Latest magnetic resonance imaging equipment Tenders | Government magnetic resonance imaging equipment Tenders

State Government

CTN :43069554

23 Dec, 2025 NA

Gwalior - Madhya Pradesh

Tender For corrigendum : enquiry for equipment painting of (cb/ct/pt/station x-mer) at 220kv s/s gwalior (mahalgaon) under testing dn-2 mpptcl gwalior.

State Government

CTN :43096116

19 Dec, 2025 9.68 Lacs

Azamgarh - Uttar Pradesh

Tender For corrigendum : tender for supply of equipment/ replacement/ overhauling of defective ct-pt combined unit at consumer premises under various divisions in respect of op circle hpsebl dalhousie.

CTN :43140429

25 Dec, 2025 34.90 Lacs

Khetri - Rajasthan

Tender For - arc of electrical material. - electrical work :, providing & fixing of ik08, ip 66 protected led street light luminaire on existing bracket/pole. fixture made of powder coated single piece pressure die cast aluminum material with heat dissipation fins on housing with uv stabilized pc (uv stablization report submitted for uv cover ) /toughened glass cover and secondary lens on each led & should be smd type of 3 to 5 watt each . the system efficacy >=125 lm/ wt and potted driver & has a unique bis r number with input voltage ac 120 to 270 v ac with high voltage cutoff @>=300 v ac and auto resetting safety , power factor >0.95 driver efficiency >85% ,thd(i) 10% humidity 10% to 90% rh working temp -5c to 45c . driver current 750ma. the luminaire shall be bis certified and trade mark certified. life expectancy equal or more than 50000 burning hrs with minimum 70% lumen maintened , cri >70 and cct 5700k +355k. surge protection shall be min 4 kv internal and min 10 kv external inside driver compartment. driver should be phase to phase protection of 440 v for 4 hrs. manufactures word mark/name engraved/embossing on die cast housing to allow traceability/authenticity. fixture shall be as per is 10322 complianced.oem must have its own in house nabl lab setup for all testing facilities for led fixtures. (lm79/lm80) certificate/ report with liable warranty of product/accessories from oem shall be submitted. all as per pre approved by engineer in-charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . led street light fixture with minimum lumen output 5600 lm, supplying and drawing of xlpe insulated lt aerial bunched aluminium conductor cable confirming to is 14255/1995 and is 398 (pt-4)/ 1994 and as per discom specs. on existing cross arms through i hook with all necessary t&p required including binding and twisting etc. complete in all respect as required. all as per pre approved by engineer in-charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 1 x 25 sq. mm. + 1x25 sq. mm. (insulated), supply and fixing of 11 kv pin insulator confirming to is:731:1971 with latest ammendment on existing bracket including all accessories like ms forged hot dipped gi pin confirming to is 2486(part-i)/1993 & is:2486 (part-ii)/1989 with latest amendment, and as per latest discom specs. etc. as required. all as per pre approved by engineer in-charge.for additional technical parameters of product / work refer annexure a attached with this bsr, sitc of ip-42 and general construction confirming to is:8623 : 1993, wall/ free standing floor mounted dust and vermin proof compartmentalised cubical panel as specifications and other parameters required as per point (a) ,(b), (c),(d), (e), (f), (g), (h) as below:-(a)thickness of crca sheet shall be 2.0 mm, cable alley compartments having concealed hinged type doors with key type lock with / without detachable extension type structure. removable 3 mm. thick sheet steel gland plates with appropriate size of knockouts for cables shall be provided(b)complete panel shall undergo a process of degreasing, water rinsing, activation, derusting, pickling in acid bath, phosphatising & shall be subjected to nine tank process and then powder coated with approved shade of minimum 70 microns on both side of panel. the panel having pe foam/ neoprene rubber gasket of not less than 3mm thickness ,required hardware , concealed hinged door with key type locking arrangement for equipment/switchgear earthed with 2.5 sq.mm braided copper wire.[c) interconnection between bus bar and switchgears /cable shall be rigidly supported and made out by flexible copper wires (up to 63 amp ) and by solid bus bar (>63 amp ) . control wiring will be carried out with 1.5 sq.mm, earth wire with 2.5 sq.mm and ct with 2.5 sq.mm flexible copper wire only. all joints / interconnections of copper bus bar shall be dully tinned . c

Central Government/Public Sector

CTN :43146573

26 Dec, 2025 87.48 Lacs

Korba - Chhattisgarh

Tender For supply of spares for mineline make lt equipment acb lt starter and geb c c > f> f - 310a_400a 11_01_00d_acb , earth leakage relay 50_750ma with time lag with cbct elm7lat s_80m_lt starter , pilot relay pru3_lt starter , potential transformer 80va ds1_lt starter , on delay timer 135_30_on_lt starter , isolator on_off_rev, 300a k4r_lt starter , aux relay 220v ac coi 3co base boen3r_lt starter , current transformer for ol 15va 120_75_5_15_lt starter , current transformer lat100_15_lt starter , switch module 133ml200a_lt starter , thermal ol relay ctr 75_5 range 30_75a 122_t_30_75_lt starter , thermal ol relay ctr 120_5 range 40_120a 122_t_48_120_lt starter , on_off isolator k3r_lt starter , islator on_off_rev 100a k5r_lt starter , thermal o_l relay ctr 30_5 range 10_30a 122_t_10_30_lt starter , potential transformer ds_lt starter , switch module 133ml110a_lt starter , switch module 133ml300a_lt starter , thermal ol relay ctr 50_5 range 20_50a 122_t_20_50_lt starter , push button with spindle pb11_pbsl_lt starter , multi pilot relay mpru5_lt starter , hrc power fuse 138_315a_lt starter , current transformer for ol 15va 120_30_5_15_lt starter , sensitive earth leakage relay 50_300ma with variable time lag elm10_lt starter , core balance transformercbt70m_lt starter , isolator on_off 100a k5 _lt starter , off delay timer bota2dt2_lt starter , control plate complete assy dol_22ml_cp_lt starter , isolator k3 on_off 05_00_00_lt starter , isolator k4rs_lt starter , resistance 139_geb_gate end box , earth leakage test push button element boes2_gate end box , pilot relay pru3_gate end box , thermal overload assembly12_00_21_gate end box , potential transformer 80va ds1_gate end box , earth leakge relay 50_750ma with time lag with cbct elm7lat s_80m_gate end box , on_off_rev isolator 300a k4r_gate end box , restrained type plug and socket complete 01_00_00_gate end box , control plate chassis assy_suitable assy_sdl_lhd geb with all components and wiring_gebconrl_gate end box , electronic short circuit relay bompro100_gate end box , single phasing preventor with module spp5cmsp_gate end box , overload shotr circuit relay type_cmsmpm boosr_gate end box , pilot relay pru3_pru11_gate end box mineline acb shunt trip coils 11.09.03, mineline acb overload assembly - breaker 30a -100a 11.01.00a, mineline acb no volt coil under voltage coil assy.11.04.00a, mineline acb overload assembly - breaker 110a - 200a 11.01.00b, mineline acb comp;t con wiring circuit breaker for 100a complete assy. wr1, mineline acb earth leakage relay 50-750ma time lag cbct elm7lat(s)-80m, mineline acb ct for o/l lat100/5, mineline acb ct for ol lat200/5, mineline acb potential transformer part no ds, mineline acb moving contact assy. for breaker 300 amps 11.02.00, mineline acb overload assembly - breaker 210a -300a 11.01.00c, mineline acb isolator assembly k3 on/off 05.00.00, mineline acb circuit breaker up to 400a wiring assembly wr-2a, mineline acb fixed contact assembly for breaker 11.06.00, mineline acb ct for o/l lat400/5, mineline acb ct for o/l lat300/5, mineline acb brass cone & gland assembly bobcg, mineline acb moving contact for breaker, upto 200a 11.02.06, mineline acb main spring 11.05.10, mineline acb fixed contact assembly for isolator 300a 05.30.04.00, mineline acb potential transformer, 80 va part no ds1, mineline acb brass terminal with insulator dmc part no t10, mineline acb shunt trip assembly complete 11.03.00, mineline acb fixed contact for breaker //bid details 2 / 63

State Government

CTN :43095087

16 Dec, 2025 10.07 Lacs

Meerut - Uttar Pradesh

Tender For providing of testing service for on-board /commissioned equipment/ instrument related to plant - electrical; partial discharge test of 220 and 132 kv ct; any other government approved labs /service providers

State Government

CTN :43058112

06 Jan, 2026 8.93 Lacs

Jalpaiguri - West Bengal

Tender For erection and commissioning of 33 kv cr panel, 33 kv vcb and ct (equipment), cable laying, switchyard painting, earthing of switchyard at pandapara 33/11 kv sub-station under jalpaiguri division.

CTN :40325341

16 Dec, 2025 1.33 Crore

Shajapur - Madhya Pradesh

Tender For corrigendum : engagement of outsourcing agency for testing of metering equipment (ct pt) and meter installed at the premises of various renewable energy (re) generators of indore and ujjain regions of mppkvvcl, indore other than agar and shajapur circles.

Central Government/Public Sector

CTN :42153540

31 Dec, 2025 NA

Duliajan - Assam

Tender For expression of interest with all documentary evidence for the items- crome casing pipes , chrome tubing pipes , drill pipes , heavy weight drill pipe , drill collars and lifting plug , drilling stabilizers , drilling/ workover handling tools --- elevators, tongs, , slips etc. , potassium formate , solid control equipment --- mud cleaner/ degasser/ , centrifuge/ linear motion shale shaker , "sucker rod pump (srp) and its accessories:tubing conveyed sucker rod downhole pump rod conveyed sucker rod downhole pump downhole gas separator downhole anchor catcher" , , , , srp insert pump , ethyl mercaptan , low shear velocity fluids/polymers , emd chemical dosing pump, reciprocating pump , hsp 20/40, isp 20/40, isp 30/50 mesh , pig tracker/transmitter , pipeline locator , logging cables , tri cone roller drilling bits of various sizes , 11"od standard reverse circulating junk basket & 7.7/8" od reverse circulating junk basket , pdc drill bits of various sizes , fishing tool; 6.5/8 inches od junk sub for operation inside 8.1/2 inches hole , impression block for 4.5 inch od, 5.0 inch od, 9.625 inch od & 13.375 inch od casing , pneumatic spinner , 5.1/ 2" premium threaded casing (grade: n80 & grade p110) , cased hole logging units with tools and accessories along with installation, commissioning and training , wireline mast unit, including training and installation& commissioning , oil well explosives: (i) 2-1/8 inch tubing cutter along with detonator and hardware accessories , ii) 1-9/16 inch tubing puncher/ circulation charge & hardware accessories , oil well explosives: explosives for baker pressure setting tools: power charge, primary ignitor & secondary ignitor , procurement of oil well explosives used in exploration and production of hydrocarbon , 27.1/2" (698.50 mm) rotary table , 7.1/16" x 10 m double ram bop with accessories , 13.5/8" x 10 m single ram bop with accessories , 3.1/16" x 10 m flexible steel hoses for choke manifold , 3.1/8" x 5 m flexible steel hoses for choke manifold , 2.1/16" x 5m - ss flexible steel hose 3.1/16" x 10m - ss flexible steel hose , 3.1/8" x 5m flexible steel hoses , thermal wellheads for 7" and 9.5/8" casing completion with installation & commissioning , hose vibrator , rotary hose, drilling in assorted length , 2.34 mm (0.092") piano wireline (well measuring line) , static gel strength analyzer , electronic reservoir pressure and temperature measuring gauge. , automatic distillation apparatus , ft ir spectrophotometer , rheometer , 350 short ton drilling hook & elevator links (250 short ton, 350 short ton and 500 short ton) , digital acoustic liquid level measuring cum dynamometer equipment (echometer) , cross over, premium box x api eue & pup-joint, 2.7/8", premium in assorted length , geological thin section preparation unit comprising of cutting, vacuum impregnation, grinding and polishing equipment and consumables. , polarised microscope , pony drill collar , premium tubing , 37.1/2 rotary table , air gas permeameter , double block and bleed isolation plug , gas chromatograph , low to moderate temperature cement retarder , high temperature fluid loss control cement additive , xcd-polymer , xc-polymer (premium) , poly anionic cellulose-regular , poly anionic cellulose-super lo , junk sub 5.1/2 inch & 7 inch , 13.5/8-inch x 10000 psi annular bop , 13.5/8-inch x 10000 psi double ram bop. , ct reels , super fishing jar , drilling jar , overshots , slammer logging cables , 3 left hand kelly , multi element analyzer , high performance ep lube , mercury free pvt system , surface memory gauge , accessories of logging cable , downhole pressure temperature gauge , real time kinematic differential global positioning system , flow assurance software , seismic survey designing and modelling software , low to moderate temperature fluid loss control cement additive , high temperature cement retarder , cement friction reducer , isotope ratio mass spectrometer , fishing t

Magnetic Resonance Imaging Equipment Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

Central Government/Public Sector

State Government

State Government

Central Government/Public Sector