Latest mainframe hardware Tenders | Government mainframe hardware Tenders

CTN :45345805

15 Jun, 2026 NA

Delhi - Delhi

Tender For corrigendum : supply of customised licensed software for automation of embedded system testing and checks

CTN :45516001

20 Jun, 2026 NA

Krishnagiri - Tamil Nadu

Tender For purchase of ece lab electronics equipments - equipments for ece, dual output regulated dc variable power supplyinput voltage : 230v/50hz acoutput voltage :(0-30)v dcoutput current :(0-2)a dcprotection circuit : over voltage, over current, and short-circuit protectionhigh efficiency : greater than 85%low ripple and noise : less than 50 mvdigital display, function (signal) generatorspecs:frequency range : 0.1hz to 5mhzdisplay :4 to 6 digit led displayoutput waveforms : sine, triangle, square, pulse, rampamplitude :0-20 vpprise time :100 nsdistortion : 1% within specified frequency rangepower supply : 230v ac 10% , 50-60 hzoutput amplifier protection : short circuit and 15voverload protectiondc offset: 0 to 10 v adjustableattenuation: 0 to -60 db, decade resistance box range : 1 to 1m rotary switch selection with 6 dialssteps : 1 , 10 , 100 , 1k , 10 k , 1m accuracy : 1%, decade capacitance box range : 100 pf to 100 frotary switch selection with 6 dialsmaximum voltage : 350vaccuracy : 1%, decade inductance box range : 10 h to 10 hrotary switch selection with 6 dialslow-loss inductorsaccuracy : 1%, sim reader trainer kitpower supply :operates on 230v ac 10%, 50hz mains supplybuilt-in regulated smps power supplyoperating dc supply : 5v/12v with overload and short-circuit protectionsim card interface :supports gsm sim cards compatible with 2g / 3g / 4g / 5g networkssim card read/write interfacesupports sim card initialization, authentication and communication functionscompatible with standard 6-pin / 8-pin sim card socketscommunication interface :usb 2.0 interface for pc communicationrs-232 serial communication interfaceuart communication facility for embedded system interfacingsim operating parameters :selectable sim clock frequencies3.579 mhz7.159 mhz14.318 mhzsim supply voltage selection facilitysim reset and activation controlsupported protocols and standards :gsm etsi 07.07 and etsi 07.05 at command supportiso/iec 7816 smart card communication supportsim communication command monitoring facilityhardware features :on-board sim card socketled indication for :power statussim detectionreset activityuser manualutility software cd / downloadable software packagedata transmission/receptionbuilt-in keypad for standalone operation.lcd display module (128 64) for menu and status display.on-board microcontroller-based control section.software support:at command execution and monitoring software.sim manager utility software.data logging and communication terminal utility.pc-based gui software for sim data communication experiments.trainer features:fault simulation facility for troubleshooting experiments.simulation of faults such as:sim not detectedclock failurevcc failurereset failuremultiple on-board test points for signal observation.test points for:sim rstsim_clksim iovccuart tx/rxsuitable for cro/dso signal monitoring.glass epoxy pcb with educational block diagram layout.compact tabletop enclosed cabinet design.construction:front panel with printed block diagram.banana test points and patching facility.standard accessories:gsm sim trainer unit.usb communication cable.rs-232 communication cable.power cord., microwave test bench with reflex klystron oscillatormicrowave source :relex klystron tube with klystron mountoperating frequency in x-band (8.2ghz to 12.4ghz)electronic tuning through repeller voltage controlsuitable for cw microwave generationklystron powersupply:regulated klystron power supply unitbuilt-in modulation facilityoverload and short circuit protectionoperates on 230v ac 10%, 50hz mains supplywaveguide components:isolator variable attenuatorfrequency meterslotted line section with tunable probecrystal detector mountmatched loadmovable short / terminationwaveguide stands and accessoriesmeasurement unit:solid state vswr meter with high sensitivityswr measurement facilitysuitable for detector output monitoringtechnical specification :frequency range : 8.2 ghz to 12.4 ghzwaveguide types : wr-90detector type : crystal detecto

CTN :45520833

22 Jun, 2026 29.0 Thousand

Bathinda - Punjab

Tender For supply of embedded system with qualcom snapdragon 888 to run drone integration algo , a4 paper , white file cover for inspection , file cover , transparent tape large

State Government

CTN :45521250

29 Jun, 2026 42.81 Lacs

Jaipur - Rajasthan

Tender For nit 21 work of replacement of submersible pump sets and accessories of tubewell at various locations under uwss chomu under jen section chomu (urban) under sub div chomu in jurisdiction of executive engineer, phed district division ii, jaipur - 2.15 supply & installation of 3 phase isi marked submersible motor pump set of three star or better rating of bee and as per is: 8034-2018 (pump) and is 9283-2013 (motor) or as amended up to date of approved make of following duty condition with required accessories including making connection suitable for tube well/dcb. the job includes lowering of motor pump, installation of complete fitting & accessories, jointing of electrical cables up to switch board, testing of submersible pump set and interconnection up to water mains, complete in all respect.2.15.2 up to 5.5 kw (7.5 hp) & head above 120 mtr., 2.15 supply & installation of 3 phase isi marked submersible motor pump set of three star or better rating of bee and as per is: 8034-2018 (pump) and is 9283-2013 (motor) or as amended up to date of approved make of following duty condition with required accessories including making connection suitable for tube well/dcb. the job includes lowering of motor pump, installation of complete fitting & accessories, jointing of electrical cables up to switch board, testing of submersible pump set and interconnection up to water mains, complete in all respect.2.15.4 7.5 kw (10 hp) & head above 120 mtr., 2.15 supply & installation of 3 phase isi marked submersible motor pump set of three star or better rating of bee and as per is: 8034-2018 (pump) and is 9283-2013 (motor) or as amended up to date of approved make of following duty condition with required accessories including making connection suitable for tube well/dcb. the job includes lowering of motor pump, installation of complete fitting & accessories, jointing of electrical cables up to switch board, testing of submersible pump set and interconnection up to water mains, complete in all respect.2.15.6 9.3 kw (12.5 hp) & head above 120 mtr., 2.18 supply and fixing of electric control feeder panel comprising of suitable rating mccb , fully automatic star-delta starter, over load relay, ampere meter with cts, volt meter, phase preventer, suitable starting capacitors, phase indicators, lighting arrangement etc complete suitable for three phase pump set. the panel should have space for energy meter ( supplied by discom). all these equipments shall be housed by panel box made out from 18 gauge m.s. sheet with powder coating. panel should be of minimum size 900 x 600 x 450 mm with stand ( made of angle iron of size 35x35x5mm) duly bolted/screwed with enclosure box having 4 legs, each leg s length 18 and double door including in built locking system. the legs should be embedded in m-15 cement concrete plat form. the size of cc platform should be equal or bigger than the base size of panel having height of at least 200 mm from ground level. the panel should have opening of suitable size in front of space for energy meter with glass for meter reading. the operation of panel should be suitable for on 440 volt ac supply.2.18.1 above 5 hp and up to 10 hp, 2.18 supply and fixing of electric control feeder panel comprising of suitable rating mccb , fully automatic star-delta starter, over load relay, ampere meter with cts, volt meter, phase preventer, suitable starting capacitors, phase indicators, lighting arrangement etc complete suitable for three phase pump set. the panel should have space for energy meter ( supplied by discom). all these equipments shall be housed by panel box made out from 18 gauge m.s. sheet with powder coating. panel should be of minimum size 900 x 600 x 450 mm with stand ( made of angle iron of size 35x35x5mm) duly bolted/screwed with enclosure box having 4 legs, each leg s length 18 and double door including in built locking system. the legs should be embedded in m-15 cement concrete plat form. t

Central Government And Public Sector

CTN :45479439

01 Jul, 2026 NA

Bangalore - Karnataka

Tender For supply of sinumerik pcu 50,3-c,cm370,1.5 ghz,1 x 512 mb ram,24 v dc,windows xp professional for embedded system ( win xp pro embsys) cat. no.6fc5210-0df31-2aa0 of siemens make for "a"m/c shop cnc ]

Central Government/Public Sector

CTN :45465699

23 Jun, 2026 7.00 Lacs

Dinajpur - West Bengal

Tender For supply of laboratory consumables under ntep for the office of the chief medical officer of health and the secretary dh and fws of uttar dinajpur district - laying and jointing pvc pipe. heading, plastic disposable sputum containers- wide mouth(plastic disposable sputum containers (60ml capacity) (water tight, screw-top, translucent opalescent, polyethylene of thin plastic) (burning easily and appropriate size (at least 4 cm diameter)), diamond marker pencil (6 (15.24 cm.) holder with artificial diamond (hard stone) embedded at one end with screw cap, to mark on microscope glass slides), water bucket (plastic) (water bucket (plastic) with tap 40 ltr capacity of good quality), slide holding forceps (stainless steel) (slide holding forceps (stainless steel) 15 cm), plane tissue paper rolls (plane tissue paper rolls (size+ length 21 mtr x breadth 10cm (non doted) (two ply) ), foot operated paddle bucket plastic with cover (foot operated paddle bucket plastic with cover (12 ltrs capacity)), measuring cylinder 1000 ml (measuring cylinder 1000 ml capacity (glass) round bottom), measuring cylinder 500 ml (measuring cylinder 500 ml capacity (glass) round bottom), measuring cylinder 100 ml (measuring cylinder 100 ml capacity (glass) round bottom), filter paper type-1 (filter paper whatman no1.11 cm diameter containing 100 leaves per box), filter paper type-2 (filter paper whatman no1.15 cm diameter containing 100 leaves per box), stickers adhesive labels (stickers adhesive labels (small size) for sputum containers), water bath with thermometer with digital temp. meter (water bath with thermometer with digital temp. meter 5 liter for the preparation of carbolfuchsin), lens clean tissue paper(lens clean tissue paper 100 pages pack), plastic tray (plastic tray 24 x12 good quality), spirit lamp aluminum (spirit lamp aluminum 50 ml), drop bottle plastic (250ml capacity built in stem all polypropylene; leak proof screw cap made of polypropylene), storage for stock bottle (plastic) (white bottle 2 ltrs capacity), binocular microscope cover (plastic good quality), balance with cover box (can measure 10mg accuracy to 200 mg digital + battery system), broom stick (8) (broom stick (8 ) bundle of 100 pcs good quality), smear preparation loop (plastic loop with inner diameter 3-4 mm for smear preparation of biological specimen), slide box-type-1 (slide box (50 capacity) plastic), slide box-type-2 (slide box (100 capacity) plastic), glass slide new glass slide (glass slide new glass slide size 76mmx26mm, thickness 1.3 mm, edges polished, sealed in a moisture absorbing dassicant pack scratch free), silica gel (big 25gm), silica gel (blue small (04gm)), absorbent cotton roll (absorbent cotton roll 300gm/450gm), para film ((2 wide) 250ft). refractive index of 1.48. it should be colourless, odorless, transparent, free from fluorescence in day light with relative density of 0.827 to 0.890, viscocity of 110 to 230m pas, specific gravity of 0.76-0.78 at 15.5 degree c), biohazerd labels (biohazerd labels 4 x 2.875 ), thin transparent plastic pkt. (thin transparent plastic pkt. (8 x 6 )), glass rod (glass rod 6-8 mm dia x 20 length), thermocol box (thermocol box 6.5 x7.5 x7.5 ), thermocol transport box (size. thickness of box 2.5cm, outer dimension: 18.5cm length x 13 cm breadth x 14cm hight (with lid), inner dimension:14.5cm length x 8cm breadthx 13 cm hight (with inner part of lid)), stop watch (digital), thin black permanent marker pen (fine tip), zip lock plastic pouch (zip lock transparent pkt. 10 x14 plastic pouch), zip lock plastic pouch (zip lock transparent pkt. 06 x06 plastic pouch), alminium vessel (5.5 ltr (3mm gauge)), pvc tape (2.5 ), rubber band ( nylon), gel pack (250gm), gel pack (500gm), falcon tube (falcon tube (sterile)material: polypropylene, capacity: 50ml,tube style: centrifuge, bottom style: conical, neck style: wide, top style: threaded, max rcf:15500xg, graduations: yes, graduations range: 5-50 ml, graduation interval: 2.5 ml, colour

CTN :45468723

16 Jun, 2026 NA

Firozpur - Punjab

Tender For tender for supply of high performance computing workstation for simulator based technical training and instruction dedicated graphics processing unit for simulator rendering and training applications input interface devices keyboard and pointing device for simulator training workstation high definition display interface cable for simulator display and monitoring system uninterruptible power supply with battery backup for simulator training workstation virtual reality head mounted display for simulator based technical training simulator control interface devices for virtual reality based technical training digital imaging sensor module for visual capture and replay in virtual reality based simulator training removable solid state storage media 128 gb for embedded training and simulation system visual display unit for simulator control monitoring and technical instruction

CTN :45448513

19 Jun, 2026 NA

Panchkula - Haryana

Tender For supply of intra vascular lithotripsy balloon for coronary angioplasty assorted sizes , 60 mhz coronary imaging catheter with bioslide hydrophilic coating 0 point 026 e ntery profile 15 mm d istal marker to transducer point , cutting balloon with balloon mounted atherotomes assorted sizes bis and equivalent , usfda pmda eu ce medical bis approved rota link plus advancer burr assorted sizes , usfda pmda eu ce medical bis approved rota wire floppy , usfda pmda eu ce medical bis approved guide extension catheter device with hydrophilic caoting ans stainless steel collar embedded in polymer mother child catheter guideliner point , usfda pmda eu ce medical bis approved finecross microcatheter distal diameter 1 point 8 fr proximal 2 point 6 fr of length 150 cm , coronary stent graft system , goose neck microsnare kit , amplatzer asd devices assorted size bis and equivalent , amplatzer compatible asd device delivery system bis equivalent , mullin introducer sheath with radiopaque tip and dilator set assorted sizes , 6fr tpi lead

Central Government/Public Sector

CTN :45384656

13 Jun, 2026 31.96 Lacs

Pune - Maharashtra

Tender For provision of additional transformer alongwith associated items at af stn pune under ge (af)lohegaon - s & f steel tubular swaged poles complete with cast iron plate, finial taper plug, bolt, nuts & screws as specified type 410 sp-55 (11 mtr long) including one coat of red oxide primer and two coats of aluminium paint and making 30 cm wide strips (total -05 nos) with yellow and black paint alternately on external surface above column/pcc benching including numbering with black paint and painting with bitumenous paint internally and externally for portion embedded complete all as specified and directed., s & f air break gang operated switch with 12 nos insulators outdoor type, triple pole, mechanically operated, suitable for vertical installation, single break, provided with locking arrangement consisting of ms chanel ht post type insulator copper alloy, high pressure assembly drop out fuses operating rod of 20 mm dia gi pipe (medium grade) for operating from 1.2 m above gl complete including drop out fuses conforming to is-9921 part-i to v (1982 to 1985) of 1972 rated voltage 11 kv and for current rating 200 amp all as specified, material and labour for lightning arresters nominal discharge current peak 65 ka rating, suitable for operation on ht 11000 volts system, comprising of zinc oxide disks, electrodes, fibre re-in forced composite structure, non tracking weather resistant shedded heat shrinked polymeric housing for withstanding from the effects of pollution, rain, heat and with moisture seal , stainless steel bolts and nuts, stainless steel end fitting cups and fixing arrangements complete all as specified and as directed., m&l for cross arms, bracings, supports, clamps and back plates fabricated from structural steel sections i.e m.s. channel or angle sections etc. including new nuts, bolts, washers as reqd dia/length in size, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and inclusive one primer coat of red oxide, one under coat and one finishing coat of aluminium paint (1st quality ) as reqd complete as specified., m & l for cement concrete 1:3:6 type c1 (using 20 mm graded aggregate) as lean concrete for coping of pole, stay foundation etc including form work & finishing the surfaces even & smooth with out using extra cement complete all as specified, material and labour for cement concrete 1:2:4, type b-2 (using 40 mm graded stone aggregate) as lean concrete for road finishing even and fair without using extra cement complete all as specified and as directed., supply, laying & testing cable xlpe insulated, screened, pvc bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty)with stranded aluminium conductor, 11000 volts grade, of size 3 core 95 sq mm., s&f of cable end jointing kit 95 sqmm, 3 core xlpe 11kv ht cable cold shrinkable outdoor type, incl carrying out 5kv megger test after jointing complete all as specified and directed by engr-in-charge., s&f of cable end jointing kit 95 sqmm, 3 core xlpe 11kv ht cable cold shrinkable indoor type, incl carrying out 5kv megger test after jointing ,complete all as specified and directed by engr-in-charge., supply, laying & testing cable xlpe insulated, screened, pvc bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty)with stranded aluminium conductor, 1100 volts grade, of size 3.5 core 400 sq mm including aluminium lugs, cable glands ,complete all as specified and directed by engr-in-charge., supply, laying & testing industral pvc frls insulated single core flexible cable, electric power cables (heavy duty) with stranded copper conductor, 1100 volts grade, of size single core 185 sq mm, including copper cable lugs, cable glands ,complete all as specified and directed by engr-in-charge., supply and install, testing and commisioning of outdoor transformer as per is : 1180 part-i, level-ii step down, copper wound 11

Central Government/Public Sector

CTN :45395901

30 Jun, 2026 NA

Valsad - Gujarat

Tender For supply of zero toe load fastening system(ztlf) for h beam sleepers for bg 60 kg rails as per rdso drawing no. t-8759 to t-8765. 1 set of fastening consists of 02 nos. of rail pad with embedded steel plate (t-8761), 02 nos. of special cast liner (inner) for 60 kg uic rail (t-8762) 02 nos. special cast liner (outer) for 60 kg uic rail (t-8763) galvanized erc mk-v (t-5919) [ warranty period: 30 months after the date of delivery ] ]

Mainframe Hardware Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government And Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector