Latest man cooler Tenders | Government man cooler Tenders

Corporations And Associations And Others

CTN :41260443

19 Aug, 2025 NA

Yamuna Nagar - Haryana

Tender For supply of lighting material aviation lights and its spares - teknic make 22.5mm indicating lights in 220/ 250 vdc, red colour, item code-p2plbr4l, teknic make 22.5mm indicating lights in 220/ 250 vdc, green colour, item code-p2plbr3l, teknic make 22.5mm indicating lights in 220/ 250 vdc, yellow colour, item code-p2plbr8l, teknic make 22.5mm indicating lights in 220/ 250 vdc, blue colour, item code-p2plbr6l, teknic make 22.5mm indicating lights in 220/ 250 vdc, ambef colour, item code-p2plbr5l, teknic make 22.5mm indicating lights in 220/ 250 vdc, white colour, item code-p2plbr1l(s), teknic make 22.5mm indicating lights in 220/ 250 vdc, clear colour, item code-p2plbr7l (s), powder coated ms junction box with front cover & lock arrangement. suitable for mounting on street lighting pole with mounting clamp. junction box should be supplied with factory fitted aluminum busbar for r, y, b & n with support insulator.size-300 x 200 x 125mm (lx w xd),is: ip-44 or latest as per is 13947 or the lates version thereof.voltage rating-440v ac/ 40a. cable entry-one way with two no. of holes in the bottom side., led flood light 75w-80w with system lumen minimum 10000im: ip-65 or above cri>70, pf-.095, cct=5700-6000k, thd10% operating voltage-110-300v, led chip-lumiled, nicia cree osram, samsung, everlite make, g/w-minimum 3 years, led well glass 35w-40w : with system lumen minimum 4000im: ip-65 or above cri>70, pf-.095, cct=5700-6000k, thd10% operating voltage-110-300v, led chip-lumiled, nicia cree osram, samsung, everlite make, g/w-minimum 3 years, led flood light 190w-200w lumen 22000: ip-65 or above cri>70, pf-.095, cct=5700-6000k, thd10% operating voltage-110-300v, led chip-lumiled, nicia cree osram, samsung, everlite make, g/w-minimum 3 years, medium intensity aviation led light230v ac, red colour,intensity -2000-2000cdillumination-360 degree uniform with in built surge protection, lamp fitting, item name: high intensity aviation obstruction light fitting with led, type of lamp:led, voltage rating:240v ac +/- 10%, power rating: not available, additional information: high intensity aviation warning light, flashing, leds: smd high power leds with 100k burning hours life expectancy lens, protection for light control panel having following features: digital flasher card, surge protection synchronization through master controller alarm for lamp failure via potential free contact, change of mode: through photo controller, intensity: day- 200000 cd 25%, twilight-20000 cd 25%, night-2000 25%, ip65, make- avionics, biney, avaids, geltronix instapower, aviation power only, low intensity aviation warning light conforming to icao regulations with led for red light output operations in night with the below features: intensity: 32cd ingress protection: ip 65 protection pcb: metal core pcbs for full heat transfer from led junction, lens: borosilicate glass lens for reduced sandblasting, body: full aluminium body lm06 for proper heat dissipation dusk to dawn operation of the lights will be done by photocell head alarm for lamp, make- avionics, biney, avaids, geltronixinstapower, aviation power only., lamp fitting spares, item name:photo cell head equipment:cooling tower aviation lamp fitting, type of lamp:led, voltage rating:2kv ac, power rating:550 w, make- avionics, biney, avaids, geltronixinstapower, aviation power only, lamp fitting spares, item name: communication box, equipment:high intensity discharge light, type of lamp: xenon, power rating: not, available, make: aviads technovators private limited or equivalent, model:tass-hi-xe-dn (fhu), additional information:with all standard accessories., electrical miscellaneous, item name: complete master control panel, voltage rating:230vac, current rating: not available, additional information: for medium & low intensity aviation obstruction light, with flash controller, photo cell head & other related accessories.

CTN :39481967

01 Sep, 2025 NA

Dehradun - Uttarakhand

Tender For corrigendum : supply of veterinary instruments and equipments - allis tissue forceps (20 cm.), artery forceps curved (15 cm ), artery forceps straight (15 cm ), forceps s.s. (20 cm), forceps s.s.(15 cm), haemostat straight s.s.(17.5 cm), haemostate curved s.s. (15 cm. ), mayo s scissors curved isi (s.s. 15cm), mayo s scissors straight isi (s.s. 15cm), scissors straight s.s.(12.5 cm), scissors straight s.s.( 17.5 cm), surgical gloves (standard), surgical mask (standard), suturing needle (assorted size) (traumatic/atraumatic cured/st.), suture thread silk/ nylon (10 mt. reel no.100, 0, 1, 2, 3), chromic cat gut (100, 0, 1, 2, 3 no.), needle holder s.s.(15cm), instrument trolly, dressing drum s.s. round 20 gauge (height 30cmx30cm dia.), b.p. blades (no. 22, 23, 24, 11, 12, 13,14, 16, b.p. handle s.s.(no. 3 ), b.p. handle s.s.(no. 4), kidney tray s.s.(15 cm length), tray small ss (250mmx300mm), hypodermic needle (15 x3/4"), hypodermic needle (18 x3/4"), vaccutainer with needle (with vacuum, 10 ml and needle of double bewell 16 no.), electrcally operated needle and syringe destroyer. destruction rate max. 1 minute per needle of 1.6 mm thickness with 80 mm length. min. 350 cutted hubs of syringes with needle burnt residue., bloodless castrator for small animals 9 (made of special high carbon steel coated for protection against rust formation), castrator imported, i/v fluid stand (s.s.), intra venous set (disposable 0 standard) ), scalp vein set (21 no. 0 22 no.), electric dehorner (30 cm length), trocar canula for sheep s.s.(15 cm), teat syphon (ss), drenching bottle (large) (metal 500 m), drenching bottle (small) (metal 200 ml), doctor coat tericot (free size), plastic apron, macentosh sheet (double colour), rubber arm sleeves with latex gloves (no. 9), gum boot, dog muzzle (assorted size), dog nail cutter (standard), measuring cylinders (50 ml graduated borosil glass ), measuring cylinders of (100 ml graduated borsil glass ), medicine carry bag (nylon 600 dpu coated padded, multipocket for medicine and surgical equipments ), jar with lid ss (2 kg. capacity), jug ss (2 ltr. cap.), thermos s.s. double insulated (1 ltr. cap., 30cm length, 7.5cm mouth dia with soulder carrying strap.), bucket ss (12 ltr capacity), california mastitis kit, centrifuge machine (bench top) for general purpose, canopy tent with carrying bag. frame made of steel powder coated pipe (23 gauge) 0 tetron cover (waterproof) with two folding chairs and one folding table, vaccine carrier (1.6 lit capacity with 4 ice packs), microscope binocular, autoclave electric, calf puller ss 316/304., animal catching device, cold boxes vaccine storage capacity 20 ltr. weight fully loaded 43.3 kg. empty weight 17.5 kg. external surface material plastic, internal lining material plastic , insulation material polyurathene, insulation thickness 110 mm,, refrigerator, thermocautery, veterinary urine analyzer with accessories, animal sling for large animals, cold cabinet/ cold room with 25% capacity of racks as deep freezer and 75 % as cold cabinet having 2-8 degree celcius temperature, digital display, alarm system for temp. beyond set point, hematology analyzer with accessories (three parts), semi automatic veterinary serum analyzer with accessories, verticle cold cabinets for vaccine storage, with storage temperature 2-8 degree celcius. temperature holding time atleast 12 hrs, at power failure. adjustable shelves., hot air oven, incubator, ice liner (ice lined refrigerator or freezer) compressor compartment0 hermetically sealed high quality compressor 230 v 50/60 hz. relatively noise less fan to cool down the compressor. all steel tubes protected with special compound against rust formation. 1 thermostate pre-stetted from the factory for 2 c - 8 . control panel situated at the front of the unit. light indicators for different functions, 1 digital thermometer to indicate the internal temperature, latest cooling system. insulation with thick polyurethane foam. foaming agent- cyclo

CTN :41017328

30 Jul, 2025 NA

Udyogamandal - Kerala

Tender For corrigendum : supply of man cooler

CTN :41161609

06 Aug, 2025 NA

Kanchrapara - West Bengal

Tender For supply of heavy duty industrial 280 ltrs. capacity man cooler (tent cooler) as per annexure attached. [ warranty period: 30 months after the date of delivery ]

CTN :41161740

13 Aug, 2025 NA

Adra - West Bengal

Tender For supply of potable water purification system with inbuilt water cooler. specifications as per - storage ca pacity (in litre)-80 , cooling capacity, ltr/hr-50 , purification capacity, ltr/hr-50 , warranty of compressor-3 years ,warranty of machine- 02 years ,water filter type- ro & uv based. ,condenser material- copper ,cert ification- iso ,refrigerant- r134a, number of faucets- 02 ,storage tank material- stainless steel 304, body material- ss304 , number of free services during warranty-02 firm offered make /brand - usha/ voltas/a quagurd or similar [ warranty period: 30 months after the date of delivery ]

CTN :41027370

28 Jul, 2025 NA

Malda - West Bengal

Tender For corrigendum : supply of industrial cooling fan (man coolers) as per is 6272

corporations/Associations/Others

CTN :41116893

01 Aug, 2025 NA

Shahdol - Madhya Pradesh

Tender For supply of industrial cooling fan (man coolers) as per is 6272,table fan / wall mount fan / ceiling mount fan as per is 555

Central Government / Public Sector

CTN :41116778

28 Jul, 2025 NA

Hyderabad-T - Telangana

Tender For supply of industrial cooling fan (man coolers) as per is 6272

State Government

CTN :40950747

28 Jul, 2025 1.77 Crore

Srinagar - Jammu And Kashmir

Tender For corrigendum : supply, installation, testing and commissioning of 2 no. chillers with cooling tower in central ac plant of main hospital at skims soura - sitc of vfd based, ahri/ eurovent certified, water-cooled, mono/ twin screw type chiller of capacity not less than 100 tr with allied items. the item shall be complete and ready to be connected with main headers in the existing central air conditioning plant of skims soura. the chiller shall be accompanied with microprocessor based control panel with all safety, switch gears needed for safe, smooth and hassle-free operation. the job includes laying of foundation as per oem recommendation which shall be not less than 6 inches above the finished floor level. the technical specifications are further detailed in annexure b., sitc electric-motor driven centrifugal pump for condenser and chiller sides having a discharge of 15 to 18 litres per second, head of 30 metres, 1450 rpm. the technical specifications are furhter detailled in annexure b., insulated chilled water piping (nitrile rubber insulation)supplying, laying/ fixing, testing and commissioning of following nominal sizes of chilled water piping inside the building (with necessary clamps, vibration isolators and fittings but excluding valves, strainers, gauges etc.) duly insulated with following closed cell elastometric nitrile rubber of minimum 45 kg/ cum density, thermal conductivity 0.037 w/mk or better at 20 deg mean temperature class o insulation applied by suitable adhesive complete including repairing of damage to building etc. as per specifications and as required complete in all respect.note: the pipes of sizes 150mm & below shall be m.s. c class as per is: 1239 and pipes size above 150mm shall be welded black steel pipe heavy class as per is: 3589, from minimum 6.35mm thick m.s. sheet for pipes upto 350 mm dia., 300 mm (32mm nitrile insulation thickness), 250 mm (32mm nitrile insulationthickness), 150 mm (32mm nitrile insulationthickness), 125mm (32mm nitrile insulation thickness), 100 mm (32mm nitrile insulationthickness), 80 mm (32mm nitrile insulation thickness), 65 mm (32mm nitrile insulationthickness), sitc of butterfly valves with di body double flanged construction with epdm coated disc with long pitch and pn 16 pressure rating as per is 13095 (1991), 250 mm , 150 mm , 125 mm , 100 mm , 80 mm , 65 mm , providing and fixing of aluminum cladding of 0.63 mm thick sheet to the insulated pipelines including bends, valves, fittings, etc. the job includes grooving, providing and fixing of screws, washers etc. as per is : 2676 - 1981, 300 mm (32mm nitrile insulation thickness), 250 mm (32mm nitrile insulation thickness), 150 mm (32mm nitrile insulationthickness), 125mm (32mm nitrile insulationthickness), 100 mm (32mm nitrile insulation thickness), 80 mm (32mm nitrile insulationthickness), 65 mm (32mmnitrile insulation thickness), sitc of ductile iron non-return valve of following size with allied jobs as per site requirement. the valve shall be conforming to is-5312. pressure rating : pn16, 150 mm , 125 mm , 100 mm , sitc of y-strainer (ci) flanged end, of following size with allied jobs as per site requirement. pressure rating : pn16, 150 mm , 125 mm , 100 mm , 80 mm , sitc of balancing valve (ductile iron) of following size with allied jobs as per site requirement. pressure rating : pn16, 150 mm , 125 mm , sitc of t-strainer (c.i.) of following size with allied jobs as per site requirement. pressure rating : pn16, 250mm , sitc of fully stainless steel pressure gauge (bourdon beryllium copper, socket ss316l, case and bazel ss304), rugged construction with epdm blowback, safety glass. 0-40 kg/cm , dual display bar/psi or selectable, sitc in position the bi-metal dial thermometer temperature guage 4 dail size bsp (m) connection, ss case and ss wetted parts completer as required, sitc of air release valve of following size. air release valves shall be provided at all higher points in piping system for venting., 25