Latest manpowers Tenders | Government manpowers Tenders

corporations/Associations/Others

CTN :45702242

07 Jul, 2026 17.03 Lacs

Kota - Rajasthan

Tender For regular operation and maintenance of street lights (with material) at all industrial areas under riico ranpur kota(for 2 years) - regular operation and maintenance of high mast light in ranpur , kota including supply and replacing the required material and labour etc. complete as per the following terms and conditions:- i at any moment a minimum of 90% of total fixture must be in order. the defective fixture must be repaired within 3 days, falling which deduction for number of light which are not functioning in the industrial area shall be made at one time of the rate (accordingly deduction for lights which are not functioning becomes two times of the rates from total payment due for total number of lights whose operation and maintenance was awarded to the contractor ). ii contractor shall arrange at his cost for put on & off the street light fixture at appropriate time regularly as per instructions of engineer-in charge. a register shall be maintained at riico/association office and complaint lodged must be attended by contractor within 24 hours. the person deputed by contractor shall attend the riico/association office daily and comply the instructions and attend complaints regularly. iii contractor will have to employ trained and qualified electricians for the work. iv corporation shall not be responsible for any kind of accident during execution of work. v contractor will be responsible for safety and security of fixtures and all concerned materials. vi contractor will be responsible for arrangement of all t&p required for the work vii cost of all labour and material like lamp / balllast wire etc. will be born by contractor. all material required for the work shall not be below the category-ii of concerned bsr item. contractor has to repair and maintenance of fixture with material in all cases like short circuit, phase to phase of jvvnl line etc. viii no extra payment will be made for fixing/removal of extra/existing fixture in the industrial area. ix contractor will be responsible for timely collection and deposition of electric bills of areas in each month. in case of delay in payment and jvvnl impose surcharge for delay payment the same will be recovered from the running bill fo the contractor. payment of electricity bill will be made by riico. x contractor will be responsible for rebate of timer provided by jvvnl. hence contractor will maintain the on/off system by timer properly. in case no rebate is provided by jvvnl due to failure of timer then rebate will be deducted from contractor payment. xi contractor will be responsible for any theft of electricity through poles and he will make necessary arrangements for this. in case of any theft is found suitable penalty will be imposed on the contractor. xii contractor will maintain cubical panel board and assessories fitted in it. in case of any fault repair/replace of material will be done by the contractor at his own cost. no extra payment will be made on behalf of material. xiii contractor has to keep ready total fixtures. in case of fault of fixture a penalty of rs.100/- per fixture per day will be imposed on the contractor., regular operation and maintenance of street light fixtures hpsv/ hpmv (70w/150w) in ranpur, kota including supply and replacing the required material and labour etc. complete as per the following terms and conditions:- i at any moment a minimum of 90% of total fixture must be in order. the defective fixture must be repaired within 3 days, falling which deduction for number of light which are not functioning in the industrial area shall be made at one time of the rate (accordingly deduction for lights which are not functioning becomes two times of the rates from total payment due for total number of lights whose operation and maintenance was awarded to the contractor ). ii contractor shall arrange at his cost for put on & off the street light fixture at appropriate time regularly as per instructions of engineer-in charge. a register sh

Central Government/Public Sector

CTN :45527421

03 Jul, 2026 NA

Visakhapatnam - Andhra Pradesh

Tender For corrigendum : tender for supply of hose clips worm drive size 12 mm , hose clips worm drive size 20 mm , hose clips worm drive size 25 mm , hose clips worm drive size 30 mm , hose clips worm drive size 40 mm , hose clips worm drive size 50 mm , hose clips worm drive size 60 mm , hose clips worm drive size 80 mm , hose clips worm drive size 100 mm , crow bar , wooden handle for hammer 1000 grams , hammer ball pein 800 grams , sledge hammer double face 3500 grams head , sledge hammer double face 6500 grams head , universal joint 0.5 inch d19 socket 1995 , wire nipper 150 mm , electrician screw driver size 150mm x5mm x0.8mm , screw driver insulated 150 x 8 x 1.2mm. , electrician screw driver size 200mm x 5.5mm x 0.8mm , electricians screw driver size 250 mm x 5.5 mm x 0.8 mm , screw driver insulated size 300mm x10mmx1.5mm , shovel with square nose nominal mass of blade 1.8 kg , binding wire gi 16 g as per is 4826 1979 , sealing wire 16 swg

State Government

CTN :45696341

29 Jun, 2026 2.06 Lacs

Chengannur - Kerala

Tender For p n n dev in sab gp monthly pooja in karkkadakam,chingam,kanni, thulam and onam festival in 1201 me 1202 me engaging electricians and mechanic grade i for day to day watch n maintaining elect installations machineries etc in pamba n nilackal

State Government

CTN :45696356

29 Jun, 2026 3.17 Lacs

Chengannur - Kerala

Tender For pnn devaswoms in sabarimala group engaging electricians for day to day watch and maintaining to the existing electrical installations n machineries installed in and around at off periods from 01 july 2026 to 31 oct 2026 in 1201n 1202 me

State Government

CTN :45696360

29 Jun, 2026 2.26 Lacs

Chengannur - Kerala

Tender For general sabarimala devaswom engaging electricians at sannidhanam during off periods from 01 july 2026 to 10th nov 2026

Central Government/Public Sector

CTN :45252971

22 Jul, 2026 372.00 Crore

Mangalore - Karnataka

Tender For corrigendum : establishment of six advanced modern skill laboratories at kalaburagi, gadag, davanagere, mangalore, bheemanakuppe (near kengeri bengaluru) and mysuru in karnataka state including design, supply & installation processes along with required modification or constructions in the existing building with interiors, hvac, network, electrical works and supply of manpowers for three years for training and maintenance on turn-key-basis.

CTN :45648058

07 Jul, 2026 NA

Chennai - Tamil Nadu

Tender For supply of pneumatic torque wrench spec as per annexure a in atc of bid document , reciprocating air compressor electric motor driven 10.0 to 10.9 kg per cm2 single phase spec as per annexure b in atc of bid document , reciprocating air compressor electric motor driven 10.0 to 10.9 kg per cm2 three phase spec as per annexure c in atc of bid document , bench manual feed 20 mm capacity drilling machine bench type or pillar type spec as per annexure d in atc of bid document , cutoff wheel dia 105mm , rust remover solution 300 ml , m12 plain washer , emery sheet grit size 120 , emery sheet grit size 180 , ms welding electrode 4mm , soldering iron , 4 digit backlit hand held true rms clamp meter , hand held 100 khz digital multimeter , half inch chrome plated ratchet , insulated pliers , alloy steel center punch , line tester , round m 8 medium grip screwdrivers , round m 3 electricians screwdrivers , miniature screwdriver set , iec 60900 insulated wire stripper , stainless steel chrome universal bevel protector , plain electrical glove 11 kv , welder gloves or gauntlets type 3 , mild steel split or cotter pin 2.5 mm , mild steel split or cotter pin 3.2 mm , adhesive super joiner tubes or synthetic glue , welding helmet , pointer stick extendable , mild steel welding electrode 1.6 mm , e 17 covered electrode , e 19.9 l covered electrode , tool saw blades or hacksaw blades , rubber ht tape , plain washer type b m16 , plain washer type a m8 , plain washer type a m 6 , plain washer type a m 10 , aluminium oxide arbor flap wheel , enamel paint remover spray , lcd display calipers , dark glass for welders screen arc current 220 , single beam or pole manual na for vernier height guage , chipping strong hammer , heavy duty high conductivity earth clamp , stainless steel soldering clamp holder , digital level , cable lugs size 90 mm , cable lugs size 4 mm

CTN :45654184

25 Jul, 2026 40.00 Lacs

Chhindwara - Madhya Pradesh

Tender For tender notice for contract for manpower supply for requirement of manpowers driver, helper safai mitra and technical staff for solid waste management and other related works in municipal council junnardeo

CTN :45585507

20 Jun, 2026 8.38 Lacs

Multi City - Telangana

Tender For purchase of rain coats, gloves and cotton aprons with radium and gum boots for sanitation workers, water supply workers and electricians in jagtial municipality under municipal general funds.

corporations/Associations/Others

CTN :45571488

19 Jun, 2026 12.52 Lacs

Multi City - Telangana

Tender For engaging to electricians on outsourcing basis in miyapur circle-48 in serilingampally zone in cmc for a period of 12 months i.e., from 01-04-2026 to 31-03-2027.

Manpowers Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

Central Government/Public Sector

State Government

State Government

State Government

Central Government/Public Sector

corporations/Associations/Others