Get complete information related to latest Magnetic Spares Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Magnetic Spares Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Magnetic Spares Tenders.
Tender For corrigendum : supply of readymade fabricated steeli tems - tapping angle, 4 feet, 11 kv v-cross arm, guy set, s. s. set (11 pieces per t/c), guarding angle, 4 feet, d-clamp
Tender For stage contract for material supply store fy 2025-26 or till next stage gets finalized - 11 kv porcelain pin insulators conforming to relevant is 731, 11 kv composite polymer pin insulators conforming to relevant iec 61109, galvanized pins suitable for 11 kv pin insulators. (weight not less than 0.8 kg including nuts and washers), 11 kv disc. insulators (45 kn) conforming to is 731 complete with fittings suitable upto 0.1 acsr., 11 kv polymer disc. insulators (45 kn) conforming to iec 61109 complete with fittings suitable upto 0.1 acsr., g.i. wire 8 swg of standard quality of relevant is., gulvanised guy wire 7/14 swg of relevant is, 11 kv guy insulator confrming to is 5300., drop out fuse set on post type 11 kv pin inulators mounted on ismc- 75 (600mm long), almn. solderless clamps complete with nuts and bolts. 400 amp. suitable for 12mm bush rods., almn. solderless clamps complete with nuts and bolts. 600 amp. suitalbe for 19mm bush rods, almn. solderless t clamps complete with nuts and bolts. 400-600 amp. suitalbe for 12 to 19 mm bush rods, moulded case circuit breaker (mccb make ligrand, havells, merlin, l&t) 415 v/1100v, 3 phase, 35 ka enclosed in sheet cabinet, power coated complete with bus bars, locking arrangement etc including collars (2 nos) of 50x6mm flat iron mounting on st poles:- 100 amp., moulded case circuit breaker (mccb make ligrand, havells, merlin, l&t) 415 v/1100v, 3 phase, 35 ka enclosed in sheet cabinet, power coated complete with bus bars, locking arrangement etc including collars (2 nos) of 50x6mm flat iron mounting on st poles:- 160 amp., moulded case circuit breaker (mccb make ligrand, havells, merlin, l&t) 415 v/1100v, 3 phase, 35 ka enclosed in sheet cabinet, power coated complete with bus bars, locking arrangement etc including collars (2 nos) of 50x6mm flat iron mounting on st poles:-250 amp., moulded case circuit breaker (mccb make ligrand, havells, merlin, l&t) 415 v/1100v, 3 phase, 35 ka enclosed in sheet cabinet, power coated complete with bus bars, locking arrangement etc including collars (2 nos) of 50x6mm flat iron mounting on st poles:- 400 amp., almn. thimbles of dowells 3-d make:- 400 sq. mm, almn. thimbles of dowells 3-d make:- 300 sq. mm, almn. thimbles of dowells 3-d make:- 185 sq. mm, almn. thimbles of dowells 3-d make:- 120 sq. mm, almn. thimbles of dowells 3-d make:- 95 sq. mm, lt shackle insulators conforming to relevant is 1445., gi d-clamps for lt shakle insulators of flat iron 30x4mm duly fabricated., 11 kv gang operated switch with drop out set (including 12 post type insulators heavy duty) with fittings complete of ismc-75 (galvanised) including operation rod mechnisim, lt guy insulators conforming to is 5300., 11 kv lighting arrester set (station type) complete fittings conforming to relevant is, 11 kv lighting arrester set (line type)complete fittings conforming to relevant is, guy rod 16mm dia iron rod 1.5 mtr long duly galvinized with 12" length threaded at one end including two nutts and bolts with 1x1 base plate 5mm thick, almn. paint (nerolac, berger make), red oxide paint (nerolac, berger make), lt separators:- 1 phase 2 wire, lt separators:- 2 phase 3 wire, lt separators:- 3 pahse 4 wire, painting brush 3", lt fuse set (3 phase) 400 a consisting of 6 no almn. connectors (75x10mm flat l-shaped al bus) installed on polymer 11kv post insulator mounted on ci frame (75x40x6mm) of size 790mm complete with collars (50x6mm) flat iron for mounting on st poles design details as per drawing ce/p&p/drg/2023/ltfs/001dated 24-01-2023., gi channel iron x-arms of ismc 100 (9.2 kg/mt) 4 to 9 long, duly fabricated ., gi channel iron x-arms of ismc 75 (6.80 kg/mt) 4 to 9 long, duly fabricated., gi channel iron v-cross arms of ismc 75 (6.80 kg/mt) as per rec specifications duly fabricated., gi angle iron braces of 50x50x6mm angle (4.5 kg/mt 3 to 9 long duly fabricated., gi angle iron braces of 45x45x4/5mm angle (4.5 kg/mt 3 to 20 long duly fabricated., gi lt bracket
Tender For corrigendum : supply of spares/ stores/t&p/equipments/hardware items required from time to time for day to day operation/ maintenance/construction of power sub-transmission network of this division during the financial year 2025-26 or till the next rate contract - disc insulator 70kn b&s type, anti fog (reputed make/ already use in pdd), 33kv single tension disc fittings [3 bolts] suitable for dog conductor suitable for b&s 70kn disc insulators, 33kv pin insulators (porcelain) 70kn, 33kv g.i. pins (heavy duty), 11kv, 3 core cable kits [heat & shrinkable], a. indoor type, i) 600 mm. sq.single core, i. 400 mm sq., ii. 300 mm sq., iii. 240 mm sq, iv. 185 mm sq, b. outdoor type, i) 600 mm. sq.single core, i. 400 mm sq, ii. 300 mm sq, iii. 240 mm sq, iv. 185 mm sq, 11kv link set [heavy duty] 50*6 mm ( clamping suitable for dog conductor), 11kv l.a [station type]reputed make, 11kv l.a [line type] reputed make, guy wire 7/3.15mm, 33kv guy insulators, manila rope, i) 3/4 inch dia, ii) 1 inch dia, p.p.rope 3/4 dia, m.s. nut & bolts of sizes, i. 3" (full thread), ii. 6" (half thread), iii. 9" (half thread), iv. 10" (half thread), nuts and bolts brass, cork sheet 8mm, aluminum thimbles of sizes, i. 400mm sq, ii. 300mm sq, iii. 240mm sq, iv. 185mm sq, v. 120mm sq, drill bit [heavy duty], i. 16mm dia, ii. 19mm dia, iii.26mm dia, p.g clamps, i) suitable for panther conductor, ii) suitable for dog conductor, p.i clamps [suitable for dog conductor/panther], t clamps [suitable for dog conductor,panther ], brass bush rods of 33/11kv power transformer of sizes, i. hv [m20], ii. lv [m20], 33kv porcelain bushes of 33/11kv power transformer of sizes, i. hv side, ii. lv side, 3 core 11kv xlpe cable, i) 600 mm. sq., i. 400mm sq, ii. 300mm sq, iii. 240mm sq, iv. 185mm sq, v. 120mm sq, copper strip 20x3mm, vacuum interrupter suitable for, i. 11kv (yamuna] breaker, ii. 11kv [pascal] breaker, iii. 11kv (stelmec] breaker, iv. 11kv [schneider] breaker, iv. 11kv [electrifield make]breaker, aluminum bus bar 75x10mm, duck back shoes of different sizes, red oxide enamel paint (asian, nerolac/ berger), al. paint (asian, nerolac/ berger), 1.1kv voltage grade 2.5mm2 copper conductor, pvc insulated control cable conforming to is: 1554-1998, i. 2 core, ii. 4 core, iii. 5 core, iv) 8 core, iv. 10 core, v) 12core, 33kv current transformer of ratio, i. 750/375/5-5-5a, ii. 600/300/5-5-5a, iii. 400/200/5-5-5a, 33kv lightning arrestor [station type] reputed make, 33kv isolators with earthing blade, insulating hand gloves make crystal etc tested for 33kv level, aluminum ladder 9mtr long (folding), bamboo ladder 20 ft long, rubber mat 1mtr x2mtr, 12mm thick, 11kv operating rods, galvanised nuts and bolts of sorts, g.i wire 8 swg, lifting pulling machine 3 ton (make power ,wolf or any standard make), g.i earthing plates 2x2x6mm, pliers (taparia or any standard make), safety vest, safety belt, safety helmet (isi marked), 33kv danger plates complete, multimeter ( standard company make motwane , waco, etc), digital ampere meter [0-200/400 amps.], male contact (crompton greaves & emi make panel), female contact (crompton greaves & eim make panel), tripping coil suitable for 30/36v dc along with plunger for allind, bieco, make breaker, relays digital for vcbs for allind, bieco, easun,electricfield make panel, earth fault relay for vcb/ocb crompton greaves & emi make panel, over current relay for crompton greaves & emi make panel, 11kv ct set for breakers, i) 400-200/5 - 5amp, ii) 600-300/5 - 5amp, iii) 750-375/5 - 5amp, welding electrodes swg 8no as per is: 814 of 2004, maintenance free battery banks 36v ,vrla bank comprising of 18nos of cell [2 volt.100ah cell each] with tray and trolley of hbl,exide or any other reputed make, battery cells 2 volt,100ah(wet cell ) exide make, battery cells 2 volt,100ah (dry cell) exide make, master trip relay b24,110/125 v dc, guy rod complete with turn buckle, straining screws, guy plate etc [20mm] for 33 kv