for improving gait training & total body • machine to offer bi-directional resistance.• user progress should be displayed precisely.• range of movement with arm handles to target upper body muscle group, dual position handles.• high density seat with 360 deg rotatable swivel seat design.• touch screen display with all readouts. • 3 speed fan on display to add comfort.• resistance 180 levels(min) with 0.2(min) increment for providing precise resistance. • numeric data entry.• low resistance with minimum 175 resistance setting.• programs such as quick start, iso-

Magnetic Lifter Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

Central Government And Public Sector

Corporations / Associations / Others

Central Government/Public Sector

State Government