Latest main switch scrap Tenders | Government main switch scrap Tenders

State Government

CTN :40458322

11 Jun, 2025 NA

East Nimar - Madhya Pradesh

Tender For availing one-time services for repairing of the electronic position controller module installed in hp and lp bypass system of unit no # 3 and #4 2x660 mw sstpp mppgcl dongalia.

Corporations And Associations And Others

CTN :40459295

28 May, 2025 NA

Panipat - Haryana

Tender For i and s make valve and instrument spare - conductivity transmittermake-i&s i) lcd93x70mm, conductivity transmittermake-i&s ii) controller80 pin, conductivity transmittermake-i&s iii) main pcb, conductivity transmittermake-i&s iv)conductivity cum supply box, conductivity transmittermake-i&s v)smps 24v dc 2.2 amp, conductivity transmittermake-i&s vi)smps 12v dc 1.3 amp, conductivity transmittermake-i&s vii)push switch for timer, conductivity transmittermake-i&s viii)glass fuse 2 amp cap & fuse, conductivity electrodemake-i&s i)electrode teflon sleeve, conductivity electrodemake-i&s ii)electrode teflon cap, conductivity electrodemake-i&s iii)double acting sov port size, conductivity electrodemake-i&s iv)sov coil 24v dc, conductivity electrodemake-i&s v)cylinder piston and o ring set, conductivity electrodemake-i&s vi)sensor rod completed, continuous machine feeding panel make- i&s i)valve position indicatordav44p, continuous machine feeding panel make: i&s ii)pid controller honeywellinput:4-20maoutput:4-20maalram- 02 nos, continuous machine feeding panel make: i&s iii)toggle switchblack, yellow, green 01 each, continuous machine feeding panel make: i&s iv)current transducer0-5amp/4-20 ma pc5m-s1, continuous machine feeding panel make: i&s v)current transformer0-150amp/0-5amp, continuous machine feeding panel make: i&s vi)manual current card4-20ma, continuous machine feeding panel make: i&s vii)smps 24v dc 2.2amp, continuous machine feeding panel make: i&s viii)push switch, continuous machine feeding panel make: i&s ix)transformer0-160/10w, continuous machine feeding panel make: i&s x)transformergtr 12-0-12, continuous machine feeding panel make: i&s xi)analog isolator6230 with pcb, continuous machine feeding panel make: i&s xii)led lampred, green, yellow 01 eachmulti turn port500e, v-notch ball valve (feed control valve b cvp cell 1)size-40mmtag no: 5cv920make-i&s i) ptfe seatring set, v-notch ball valve (feed control valve b cvp cell 1)size-40mmtag no: 5cv920make-i&s ii) v ring set, v-notch ball valve (feed control valve b cvp cell 1)size-40mmtag no: 5cv920make-i&s iii)body joint gaskit, v-notch ball valve (feed control valve b cvp cell 1)size-40mmtag no: 5cv920make-i&s iv)mor, v-notch ball valve (feed control valve c cvp cell 5)size-50mmtag no: 5cv932make-i&s i)ptfe seatring set, v-notch ball valve (feed control valve c cvp cell 5)size-50mmtag no: 5cv932make-i&s ii)v ring set, v-notch ball valve (feed control valve c cvp cell 5)size-50mmtag no: 5cv932make-i&s iii)actuatotor (sr-65) seal kit, v-notch ball valve (feed control valve c cvp cell 5)size-50mmtag no: 5cv932make-i&s iv)body joint gaskit, v-notch ball valve (feed control valve c cvp cell 5)size-50mmtag no: 5cv932make-i&s vi)afr shavo 114sn, v-notch ball valve (feed control valve c cvp cell 5)size-50mmtag no: 5cv932make-i&s vii)e/p positinor isep1000l, v-notch ball valve (hot water control valve c cvp cell 2)size-25mmtag no: 5cv104make-i&s i)ptfe seatring set, v-notch ball valve (hot water control valve c cvp cell 2)size-25mmtag no: 5cv104make-i&s ii)v ring set, v-notch ball valve (hot water control valve c cvp cell 2)size-25mmtag no: 5cv104make-i&s iii)actuatotor (sr-65) seal kit, v-notch ball valve (hot water control valve c cvp cell 2)size-25mmtag no: 5cv104make-i&s iv)body joint gaskit, v-notch ball valve (hot water control valve c cvp cell 2)size-25mmtag no: 5cv104make-i&s v)mor, v-notch ball valve (hot water control valve c cvp cell 2)size-25mmtag no: 5cv104make-i&s vi)afr shavo 114sn, v-notch ball valve (hot water control valve c cvp cell 2)size-25mmtag no: 5cv104make-i&s vii)e/p positinor isep1000l, globe (milk of lime to juice defecator control)size-65mmtag no: 5cv1301make-i&s i)ptfe seat, globe (milk of lime to juice defecator control)size-65mmtag no: 5cv1301make-i&s ii)v ring set,

State Government

CTN :40398381

13 Jun, 2025 NA

Guwahati - Assam

Tender For empanelment of agencies for supply of laboratory instruments for various water testing laboratories under jal jeevan mission, assam - ion meter with electrode and accessories for fluoridemeter: ph/ise benchtop meter with electrode stable, universal power adapter, literature, pc cable, meter test certificate electrode: ionplus fluoride and nitrate combination ion selective electrode, 1m cable, waterproof bnc benchtop ion meter (ise) along with fluoride, nitrate #electrode range: -2.000 to 20.000 resolution 0.1, 0.01, 0.001 relative accuracy 0.002 calibration points up to 5 calibration editing yes #mv/ rmv orp range 2500.0 mv resolution 0.1 relative accuracy 0.2 mv or 0.05 % of reading whichever is greater eh orp mode yes ise range 0 to 19999 resolution up to 3 significant digits relative accuracy 0.2 mv or 0.05 % of reading whichever is greater units ppm, m, mg/l, %, ppb, none calibration points up to 5 calibration editing yes calibration features timed end point, linear point to point, non-linear selectable auto-blank, low concentration range stability #temperature range -5 to 105 c, 23 to 221 f resolution 0.1 relative accuracy 0.1 offset calibration 1-point datalogging memory 2000 with time and date stamp log function manual, ready (include auto-read ), timed log edit delete individual points, group of points or all inputs ph electrode bnc, reference pin atc probe 8-pin mini-din #output rs232, usb power ac adapter included universal, 100-240 vac battery power optional 4 aas battery life 800 hrs, fluoride electrode of ion metersame make that of the ion meter, manifold filtration assembly* wide range of pumps and filtration flasks * high quality components * easily exchangeable elements *maintenance-free * low noise * added filters for enhanced pump longevity * filtration base with silicon stopper, cap & aluminium clamp connecting silicon tube technical specification for filtration flask set # high-pressure resistant tube # fiberglass filter membranes (47mm / 0.1 m) # ptfe disc filter #normal liquid filtration * specification for filtration glass set #suction bottle capacity(ml) 1000 ml # filter diameter(mm) 47/50 mm # * specification for filter flask * material: statinless steel 304, capacity: 300 ml (100 ml each) [ unit should consist of 3 flask so that 3 sample can be filtered simultanelously without any issue] # effective filtration area(cm2) = 9.6 cm2, outlet connector(mm) = 8 mm * specification for vaccum flask: #flow rate of the pump(l/min) = 17 l/minultimate vacuum(mbar) = 150 mbar # oil free, maintainance free, built in thermal protection to shut off when over heated., auto cut heater for distill water plant so that when water level decreases the heater is switch off automatically, voltage stabilizer capacity- 3 kva servo stabilizer 5 star rating, heating mantle (single station) should have digital energy regulator with multiple step power regulation automatic spill detection and saftey shutdown in built precision temperature control technial specification: flask capacity 250 ml, working temp range: ambiant + 5 to 420 degree celcius. accuracy: plus minus 1.0 degree celcius, power consumption : 150 w, heating mantle (combined unit) material of construction heating block: made with grade epoxy painted chemical resistant coating, aluminum block with 6 thermo wells for processing 6 different samples at a time. #racks: ss 316 # glassware: teflon coated # temperature range ambient + 10 deg c to 450 deg c # stability of temperature better than 0.5 deg c # controller consist of digital read out of temperature and time with 4 programmable ramps for each method. # number of programmable methods 20 numbers. # heating powers 1000w # heating position minimum 6 position # digestion time range -1 to 999 minutes # the system should have facility of acoustic signal at the end of completion of cycle to notify the operator. # the thermal digestion unit should have high thermal homogeneity # the setup should have small footprint. # th

CTN :40290325

19 May, 2025 27.05 Lacs

Noida - Uttar Pradesh

Tender For sitc of vrv system - sitc of vrf conditioning units with hundred percent inverter type compressor of capacities odu five hp side discharge , sitc of vrf conditioning units with hundred percent inverter type compressor of capacities t10 hp minimum cop 4 point 5 top discharge , sitc of vrf conditioning units with hundred percent inverter type compressor of capacities 12hp minimum cop 4 point 3 top discharge , supply lifting and shifting instllation testing and commissioning of ductable type indoor unit with drain pump 6 point 4 tr , supply lifting and shifting instllation testing and commissioning of ductable type indoor unit with drain pump 8 point 0 tr , supply lifting and shifting instllation testing and commissioning of ductable type indoor unit with drain pump 4 point 0 tr , supply instllation testing and commissioning of wired remote , supply instllation testing and commissioning of branch joints , supply instllation testing and commissioning of outdoor joints , dismatleing of old outdoor and indoor units along with copper pipes 8 point 5 tr ductable 3nos 5 point 5 tr ductable 2nos , ancilliary works like making airtight partition realignment of grilles , copper piping for vrf system all pipes shall be suitable for r410a high pressure 28 point 6 mm dia pipe insulated with 19 mm thick insulation , copper piping for vrf system all pipes shall be suitable for r410a high pressure 22 point 2 mm dia pipe insulated with 19 mm thick insulation , copper piping for vrf system all pipes shall be suitable for r410a high pressure 19 point 1 mm dia pipe insulated with 19 mm thick insulation , copper piping for vrf system all pipes shall be suitable for r410a high pressure 15 point 9 mm dia pipe insulated with 13 mm thick insulation , copper piping for vrf system all pipes shall be suitable for r410a high pressure 12 point 7 mm dia pipe insulated with 13 mm thick insulation , copper piping for vrf system all pipes shall be suitable for r410a high pressure. 9.5 mm dia pipe insulated with 13 mm thick insulation , copper piping for vrf system all pipes shall be suitable for r410a high pressure 6 point 4 mm dia pipe insulated with 13 mm thick insulation , supply and installation of ms perforated cable tray with cover for exposed refrigerant copper piping 300 width x 40 depth x 1 point 6 thickness , supply and installation of ms perforated cable tray with cover for exposed refrigerant copper piping 150 width x 40 depth x 1 point 6 thickness , refrigerant r 410a to top up the system , providing and fixing in position the following pvc drain with all necessary fittings and joints quoted price shall be inclusive of 6 mm closed cell nitrile rubber pipe insulation 40 mm dia drain pipe , providing and fixing in position the following pvc drain with all necessary fittings and joints quoted price shall be inclusive of 6 mm closed cell nitrile rubber pipe insulation 32 mm dia drain pipe , providing and fixing in position the following pvc drain with all necessary fittings and joints quoted price shall be inclusive of 6 mm closed cell nitrile rubber pipe insulation 25 mm dia drain pipes , wall chiselling opening for drain and cu pipe , supply and installation of suitable rated rcbo in weatherproof box , supply and laying of 2 core x 1point 5 sqmm pvc insulated copper conductor for communication and wired remote controller in pvc conduit for vrf units , laying of 3 core x 2point 5 sqmm pvc insulated copper conductor cable for indoor units in pvc conduit , supply and laying of copper cable in pvc conduit for power supply of odu 4 core x 6sqmm pvc insulated copper conductor cable , supply and laying of copper cable in pvc conduit for power supply of odu 4core x 10sqmm pvc insulated copper conductor cable

Central Government/Public Sector

CTN :40309583

22 May, 2025 NA

Salem - Tamil Nadu

Tender For custom bid for services - erection of apl 1 tension reel 1 & 2 edge centring system-jobs to carry out qty shifting of all items from central stores to site, erection of controller and position transducer. 1 no laying & termination of control cables from controller to servo valve, sensors, position transducer, source and diode array camera system for section 1 and section 2. 1 no 1 no laying of cables from the controller to the main control desk for section 1 and section 2. removal of existing screw rod and photo sensor from the current location and shifting it to safe location exit control room for section 1& section 2. 1 no 1 no installation of support and frames for the new screw rod for photo sensor movement 1 no mounting of new dode array camera system for section 1& 2on the support frame. removal of light source from the existing location and shifting it to exit control room for section 1 & 2. 1 no 1 no installation of new light source for section 1 & 2. 1 no installation of protection guard for the diode array camera system for section 1 & 2..

Central Government/Public Sector

CTN :40159529

22 May, 2025 NA

Panipat - Haryana

Tender For corrigendum : supply of 80 watt single phase motor, 220/240 v ac, 50 hz motor along with the tension spring , conformal coated controller pcb along with transmitter card and receiver card for boom barrier , position sensor and photo cell safety sensor unit along with remote key for boom barrier model

Main Switch Scrap Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Corporations And Associations And Others

State Government

Central Government/Public Sector

Central Government/Public Sector