Latest male branch tee Tenders | Government male branch tee Tenders

State Government

CTN :45537972

22 Jun, 2026 4.00 Lacs

Parganas - West Bengal

Tender For maintenance of the water supply rising main and civil infrasructures of the pump house buildings in connection with ground water based piped water supply scheme for naihati rishi bankim silpaddan

State Government

CTN :45521250

29 Jun, 2026 42.81 Lacs

Jaipur - Rajasthan

Tender For nit 21 work of replacement of submersible pump sets and accessories of tubewell at various locations under uwss chomu under jen section chomu (urban) under sub div chomu in jurisdiction of executive engineer, phed district division ii, jaipur - 2.15 supply & installation of 3 phase isi marked submersible motor pump set of three star or better rating of bee and as per is: 8034-2018 (pump) and is 9283-2013 (motor) or as amended up to date of approved make of following duty condition with required accessories including making connection suitable for tube well/dcb. the job includes lowering of motor pump, installation of complete fitting & accessories, jointing of electrical cables up to switch board, testing of submersible pump set and interconnection up to water mains, complete in all respect.2.15.2 up to 5.5 kw (7.5 hp) & head above 120 mtr., 2.15 supply & installation of 3 phase isi marked submersible motor pump set of three star or better rating of bee and as per is: 8034-2018 (pump) and is 9283-2013 (motor) or as amended up to date of approved make of following duty condition with required accessories including making connection suitable for tube well/dcb. the job includes lowering of motor pump, installation of complete fitting & accessories, jointing of electrical cables up to switch board, testing of submersible pump set and interconnection up to water mains, complete in all respect.2.15.4 7.5 kw (10 hp) & head above 120 mtr., 2.15 supply & installation of 3 phase isi marked submersible motor pump set of three star or better rating of bee and as per is: 8034-2018 (pump) and is 9283-2013 (motor) or as amended up to date of approved make of following duty condition with required accessories including making connection suitable for tube well/dcb. the job includes lowering of motor pump, installation of complete fitting & accessories, jointing of electrical cables up to switch board, testing of submersible pump set and interconnection up to water mains, complete in all respect.2.15.6 9.3 kw (12.5 hp) & head above 120 mtr., 2.18 supply and fixing of electric control feeder panel comprising of suitable rating mccb , fully automatic star-delta starter, over load relay, ampere meter with cts, volt meter, phase preventer, suitable starting capacitors, phase indicators, lighting arrangement etc complete suitable for three phase pump set. the panel should have space for energy meter ( supplied by discom). all these equipments shall be housed by panel box made out from 18 gauge m.s. sheet with powder coating. panel should be of minimum size 900 x 600 x 450 mm with stand ( made of angle iron of size 35x35x5mm) duly bolted/screwed with enclosure box having 4 legs, each leg s length 18 and double door including in built locking system. the legs should be embedded in m-15 cement concrete plat form. the size of cc platform should be equal or bigger than the base size of panel having height of at least 200 mm from ground level. the panel should have opening of suitable size in front of space for energy meter with glass for meter reading. the operation of panel should be suitable for on 440 volt ac supply.2.18.1 above 5 hp and up to 10 hp, 2.18 supply and fixing of electric control feeder panel comprising of suitable rating mccb , fully automatic star-delta starter, over load relay, ampere meter with cts, volt meter, phase preventer, suitable starting capacitors, phase indicators, lighting arrangement etc complete suitable for three phase pump set. the panel should have space for energy meter ( supplied by discom). all these equipments shall be housed by panel box made out from 18 gauge m.s. sheet with powder coating. panel should be of minimum size 900 x 600 x 450 mm with stand ( made of angle iron of size 35x35x5mm) duly bolted/screwed with enclosure box having 4 legs, each leg s length 18 and double door including in built locking system. the legs should be embedded in m-15 cement concrete plat form. t

CTN :45384476

17 Jun, 2026 NA

Dharmapuri - Tamil Nadu

Tender For corrigendum : purchase of equipments for mechanical department - purchase of equipments for mechanical department, tail stock assembly medium-duty tailstock assembly for dismantling & assembly quill stroke: minimum 75 mm taper: mt-3 (preferred standard) feed: hand wheel operated features: set-over screws for taper turning spindle locking arrangement body: cast iron (fg 260) spindle: hardened steel, working model of fuel supply system - petrol mpfi type petrol multi point fuel injection (mpfi) system for dismantling and assembly practice system type: non-working / cut-section model for study of internal construction construction: actual automotive components or equivalent training model mounted on frame includes throttle body (sectioned), fuel injectors, fuel rail, intake manifold includes fuel pump, fuel tank (dummy), fuel filter, pressure regulator includes ignition system components: ignition coil, spark plug, distributor (if applicable) ecu module (dummy/display type) with wiring layout representation all components cut-open, painted, and clearly labelled provision for manual demonstration of flow path and component interaction mounted on rigid ms powder-coated frame designed for repeated dismantling, assembly, and component identification, hydraulic cylinderbore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steelsupply: mounted on training base suitable for dismantling and inspection, hydraulic operated directional control valves (dcv) type: manual spool type dc valve configuration: 4/2 way size: ng06 (cetop 3) rated pressure: 210 bar flow capacity: 20 40 lpm body: hardened steel / cast steel spool: ground and hardened ports: clearly marked (p, a, b, t) supply: mounted on training plate suitable for dismantling and study, bearing with shaft assembly type: dismantling and assembly teaching unit shaft diameter: 30 mm shaft material: en8 steel bearings: deep groove ball bearing (6205 / 6206) housing: cast iron locking arrangement: circlips end covers mounting: bench-mounted / frame mounted unit, coupling unit using driving and driven shafts using plummer block bearing unit the plummer block housing material: cast iron (grade fg 200 or equivalent). type: sng or snl series (split-type housing). sealing: felt seals or v-ring seals (to demonstrate lubrication retention). lubrication: provided with a grease nipple at the top center for manual lubrication practice. the bearing type: self-aligning ball bearing (1200 series) or spherical roller bearing (22200 series). bore diameter: standard 25mm or 30 mm. shafting and coupling shaft material: ground carbon steel (en8 or en9) for high surface finish. coupling type: flexible coupling: to demonstrate the bearings ability to handle slight misalignment. rigid flange coupling: to demonstrate traditional direct connection. driving/driven setup: one shaft connected to a small electric motor (driving) and the other to a brake drum or load (driven)., 3d printing machine build volume(wxdxh) 256 x 256 x 256 mm shell enclosed (plastic & glass) hot end all-metal nozzle 0.4 mm stainless steel included max hot end temperature 300 nozzle diameter 0.4 mm (included) 0.2 mm, 0.6 mm, 0.8 mm build plate compatibility textured pei plate, cool plate, engineering plate, high temperature plate max build plate temperature 100 max speed of tool head 500 mm/s max acceleration of tool head 20 m/s supported filament pla, petg, tpu, pva, pet, abs, asa chamber monitoring camera low rate camera 1280 x 720/0.5fps time lapse supported filament run out sensor :yes control board fan closed loop control auxiliary part cooling fan closed loop control air filter activated carbon filter

CTN :45442218

15 Jun, 2026 2.58 Lacs

Chandigarh - Chandigarh

Tender For corrigendum : laying and making connection of sewer line for additional toilets at ground floor in house no. 2501 to 2498 (type 9) to main mc sewer line and other allied works sector 19-c, chandigarh. (ch. to 2216 (n.p) maintenance and repair)

CTN :45488561

30 Jun, 2026 12.09 Lacs

Srinagar - Jammu And Kashmir

Tender For providing of permanent electrical connection for the load of 80kw for pump and pavilion building and indoor stadium cum office of synthetic hockey field polo ground srinagar

CTN :45491485

23 Jun, 2026 12.80 Lacs

Bheemunipatnam - Andhra Pradesh

Tender For auction sale of flat - description of the propertyall that site measuring an extent of 17.45 sq.yds and common area of each unit 5.04 sq.yds, being undivided and unspecified share out of the total extent together with flat bearing no. lig-ii-g-23 with a plinth area 785 sft. in the ground floor bearing door no. 7-1531, asst. no. 1531, electrical service connection no. 116680k005000476 in category kapuluppada lig - ii, group housing scheme, sector-iv, constructed in survey no.312/part of kapuluppada village, within the limits of kapuluppada grama panchayat, bheemunipatnam mandal, in the registration sub district of bheemunipatnam, visakhapatnam district and bounded by: boundaries of flat no lig-ii-g-23 in ground floor: east: common open space / flat no 24, south: common open space/ flat no 26, west: common open space, north : common open space, boundaries of block c: east: block a, south: block c, west: 33’.0” existing wide road, north: common drive way

State Government

CTN :45466096

15 Jun, 2026 30.00 Lacs

Siwana - Rajasthan

Tender For annual rate contract for provding new water service connection with material under division siwana - providing household tap connection as per technical specification and approved drawing as per relevant is code (amended up to date) from hdpe/upvc/di/ac/ms/gi pipe line up to consumer meter/premises by using pp mechanical integrated saddle with inbuilt flow control valve made out of ss316 designed for 5 lpm discharge at 0.5 bar pressure , not exceeding the flow of 7 lpm at 2 bar and a compression elbow, moulded in single piece/ fusion welded (complete job) including digging out suitable size of pits and trench for laying service line in all kinds of soil; depositing and refilling of pit & jhiri with watering & ramming /compacting in layers and disposal of surplus excavated soil as directed with in a lead of 100 meter ; providing & fixing of all fitting duly approved in accordance with specification for potable water including gm full-way valve (is:778 mark) or wheel valve and specials with 20 mm nominal dia mdpe pipe pe 80 pn 16 as per iso 4427 / 20 mm nominal dia ppr-c (three layered) pipe pn16 sdr 7.4 (is:15801:2008) (isi mark) and above ground level using ppr-c pipe with standard ppr fittings/ gi pipes in the premises for fixing a tap / meter box (excluding) ,including accessories with flushing, cleaning, disinfecting and testing of pipe line complete required for making of service connection complete in all respect including labour charges . the service line should be laid at least 45 cm below ground level. note: road cut and restoration is not part of this item and paid separately. for connection with 20 mm dia mdpe/ppr-c pipe length up to 05 mtr. rate is exclusive of gst., road cutting for house hold service connection in minimum trench width wherever road crossing is required. road cutting of cement concrete,wbm, black top etc. of all thickness shall be done by using a concrete cutter machine keeping minimum trench width and restoration of the road with cement concrete with pcc m-10 and cc m-30 grade as per specification and direction of engineer in charge.(06 meter) rate is exclusive of gst., add extra over item no 1.21, 1.22 & 1.23 for providing 20 mm pe 80 pn 16 as per iso 4427 mdpe pipe including excavation, providing, laying & jointing of service line above 5.00 mtr. rate is exclusive of gst., road cutting charges for pit of size 1.0x1.0 mtr for providing connection dismantling of cement concrete pavement for pipe line and chambers by mechanical means using pneumatic tools, cutting the peripheral edge by cc cutter, breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials up to a lead of 1000 meters. measurement for dismantled trench to be made as per standard trench width specified in tender document and no extra payment shall be made be made for trench width more than specified, re-handling of material/earth to complete the tasks as per technical specification and scope of work. (0.30 cum) rate is exclusive of gst., road restoration charges for pit of size 1.0x1.0 mtr for providing connection providing and laying in position cement concrete m10 grade nominal mix 1:3:6 (1 cement : 3coarse sand : 6 graded stone aggregate 40 mm nominal size) in base course complete including all material, labour, machinery, lighting, guarding for road restoration work in trenches of pipe line and chamber work. measurement for cc work to be made as per standard trench width specified in tender document and no extra payment shall be made be made for trench width more than specified, complete work as per technical specification and scope of work. (0.10 cum) rate is exclusive of gst., providing and laying in position cement concrete in specified grade over prepared base course complete including finishing, curing, all material, labour, machinery, lighting, guarding for road restoration work in trenches of pipe line and chamber work. measurement fo

Central Government/Public Sector

CTN :45474538

16 Jun, 2026 NA

Multi City - Maharashtra

Tender For auction sale of depot ferrous scrap - scrap ms s&t released items of sort and sizes including, junction box, stop signal, shunt signal with offset, point machine body , signal pole, signal ladder, unit to aspect, route drum, rodding set, location box, gate boom, signal base, shunt signal, point d bracket, route drum, impedance bond cover, protection cover, half location frame, signal post, plunger, ladder assay, offset bracket, point machine without motor, ground connection/point rodding, ms battery box, gate meeting post, gate pedestal, gate gear box, empty cabinet, strips, plates, rods, transmission assemble, levers, pipes, ladder, fabrication angle channels, signalling electrical substation machinery parts fittings, nut bolts, signalling poles, point motor, point plunger, route drum, p bracket, point auxiliary, clamp assly, supporting patti, fuse alarm box, power supply box, rail deflector, point jb, aftc tu jb, relay and all kind of signalling items and other miscellaneous ms gi and ci fittings with or without n/f and other attachments. nf without attachment will not be delivered. note- cutting allowed only for location boxes for easy loading at the time of delivery. location - a by 2.

Central Government And Public Sector

CTN :45469401

19 Jun, 2026 NA

Thane - Maharashtra

Tender For tender for supply of brass double compression type male connector 6 mm x one fourth inch npt m , brass double compression type male connector 6 mm x half inch npt m , brass double compression type male connector 6 mm x three eight npt m , brass double compression type male connector 6 mm x three fourth npt m , brass double compression type male elbow 6 mm x one fourth npt m , brass double compression type male elbow 6 mm x half npt m , brass double compression type male elbow 6 mm x three eighth inch npt m , brass double compression type male elbow 6 mm x three fourthinch npt m , brass double compression type male branch tee 6 mm x one fourth inch npt m , brass double compression type male branch tee 6 mm x half inch npt m , brass double compression type male run tee 6 mm x one fourth inch npt m , brass double compression type male run tee 6 mm x half inch npt m , brass double compression type female connector 6 mm x one fourth inch npt f , brass double compression type female connector 6 mm x half inch npt f , brass double compression type female connector 6 mm x three eight inch npt f , brass double compression type female connector 6 mm x three fourth inch npt f , brass double compression type female elbow 6 mm x one fourth inch npt f , brass double compression type female elbow 6 mm x half inch npt f , brass double compression fitting female elbow 6 mm x three eight inch npt , brass double compression fitting union 6 mm , brass double compression fitting , union elbow 6 mm , brass double compression fitting union tee 6 mm , brass double compression fitting union cross 6 mm , brass double compression fitting plug for plugging open ended fitting 6 mm , brass double compression fitting cap for capping open ended tube 6 mm , brass double compression fitting bulkhead union male connector 6 mm x one fourth inch npt , brass double compression fitting bulkhead union male connector 6 mm x half inch npt , brass double compression fitting bulkhead union male connector 6 mm x three eight inch npt , brass double compression fitting bulkhead union male connector 6 mm x three fourth inch npt , brass double compression fitting bore through fitting male 6 mm x one fourth npt , brass double compression fitting bore through fitting male 6 mm x half inch npt , brass double compression fitting bore through fitting male 6 mm x three eight inch npt , brass double compression fitting bore through fitting male 6 mm x three fourth inch npt , brass double compression fitting nut 6 mm , brass double compression back and front ferrule 6 mm , brass double compression male connector 10 mm x one fourth inch npt , brass double compression fitting male connector 10 mm x half inch npt , brass double compression fitting male connector 10 mm x three eight inch npt , brass double compression fitting male connector 10 mm x three fourth inch npt , brass double compression fitting male elbow 10 mm x one fourth inch npt , brass double compression fitting male elbow 10 mm x half inch npt , brass double compression fitting male elbow 10 mm x three eight inch npt , brass double compression fitting male elbow 10 mm x three eight inch npt , brass double compression fitting male branch tee 10 mm x one fourth inch npt , brass double compression fitting male branch tee 10 mm x half inch npt , brass double compression fitting male run tee 10 mm x one fourth inch npt , brass double compression fitting male run tee 10 mm x half inch npt , brass double compression fitting female connector 10 mm x one fourth inch npt , brass double compression fitting female connector 10 mm x half inch npt , brass double compression fitting female connector 10 mm x three eight inch npt , brass double compression fitting female connector 10 mm x three fourth inch npt , brass double compression fitting female elbow 10 mm x one fourth inch npt , brass double compression fitting female elbow 10 mm x half inch npt , brass double compression fitting female elbow 10 mm x three eight inch npt , brass

corporations/Associations/Others

CTN :45445697

19 Jun, 2026 15.14 Lacs

Kaushambi - Uttar Pradesh

Tender For supply of materials and erection for shifting of control room pannel at 33/ 11 kv sub station bharsawa distt. kaushambi under deposit scheme on "semi turnkey basis" under edc, kaushambi - name of work: supply, carriage & erection of materials for control room pannel shifting of shiffting of 33/11 kv s/s bharsawa distt. kaushambi, supply of de-centralised materials, 11 kv 3x120 mm2 xlpe cable jointing kit o/d & i/d, control cable 4x2.5 mm2, control cable 2x2.5 mm2, g.i. pipe 6 " dia, rubber matting, clamp with nut & bosts, earth wire clamp for pcc pole, stay clamp for pcc pole, top channel clamp pcc pole, dropper channel clamp pcc pole, g.i. strip 35x6 mm, carriage of following material, pcc pole 8.5 mtr. long., structure of la, 33kv isolator, 33 kv cts, single t/f control pannel, 33kv vcb,11 kv outgoing. incoming pannel, battery & battery charger and other associated accessiories etc. (availibility at concern store center of store division), erection work, installation of 33 kv single transformer control pannel 2 no., incoming 2 no. and 7 no. outgoing in the switchgear room and grouting the pannel by rag bolt using cement, sand mortar in ratio 1:3. work includs fitting of all accessories in all respect with complete connection of control cable with pannel. all material will be provided by the contractor except vcb and crp., construction of cable trenchs with top cover and laying of control cable for vcb, c.t. & t/f control pannel etc. as per direction of engineer. trenchs to be 12 wide and 9 deep. work includes digging, of trench, concreting of the foundation in the ratio 1:3:6 r.b. wall 9 wide with cement mortar 1:4 and plastering inside the trench in the ratio 1:3 and sand filling in the trench. all material will be provided by the contractor., earthing of 11 kv indoor equipments, switchgears as per resspo drawing. with g.i. strip of size 35x6 mm. g.i. strip fully welded at both ends and to be connected with earthmat,, erection of dp with pcc pole 8.5 mtr long with all accessaries and grouting of the pcc pole with cement, sand and brick ballast ratio 1:4:8 size 0.45x 0.45x 1.5 mtr deep under the ground as per drawing no. res-6.(cement, sand, brick, ballast shall be provided by the contractor.), installation of 24 volt battery and battery charger with cabinet in the switch gear room, by grouting base channel 100 x 50 x 6 x 1000mm. fixing of rag bolt., laying of 11 kv 3x300/3x185/ 3x120 sqmm. xlpe cable by digging 0.75 mtr. deep trench, putting layer of sand in the bottom, ramming it, laying of cable over it rmt and covering the cable from sides and top by laying bricks, finally covering the same by earth and levelling of the same, all the materials, except cable, will be pvovided by the contractor., fixing and termination of outdoor/ indoor heat shrinkable cable boxes of size 3 x300/3x185/3x120 sqmm. xlpe cable. boxes will be supplied by the contractor, sundries ( as per site requirement/emergency work), safe dismantling of 11 kv o/g pannel & received back to store, laying of weasel conductor with the help of aluminium roller by hanging three nos. on each support in a manner taking sufficient care to ensure safety of weasel conductor against rubbing on ground, precaution for safety of crops is also to be taken. the work includes jointing of conductor by providing jointing sleaves, stringing of conductor upto correct sag and binding of conductor with insulators on each support. all material shall be provided by contractor such as jointing sleeve binding wire, armour rod etc.

Male Branch Tee Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

State Government

Central Government/Public Sector

Central Government And Public Sector

corporations/Associations/Others