Web Analytics Made Easy - StatCounter

Magnetic Rotor Tenders

Get complete information related to latest Magnetic Rotor Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Magnetic Rotor Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Magnetic Rotor Tenders .

Filter
Loading....
Loading....
Loading....
Loading....
Loading....

Bid Submission Date Range
Tender Value

State Government

CTN :41272784 Due date: 12 Aug, 202512 Aug, 2025 4.99 Lacs
Tender For (sh- replacement of centrifugal pumping set 50 hp of lift water supply scheme mandhala-ii both pump and motor with allied accessories).

CTN :41275251 Due date: 21 Aug, 202521 Aug, 2025 NA
Tender For tender for supply of sw pump centrifugal type-sn 23 without motor and starter , sw pump centrifugal type -40 by 15 without motor and starter , type testing charges (if any) , not required , not required

CTN :39038232 Due date: 22 Aug, 202522 Aug, 2025 13.18 Crore
Tender For corrigendum : supply of goods, tools & equipmentforan international standard itotin mechanic motor vehicle (mmv) tradeat iti tarsali, gujarat, india (package 3: mmv trade) - alternator assembly used for lmv working condition demonstration kit , starter motor assembly used for lmv working condition demonstration kit , electronic engine control module , fuel pump for mpfi working condition demonstration kit , inline fuel injection pump and rotor type fuel injection pump , demonstration board of 2wheeler ignition system. , demonstration board of electronic ignition system. , working condition of petrol mpfi engine assembly with fault simulation board , mpfi petrol engine with swiveling stand along with special tools for dismantling and assembling , demonstration board of mpfi system , ultrasonic injection cleaning equipment , working model of power windows , petrol engine motorcycle/scooter along with special tools and accessories , four stroke multi cylinder diesel engine in working condition , four stroke four cylinder crdi diesel engine in working condition , functional/experiment model of different type of sensors. , auto electrical test bench , cut section model of mock layout of a motor car -electrical system - working model , cut section working model of single plate clutch assembly. , cut section working model of diaphragm clutch assembly. , cut section working model of centrifugal clutch assembly. , front axle ( rezeppa joint) with stand for dismantling and assembly , rear axle with stand for dismantling and assembly , cut section model of synchronous gear box working , cut section model of sliding mesh gearbox working , cut section model of constant mesh gearbox working , full floating axle and semi- floating axle assembly , cut section working model of automatic transmission gear box , steering assembly - , 1. rack& pinion, , 2. worm& roller , 3. recirculating ball , 4. power steering , wheel alignment set up instrument-computerized , brake testing equipment (to test efficiency of vehicle where motion after braking is plotted) , motor vehicle in running condition (diesel heavy) with hydraulic power steering , light motor vehicle diesel crdi with electronic power steering and car a/c , engine dynamometer , four stroke multi cylinder engine mpfi petrol with cng kit set up in running condition , four cylinder four stroke diesel engine test rig with rope brake dynamometer , exhaust gas analyzer - diesel , training setup for adas systems , 4-wheel alignment set & hoist with advanced driver assistance systems (adas) complete frame targets , steel toolbox with lock and key (folding type) , punch letter , outside micrometer (0 – 25) , outside micrometer (25 – 50) , outside micrometer (50-75) , outside micrometer (75-100) , inside micrometer (25-50) , depth micrometer (0-25) , thread micrometer , adjustable micrometer sprit level to measure flatness, indication and taper with prismatic measuring base , vernier caliper , digital vernier caliper , vernier depth gauge , vernier bevel protractor, least count 5minutes , telescope gauge , dial test indicator plunger type (complete with clamping devices and stand) , universal surface gauge , cylinder bore gauge , compression testing gauge suitable for petrol engine. , vacuum gauge , granite surface plate , work bench , spanners socket with speed handle, t-bar, ratchet and universal , magneto spanner set , cylinder ridge cutter , vice grip pliers , torque wrenches , pneumatic tools set , car jet washer , pipe flaring tool , pipe cutting tool , universal puller for removing pulleys, bearings , stud extractor set of 3 , stud remover with socket handle , paraffin pressure gun , hand reamers adjustable , straight edge gauge , straight edge gauge , ladle , electric soldering iron , wire gauge (metric) , digital multi meter, 3 % digit (min), diode test mode and continuity mode, , growler , hydrometer , battery analyzer with printer , carburetor - solex, mikuni for dismantling

CTN :41259461 Due date: 07 Aug, 202507 Aug, 2025 1.37 Lacs
Tender For supplying, installation, testing and commissioning of 2hp 3phase mono bloc centrifugal pump motor set at new alipore po under south kolkata dn.

CTN :41281174 Due date: 18 Aug, 202518 Aug, 2025 NA
Tender For supply of vertical inline multistage centrifugal pump, type:- cr10-10-a-fj-a-v-hqqv model no. a9650 1320p10812 rated flow: - 10 m3/hour rated head:- 81.6 meter maximum rated head :- 102 meter motor ro tation : counter clockwise(ccw) make: grundfos make or equivalent in all respect, specifications in other br and/make. [ warranty period: 12 months after the date of delivery ]

CTN :41025482 Due date: 16 Aug, 202516 Aug, 2025 NA
Tender For corrigendum : supply of centrifugal pump with motor

Central Government/Public Sector

CTN :40606432 Due date: 02 Aug, 202502 Aug, 2025 NA
Tender For bid to ras corrigendum : supply of vertical inline centrifugal type pump-motor set (45m head & 4500 lpm) for cooling water system as pe , set of spares as mentioned in table-2 of purchase specification ht00264 rev" 02" .

State Government

CTN :41218140 Due date: 31 Jul, 202531 Jul, 2025 NA
Tender For running and maintenance of wss garthara khanni jhikli in tehsil nurpur district kangra hp. (sh: repair of 30 hp centrifugal pump set no. 1 and providing and fixing of motor bearing set no. 1 & 2, providing & fixing of thrust bearing, roller bearings etc).

State Government

CTN :41234048 Due date: 04 Aug, 202504 Aug, 2025 NA
Tender For quotation for rate of c/f pump (clear water) and its accessories at saraswatipur rwss - supplying ,installation and commissioning of multi stage/ horizontal split casing/multi stage centrifugal pump (make: kirloskar / wpil/jyoti/ mather & platt) rating-15 kw/20hp as per is:5120, capable for discharging 72 m3/hr against a head of 40 m , consisting of bronze impellers, stainless steel pump shaft, etc. with all accessories coupled with energy efficient (ie3) tefc squirrel cage induction motor confirming to is:325 and is:12615, having 15% more bhp than that of pump, operating on 1500rpm, 415v, 3 ph, 50 hz [make: kirloskar /abb/cgl/bhel] all complete with required size of sluice valve and cidf non- return valve standard fitting, strainers, reducer, foot valve, pressure gauge, nuts & bolts, packings, fitting & fixing, labour & technician, etc. all complete job as per site requirement and direction of e/i. discharging -72 m3/hr and head - 40m (1w + 1s) 20 hp, cost towards making new foundation base for pump -motor set and panel including providing new ms base plate as per sample suitable for 20 hp pump- motor set, cutting and welding where necessary, nuts, bolts, flange etc with all labour, tools and materials all complete job., cost towards making suitable suction line by suppling of ms pipe, bend, flange, nut, bolt rubber insertion, including making hole for suction, cutting, welding etc all complete., cost towards making suitable delivery line by suppling of ms pipe, bend, flange, nut, bolt rubber insertion including joining the new suction line to the existing header by means of cutting, welding etc all complete., providing , erecting and commissioning lt motor control panel board fabricated with ms sheet and painted, dust-vermin proof. floor mounted cubical panel board shall be consisting of proper power distribution 100 a copper busbar- 4 pole, 1 no. 100 a mccb as incoming feeder and 2 nos. 63a mccb as outgoing feeders for motors, 1 no. 63 a mccb as spare feeder (for motor), 2 no. 32a mcb for lighting and other loads. including selector switches, switch disconnector isolator, voltmeters, ampere meters, mfm, indicator lamps, internal wiring, danger board, protection units & relay, capacitor banks/apfc and 02 nos suitable fasd starter, etc. all complete and as per is and direction of e/i .), supplying and erecting 16 sqmm 3 core xlpe / pvc insulated, 1100 v grade un-armoured copper cable with isi mark stranded / solid copper conductor complete erected on wall / panel or in provided trench in an approved manner. (from panel to motors), providing and erecting chemical earthing with all required materials etc all complete., cost of 3t triple type chain pully block suitable as below with 6m lift complete with laoad chain and hand chain suitable for avove lift, tested 50% over load as per is 3832 carry isi etc. all complete job as per the site requirement and indian standard., cost towards dismanteling of old pump set and foundation and making arrangements for removal of debries from the pump house., construction of chamber for 100mm sluices valve.

State Government

CTN :41234055 Due date: 04 Aug, 202504 Aug, 2025 NA
Tender For quotation for rate of items of c/f pump(clear water) and its accessories at gumuria rwss - supplying ,installation and commissioning of multi stage/ horizontal split casing/multi stage centrifugal pump (make: kirloskar / wpil/jyoti/ mather & platt) rating-40hp as per is:5120, capable for discharging 30 m3/hr against a head of 101 m , consisting of bronze impellers, stainless steel pump shaft, etc. with all accessories coupled with energy efficient (ie3) tefc squirrel cage induction motor confirming to is:325 and is:12615, having 15% more bhp than that of pump, operating on 1500rpm, 415v, 3 ph, 50 hz [make: kirloskar /abb/cgl/bhel] all complete with required size of sluice valve and cidf non- return valve standard fitting, strainers, reducer, foot valve, pressure gauge, ms delivery & suction pipe, common header, nuts & bolts, packings, fitting & fixing, labour & technician, etc. all complete job as per site requirement and direction of e/i. discharging -30 m3/hr and head - 101 m (1w + 1s) 40 hp, cost towards making new foundation base for pump -motor set and panel including providing new ms base plate as per sample suitable for 40 hp pump- motor set, cutting and welding where necessary, nuts, bolts, flange etc with all labour, tools and materials all complete job., cost towards making suitable suction line by suppling of ms pipe, bend, flange, nut, bolt rubber insertion, including making hole for suction, cutting, welding etc all complete., cost towards making suitable delivery line by suppling of ms pipe, bend, flange, nut, bolt rubber insertion including joining the new suction line to the existing header by means of cutting, welding etc all complete., providing , erecting and commissioning lt motor control panel board fabricated with ms sheet and painted, dust-vermin proof. floor mounted cubical panel board shall be consisting of proper power distribution 200 a copper busbar- 4 pole, 1 no. 160 a mccb as incoming feeder and 2 nos. 100 a mccb as outgoing feeders for motors, 1 no. 100 a mccb as spare feeder (for motor), 2 no. 32a mcb for lighting and other loads. including selector switches, switch disconnector isolator, voltmeters, ampere meters, mfm, indicator lamps, internal wiring, danger board, protection units & relay, capacitor banks/apfc and 02 nos suitable fasd starter, etc. all complete and as per is and direction of e/i ., supplying and erecting 25 sqmm xlpe / pvc insulated, 1100 v grade un-armoured copper cable with isi mark stranded / solid copper conductor complete erected on wall / panel or in provided trench in an approved manner. (from panel to motors)., providing and erecting chemical earthing with all required materials etc all complete., cost of 3t triple type chain pully block suitable as below with 6m lift complete with laoad chain and hand chain suitable for avove lift, tested 50% over load as per is 3832 carry isi etc. all complete job as per the site requirement and indian standard., cost towards dismanteling of old pump set and foundation and making arrangements for removal of debries from the pump house.
 Loading, Please wait...

Connect us via What's Up