Latest manual applicator Tenders | Government manual applicator Tenders

CTN :41275501

12 Aug, 2025 NA

Meerut - Uttar Pradesh

Tender For supply of pressure switch max three fifty bar seventy five degree c max sixteen a two hundred fifty v inventa high pressure washing plant , nozzle inventa high pressure washing plant , hose pipe with both end adaptor ten mtr inventa high pressure washing plant , starter dol type twenty five amp inventa high pressure washing plant , hose pipe for power pressure blaster p forty inventa high pressure washing plant , pressure gun inventa high pressure washing plant , pressure switch comec high pressure washing plant , nozzle comec high pressure washing plant , hose pipe ten mtr comec high pressure washing plant , spider l seventy comec high pressure washing plant , pressure gauge comec high pressure washing plant , o ring comec high pressure washing plant comec high pressure washing plant , plus pick up magnetic type hydraulic dynamometer engine test bed , load cell sensotronics hydraulic dynamometer engine test bed , temperature sensor pt hundred three w fifty to two hundred degree c hydraulic dynamometer engine test bed , torque meter sensotronics hydraulic dynamometer engine test bed , water pressure gauge zero to seven kg cm sq zero to hundred lb inch sq hydraulic dynamometer engine test bed , oil pressure gauge zero to seven kg cm sq zero to hundred lb inch sq hydraulic dynamometer engine test bed , water pressure pipe with both end adapter 8mm long hydraulic dynamometer engine test bed , oil pressure pipe with both end adapter six mm long hydraulic dynamometer engine test bed , flexible conduit pipe pvc half inch hydraulic dynamometer engine test bed , spider l ninety hydraulic dynamometer engine test bed , gland one to ten mm hydraulic dynamometer engine test bed ) /bid number : gem/2025/b/6516377 * /dated: 31-07-2025 & & / bid document 1 / 16

Central Government/Public Sector

CTN :41220347

06 Aug, 2025 NA

Bangalore - Karnataka

Tender For tender for supply of oleo restrainer-mlg , oleo restrainer-tlg , rigging tool (collective control installation) , rigging pin (cockpit controls installation) , angle (graduation) plate (cockpit controls installation) lh & rh (2 items) , angle (graduation) plate (cockpit pedal assy gunner) 01 set consists of 3 items.(pointer , lh & rh) , locking pin (to lock the floating link of pedal assy) , rigging tool (for cyclic stick neutral lock for lch-td1 , td2 , td3 & td4 position) , rigging tool (to chech the angular movement of the cyclic stick) , fuel drain tool , special spanner (electrical switches) , special spanner (electrical switches) , spl spanner (for bolt blade fork big) , bearing play checking tool (horz stab lh&rh) , holding fixture-collective co-pilot , wrench (torqueto lock nut sl61n) , wrench (control tube actuator assy) , rigging tool(fh tr lower rig) , adaptor (wrench for tra/mra filter) , spl spanner (main rotor actuator installation) , holding tool (control tube assy) , wrench extension - casing ring , torque tightening fixture(rod assy) , special spanner- wheel brake assy , special spanner- acuator assy unit , spl spanner(non ots ids nut 26 a/f) , spl spanner(non ots ids- rod assy) , spl spanner(non ots ids nut 33 a/f) , spl spanner(non ots ids-thred tube) , locator (for stabilizer bracket) , blanking plate (breakaway coupling) , bleed adapter for air conditioning bleedingair checks , master cylinder filler unit adapter , oil seal pressing tool (igb assy) , oil seal insertion tool (igb assy) , insertion tool (tgb assy) , seal pressing tool (tgb assy) , hexagon head with pin for eo pod , extended allen key-eo pod , special tool (shurlock puller) , mandrel with nut , seal pressing tool (tgb assy) , media-tds alignment , levelling bar (for h/c levelling ) , levelling bar (for h/c levelling ) , levelling bar (for h/c levelling ) , insertion tool , insertion tool for oil seal (igb) , plug for rigging tool(tr) , dummy feed hose (power plant) , inst/removal tool (firewall) , alignment tool (tds bracket & igb) , pressing tool (oil seal tgb ) , defuelling hose and adapter

Central Government/Public Sector

CTN :41242922

19 Aug, 2025 NA

Tekanpur - Madhya Pradesh

Tender For supply of insert holder,straight cylidrical collet,straight cylidrical collet,straight cylidrical collet,straight cylidrical collet,straight cylidrical collet,straight cylidrical collet,straight cylidrical collet,straight cylidrical collet,e r collet for cnc milling conical,e r collet for cnc milling conical,e r collet for cnc milling conical,e r collet for cnc milling conical,e r collet for cnc milling conical,e r collet for cnc milling conical,insert screw ssa 3t,torque key,insert screw for cnc milling,insert boring ccmt 090304 tn 4000,insert boring ccmt 060204 tn 2000 4r,insert ccmt 090308 mu tn 2000,insert turning cnmg 120408 8r tn 4000,od turning insert dnmg 150604 22 tn 2000,od turning insert dnmg 150608 22 tn 2000,insert turning cnmg 120408 8r tn 4000,insert od turning tnmg 160404 tn 4000,od turning insert vbmt 160404 tn 4000,parting insert 44315524 tn 4000,boaring insert ccmt 060204 tn 2000 4r,boaring insert ccmt 090304 tn 4000,internal threading bar or boring,internal threading,internal threading bar,boaring b

State Government

CTN :41217191

18 Aug, 2025 NA

Kheda - Gujarat

Tender For supply of mechanical measuring instruments & spanners (tools & tackles) at wtps - digital outside micrometer with large digital display. size : 0 - 25mm, resolution: 0.0001 mm., digital outside micrometer with large digital display. size : 25 - 50mm, resolution: 0.0001 mm., digital vernier calipers size - 0-300 mm mitutoyo make, allen key set black finish of mm series having sizes 1.5mm ,2mm,2.5 mm ,3mm ,4mm ,5mm ,6mm , 8mm , & 10mm allen keys, taparia make: allen keys (mm.sizes) black finish ,is 3082-1988 sizes- 12 mm,14mm, 17mm, 19mm, 22mm, 24mm, adjustable spanners , 110 mm length ,least max. opening 13 mm, chrome plated, with soft grip, chain pipe wrench, taparia product no: cpw 06, length:1000 mm, suitable for pipe dia. 150 mm, hss drill bit set 3 mm to 12 mm, weighing scale digital, polyester webbing slings with reinforced eye loop at both ends as per en 1492-1 size 125mm x 5t x 3mtr x red, polyester webbing slings with reinforced eye loop at both ends as per en 1492-1 size 125mm x 5t x 5mtr x red, copper round bar of size 40mm x5oo mm long, polyester flat belt webbing sling with plain eye loops at both ends, conf. to bs: 3481/part-ii capacity: 5 ton, std length: 5 mtrs, bolt cutter length-450 mm, chain pulley block cap-1 ton x3 mtr lift, chain pulley block cap-2 ton light weight, chain pulley block cap 3 ton, lift: 4.5 m, mitutoyo make dial gauge with magnetic stand : 0-10mm, steel wire rope sling with soft eye splice at both ends conf. to is: 5245/part-ii capacity: 10 ton, rope dia: 32 mm, std. length: 2 mtrs, taparia make t handle hex key. product no. tak 5., taparia make t handle hex key. product no. tak 6., torque wrench standard generally confirming to is 6789:2008 mac master product no-tw-2000r (range-1000-2000 lb.ft/135-275 kgf.m/1350-2700 n.m), torque wrench standard generally confirming to is 6789:2008 taparia product no-tw1000 (range-400-1000 lb.ft/55-140 kgf.m/540-1380 n.m), allen key set black finish of inch eries having sizes 1/16" , 5/64" ,3/32" , 1/8",5/32",3/16",7/32",1/4",5/16",3/8" allen keys, grease gun, polyester webbing slings heving specification capacity- 1tons,length-3mtr and width-50mm (max), screw spanner-12", non sparkable fixed spanner set : size: 6x7,8x9,10x11,12x13,14x15,16x17,18x19,20x22,21x23,24x27,25x28,30x32., fix spanner size 12x13 mm ., ring spanner size 12x13 mm, fix spanner size 10x11 mm, jhalani/tapariaring spanner 10x11 mm, fix spanner size 14x15 mm jhalani make, fix spanner 16x17 mm, jhalani/tapariaring spanner 16x17 mm, fix spanner 18x19 mm, jhalani/tapariaring spanner 18x19 mm, fix spanner size 24x26 mm, ring spanner size 24x26 mm, fix spanner 30x32 mm, ring spanner 30x32 mm, steel wire rope sling with soft eye splice at both ends, conf. to is: 5245/part-ii capacity: 1 ton, rope dia: 10 mm, std. length: 3 mtrs, steel wire rope sling with soft eye splice at both ends conf. to is: 5245/part-ii capacity: 2 ton, rope dia: 16 mm, std. length: 3 mtrs, steel wire rope sling with soft eye splice at both ends conf. to is: 5245/part-ii capacity: 5 ton, rope dia: 22 mm, std. length: 5 mtrs, circlip plier external (bent nose),product no: 1444.7,capacity :19.6 mm, length:180 mm, taparia or jhalani or any equivalent make, internal circlip plier size 8" no1440 taparia make, two stage two gauge acetylene gas pressure regulator model : dura a-1.5 - esab make, two stage two gauge oxygen gas pressure regulator - model no : dura 0-10 - esab make, hanna make tds tester (0-2000 ppm), model: hi98301, hanna make ph meter, model: hi98107

Central Government/Public Sector

CTN :41245292

13 Aug, 2025 NA

Mumbai - Maharashtra

Tender For 1-inch square drive pneumatic impact wre [1-inch square drive pneumatic impact wrench along with accessories required to connect with the compressed air supply line. specifications: (a) free speed:5500 rpm or more, (b) blows per minute:700 or more, (c) forward torque:2715 nm or more, (d) reverse torque :2850 nm or more, (e) drive type: rear handle,(f) drive size: 1 inch, (g) style: rear handle, (h) retainer type:ring .the following accessories should be supplied along with each impact wrench (1) polyurethane recoil hose, size:12 x8 mm, end fittings:1/4 inch and 1/2 inch, length:10 mtrs, qty.01 no,(2) frl, size:1/2 inch bsp, wp:10 kg/cm2, max flow:3400 lpm, qty.01 no, (3) 1/2 inch adapter, qty.02 no s (4) 1/2 inch quick release coupler, qty.02 no s, (5) 1-inch square drive extension bar, length:6 inch, qty.01 no, (6) 1-inch square drive impact socket, a/f.60mm, qty.02 no s, (7) tune up kit, qty.02 sets. make (or) model of the impact wrench: ingersoll rand (2850 max) or equivalent in soartec industrial cord,(or) atlas copco (or) fuji (or) desoutter. note: authorized dealers should participate. ]

CTN :41146417

11 Aug, 2025 NA

Gaya - Bihar

Tender For supply of aircraft securing waterproof cover , pop aircraft colour light , grinding stone , bosch drill machine , bosch cordless drill machine , water electric motor , bench wise , torque wrench , screw driver set , cutting player , nose player , 2 step plastic stool , towing bar , 1x1 plastic box , 2x2 plastic box , extension board , aircraft washing motor

corporations/Associations/Others

CTN :41170192

30 Jul, 2025 NA

Basti - Uttar Pradesh

Tender For supply of engineering material for sugar mill season 2025-26 - cane unloader grab pump k2r45 , hydraulic cylinder for grab, hydraulic cylinder seal kit, different size hydraulic hose pipe for cane unloader, main line oil filter, return line oil filter, main oil filter for hydraulic pump 230 lpm, hydraulic pump for ct, hydraulic pump err 130 , electric coil for pvg block, filtration system, hydex coupling 65, hydraulic pump case , over centr valve oil cooler 250 lpm c hose pipe set., pvg 32 valve block , rg kit yoke assembly c valve plate of pump err 130, break drum coupling, lt wheel with l type bracket complete set, solenoid valve 24 volts , pressure sitch valve for trolley c grab, high torque hydraulic drive assembly, hydraulic motor with high torque load holding valve, hosting/ holding gear box, ac fan for oil cooler, castal nut m-30 for rake carrier, coupling for mill drive to planetary gear box, vako seal for mill hydraulic ram, different size plate ( ms c spring steel), ms angle 75x75x6, en 9 square bar 65x65, gear box for lab crusher

CTN :41161370

12 Aug, 2025 NA

Saran - Bihar

Tender For supply of hydraulic motor model no. - omt 315, code : 11152838 with following specifications:- directi on of rotation : bi-directional speed range : 245 rpm displacement size :- 315 cc flow : 125 lpm pressure range : 200 bar torque : 1220 nm frame size : 315. make : danfoss or equivalent [ warranty period: 12 months after the date of delivery ]

corporations/Associations/Others

CTN :41117364

18 Aug, 2025 3.97 Crore

Bengaluru - Karnataka

Tender For procurement of special power tools - rotary drilling machine with drill bits (speed-0-2800 rpm), rotary drilling machine with drill bits speed-0-630 rpm, rotary drilling machine with accessories (speed-0-2600 rpm), jigsaw machine with accessories (stroke rate-500-3100 spm), impact wrench (torque max.-400 nm), high pressure washer-heavy duty (maximum pressure-140 bar), electric sander (speed-4500-12000 rpm), cut off machine (speed-3800rpm), cordless screw driver cum impact wrench torque max.-200 for tightening screw, cordless rivet machine (solo) (stroke length-25mm), cordless impact wrench with accessories torque max.-200 for tightening bolt & nuts, cordless impact wrench with accessories torque max.-1600, cordless impact wrench with accessories torque max.-1050, cordless impact wrench with accessories auto shut off 2500rpm, cordless impact wrench with accessories speed-860 rpm, cordless drill driver with accessories speed-0-460rpm and 0-1800rpm, for drilling purpose, cordless drill driver auto shut off torque -30/9 (hard/soft) speed-0-1400 rpm, cordless drill driver (torque max. (hard/soft)-5/2 nm), cordless blower speed -17000 rpm, cordless angle grinder with accessories speed-9000 rpm, corded polisher/sander speed-750-3000 rpm, circular saw machine speed-5200rpm, angle grinder speed-11000 rpm

CTN :39038232

02 Aug, 2025 13.18 Crore

Gandhinagar - Gujarat

Tender For corrigendum : supply of goods, tools & equipmentforan international standard itotin mechanic motor vehicle (mmv) tradeat iti tarsali, gujarat, india (package 3: mmv trade) - alternator assembly used for lmv working condition demonstration kit , starter motor assembly used for lmv working condition demonstration kit , electronic engine control module , fuel pump for mpfi working condition demonstration kit , inline fuel injection pump and rotor type fuel injection pump , demonstration board of 2wheeler ignition system. , demonstration board of electronic ignition system. , working condition of petrol mpfi engine assembly with fault simulation board , mpfi petrol engine with swiveling stand along with special tools for dismantling and assembling , demonstration board of mpfi system , ultrasonic injection cleaning equipment , working model of power windows , petrol engine motorcycle/scooter along with special tools and accessories , four stroke multi cylinder diesel engine in working condition , four stroke four cylinder crdi diesel engine in working condition , functional/experiment model of different type of sensors. , auto electrical test bench , cut section model of mock layout of a motor car -electrical system - working model , cut section working model of single plate clutch assembly. , cut section working model of diaphragm clutch assembly. , cut section working model of centrifugal clutch assembly. , front axle ( rezeppa joint) with stand for dismantling and assembly , rear axle with stand for dismantling and assembly , cut section model of synchronous gear box working , cut section model of sliding mesh gearbox working , cut section model of constant mesh gearbox working , full floating axle and semi- floating axle assembly , cut section working model of automatic transmission gear box , steering assembly - , 1. rack& pinion, , 2. worm& roller , 3. recirculating ball , 4. power steering , wheel alignment set up instrument-computerized , brake testing equipment (to test efficiency of vehicle where motion after braking is plotted) , motor vehicle in running condition (diesel heavy) with hydraulic power steering , light motor vehicle diesel crdi with electronic power steering and car a/c , engine dynamometer , four stroke multi cylinder engine mpfi petrol with cng kit set up in running condition , four cylinder four stroke diesel engine test rig with rope brake dynamometer , exhaust gas analyzer - diesel , training setup for adas systems , 4-wheel alignment set & hoist with advanced driver assistance systems (adas) complete frame targets , steel toolbox with lock and key (folding type) , punch letter , outside micrometer (0 25) , outside micrometer (25 50) , outside micrometer (50-75) , outside micrometer (75-100) , inside micrometer (25-50) , depth micrometer (0-25) , thread micrometer , adjustable micrometer sprit level to measure flatness, indication and taper with prismatic measuring base , vernier caliper , digital vernier caliper , vernier depth gauge , vernier bevel protractor, least count 5minutes , telescope gauge , dial test indicator plunger type (complete with clamping devices and stand) , universal surface gauge , cylinder bore gauge , compression testing gauge suitable for petrol engine. , vacuum gauge , granite surface plate , work bench , spanners socket with speed handle, t-bar, ratchet and universal , magneto spanner set , cylinder ridge cutter , vice grip pliers , torque wrenches , pneumatic tools set , car jet washer , pipe flaring tool , pipe cutting tool , universal puller for removing pulleys, bearings , stud extractor set of 3 , stud remover with socket handle , paraffin pressure gun , hand reamers adjustable , straight edge gauge , straight edge gauge , ladle , electric soldering iron , wire gauge (metric) , digital multi meter, 3 % digit (min), diode test mode and continuity mode, , growler , hydrometer , battery analyzer with printer , carburetor - solex, mikuni for dismantling a

Manual Applicator Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

State Government

Central Government/Public Sector

corporations/Associations/Others

corporations/Associations/Others