Latest manganese plate Tenders | Government manganese plate Tenders

State Government

CTN :45510466

25 Jun, 2026 NA

Silvassa - Gujarat

Tender For providing and installing gymnasium equipment at opp. sainik school, mota randha, d&nh. - pec dec flyfeatures:* continuous welded, factory assembled weight frame.* fiberglass reinforced nylon pulleys.* industrially rated, sealed bearings at all pivot points.* 3 gauge steel connecting plates.* .50 dia. connecting bolts* extended handle provides multiple gripping positions.* adjustable seat.standard weight stack - includes a 210 lb. weight stack with a 310 lb. weight stack option.product weight - 503lb / 228.16kgmainframe - 11 gauge 2.375 x 4.625 oval tubingcables - fiberglass reinforced nylon pulleys.upholstery - durafirm upholstery over 2 high density foamdimensions - 34"w x 57"l x 69"h (86cm x 145cm x 173cm), lat pull down + rowingfeatures:* dual-function design: enables both lat pull-down and vertical row exercises in one machine.* continuous welded, factory assembled weight frame.* fiberglass reinforced nylon pulleys.* industrially rated, sealed bearings at all pivot points.* 3 gauge steel connecting plates.* adjustable seat & leg hold downsstandard weight stack - 2:1 weight ratio with a 210 lb. weight stack provides 420 lbs. of resistance. also available in a 310 lb. weight stack.product weight - 549lb / 249.03kgmainframe - 11 gauge 2.375" x 4.625" oval tubing,cables - 5.5mm dia., 2500lb rated aircraft cable.upholstery - durafirm" upholstery with over 2" high density foamdimensions: 41 w x 78 l x 77 h (104cm x 199cm x 196cm), leg curl/leg extensionfeatures:* continuous welded, factory assembled weight frame.* fiberglass reinforced nylon pulleys.* industrially rated, sealed bearings at all pivot points.* 3 gauge steel connecting plates.* adjustable seat back and leg rollersstandard weight stack - includes a 210 lb. weight stack with a 310 lb. weight stack option.product weight - 505lb / 229.07kgmainframe - 11 gauge 2.375" x 4.625" oval tubing,cables - 5.5mm dia., 2500lb rated aircraft cable.upholstery - durafirm" upholstery with over 2" high density foamdimensions: 53 w x 40 l x 62 h (135cm x 102cm x 158cm), dip/chin assist*dual-function design: supports both weight-assisted chin-ups (pull-ups) and dips in one machine.*adjustable weight assistance: allows users to select assistance level based on strength and training goals.*heavy-duty commercial frame: built with high-quality steel for durability in high-traffic gym environments.*smooth counterbalanced system: ensures fluid, controlled motion throughout the exercise range.*ergonomic multi-grip handles: provide varied grip options for targeted upper-body training.*non-slip knee platform: offers secure support and comfort during assisted exercises.*premium upholstery & finish: durable padding and corrosion-resistant coating for long-term usesize: 58 x 46 x 85 inchesweight stack: 80kg, wrist curl machinesize: 18" x 34" x 39.37" weight stack: 100kg, preacher curl bench*ergonomic design: the bench is designed to support the user in a seated position, allowing for proper alignment and reducing the risk of injury.*adjustable components: features adjustable arm pads and seat height to accommodate users of various sizes, ensuring comfort and effectiveness during workouts.*durable construction: built with high-quality materials to withstand heavy use in both commercial and home gym settings.*compact footprint: designed to fit into smaller workout spaces without compromising on performance.size: 36" x 36" x 37", adjustable bench6-position ladder-style back pad adjustmentdimension: 59" length x 27" width x 22" height, simple flat bench, dumbbell rackholds one (1) pair each of 5-50 lb. hex dumbbells.30"h x 20"l x 40"wheavy duty 12-gauge steel construction, plate tree, functional trainersize: 80.8" x 55.3" x 24" weight stack both side: 150kg2:1 pulley ratio for smooth resistance32 adjustable cable positions81" cable travel lengthpremium aluminum pulleys for ultra-smooth motionintegrated multi-grip pull-up barband pegs for added resistance trainingbuilt-in pegboard storage sys

Central Government/Public Sector

CTN :45431609

11 Jun, 2026 NA

Multi City - Gujarat

Tender For auction sale of depot ferrous scrap - scrap various type of diesel parts and diesel engine parts, cpoh parts such as rail cutting machine, jack, various types of shaft, engine parts, track machine parts, showel, link, tm machine parts, armature part, hydrolic pump, hydrolic crane, wintch, axle box, blower, gear, gear case and fan case cover, bearing, pressure chamber, various types of housing, pulley, casing, bush, roller,sleeves, connecting rod, equiliser beam, filter tank, sump, compresor part, spring seat, disc plate, dynamic resister part, head, pinion, radiator tube, cylinder, cylinder head, cylinder liner, damper, engine body, rotor, engine cut up materials, liner, shaft, axle box housing, dril machine parts, cattle guard, compressor parts, piston, piston ring, rmc auto parts, submercible parts, diesel generator set parts, generator parts, tray, crane parts, fasterning aids, dg chassis, (with or without parts), break cylinder, knuckle, coupling, buffer plunger and other auto parts, spring pcs., emf, all type of chain, c type clamp, chain with or without hook, pulley, pipe, spring, bush, pulling & lifting machine,cracking bar,dies,leak test gauge,connecting rod carrier,accessory housing alignment,clamp for listing cylinder,hook and clamp,spanner bar,listting device turbo air,etc. with or without minor nf old used and u.s.

CTN :45406737

12 Jun, 2026 NA

Parganas - West Bengal

Tender For supply of lever for measuring sliping torque , wrench for idler wheel lock nut , appliance for adjustment torsion bar , support for txn cover , track tension mechanism tubular , wrench s-32 for sprocket wheel rim out , pin for track link knocking out , air compressor lock nut remove appliance , wrench s-32 for titg nut for track drive , wrench for support small knocking out pin , appliance for gear box alignment , jimmy bar , l key , radiator top plate stopper , drain tube

CTN :45113148

06 Jun, 2026 NA

Bangalore - Karnataka

Tender For bid to ras corrigendum : supply of hsrst_ secondary support , hsrst_ secondary alignment bolt , hsrst_ secondary base shim , hsrst_ secondary cell shim , hsrst_ suffer plate , hsrst_ bogie pull device , hsrst_ traction washer , hsrst_ front coupler tool - done , hsrst_ rear coupler device , hsrst_ shim 20mm , hsrst_ shim 1mm , hsrst_ cantrail, waist, 150mm beam , hsrst_ waist, cantrail, plate , hsrst_ front cantrail plate , hsrst_ spacer 1 , hsrst_ spacer 2 , hsrst_ front cantrail beam , hsrst_ distributor 1 , hsrst_ distributor 2 , hsrst_ slide stop support , hsrst_ front coupler device tc , hsrst_ spacer 3 , hsrst_ distributor 3 , hsrst_ contact plate

State Government

CTN :44949138

05 Jun, 2026 4.66 Lacs

Pune - Maharashtra

Tender For bid to ras bid to ras supply of mounting adapter , xyz translator , right angle bracket with counterbored slots and m6 tapped holes , ir detector card , adapter with external sm1 threads , xy stage , n bk7 bi convex lenses , 30 mm cage xy translator , sm1 threaded nir alignment disk , n bk7 bi convex lens , sm1 threaded 30 mm cage plate , cage rotation mount , cage assembly rod

CTN :45057581

04 Jun, 2026 9.50 Lacs

Farrukhabad - Uttar Pradesh

Tender For corrigendum : supply of fabrication and erection work e e - places , replacing wornout runner base and installing a new runner base of cane carrier and baggage elevator and r b c , replacing wornout runner with new one of cane carrier and baggage elevator and r b c , removing wornout angle iron and t iron of the cane carrier and reinstalling it by straightening the crooked part , removing the wornout part of the suit from different places and fitting it with new one , chevron grooving of new rollers of the mill , chevron grooving of old rollers of the mill , remove the wornout partition plates of the juice box above and below the juice heater by 10 or 12 mm ms plate and install it , installing ribs at the top and bottom partitions of the juice heater , repairing save all of qurdbody , removing old wornout gutters installed at various places and installing it with new gutters , remove the old wornout save all from pan and quard and install it with new one , reinstalling the new umbrella fitted inside the pan by making a new one and removing the old one , replacement ribbon arm of the mascute receiving crystallizer , making new separator of a centrifugal machine , removing the wornout truff of the hopper and installing it with new one , making and installing new separators for continuous centrifugal machines , removing the tubes of quad juice heater and dynamic juice heater and expanding them by installing new tubes and giving their hydraulic testing satisfactory of size 42 mm , removing the tubes of pan installing new tubes and expanding them and giving hydraulic tesing with satisfactory trial of size 96 mm , removing the wornout flue gas ducting of both the boilers and installing it with newone making from new or old plates , removing the wornout front and roof plate at boiler number 1 and 2 and installing with a new plate , removing the damaged boiler damper and installing a new one , making bagasse suit and installing. , replacement of juice over flow box of clarifier , making and installing bed of motor and pumps at various places as per requirement , replacement 6 inch dia cooling pipe of sulfur furnace , removing the monitor casing of a machine from old machine and installing it and giving its a trial , making amd replacing manholes at various places , making and replacing the enternals of cather of the pan. , making and replacing the new hood of cane cutter , removing the old bottom plate of the lowest compartment of the clarifier and placing a new plate on it after placing an angle trap as per the instructions and giving a satisfactory water trial , reinstalling the stirrer of the clarifier and giving a satisfactory trial , removing the shaft of a pug mill and replacing the old bushes on both sides and fitting new ones , removing and refitting the shaft of a brown sugar magma mixer and installing with new bush , reinstalling the trufff of connecting rod of the hopper , making and installing new catcher strainer , removing the old rail line of the trolley of the unloader and fitting the new rail line satisfactorily and doing water level , reinstalling the old rail line of the unloader s bridge and fitting it and checking water level etc , removal of old and weak channels of 3 inches to 10 inches diameter installed at various places and installation of new ones as per requirement , cutting and straightening old plates installed at various places as per requirement , removal of old and wornout scrubber installed on sulfur furnace and making and replacing with 8 or 10 mm plate and making all the connections , removing the trufff plate including support corroded shell and top cover plate of the top chamber of the clarifier and fitting the new plate and giving it s a water proof trial , re-installation alignment and //bid details 2 / 47 trial of hopper driving end , making and installing the top cover of the centrifugal machine , making an arm and installing it on the shaft of pug mill , making and installing scrubber and bot

Central Government/Public Sector

CTN :45335843

15 Jun, 2026 NA

Bhavnagar - Gujarat

Tender For supply, installation, alignment and calibration after fitment of base plate for spring testing machine. size -40x40x4 cm, material as per is 18752a, fe: 99.17%(+ or - 0.14% ) and mn: 0.83% (+ or - 0.20%) [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45302597

08 Jun, 2026 NA

Bangalore - Karnataka

Tender For tender for supply of fuel feed line blank -male , inserting tool , puller - shurlock-sl61 wt-m16 , dummy feed hose , special socket -alh-12437 , blanking plug for refueling valve , teflon dummy for fuel system , open end spsnner -thin 27 x 32 , blanking plate-fuel tank , fmt neck dummy plate , blanking plate bottom for aux tank , blanking plate top for aux tank , ncw dummy al welded , fmt tank side plate , rmt neck dummy cover , weighing beam , tow bar - aluminium -iss h1 , towing bar , trolley - mgb , tm engine trolley - turbomeca , alignment tool , wrench ext actuator assy , rigging tool-for direction control , spanner-tds , stand-tail boom , alignment tool , spacer-01 set of 4nos , protractor - issh1 , tab bending tool- iss h2 , rigging tool-clinometer mounting , assembly fixture , clinobar block , rigging fixture , alignment tool -for tds bracket , insertor - tds assy segment-3 , extrator - tds assy , drift , tow bar -wheel version , extracting tool -tail rotor assy , spanner - special , spanner - special , storage stand -floor board , special socket spanner , eo pod trolley , handling trolley -radar ant , desiccator removal tool-for eo pod , nitrogen purging valve -for eo pod , lifting sling-20 mm turretgun inst , lifting device assy , socket -for eo pod , media , media , static discharge pole , jacking tool , bucking bar , hoisting of alh , checking tool -strut-bracket assy , drill jig -for casing ring iss d , aris alignment fixture -ots , extractor , insertion tool , removal tool -support bush-trs , actuating media-upper control assy , ids lifting sling , base plate c-brg bush removal tool , extraction tool , moving table with wheels , installation trb stand , levelling bar , levelling bar , storage stand - mrb , locator -for stabilizer bracket , engine oil replenishment tool , holding tool ots and non ots mgb hsg , steeering arm , grip gaurd -grip collective stick , dail gauge holder -mra , spl socket spanner tommy bar 450 lg

Central Government/Public Sector

CTN :45283034

25 May, 2026 NA

Samastipur - Bihar

Tender For supply of fabrication & installation railing shutter size-8x8 feet= 01 no. a modern durable shutter withhigh quality ms steel section , lock plate, spring, baring, jalroll, angle, corn plate, motor plate, gear guider with labour charge and commissioning of shutter motorized moter(1.5 kw) with remote. providing cutting welding grinder, alignment and finishing as per site requirement to ensure proper movement of motorized shutter with proper frame structure. [ warranty period: 30 months after the date of delivery ] ]

CTN :45227064

08 Jun, 2026 NA

Jamalpur - Bihar

Tender For supply of silicon manganese plate 3 mm. size: - 1219 mm x 2438 mm x 3 mm material: is-3885 partl-1, grade-iv. [ warranty period: 30 months after the date of delivery ] ]

Manganese Plate Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

State Government

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector